Library groups issue

We have a requirement from a user, which is for a simple SharePoint site with 7 libraries. As part of this, as a best practice, we went ahead and created the top site and created the 7 libraries. For the permissions part, we have 3 groups at
the site level now.. site owners, site members, and site visitors....
For the 7 libraries, can we implement similar groups - library 1 owners, library 1 members, library 1 visitors? If that is the case, the list would be huge and in the near future if there is any subsites/libraries in this site, it may become very difficult
to manage the sharepoint groups in the site. Could somebody please help me on how to manage the permissions here?
Shonilchi..

Hi Shonilchi,
Per my knowledge, we cannot create groups in the library level in SharePoint. If we use the groups created in site level for the library permissions, then the users inside the group will have permission on the site too.
If you want to only grant unique permission on the library level, then you need to Stop Inheriting Permissions in the library permissions and then delete all the permissions for the users. After that you can grant unique permission to the users in the library
permissions.
If you need to use a group for managing the permissions in the library, then you can use security groups in Active Directory instead or use the groups in SharePoint if you don’t mind their permission on the site.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Similar Messages

Report with grouping issue

I have a report which have year(2008), Category(0-1,2-3, ALL), product(0,1,2,3,4..), % sales. I group by all the category elements and called it as All, I am not getting the right percentage sales for the Category ALL other wise for 0-1,2-3 i am getting it right. Please advise where i am doing it wrong. please find the blog for a screen shot of my issue.
http://ravibiblog.blogspot.com/2012/04/report-with-grouping-issue.html
Thanks,
RC

Pl post details of OS, database and EBS versions. Pl see if these MOS Docs can help
FARXPBSH Failing With "Program was terminated by signal 11" or "Program was terminated by signal 10"          (Doc ID 742729.1)
Publishing RXAPPYAC: The FARXPBSH Ends With 'Signal 11' Error          (Doc ID 432797.1)
RXi RX Reports Failing With Program Was Terminated By Signal 10 or 11 Errors After FA Rollup Patch 6          (Doc ID 737963.1)
Program was Terminated by Signal 11 when Running Rxi Reports          (Doc ID 559425.1)
HTH
Srini

Sorting /Grouping Issue: Single Artist Compilation Album Doesn't Group

iTunes 8 Sorting / Grouping Issue
EXAMPLE
• Album: Essential Willie Nelson
• There are 22 songs on this Disc
• 19 of them are labelled "Willie Nelson" in the artist field
• 3 of them are lebelled "Willie Nelson Feat. Waylon Jennings" in the artist field
PROBLEM
• Album will not stay grouped together when in the standard "Sort by Artist" in Grid View. A very legitimate expectation to be able to have Willie's name listed along with his pals in the artist field and have them grouped together in one album within Willie's albums section. 19 songs group within one album in the Willie Nelson section and the other 3 are placed separately either in the compilation section or as separate albums within the regular artists grid view.
I've read most if not all postings that suggest solutions but no matter what... they don't work. The only way that I know to work is to strip out all other names and leave only "Willie Nelson" in the Artist field. All other sorting and grouping options don't work for this issue... I've tied every combination. My opinion is that this is just a limitation at this time and there is no solution until future updates. I don't want a cheezy work-around either, that's very "unApple like". I assume it to be fixed in future updates.
Bueller... Bueller?
Anyone?

There's a few other "goodies" I have found also but haven't had time to check out.
If you have songs not in iTunes that you want to add to iTunes in a different format than the song is in...
(This is carried over from at least 7.4)
Set the Importing prefs to what you want the new file to be.
Hold the Option key and go to menu Advanced and select *Convert selection to* AAC (or whatever is in the Import prefs}.
This will add it to iTunes in the new format.
Previously, you had to Import the file, change the prefs, go to Advanced - *Convert selection to*, convert the file, then delete the original from iTunes.
This is new...
In iTunes 8, go to to File - > *Show duplicates*. (moved from View menu).
Now hold Option and go to to File and it now displays *Show exact duplicates*.
Don't know what it means by *exact duplicate* though.

Group Issue

HI Gurus,
My client is following this scenario.It has make to Order scenario and so many subcontracting process is done by the client.
The scenario is like,multiple work Orders are sent to Subcontract Vendor through single Group Issue.
For Example: 5 different work orders have the same processing work and has to be carried out by SC vendor X.
What they are doing, they donot issue the materials to the same SC vendor 5 times instead they make a group of the work Orders and issue the materials to SC at a time.
How can we map this into SAP????????
Thanks & Regards
Pranaya

Hi
In MB1B , you can club all the PO's & issue the Goods to the SC vendor.
Goto MB1B, enter movemnt type 541, Click on To Purchase order & enter the PO & item details. Now adopt the details & issue the Goods to SC vendor.
Thanks & Regards
Kishore

What to do when "library has issues that require rebuilding to correct"

What to do when you get message "library has issues that require rebuilding to correct"?

Rebuild. What version of iPhoto are you running? If it is iPhoto 9 or later Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
OT

In a document library : group by view and manage metadata filter & Navigation problem

Hi all, I encounter a problem when configuring a document library using a group by view and in combination with the Managed Metadata filtering and
navigation :
- all the documents appear under my group by, even the ones that does not correspond
- In the other hand, the number in brackets shows the correct number of documents that should be shown
See screenshot below.
Did you already encounter that issue ? Is there a workaround ?

Hi,
According to your post, my understanding is that you wanted to use a group by view and combine with the Managed Metadata filtering and navigation in a document library
to show the corresponding documents with the correct numbers in SharePoint 2013.
In my SharePoint 2013, I created a view which was group by two columns and combine with the Metadata Navigation Hierarchies and Key Filters some fields in a document
library. As a result, it showed only items matching the filter values.
So, I recommend that you can follow the steps to implement it in your environment.
Step1: Enable Metadata Navigation and Filtering:
Metadata Navigation and Filtering is a Site Feature that has to be activated for this to work.
And, the Metadata Navigation and Filtering feature is enabled by default on most sites.
If it is not enabled for your site, you can enable it on the Site Features pages for your site.
You must be a Site Owner or a Site Collection Administrator to enable Metadata Navigation and Filtering.
1. Go to “Site Settings” and click “Manage site features” under Site Actions.
2. Find “Metadata Navigation and Filtering” in the Features list and click “Activate”.
Step2:
Configure Metadata Navigation:
You must have a least the Manage Lists permission level to configure metadata navigation for a list or library.
1. Open the document library for which you want to configure metadata navigation.
2. Go to “Library Settings” of the document library and click “Metadata navigation settings” under “General Settings”.
3. In the Configure Navigation Hierarchies section, select the field or fields you want to display in the navigation hierarchy and then click “Add”.
4. By default, Folders are automatically displayed in the navigation hierarchy. If you do not want folders to display, select Folders, and then click Remove.
5. In the Configure Key Filters section, select the fields you want to add as Key Filters, and then click “Add”.
6. In the Configure automatic column indexing for this list, specify whether you want to automatically create indices on this list to increase the performance of the
queries that users will perform when they use the Navigation Hierarchy and Key Filter columns you've specified. It is recommended that you select the option “Automatically manage column indices on this list”.
7. Click “OK”.
Step3: Set a group by two columns by modifying view in the document library:
1. Go to the “LIBRARY” ribbon of the document library and click the “Modify view”.
2. Click the “Group By” and select up to two columns to determine what type of group and subgroup the items in the view will be displayed in.
3. Click “OK”.
Step4:
Go back to the document library, apply Navigation Hierarchies and Key Filters to do a test in your environment.
The result will like as below:
There is an article about how to apply Metadata Navigation Filtering in SharePoint 2013 for your reference.
http://blogs.interfacett.com/how-to-apply-metadata-navigation-filtering-in-sharepoint-2013
Best Regards,
Linda Li
TechNet Community Support

AD security group issues in SharePoint 2013 Integrated Mode

Hello,
Sorry if this is the wrong forum, I'm not sure if this is a SharePoint issue or a Reporting Services configuration issue (or if it should be in a SharePoint forum regardless).
I have SSRS2012 on SharePoint 2013 in integrated mode. We are doing item level permissions, which means we have an AD security group Reports-All with
Read to the Reports document library, then each actual report has unique permissions. We have a report with the ProjectManagers AD
security group on it with Read (plus some other stuff to let them manage subscriptions), and another AD security group ProjectUsers with
just Read access so they can open the reports. The data source used by this report has the AD security group I mentioned before, Reports-All,
with Read.
At a SharePoint level, things appear to work. When a user in ProjectManagers or ProjectUsers browses
to the library, they see only the 3 reports that those two security groups have permission to see (out of a lot more in the library). That means SharePoint is reading those security group memberships correctly as far as I can tell.
The issue is when a user in ProjectManagers or ProjectUsers clicks
on a report, they get a reporting server based error message, and the ULS logs have an error specific to the user trying to run the report.
Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'MyDomain\MyUser' are insufficient for performing this operation. (Fault Detail is equal to Microsoft.ReportingServices.ServiceContract.RsExceptionInfo)
If I add that specific user with Read permissions to the report and the data source, they are then able to run the report without errors. It seems like some Report Server component is not liking the fact that I'm using security groups.
Has anyone seen this behavior with AD security groups? Any ideas on why my environment does not want to work properly with those even though AD security groups are working fine for other non-Reporting Services files?
Thanks,
Aaron

Hi aaronzott,
According to your description, you configured SSRS 2012 of SharePoint integrated mode. You added read permission to reports and data source to AD security group Reports-All, then added just read permission to ProjectManagers and ProjectUsers groups. When
users in ProjectManagers or ProjectUsers groups click report, the error message occurred. After you added Read permissions to the report and the data source to the groups, they can preview the report without errors.
Report definition permissions are defined through List permissions on the library that contains the report, but we can set permissions on individual reports if we want to restrict access. Set properties on a report including data source connection information,
processing options, and parameter properties. Edit Items on the library that contains the report or on the individual report. We also need to have view permissions on a shared data source (.rsds) to select it for use with the report.
For more information about Set Permissions for Report Server Operations in a SharePoint Web Application, please refer to the following document:
http://msdn.microsoft.com/en-us/library/bb326286(v=sql.110).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

Sharepoint 2010 Document Library Group Filter

I am having difficulty grouping my documents without folder by grouping by. I would like to use the expand or collapse feature. I have several documents that are need to be group together and have a separate sub group of folders that will not allow me
to have to type each content in the sub groups.

Hi,
Per my knowledge, when we apply the group by feature in the view, the documents would group by the column which you had chosen as below.
When we upload a file to the library, the file would auto group by in the library.
Could you explain more details about your issue? It will be better if you can give us a print screen.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Grouping issue vouchers items in an invoice

Hi all
I'm developing an inventory and sales system , I have a master detail form for issue vouchers issued to customers, the master block contains the columns voch_no (issue voucher no) and the customer_no from issheads table and the detail block contains voch_no, stock_code,quantity and price colums from isslines table.
Each customer may have more than one issue voucher, and each issue voucher may have more than one item.
I have another form, the invoice form (also a master detail just like the issue voucher).
What i hope to do is when the user creates a new invoice for a specific customer, he shouldn't create the invoice items himeself, but he should select some issue vouchers that belong to that customer (better to be multi select), then the invoice items will be created automatically to get the sum(quantity) grouping a line for each item by stock_code,price.
The issue voucher numbers related to each invoice should be saved in a table for later updating.
my question is :
1-Should i create a new table that contains all the nmbers of the issue vouchers related to the invoice no ?
2- how can i handle this in forms builder ?, should i create a new form, or can i achieve this in the invoice form itself and how?
Please help

Thank you!
You're probably right, I might be talking about a feature of the sistem I'm using. Actually I'm not sure if I have access to database but probably not, I work at Xerox in Brasil and would like to know a little bit more about Oracle, with out have to ask my boss all the time. I work with record receipts of different species have lost much time trying to find repeating items on invoices. Sometimes we have interface issues, some items don't go to WIS (warehouse information system) after it registers on Oracle, so we have the physical part but it's not in the report storage
My boss once told me he would teach me a way to see items of an invoice (repeting or not) after it registers on Oracle, but he is too busy, so I'm trying to find out by myself. If it helps, the systems responsability is Oracle applications - OSPD and my security group is standart.
I'm sorry if my english is not that good I feel that my words seem a little confusing to you...
Did you understand what I mean? Hope you did, and hope you can help.
Thanks once again for your interest in helping me I really aprecciate it.
Regards,
Maria Carolina.

Grouping Issue - Siebel related

Hi All,
Am facing an issue in one of the reports. Below is the scenario.
I need to group my Contact list report on "Country" field which is not a direct field in Contacts. It is coming from another Business Component in Siebel which is "Personal Address".
This is not working. But when I try to group the report based on a field which is a direct field from Contacts, it is working fine. (Ex: Contact Name)
Am unable to achieve this. Kindly help me with this.
Thanks in advance,
Imtiaz.

Since your country details are under contacts, use the correct path for regrouping.

Outlook 2010 Contact Group Issue

We have a Public Folder Distribution List (Contact Group) that is accessible to several users. There are two significant issues:
When changes are made to the list, they are not always saved. For example if I enter a contact "Jon Smith" with email information, and then realize it should be "John Smith" and correct it, in many cases when I next open/use the
list the contact info has reverted back to "Jon Smith". This appears to occur at random.
Returning emails sometimes have sender addresses that are incorrect, i.e. an item sent to "John Smith" (a list member) will reach him, but his reply comes back as "Don Jones"
In addition, we get locked out of this list at random intervals. Our environment is Exchange Server (I believe it's 2010, not 100% sure) and Outlook 2010 clients.
Any insight is appreciated.
Thanks,
Steve Macey

Hi,
So this is a Public Folder Distribution List, please first check if you have the right permission to update it.
Any other users having the same issue? Please share me the exact steps of how you modify the email information in the Contract Group.
For the second issue, do you mean it's only the name that displays incorrect, but the email address is actually right? Please check if you have the "Don Jones" contact (in your case) in your address book, which has the same address info filled as "John
Smith", the expected one.
Thanks,
Ethan Hua CHN
TechNet Community Support

Aperture 3 not in Media Browser - Non-Default Library Location Issue

Hi Everyone,
My Aperture Library cannot be viewed in the media browser. I created a new Aperture library in the default location which resolved the issue; however, I have my library on an external hard drive and it is too big to put on my internal HD.
Any suggestions on how to tell iLife & iWork to look in my external HD?
Message was edited by: ZerbyPhotography

Hello Everybody,
Ok...I went to the Genius Bar, but to no avail. (by the way, my issue about not being able to open programs while holding alt was due to my not depressing the alt key for the required length of time. So, false alarm on that one. Oops!)
I just updated to 3.0.1. I continued to have the same issues with accessing my files through the media browser. I called tech support; and through their instructions, I was able to gain access to my library through the media browser. This seemed to be by accident, so I don't know if it was due to the update, a particular logarithm of library selection, or a combination of the two.
What I remember being the last actions were to create an alternate library, >file, >>switch to library, >>>other, select the new library, (possibly restarting Aperture), then switching back to my main library through the same selection as previous (i think...possibly by a different method).
Regardless, my library is now accessible in the media browser in iLife & iWork programs.

Material group Issue for Maintain specific EBP Purchasing org

Hi Grus
Can any one help me on this issue, is it possible to maintain some specific material group to one EBP purchasing org.
your answerer will be rewarded.
Thanks & Regards
Sada

Teja Provided some usfull document.
Thanks Teja
Sada

Purchasing group issue

Hi,
I am trying to assign an output type for PO printing to a P.Grp using T.Code MN04.I already assigned it but the output is not getting determined in PO.Where as, if I do the same thing for any other P.Grp. its easily getting determined.
The issue is only with one P.Grp.
Can you please suggest what can be the problem?
Ashish

Hi
Check, if you have created the Output determination using the Txn MN04, If you try to create the same combination again in MN04 it should not allow you. Check the condition Recodr details in MN05 in the second screen enter the Doc. tyep /Purchase orgn/vendor which you have already created and execute you should be able to view the detailsinside if not then the condition is not there.
mean whil how did you create an output type condition record based upon Purchasing Group ? The existing Key combination does not contain any Pur grp. reference but Only Purchase Organisation only
for two of the selections.
Regards

DB-Library BCP issue with SQL Server 2014

Hello,
My application uses DB-Library (ntwdblib.dll) to communicate with SQL Server 2014. We are having issues calling bcp related functions like bcp_init which always returns FAIL status. Our application was working fine with SQL Server 2012 and all other previous
SQL releases. But we are getting below error in SQL 2014,
msg 4801, state 1, severity 16 : Insert bulk is not supported over this access protocol.
Can anyone please help ?
Thanks,
Himanshu

Hi Himanshu_kus,
Is this still an issue, or can we close the thread?
[Personal Site] [Blog] [Facebook]

Library groups issue

Similar Messages

Maybe you are looking for