License problems with RAID systems

We are running a Labview vision 8.0 application on a XP SP2 system with RAID controller. The purpose is to be able to quickly recover from any harddisk problems. Do I have to reactivate the licenses when I swap the harddisks?

Hi,
As your RAID controller is just an external harddrive, the vision license is essentially running on the same machine so the same license can be used on different controllers.
There's no need to deactivate for each controller, as long as the license is being used on one system I don't believe you would be violating the licensing agreement.
Sarah
Applications Engineer | National Instruments | UK & Ireland

Similar Messages

Workstation specs -- Any problems with this system quote?

Here are the specs I have been quoted. I'm not terribly knowledgeable about hardware, does anyone see any problems with this system? I have recently started shooting and editing weddings, engagements and corporate videos. I think it may be bit more than I need, but I would much prefer that to less than I need. Any input from the more tech savvy users would be much appreciated.
Darren Breckles
65539
ASUS Sabertooth X79 ATX LGA2011 DDR3 3PCI-E16 2PCI-E SATA3 USB3.0 SLI CrossFireX Audio Motherboard [Sabertooth X79]
72374
Mushkin Enhanced Blackline Frostbyte 32GB 4X8GB PC3-12800 DDR3-1600 CL10 Quad Channel Memory Kit [994055]
64540
Noctua NH-D14 SE2011 LGA2011 Heatpipe Cooler w/ NF-P14 140mm & NF-P12 120mm PWM Fans [NH-D14 SE2011] [Reg. $89.99]
67678
Intel 520 Series 240GB 2.5in SSD MLC 25nm SATA3 Solid State Disk Flash Drive OEM [SSDSC2CW240A310] [Reg. $279.99]
4729477
8 port internal via 2X SFF-8087, LSI2208 1GB cache, 6Gb/s, RAID 0/1/10/5/50/6/60 [RS25DB080]
1
84358
MSI GeForce GTX 770 OC Twin Frozr IV 1098/1150MHZ 2GB 7GHZ GDDR5 2xDVI HDMI DP PCI-E 3.0 Video Card [N770 TF 2GD5/OC] [Reg. $429.99]
62678
ASUS BW-12B1ST Blu-Ray Writer 12X BD-R 16X DVD+R SATA Black Retail [BW-12B1ST/BLK/G/AS][Reg. $89.98]
Environmental Fee $0.75 Per Item
45275
Microsoft Windows 7 Professional Edition 64Bit DVD SP1 OEM [FQC-04649] [Reg. $153.98]
75044
Fractal Design Define R4 ATX Tower Case Black Pearl 2X5.25 8X3.5INT No PSU Front 2XUSB3.0 Audio [FD-CA-DEF-R4-BL] [Reg. $119.99]
77641
Corsair AX860 860W ATX 12V V2.31 80 Plus Platinum Modular Power Supply Active PFC 120mm Fa *IR-$10* [CP-9020044-NA] [Reg. $189.89]
49665
nMedia ZE-C118 3.5in Multi Function Panel Flash Card Reader W/USB2.0 eSATA SDHC2.0 Win 7 Black [ZE-C118 ] [Reg. $19.99]
58276
StarTech.com 3.5in Hard Drive to 5.25in Front Bay Bracket Adapter [BRACKETFDBK]
78186
Noctua NF-A14 FLX 140mm Ultra Quiet Cooling Fan 900-1200RPM 115.5M3/H 19.2DBA 3-PIN [NF-A14 FLX] [Reg. $22.99]
4
22823
Premium PC Assembly and Testing With 1 Year Limited NCIX Warranty (PRE-CONFIG WIN. OS If Purchased)
Environmental Fee $3.00 Per Item
Note: Includes extra attention to cabling, lighting installation and extra burn-in period. Recommended for windowed cases. Assembly requires an additional 4-5* business days to ship once all parts are in stock. *typical lead time (currently 2-5 business days)
1
$3.00
73920-1
NCIX 3 Year On-Site Care Coverage for PC $3000.00 - $3999.99 (22823)
89510
Intel Core i7 4930K 6 Core 3.4GHZ (3.9GHZ Turbo) 12MB Hyperthreading LGA2011 Processor No HSF [BX80633i74930K] [Reg. $649.99]
81958
Western Digital RE 2TB SATA3 7200RPM 64MB Cache 3.5in Internal Hard Drive [WD2000FYYZ] [Reg. $213.57]
Environmental Fee $0.75 Per Item
4

Very nice build list Darren!
I would have selected the Samsung 840 Pro 256GB SSD over the Intel 520, and Areca's ARC-1882i over the Intel SAS controller you list, but those are preferences not essential changes.
Regards,
Jim

Weird Problems with K9A2 System

Can Someone Help Me?
I recently built a new system and have had nothing but problems. See system config in signature (Left off OCZ PRO Xtreme 1000W Power Supply With 4 12 Vrails at a max of 26 Amps each or 82 Amp all together and a 5 Volt rail at 30 Amps Max.) After putting it all (except the seagate 250 IDE drive), system would not even enter post. After strippin memory down to just 2 GB system finally entered post (although my memory were the same models from G.Skill one set was older and one set was new they had different voltages old required 1.9-2.0 while the newer worked at the default 1.8 voltage all timing and specs besides voltage were the same). I entered the bios setup and set my Memory voltage to 1.95 (What I had been runnin the older memory in my old system). Inserted all the memory back in and system booted right up to allow me to install my OS (Vista Home Premium 64-bit).
After the OS installed the system started having all kinds of wierd clitches/problems at one point it locked up and neither reset button nor the power button would work. After unplugging the power I noticed that the M connector for the front case switches was a little loose. I decided to just plug wires directly into board instead of using th M connector. Now my buttons worked again. I then proceded back into the bios and checked my voltages in the hardware monitor of the bios. All voltages looked to be fine with only an ocassional voltage fluctuation in the 5V line from 4.97 to 4.92 Volts and the 12V line was a little high 12.4 Volts. However, after booting back into vista and installing Everest Ultimate Edition it detected the that the 5 Volt line was only at 4.67 Volts. But was not fluctuating at all.
After installing the drivers for my system and proceding to install my anti-virus software the system started freaking out the mouse started lagging and sometimes not responding at all and the keyboard worked intermittently. I decided to remove the M connectors from these as well and that solved that problem. Upon rebooting the system and trying to install the Anti-Virus software again the system started telling me that I had just plugged in something to the audio connector. I had not so I just ignored it and continued to install my anti-virus. (the audio connector alert popped up 4X while I was finishing the installation of the software. I decided to test the audo so I but a DVD in and and watched the whole movie sound worked fine and no more pop ups about the audio connector until I started to install more software. During the next install of software the screen went black and the DVD and Hard Drive LED stopped flashing. It stayed this way for about 10 Min. I decided to hit the reset button and the system would not enter post again.
Once again I started to pull the Memeory It finnally worked after removing the new memory that I had just bought but none of my Maxtor hard drives were recognized and I started smelling smoke. ( Strange only the Maxtor drives went out, all had the interface boards and one chip on each drive fried. After disconnecting these drives and replacing the maxtor 120 GB IDE drive that had fried with a Seagate 250 GB IDE drive and reinstalling everyting onto it since the maxtor was my boot drive the system started up and was running fine except for the occasioal audio connector popup I finished Installing the rest of my software and everything was running good. So I assumed the problems were due to faulty ram. I contacted NewEgg and arranges for an RMA on the memory went shipped the memory back to NewEgg came back and started to move file some file to my NAS200 After about 4 hours the system locked up again (It had been almost 36 hours since I had had anyother problems with the system and it had not been turned off the whole time. All temps were good CPU was at 29C and GPU was at 46C system temp was 31C according to my Everest Ultimate so I didn't think it was a heat related issue)
Upon restarting my computer I got a message that a recent overclocking attempt had failed (I did not try to overclock!!) After going back into Bios and resetting all my settings the computer would not post agian. I tried to clear the CMOS with the jumper just to make sure that there wasn't any coruption inthe CMOS. Still no Luck. Pulled out one stick of the older ram and it booted but very slow. I went to a local parts dealer and bought some extremely over prived memory just so I could get my system back to 2 GB because I had video edditing software that didn't work very good on 1 GB. After installing no post again. So I started testing each stick of memory that I had in DIMM 1 they all worked but anytime I insert one into DIMM 2 it would not boot. Finnally I but 2 sticks into DIMM 3&4 and It started up and ran good. I decided to set my bios Unganged option to enabled and put memory back into DIMM 1 No luck would not post. I removed the memory from DIMM 1 and computer has worked ever fine except for an error coming out from sleep mode. (Never had a computer that didn't have a problem with that) I even updated the BIOS to 1.5 which was suppose to fix the wakeup problem.
So here is what I have I can use Dimm 1 by itself or I can use DIMM 3&4 but not both together. I'm about to buy a Power Supply (single 12V rail at 40 Amps and a 5V rail at 50 Amps) because I think that the 12 V reading as 12.4 and the 5 Volts reading as 4.67 in Everest Ultimate and 4.97 volts in Bios might have something to do with some of my problems. I did not check the Memory that I RMA'd by them selves on DIMM 3&4. I think that they may have been good now.
Can the 5V line registering the way it is 4.97 Bios/4.67 in Windows cause DIMM 2 to not function and create the lockups or can the socket or board be bad and that be what is causing this problem? And Should I RMA the motherboard back or just purchase a different motherboard?
System is pretty Stable as it is now with the voltages as they are. I really wantt to be able to put my new memory that I get back from NewEgg in and have my 4 GB of memory.

OK I have removed the mother board and and checked for grounding issue or any damage from the fried hard drives board looks good did not find any grounding issues in the case. One thing I did not check was that I was using a Startech SATA to IDE converter to connect the the IDE drives that I didn't have the connectors on the board or.
I did some research before buying them and made sure to get one with a plastic box around the pcb due to so many people compaining that their's would short to the hard drive case. Since the loss of the HDD I didn't need the adapter so I quit Using it.
when I did my research on the adapter I found that many people had said that their HDD got hoter when using the adapter I guess my HDD just couldn't handle it. The Drive that I had connected with it was about 6 years old and I had been having intermittent problems with the connector not making a good connection when it was in my old system. (Anytime I would shut the power off for a long period of time and the HDD had a chance to cool down I would have to unplug and reconnect the ide cable from that drive.)
I didn't think that the problem would continue as I was moving it to an new case, motherboard, and cable.
And it just so happened that the drives that fried were all connected the the sata controller in the SB600 chip. My two SATA drives that survied the fire were on the Promise T3 controller. So I guess it is possible that the adapter/HDD configuration I had with the SATA to IDE caused some sort of feedback into the Motherboard's SATA controller and back into the oter HDD on that Controller. I have checked all SATA ports since this happened and they all still work so I'm assuming that it did not damage the chip.
As far as the memory situattion I don't see how the HDD frying could have damaged the Memory unless there is some special connectin between DIMM2 and the SATA controller that doesn't exist with the other DIMM slots. and if it had somehow effected the memory controller to cause this problem I would assume it would have done alot more damage to the cpu than just the memory controller part. So I think I'll try to RMA a new motherboard, if ZippZoomFly will let me this long after getting the board I've had it for about 3.5 weeks waiting on the other parts for the new system) and see what happens.
As for the memory, itself they are not mixed brands or models. I bought one set about a year ago when I purchased my X2 6000 processor and they have worked great as long as I kept the voltage above 1.9 V. The new memory has the same model # as the old but the label on them states the same timings and only a different voltage range. So as long as they voltage was set to within the range of both sets they should work exactly the same. I did notice that the board would only detect 3.25 GB instead of 4 GB, and I was prepared for this. Every Motherboard I have ever owned, no matter who the Manufacturer was, has had this problem. However Vista reported the memory correctly.
I guess if the new motherboard exhibits the same memory problem with not letting me use all slots then i'll buy a 2X2GB set

Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"

Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------

My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be.

8900 printer changed black cart. error code problem with printer system

Changed black cartridge in 8900 series all in one printer error message says trouble with print system call HP. Have removed and reinstalled catridge still same error message. HELP!!!!!

Hi @melvinc
Welcome to the forums
I read about the issue you are facing on your printer, as it's now showing a problem with the ink system. I cannot locate a "8900" printer, could you possibly have the Officejet 8600? If so, please try out the steps from the guide below. If you reach a step where it asks to replace the printhead or printer, call us directly to see what your replacement options are with HP.
A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

140063685933 this is the receipt no Apart of two purchase there all rest I never received was a problem with the system they couldn't be download and naw you are charging me Haw unprofessional is that and more than an hour can't find how to get to custom

140063685933 this is the receipt no
Apart of two purchase there all rest I never received was a problem with the system they couldn't be download and naw you are charging me
Haw unprofessional is that and more than an hour can't find how to get to customer service to correct the mistake
Just so fed up will never ever pitches anything waiting of time and money

Apple is not here. Apple does not answer questions here. There are only volunteer users here.
The charge to your credit card takes place before you download the app.
If you are having problems downloading the apps that you bought, you will need to explain the issue in detail if you wish someone to help you.

Anyone else having problem with RAID and iTunes syncing photos in Vista?

Hello,
For whatever reason iTunes can not load some of the photos from C drive. It can do it from D drive, though VERY slow. Both C and D are NTFS system, but C is a RAID 0 drive (implemented by hardware on motherboard, Intel 82801G controller). I just wander if this is something related to iTunes not working correctly with RAID drivers, or is it something else? I should say that ALL other programs and games working fine on this drive.
Thanks for the replies.

The problem is with Windows Vista using the NTFS file system, check out this post for the official solution. This has worked perfectly for me everytime I've tried it:
http://i.nconspicuo.us/2007/10/28/syncing-photos-to-iphone-with-windows-vista-us ing-itunes-sync-pictures-solution/

Disk Priority Problem with Raid

I have MSI K8N Diamond (Bios version: 1.9)
Here's my problem:
I've got total 4 hard disks. Those are plugged to sata ports
(not to silicon ones, 2 silicon ports are free) also i got no hdd on ide, just a dvd burner
I've planned to create a raid0 array from my WD drives 36x2 with Nvidia raid:
RAID0
1. WD Raptor SATA 36GB
2. WD Raptor SATA 36GB
NONRAID SATA
3. Seagate SATA 300GB
4. Seagate SATA 300GB
Here are the steps that i followed:
1. Enabled nvraid from bios, (just enabled the 2 drives which i'm gonna strip)
2. Set hard disk priority to
1>NVRAID
2>SEAGATE
3>SEAGATE
3. Created raid0 and hooked my both WD drives (f10)
Everything is fine, windows starts to install. Problem just begins after this.
After windows licence agreement (f8) where u choose the disk to install windows, setup tries to install windows on E:
C: Seagate
D: Seagate
E: My NVRAID Stripe => why the hell is it E???
But I set my hdd priority in bios and set the NVRAID first priority as i mentioned earlier.
Why is this priority setting been ignored?
The only workaround i found is removing the Seagate drives physically, then install windows on nvraid as C:
why the hell i must remove my drives everytime i install windows, is there a proper way?
P.S. Same thing happened with silicon raid, so i think this is not a nvraid issue

Halloween,
You may very well be correct, I use an add-in High Point RAID Controller in most of my systems, as you can see in my signature and have one problem from the very start.
When I have the High Point RAID Controller Plugged in, it does not matter which PCI-Express slot I use and the motherboards secondary RAID Controller is Enabled in BIOS the system while not boot. This happens with my K8N Neo4 Platinum and my Diamond Plus motherboards. They have made changes to the BIOS on the Diamond Plus, but the K8N Neo4 Platinum motherboards are still that way and I can not use the Silicon Image RAID Controller on those MB’s yet and its been over four months now. You my have uncover another bug in the BIOS, on these same lines.
You really should get the problem on record with them. Have you used their new nZone trouble reporting system yet. It a lot easier to use than the e-mail help request system. Here is the link to the web site
http://support.msi.com.tw/techSptlogin.php and they have been fixing problem through this system. I have gotten two BIOS fixes so far and they keep list of your request on hand with there current status so you just check every day and answer what questions they have or download and test a fix, which some times and some times do not work. Your respond to the fix or questions and the normally respond within one three days one-way or another. I like it because I can give them a blast on any request I have not heard from them on in a reasonable length of time and a complete transcript of the your messages to and from them is right there for you to refer to if you need it.
Roger
When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings. It is almost impossible to estimate what your problem is without knowing something about it.

Licensing problem with UCCX 7, agent not able to login at all

Hi there,
We have UCCX 7 server and CUCM 7.
Problem is that we the agents are not able to login and they are getting maximum license error although not all licenses are used.
We get the following errors when trying to login:
1. "Maximum number of licenses reached. Please notify your System Administrator".
2. When we click "Ok" for the error above, we get the following "A licensing error has occured. Please try again in five minutes. If the problem persists, please see your log file or System Administrator for details.".
I checked the licensing service and it is working fine.
The log for the licensing service is not indicating anything, it shows only the last time there was a failure in this service (this was 6 months ago after a restart). It was working fine until yesterday.
I tried to disable the "IPCC Extension" under the User Configuration in the CUCM and enable it again, but did not solve the problem and got the same error.
It is worth to mention that when I disabled the "IPCC Extension", before I enabled it again, I tried to login using CAD but I got the same exact error.
Any help will be really appreciate, thanks a lot.

Hi
Open a command prompt on your UCCX server (not client) and go to this directory:
C:\Program Files\Cisco\Desktop\bin
Then run:
showlicenseusage.exe
THis will show you the IP addresses that are currently consuming licenses. You can check these PCs to see if they are still logged in - if they are, that's your problem. If they aren't, then you may have a problem with the LRM service or something.
If it has logins listed that aren't really logged in, you might be able to restart the License and Resource Manager service from Control Center to resolve it temporarily.
Aaron
Please rate helpful posts..

Filter problem with operating system in french

Hello,
There is a problem with the "Operating System - Windows" filter in the french version of ZCC.
If you create a bundle and go into "Requirements" and add a filter with Operating system and you set it to "Version 6.1 - Windows 7 / Windows Server 2008 R2" you get this error
"Vos modifications ne peuvent pas tre appliques pour les raisons suivantes :
ErreurLa version doit tre sous la forme "x" "x.x.x.x". "
"You changes cannot be applied for the following reason : formatting must be x to x.x.x.x"
The format should be "6.1 - Windows 7 /Windows Server 2008 R2 Versions".
The filter does work as intended with the english versions of ZCC. I have no problem with that but some of our admin does.
PS : I am currently unable to open an SR because our licence has not been renewed yet. So i am reporting this here.
Thank you!

Originally Posted by GuillaumeBDEB
Hi poplante, this bug is haunting Novell since version 11.0! Believe me on that. I'm the one who reported it. Here's the workaround.
1.Go to Server machine.
On Windows:
Go to
%ZENWORKS_HOME%\resources\properties\com\novell\ze nworks\core\web\internal\resources\CoreInternal_fr .proeprties
On Linux:
Go to
/opt/novell/zenworks/resources/properties\com/novell/zenworks/core/web/internal/resources/CoreInternal_fr.proeprties
2.change the property value of windows.versions.6.1 from "Versions 6.1 Windows 7 / Windows Server 2008 R2" to "6.1 Versions Windows 7 / Windows Server 2008R2"
3.Then Restart the server. The issue will be gone.
By the way you will see this bug reappear with every new update of ZENworks including new service packs and monthly updates. So keep this workaround at hand just in case.
Hope it helps!
GuillaumeBDEB
In 11.3 the value seems to be:
windows.versions.6.1=Versions 6.1 - Windows 7 / Windows Server 2008 R2
But should probably be set to:
windows.versions.6.1=6.1 - Versions Windows 7 / Windows Server 2008 R2
And the correct Linux path would be: /opt/novell/zenworks/resources/properties/com/novell/zenworks/core/web/internal/resources/CoreInternal_fr.properties.
This bug would probably take them a minute or two to fix, sad to hear that it's been there since 11.
Thomas

Interesting problem with RAID, Windows 2008 server, and Ubuntu

sooooo, i got the system working and linux loved it. just adored it.
however, Windows did not. Windwos 2008 server hard locks from time to time. i fianlly figured out that it had to do with the RAID 0 i was running, that didn't really succeed.
However, when i rebuilt the RAID and everything on it, it refuses to recognize the disk, sayign that windwos cannot determine if this drive has a valid system volume on it.
Ubuntu 9.04 server, however, just took it and made it work great.
I enabled the PCI Bus SATA to be Master in the BIOS, and then Windows Server 2008 said that it could not determine if the drive was bootable. Then i went back and redid the raid, and it did the original error.
I inserted a windows xp disk, destroyed the RAID, and then installed the software on a NEW disk. While it installed fine, it gave me an IRQL_not_less_than_or_equal error. It boots in safe mode, but no where else. I tried installing the NVRAID and MCP55 drivers in safemode and what not, but still, it refused to cooperate. I went back to ubuntu, this time the desktop/workstation versions, and i am doing an alternate install with RAID...much to my disappointment becuase now i will have to use VirtualBox to isntall windows...and if that fails, i'll be really pissed.
My settings are as follows:
SATA Controller 0-5 enabled
NVRAID- enabled
PCI BUS SATA- Option ROM Enabled, Master Enabled, and 0040h latency
MAC LAN- same as above
MAC LAN1- has master disabled, but the other stuff is the same
Serial port A is on AUTO, B is disabled, and floppy is disabled.
Option Rom is PFA relocation.
Also, my AEC A6880 is giving me a ROM expansion error, even though, in both OSes it can be seen....usualy. I just want to fix it
lastly, my LSI PCI-E scsi adapter is not being seen at ALL.
thanks guys.

Quote
Also, my AEC A6880 is giving me a ROM expansion error, even though, in both OSes it can be seen....usualy. I just want to fix it
lastly, my LSI PCI-E scsi adapter is not being seen at ALL.
Turn off onboard raid ctrl 1st. There are conflicting.
Quote
I enabled the PCI Bus SATA to be Master in the BIOS, and then Windows Server 2008 said that it could not determine if the drive was bootable.
Known issue, partition mess:
http://www.google.bg/search?hl=bg&ei=W-l3Sq_4NMbdsgbHnKmmBQ&sa=X&oi=spell&resnum=0&ct=result&cd=1&q=windows+cannot+determine+if+this+drive+has+a+valid+system+volume+on+it.&spell=1
Quote
I inserted a windows xp disk, destroyed the RAID, and then installed the software on a NEW disk. While it installed fine, it gave me an IRQL_not_less_than_or_equal error. It boots in safe mode, but no where else. I tried installing the NVRAID and MCP55 drivers in safemode and what not, but still, it refused to cooperate.
What's the BSOD error? Are you using XP installation disk with included SP3?

Adobe Reader cannot open in Protected Mode due to a problem with your system configuration.

From Adobe website: "Note that this list is not regularly maintained as Protected Mode now runs transparently in the background and it is unlikely that users will experience issues."
This explanation on the Adobe website does not explain what the problem is with the "system configuration". What is the system configuration problem?

Hi Steve,
As mentioned on the troubleshooting page as well normally application like antiviruses, encryption and system maintenance tools causes this kind of problem. These software software intercepts some system calls for the Reader sandbox. Could you please check if you have any of these kind of software installed? Could you please answer following question then I would be in better position to help you?
1. Version of Reader being used
2. OS
3. What happens if you choose launch unprotected? Do you see a failure or Reader launches?
Thanks

Problems Installing RAID System

This is my first attempt at building a RAID system and I'm having a bit of trouble. I'd like to install Arch on one hard drive and then create a RAID-5 array using several 1TB drives I have lying around. The RAID array will only be used for storage--the operating system will be on its own drive. I'm planning on using the RAID controller on my motherboard (Abit IP35 Pro), which I believe provides hardware RAID support (someone please correct me if this is wrong).
From what I've read, it sounds like the best way to get this set up is by installing the operating system first and later adding in the disks and creating the RAID array. The steps I've taken so far are as follows:
1) Remove all disks except for the one I'll be using for the operating system.
2) Go into BIOS and set SATA mode to "RAID"
3) Install Arch
Arch gets installed just fine, but when I try to boot into it, I get a kernel panic with the following error message:
/init: export: line 63: : bad variable name
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: init Not tainted 2.6.36-ARCH #1
Call Trace:
If I go into the BIOS and change the SATA mode back to "AHCI," then Arch boots up just fine.
I've found a lot of documentation on installing software raid/fake raid systems, but I haven't found much on configuring Arch for hardware raid. I've also seen the documentation on dmraid which looks like it might work for me, but I believe that is a software solution and I'd like to take advantage of my hardware controller if possible.
Can anyone else share some insight? Thanks all and Merry Christmas!

i think its fake raid not hardware raid.

Filename problem with RAID

All,
We have a problem with our Xserve RAID with regards to the way files are named. For example we have a file called "081bSelecting_SkyArea#18.tif" which will not copy to our RAID. If i was to copy this to our Xserve it would be fine, but as soon as it goes down the Fire Channel it says we have the incorrect permissions. As soon as i rename the file it works fine.
I under stand from the link below that there has been issues like this in the past with 10.2, but i am unable to find anything with regards to 10.3 server which is what we are using.
http://docs.info.apple.com/article.html?artnum=107144
Many thanks for your time.
Darren Senadhira

Not sure. That bug you're referring to has to do with file sharing (e.g. AFP or SMB), it doesn't say anything about direct-connected fibre channel.
Wish I had a server with RAID attached to tinker with this right now, but alas I don't at the moment. Any chance you can avoid using the #xx at the end of the file names?

I am having problems with my system preferences freezing everytime it is opened

I have had this problem for months. and i want to know if there is something i can do without having to set up an appointment in store. Everytime i open my system preferences app, it freezes and i have to close it before i can even begin to do anything.....

That means either your graphics card does not support 3D or that there is a problem with your graphics drivers. See if your GPU maker has an update.
Error: "Graphics hardware not officially supported for 3D" | Photoshop CC, 13.1

License problems with RAID systems

Similar Messages

Maybe you are looking for