8900 printer changed black cart. error code problem with printer system

Changed black cartridge in 8900 series all in one printer error message says trouble with print system call HP. Have removed and reinstalled catridge still same error message. HELP!!!!!

Hi @melvinc
Welcome to the forums
I read about the issue you are facing on your printer, as it's now showing a problem with the ink system. I cannot locate a "8900" printer, could you possibly have the Officejet 8600? If so, please try out the steps from the guide below. If you reach a step where it asks to replace the printhead or printer, call us directly to see what your replacement options are with HP.
A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Qosmio G20 error message: problem with cooling system has been detected

I am attempting to fix a Qosmio G20 (which is about 3 years old, so no longer in warranty).
The error message is: Warning: A problem with the cooling system has been detected.
I have managed to remove the outer case and observe the machine working, and basically one of the fans is not operating at all. The fan which is nearest to the power connector seems to be working fine (it seems to spin quite a lot, dont know if this is normal), it is the other fan which does not seem to move at all.
When I reattached the case and switched the machine on I noticed after a few minutes that the heatsink vent of the working fan got quite warm, whereas the vent of the non-working fan stayed cool.
I have cleaned the fan of dust and have also altered the BIOS to battery mode from high performance mode, but still the problem exists.
I would be grateful if someone could advise whether the problem is the fan or something else.
If the fan is the problem, where can I buy one from (I live in the UK)?

Hi
In my opinion there could be something wrong with the cooling module and the replacement would be necessary.
Usually this should be done by an authorized service provider (ASP) in your country.
The technicians could replace it with a new part and also could renew the thermal grease which is placed between the cooling module and CPU.
Therefore contact the ASP in your country and ask for the further handling!!!
By the way; you can purchase the cooling module also from the ASP!!!
Good luck

"Problem with printer or ink system"

Hello, so this morning I printed out a paper and I saw I was almost out of black ink. I replaced the cartridge and everything was okay. When I went to print out another paper I received the error message "Problem with printer or ink system... 0x6100004e" I went to HP support and found a whole bunch of solutions. I went through the first few, there is no paper jams, but then I realized my carriage was either not leaving the dock or it would come all the way left just to go right back. When I open the door, its like the printer thinks the carriage is moving because it keeps turning the way it normally would. I tried resetting it, and looking up other solutions but nothing. My warranty was up in May. It had never had this problem when I changed the cartridges before, so I really need all the help I can get.

Hi andre2015,
Please perform the steps from the link below and this will resolve the issue.
http://support.hp.com/us-en/document/c03253201
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.
Regards
Aneesh

Problems with printer and network connectivity

So I've been using an HP B110a photosmart wireless e-all-in-one printer that I got with my macbook pro and at the start, everything worked perfectly in terms of wireless printing, ePrint, and AirPrint. But recently, when I try to print wirelessly, it says the printer is not connected and I also can't find it on the list of nearby printers on the 'add printer' window. I also had problems with printing via ePrint but those have cleared up (I don't know what was wrong but it's fine now). Printing with AirPrint on my iPod touch has stopped working as well because the printer doesn't show up when I search for nearby printers.
Here's what I've checked/tried so far:
All the wireless services are enabled on my printer and my mac
I've reset the printing system on my mac, printer settings to factory defaults
Restarted mac/printer/iPod
Restarted router
Reinstalled HP printing software that came with the printer
All software is up to date
Wireless printing on another windows computer does work
Setting up wireless printing using the HP install disc doesn't work
Trying to add a new printer using the HP software disc that came with the printer is unsuccessful in locating the printer as well.
Printing over USB is problem-free
When I tried restarting the printer/router, I could see the printer for just a few minutes in the 'add printer' list but then it would disappear from the list and the printer would be 'not connected' so I can't print wirelessly.
More info
MacBook Pro (13 inch, early 2011)
Mac OS X Lion (10.7.2)
HP Photosmart e-All-in-One B110a
Router is a Huawei HG556a that I got from Vodafone NZ
Thanks in advance!

http://support.apple.com/kb/DL907

Can't set printer as default. Error code 0x0000709

HP3510 Deskjet printer instaled on Hp laptop running windows 7. Cannot set printer as default. Error code 0x0000709. Removed old computer and software
This question was solved.
View Solution.

tgwright,
Thank you for the additional info. With the print and scan doctor not locating any corrupted software/driver problems its time to look to the operating system itself. Others who have had similar issues with the same error indicate a corrupted registry key causing the problem:
http://goo.gl/t94JG
http://goo.gl/uejgi
Beware these solutions indicate changing registry info (very dangerous if you do not know what you are doing). If you are not comfortable in the registry or have never been there before I would suggest seeking additional support in some fashion (Microsoft/Local IT/PC Repair service/etc).
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Printer will not work: error code 0xc19a0022

Printer will not work: error code 0xc19a0022

Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Problem with printing txt file

I have a problem with printing txt file. My code looks like :
String filename = something.txt";
DocFlavor flavor = DocFlavor.INPUT_STREAM.AUTOSENSE;
PrintService[] services = PrintServiceLookup.lookupPrintServices(
          flavor, null);
PrintRequestAttributeSet pras = new HashPrintRequestAttributeSet();
pras.add(PrintQuality.DRAFT);
pras.add(new Copies(1));
pras.add(MediaSizeName.ISO_A4);
pras.add(Sides.ONE_SIDED);
pras.add(Chromaticity.MONOCHROME);
PrintService service = ServiceUI.printDialog(null, 200, 200,
          services, services[0],
          null,
          pras);
if (service != null)
try
DocPrintJob job = service.createPrintJob();
FileInputStream fis = new FileInputStream(filename);
DocAttributeSet das = new HashDocAttributeSet();
Doc doc = new SimpleDoc(fis, flavor, das);
job.print(doc, pras);
Thread.sleep(10000);
catch(FileNotFoundException e)
catch(PrintException e1)
catch(InterruptedException e2)
It doesn't work :(
What is my purpose: I would like to print .txt file but I would like to get PrintDialog where I can choose PrintQuality, Chromaticity etc. I found also that I should use DocFlavor.INPUT_STREAM.TEXT_PLAIN_HOST but I don't know how.
I will be very gratefull for help :)

I tested it on 3 printers (different models of hp). 2 of them don't give me any error but when it started print priter stoped (just as it dosesn't have a paper), but 1 of them doesn't react (there were no errors), i thought tahat something was wrong with printers but when I change DocFlavor.INPUT_STREAM.AUTOSENSE to DocFlavor.GIF and filename to dog.gif it works so mybe there is another way to print txt file

HP Officejet Pro 8600 "Problem with Printer or Ink System'

A gander at this forum suggests I am one ofa multitude of people perplexed by this issue. There is a notation beside one enquiry which says 'Problem Solved'.... well it isn't for me. My printer (typical!) is one month out of warranty. I had to replace the black cartridge and, when I did, it came up with this error prompt. I then replaced all the other cartridges. HP suggests removing the printhead and following that they say place it 'upside down on a clean sheet of paper'... NO instructions for cleaning it!! When it is replaced in the printer they suggest you 'rock the printhead left and right to make sure that the printhead fully seats in the carriage' and if THIS doesn't fix things 'try reseating the printhead up to 3 times'... This in itself is an admission of an 'issue' with this product. It doesn't sound like a very scientific engineering 'fix' to me!
A new printhead costs almost what we paid for the printer a year ago. I hate consigning anything to landfill that I can avoid... unfortunately it looks like that is where this unit belongs...

Hi @Robin_Perth,
Welcome to the HP Forums!
I am sorry to hear about you getting the problem with printer or ink system error, with your HP Officejet 8600, but I am happy to look into this for you!
I am assuming you have already been through this guide, A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup.
If this guide does not resolve the issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
This guide, Limited Warranty for HP Ink Cartridges and Customer-Replaceable Printheads for HP Inkjet Supplies, will help you to determine if your printhead is still in warranty or not.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Problem with printing a PDF

Hi All,
I'm developing a web application written in J2EE that uses Java Reporting Component (JRC) to display crystal reports from some filters recovered from a jsp and passed to a report .rpt previously designed and invoked just at runtime.
I have a problem with printing a PDF:
I want, after entering the filters in a jsp, to print a report in PDF format (WORD) without opening it
with Adobe Reader (Microsoft Word). The class of API JRC used for export is ReportExportControl.
Can anyone help me?
I wish a great day to You all.

Hi Ted Ueda,
sorry for the delay of my answer.
I understand very well the problems related to security.
With the following code that I used to produce a report (PDF) at runtime,
is the PDF created on the server and then sent to the client, or is it directly created on the client as PDF
from RTF previously realized?
ReportExportControl exportControl = new ReportExportControl();
String report = report path;
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(report, OpenReportOptions._openAsReadOnly);
Object reportSource = null;
reportSource = reportClientDoc.getReportSource();
//The method setConnectionProperties() stores all the connection parameters in the collection
//ConnectioInfos
ConnectionInfos connInfos = setConnectionProperties(request, reportClientDoc);
exportControl.setEnableLogonPrompt(false);
exportControl.setEnableParameterPrompt(false);
exportControl.setReportSource(reportSource);
exportControl.setDatabaseLogonInfos(connInfos);
//Single method to pass parameters to Crystal Reports. Using classes ParameterFieldController and
//ParameterFieldDiscreteValue
setReportParametersValue(reportClientDoc, reportParameters, subReportParameters);
ExportOptions exportOptions = new ExportOptions();
//Set the export format (PDF)
exportOptions.setExportFormatType(ReportExportFormat.PDF);
PDFExportFormatOptions PDFExpOpts = new PDFExportFormatOptions();
exportOptions.setFormatOptions(PDFExpOpts);
exportControl.setExportOptions(exportOptions);
exportControl.setExportAsAttachment(true);
try {
      exportControl.getHtmlContent(request, response, getServletConfig().getServletContext());
} catch (ReportSDKExceptionBase e) {
throw new ApplicationException("error code", ": error message"); }
As, however, I predicted in my previous message about the direct printing on the client,
I read about ActiveX, but I don't know how to use them.
I read this information in the 'Crystal Reports for Eclipse Developer Guide' about "printMode" attribute:
"In ActiveX print mode, an ActiveX control is downloaded to the client machine and the report is send directly to the printer...."
The ActiveX alternative is a java applet that runs on the client and takes the pdf from the server and prints directly onto the clients through the commands that I used in the DOS command line:
1)     AcroRd32.exe /p /h FILENAME
where
/p = print
/h = hide window
to print the report and
2)     tkill AcroRd32
to close Adobe Reader, because it doesn't end automatically after printing and the command /h is used just to minimize the process.
I hope you can give me advice because I need to print directly on the client. Thank you

ERROR CODE 1962 - NO OPERATING SYSTEM FOUND

My B540 continues to experience intermittent problems with Error Code 1962-No Operating System Found. Sometimes the computer will run correctly for 3 or 4 days, other times for just an hour, but in the end it repeatedly locks up and will not reboot. If I check the Bios Setup immediately after this happens, it says that there is no HDD. However, if I wait for an hour or two with the computer off, it will boot.
1. The logical explanation is that the HDD is faulty, but that is not so in this case. In addition to the HDD that came with the computer, I have tried two other HDDs, both brand new, never used, and both with fresh Win 7 installs. Both of those ended up with the same Error Code 1962. There is no way that all three HDDs could be defective.
2. I removed and reseated the memory.
3. I ran extensive diagnostic tests on the memory; it tests OK.
4. Someone suggested plugging the HDD SATA cable into a different SATA connection, but the B540 only has two connections (one for the HDD, one for the optical drive). I swapped those two, but still got the error code.
I have to believe that the problem is with the motherboard. I have noticed on the forum that other people are experiencing the same 1962 error code; has anyone found a working solution?
Thanks!

Ah, bummer. Thought maybe I was onto something...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

HP 4622 All in One Printer: Problem with Printer or Ink System

Problem with Printer or Ink System Error OXC19a0027.

charleshia wrote:
Thanks so much for replying to my post. I tried the fist suggestions and they did not work. So, I attempted to move on Dow to the cleaning of my printer. I am the the first to admit that I'm not the genius when it come to electronics buys, my printer do not seem to have what is described in the photos. I'd like to upload a photo of my ink cartage but do not know how.
Charleshia, you can upload a photo here to reply. Click Reply, then on the window you'll see the image below..
click the one which has the red box, it's where you insert the photo
Going back on your issue.. the basic step would be.. take out the inks then close the door... what error message you got? If it's saying "Missing Ink Cartridge" just hit OK. Unplug the power cable at back of the printer, plug it back in.. Clean the copper contacts on the ink cartridges using a lint free cloth then reinstall them. Let me know if it resolved it or not.. I can only give basic troubleshooting here

I am not able to open iCloud from pc, error is "problem with the server". what should I do?

I am not able to open iCloud from pc, error is "problem with the server". what should I do?

Go to Settings>General>Restrictions>Accounts (near the bottom) and set this to Allow Changes. You will then be able to access Settings>iCloud again.

I had a problem with print preview of billing document.

HI all,
I had a problem with print preview of billing document which contains two output types ZR1 ZR2..
For the footer text of billing document I maintained the font size as 7,5 pts, But when i go for print preview from output type ZR1 the font size of footer text is very small and looks good for output type ZR2.
If i change the print options-->logical destination of output type ZR1 same as Output type ZR2, the footer text looks good.
I think there is some issue with logical destination in print options for the output type ZR1, how can i resolve it.

hi,
for both the output types , r u using same sapscript or smartform?
if yes then, u can control it in output options of smartform and also in sapscript , you can control through if condition.
and if differect sapscript or smartform then you should not get such problem.
you can check the sapscript or smartfrom in TNAPR table.

Problem with printing from Acrobat Reader XI

SInce I installed Acrobat Reader XI I have got problems with printing out pages. The text starts a bit down (2 cm) on the paper, resulting that the last part of the text on the page will be missing. And the missing part does not follow on page 2, it just don´t comes out!
It doesn´t matter what settings i click in on the print setting page in Acrobat Reader, it always gets the same result.
Does anyone know what can be the problem?

No files appeared in C:\Users\Pavilion\AppData\Roaming\Adobe\Adobe PDF\Settings but they did appear in Distiller.
I tried to copied them from C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Settings, but found they were already there. I copied them by adding -COPY before .joboptions in the name. Now they appeared in Printing Preferences with the -COPY added.
I tested a print from Word (using File / Print), but was not prompted for the filename or location. I checked my entire system and couldn't find the PDF file anywhere. I tried changing the Port to Desktop\*.pdf using Printer Properties, but that didn't work either.
I was able to successfully use the Acrobat menu item in Word & Excel to create a PDF but it automatically created the file on the Desktop without an option to change the filename.
After several days and hours, I gave up and installed Acrobat X on the W7 computer. I can still use Acrobat XI on the W8 computer. So be it!
Thanks anyway for your attempts to help.

Problem with printing through SAP

Hi All,
We have problem with printing, only one person through SAP can only print the documents successfully and the remaining are getting incomplete print output. This is happening only for transactions GD23 and FB03 (FI related transactions). We have tried with removing Saplpd folder and installing Sprint as suggested by SAP from note 894444. Still problem persists. Please suggest me in this regards.
Veerendra Kumar.

Hi Ardhian,
We are using Front end printing and already installed SAP GUI new version i.e. 7.10.
Only one user is able to print the document correctly from SAP, and other are getting incorrect print and getting error message "System cannot print the last 80 columns of the report" on one system.
SAP version we are using is 4.7EE.
Let me know if any more information needed for analysing the issue.
VeerendraKumar.
Edited by: Veerendra Kumar Mutyala on Feb 20, 2009 5:35 AM
Edited by: Veerendra Kumar Mutyala on Feb 20, 2009 5:37 AM

8900 printer changed black cart. error code problem with printer system

Similar Messages

Maybe you are looking for