Licensing Server

Hi,
When I trying to connect SBO Server through Client it is always aking for Licensing Server, Even I selected SBO Server still it is asking for the same.
But I can work on SBO Server, since Licensing Manager service is running on SBO Server.
Kindly guide me in fixing the thread.
Than Q & With Regards,
Baba

Hello,
Sometimes, it seems could be happened when you are working in SBO server and changing the system date backward, you can do that but the risk is when you start SBO, the system will ask you for typing the licensing server IP address.
That's primary cause but if this is happened without never changing the computer system date  and then there is a problem related to license server, all you have to do is to restart the server or repair it directly in the add remove program under control panel
Rgds,

Similar Messages

  • Server 2012 - Problem with multiple instances of RDS looking to the same license server. Server Pools requiring the wrong servers.

    Hi All,
    I have two domains, prod.local and test.local.  On prod.local, I have a license server living on the connection broker.  I have created a two way trust between the domains so that the RDS instance on test.local can use the license server on prod.local.
     When I first setup the RDS instance on test.local and point it to use the license server on prod.local everything appears to work, all servers recognize the license server.  
    However when I log off and back on, and click the RDS dashboard in test.local, the Remote Desktop Services overview states I need to add every server from prod.local to the server pool.  This is bothersome because the Remote Desktop Services on test.local
    is still functioning, but I am no longer able to manage it.  When I add the servers from prod.local to the server pool I am displayed the setup for prod.local instead of test.local
    Is there a way around this?  Can I use the same RDS license server key multiple times?
    tldr: Using a different domain's license server causes my RDS instance in Server Manager to display the wrong RDS farm.

    Hi Nathan,
    Thank you for posting in Windows Server forum.
    Please check the required ports must be opened on firewall.
    - To issue RDS Per User CALs to users in other domains, there must be a two-way trust between the domains, and the license server must be a member of the Terminal Server License Servers group in those domains.
    - To restrict the issuance of RDS CALs, you can add RDS Host Servers into Terminal Server Computers group on RDS Licensing servers.
    - Configure RDS licensing server on all RDS Host Servers in each domain/forest. You can do it through RDS host configuration snap-in or through a group policy. 
    - Add administrators group of each domain/forest in the local administrators of RDS licensing server. This way, you’ll not get a prompt to enter your credentials when you’ll open RDS host configuration snap-ins in trusted domains/forests.
    More information:
    Best practices for setting up Remote Desktop Licensing (Terminal Server Licensing) across Active Directory Domains/Forests or Workgroup
    http://support.microsoft.com/kb/2473823
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Remote Desktop Licensing Server for multiple deployments

    Hi all. I'm towards a project of implementing 4 deployments of RDS in branch offices and 1 in head office. Those tend to be VMs on Server 2012 R2. 
    I've began collecting info from technet and even found that great post: 
    http://blogs.technet.com/b/yungchou/archive/2010/01/04/remote-desktop-services-rds-architecture-explained.aspx
     but I still can't figure out if I'm to use separate licensing server for all deployments or there is a possibility to use a single one for 5?

    If all machines are in the same domain a single license server will be fine. you will just need to add the licence server to your individual deployments via server manager. We have a single license server for 2003TS, 2012RDS 2012citrix VDI and 2008 Citrix
    XenApp

  • Server 2012 R2 RDS- Only want the Session Host, Connection Broker and Licensing Server!

    Hi all,
    Wondering if anyone has experience with implementing Remote Desktop Services (RDS) on Windows Server 2012 R2.
    I am doing an RDS design for a platform where we only need an RDS Session Host, Licensing Server and Connection Broker. We do not need web access as these servers will simply be jump boxes internally!
    However, implementing this correctly in our test environment has proved to be tricky. The options are:
    Use the Server Manager and do a traditional install via Roles and Features ( specifically add the Session Host, Licensing Server and Connection Broker). The installation process seems to go through ok in this scenario but when I head over to the Remote
    Desktop Services section of the Server Manager I simply get the message 'An RDS Deployment does not exist in the server pool. To create a deployment head to Roles and Features'.
    Use the specific ‘Remote Desktop Services installation’ option on the Server Manager and do a Session Based Desktop deployment and Quick Start. This installation process seems to go through correctly and the Remote Desktop Section seems to be working
    correctly via the Server Manager. However this process is ‘hard locked’ i.e. it installs the session host, web access and connection broker. I can then remove the web access component later from Roles/ Features.
    Is there a best practice (if any) for installation? i.e. Will there be any issues down the line if I remove RDS Web Access from my server while following method 2?
    There is a complete lack of documentation from Microsoft here so not sure what to do! Just need a basic RDS session based deployment.

    Hi,
    As I know from server 2012\R2 the best deployment skill is to perform via “Remote Desktop Services” installation mode with Standard deployment and don’t let single role to install. Because when we install through RDS mode, there are specific extra tools and
    services activated along with that deployment which you can’t find with single role installation. And that is for sure, when we install RDS role as of this, by default we will get install RDCB, RDSH and RDWA role installed.
    Sorry don’t have any option to try to remove that role as that role basically needed for RemoteApp and Desktop purpose. But if you want then you can try it with help of “Remove-RDServer”Powershell command.
    https://technet.microsoft.com/en-us/library/jj215506.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Why am I getting the error: error getting license License Server communication problem W_ADEPT_CORE_EXPIRED when I try to download a book from the public library using Adobe Digital Editions. It has been working for a few months, but now I suddenly get th

    I have checked and the Adobe Digital Editions is authorized. The library book doesn't expire for another 14 days.  These have been the only two suggestions that I have found in other forums.  Does anyone have any other suggestions?

    I am having this exact issue. I just downloaded a book and went to open it and got this exact problem.
    I purchased he book through indigo/kobo edition and paid for it and immediately went to open it and am getting the same error
    Error getting License. License Server Communication Problem only mine says  Bad Device key after.
    Not sure why someone has not answered this question yet...i am using windows 7 and this is how i always do it. Never had this problem before when purchasing a book.
    i hope someone answers this soon.

  • When I open a book in Adobe Digital Editions, I get the following error: Error getting License. License Server Communication Problem: E_ADEPT_DOCUMENT_TYPE_UNKNOWN:

    Hi, I bought an e-book in PDF format that uses Adobe DRM.  I've created an account on adobe.com and tried downloading the book in Adobe Digital Editions on the Mac (as well as the bookstore's e-reader--logged into my Adobe account--on an Android device). 
    It tries to download the book but get's the following error:
    Error getting License. License Server Communication Problem:
    E_ADEPT_DOCUMENT_TYPE_UNKNOWN:
    Has anyone come across this?  Any guidance would be most appreciated!
    Thanks!
    Tony

    Please refer to the KB article, Public Knowledge Base

  • License server refimpl install

    Hello everybody!
    We got trial Flash access license server. We decided to enroll reference implementations first to test FA potentialities. For this purposes we have debian linux 2.6.26-2-xen-amd64 x86_64 with FA_2 distrib copied to it.
    jdk1.6_20, MySQL 5.1, JDBC Driver, Tomcat 6.0.18 are installed as required in protectContent.pdf document.
    Here is the sequence of steps made to deploy FA to this machine:
    1.       In “/etc/profile” I’ve added JAVA_HOME=”/usr/” and CLASSPATH=”/root/Tomcat/6.0.18/libs:/root/javalibs/” variables
    2.       I’ve copied java libs (.jar-s) needed for flashaccess.war build to /root/javalibs/ from FA distrib.
    3.       Сonfigured build-refimpl.xml with corresponding directories in it.
    4.       Run “ant –f build-refimpl.xml all” and it wrote it was successful.
    Here is question number 1:
    How can I check the application’s build was successful (except the ant’s build message “build successfull”)?
    5.       I’ve copied edcws.war flashaccess-packager.war flashaccess.war from wars directory to /root/Tomcat/6.0.18/webapps.
    6.       Top command showed me some java process activity after that (I think that was deployment process activity).
    7.       Then I went to /root/Tomcat/6.0.18/webapps/flashaccess and saw this directory structure:
    Here is question number 2:
    What files should appear in application’s directory after deploying it’s flashaccess.war to the Tomcat container?
    8.       I opened browser and put http://your server:server port/flashaccess/license/v1.
    in the address link. Tomcat shows 404 error page (so the license server is not running correctly).
    9.       In  protectContent.pdf document it is said that if the license server reference implementation installation is correct then $CATALINA_HOME/AdobeFlashAccess.log file should be created. So I went to $CATALINA_HOME and opened it. Here is its output (the record bellow is repeated several times and there is nothing more in that file):
    2010-10-07 18:50:16,655 INFO  [com.adobe.flashaccess.refimpl.packager.RefImplPackagerServer] Packager thread started. Thread: Thread[WatchedFolderPackagerThread,1,main]
    What records should I see if the server is working properly?
    What did I miss in the configuration process to make the License server run properly?
    And also there are two questions bellow:
    1.       How can I check trial keys expiration date?
    2.       Will default encryption policies (reference implementation) work correctly with trial keys?

    [Eric] Before I start with your questions, I believe there may be some confusion between the 2 servers we offer with Flash Access.  Below is a synopsis.
    >> License Server for Protected Streaming is a bare-bones license server that does not support authentication out the box.  This is what the Flash Access Quickstart Guide uses to set you up.  The reasoning for this is that setting up this server requires minimal installation & is rather quick.  However, as this server is bare-bones, it will only issue 1 type of license per tenant folder you have.  Any policy you use to package content will be ignored, and instead, the tenant config will determine what licenses users receive.
    >> Reference Implementation License Server is a full-fledged license server that requires a database (MySQL installer is included) which supports authentication out-the-box, and also issues licenses according to what is specified in the policy packaged with your content.
    I take it that if you are not using the hardware module to store keys, then there is no need to have the pkcs11.cfg file in the licenseserver folder?
    I get an error in the log file for when this file is not specified.
    [Eric] Correct - if you are not using an HSM, you can safely ignore the pkcs7.cfg error in the logfiles.
    1. I am not getting the logging that you are, so to see what I have done wrong is difficult. Which is the log4j.xml that the flashaccessserver uses and where is it located?
    [Eric] It seems like you are using the License Server for Protected Streaming (which is what the Quickstart guide shows you how to install).  The log4j.xml file is included in the flashaccessserver.war file itself.  By default, the logs are stored at {LicenseServer.ConfigRoot}, which is defaulted to "tomcat/licenseserver/".
    2. Following the steps that uwe mentioned, my player drm log reports that the user authentication is failing (with testuser3). What player are you using to test this? Are you running http://localhost:8080/player/SampleVideoPlayer_FP.html# ?
    [Eric] The Protected Streaming License Server (which is what the Flash Access Quickstart guide references) does not support Authentication out-the-box.  You will have to install the Reference Implementation (see the Protecting Content document section #9), or refer to this thread to determine how you can create an authorizer for the Protected Streaming License Server: http://forums.adobe.com/thread/726547?tstart=0
    My call to http://localhost:8080/flashaccessserver/sampletenant/flashaccess/licen se/v1 responds 'License Server is setup correctly'
    I've put the content such that calling http://localhost:8080/Indesign.f4v will download it.
    When I use the sample video player, the auth fails with the message:
    Authentication error event .... event type authenticationError Error code = 3305 [ServerConnectionFailed] Sub Error Code = 404
    [Eric] If you are using the License Server for Protected Streaming (like you seem to be doing above), you should package your content with the License Server URL of: http://localhost:8080/flashaccessserver/sampletenant/
    [Eric] If you are using the Reference Implementation License Server, you should package your content with the following License Server URL: http://localhost:8080/
    So it seems like I am getting a 404, but for what resource I wonder?
    [updated]
    From access log:
    127.0.0.1 - - [18/Oct/2010:13:27:52 +0100] "GET /flashaccessserver/sampletenant/flashaccess/license/v1 HTTP/1.1" 200 33
    127.0.0.1 - - [18/Oct/2010:13:28:22 +0100] "POST /flashaccessserver/flashaccess/authn/v1 HTTP/1.1" 404 -
    cheers,
    /Eric.

  • License server in data transfer workbench

    Dear All Experts/Gurus,
    I have a problem about log on to data transfer workbench (DTW). I don't understand why I must put numbers in license server field before log on to Data transfer workbench ? In the license server field of license administration form, I've seen the license server is words for example jimmymc, then beside it 40000.
    I log on DTW, I fill jimmymc in the license server field but I've got error message:
    "connection to jimmymc has failed. Error code 100000001. Connection with license server failed"
    I don't understand why it succeeds if I fill numbers for example 130.1.2.5:40000, it works successful. What actually the function of license server field ? why could it be different with license server in the license administration form ?
    I apreciate your answer. TIA
    Rgds,

    Jimmy,
    The net-net is that ... the way you log into the DTW as of the 2005A version is different becasue the overall licensing mechanism used by SAP Business One for 2005 changed from what was used in version 2004.  The licensing mechanism now uses CORBA.  This allows connection without having to have an IP Address, but you can still use one as you have seen.  When you install the License Server for Business One, the default connection "port" used and is defaulted to in the License Server is 30000 ... although you can change this to any port not being used.  Again ... the net-net is that is how it works and that is what is now required for connection or use the IP.
    HTH,
    Eddy

  • Is it possible to administer the license server from a remote computer?

    NI VLM and the license server service are running on a license server machine. Company policy prevents me from having admin access to the machine (which seems necessary in order to run NI VLM). Is it possible to administer the license server service from a remote machine? i.e., can I install NI VLM on a machine that is not the license server, but connect to and manage the license server service over the network? I can access the license server via RDP, but without admin access, I can't get very far.
    Is there any other way to manage the VLM without admin access to the machine it is running on?
    Thanks,
    Chris

    Hey Chris,
    I haven't heard of a case where someone was able to administer licenses via VLM without having administrator access. Is there any possibility of getting administrator access on the license server machine, even if it's through some sort of temporary account?

  • Windows Server 2012 RDS CALS on Windows Server 2008 R2 Licensing Server

    Hi,
    at the moment we are installing the first couple of Windows Server 2012 in our infrastructure.
    Some of them have installed RDS.
    Now we are wondering whether it is possible to use our existing Windows Server 2008 R2 licensing server for serving the licenses we have (yes we to have new Windows Server 2012 RDS CALS) or whether we have to install a new host based on Windows Server 2012.
    We tried to add the new license to the 2008 R2 licensing server, but it is not possible. The licensing manager's error message: "The license code contains invalid characters or not enough characters."
    Is there any other way?
    Thanks and regards
    Matthias

    Hi matt_will_fix_it,
    How about Windows 2012 R2 ?
    Will a Windows 2012 RD Licensing server provide licences to a Windows 2012 R2 server?
    I have not tested it, but it should work.  Server 2012 R2 requires the same RDS CAL version as Server 2012.  If you try it and have an issue please reply back.
    -TP

  • I keep getting the following message after I download a book and try to open the book from my downloads (in finder) Error getting License. License Server Communication Problem: E_ACT_NOT_READY. It gives me no other information and no options other than to

    I don't really know what to do. I download a book from my library and it then goes to my download folder in finder (I have a macbook pro). When I double click on the downloaded book to open, digital editions comes up and then I get the following message
    Error getting License. License Server Communication Problem:
    E_ACT_NOT_READY
    The only option I have at that point is to close the window. My computer is registered/authorized and I have tried everything I can think of but can't get the books to download into adobe digital editions.
    Help please

    I am having this exact issue. I just downloaded a book and went to open it and got this exact problem.
    I purchased he book through indigo/kobo edition and paid for it and immediately went to open it and am getting the same error
    Error getting License. License Server Communication Problem only mine says  Bad Device key after.
    Not sure why someone has not answered this question yet...i am using windows 7 and this is how i always do it. Never had this problem before when purchasing a book.
    i hope someone answers this soon.

  • I upgraded to a new apple mac book pro and now when I try to download to adobe digital edition I receive this error:Error getting License. License Server Communication Problem: E_ACT_NOT_READY

    I upgraded to a new apple mac book pro and now when I try to download to adobe digital edition I receive this error:Error getting License. License Server Communication Problem: E_ACT_NOT_READY

    What does that have to do with Digital Publishing Suite?
    We’d love to help but if does have something to do with it, please give us
    some details.

  • "Error getting license. License server communication problem. E_IO_CANNOT OPEN".

    When I download ebooks from libary, I get "Error getting license. License server communication problem. E_IO_CANNOT OPEN". What can I do?

    You may be experiencing an authorization error, see KB: http://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html
    Or you may be experiencing a network related problem like the one I'm having:
    http://forums.adobe.com/thread/1420854?tstart=0

  • Ime I try to open a document I get :  Error getting License. License Server Communication Problem:  E_STREAM_ERROR:

    Every time I Try to open a document I get:  Error getting License. License Server Communication Problem:  E_STREAM_ERROR:

    do you have a compatible os for the ade version you're trying to use?
    ie, what os/what ade version?

  • Why don't my DRM policies seem to work? Using "License Server for Protected Streaming"

    Do you find yourself setting rights/restrictions in a DRM policy (like disallow playback on Linux), only to see that the right/restriction isn't being enforced when you play your content?  There may be several reason causing this to happen:
    1. If you are using the "Adobe Access Server for Protected Streaming" that came on your ESD/DVD, this streaming-only server is configured to specifically ignore any policy that was used to package content.  Instead, the server itself overrides the entire packaged policy and instead, reads rights from its tenant configuration XML file (flashaccess-tenant.xml) to generate licenses issued back to the requesting device.
    2. Is your license server configured to use a PolicyUpdateList?  This is a list that can be used to override any old policy (according to its Policy ID) and to use a newly defined policy instead.  This is useful if content was pacakged with a policy and then afterwards, the business rules have changed for the particular policy, warranting an across-the-board change to all content packaged with that particular policy.  Using a PolicyUpdateList is essentially a way to version your older (already used) policies.
    3. is your license server overriding the policy manually in its code?  If you're using the Reference Implementation license server (or building your own server from the SDK), your server has direct access to the policy.  The server can add/remove/change any right in the policy before using it to generate a license for the requesting device.  If you're using the Reference Implementation, by default, it will simply generate a license directly from the policy without any manipulation to it.
    4. Are you sure you re-packaged your content using the new policy where you made your changes?  On your license server, since you have access to the policy (it's sent up to the license server as part of the license request), the license server can log the policy ID of the policy.  Check your logs to verify the new policy is actually being used.
    5. Are you sure you're playing back the newly-packaged content?  Caches may be stale.
    cheers,
    /Eric.

    Not possible with a POP account.
    The email account sync process with iTunes syncs (or transfers) email account setup information for select accounts only from your computer to the iPhone. This does not not involve messages.
    The reason the account's Inbox mailbox seemed to sync is because received messages with a POP account are the only server stored messages and if not removed from the server when downloaded by one email client can be downloaded from the server by another - in this case the iPhone.
    If you want Sent messages kept synchronized between your computer's email client and the iPhone's email client, you MUST use an IMAP account for this purpose.

  • Lms 3.2 and window server 2008 standard: License Server/Daemon Manager is down

    LMS 3.2 and window server  2008 standard, get error when we try
    Khi truy nhập vào menu chức năng:
    License Server/Daemon Manager is down. Please check license.log for more information.
    access licensing:
    Error communicating with License Server. License Server may be down. Please start the License Server, then refresh the page.
    Lincense.txt is file log of LMS
    Must I have to active window server 2008 first ?
    thank you very much ?

    Hi ,
    --Add the Casuser to the Administrator Group
    and then reset the casuser password:
    1. Go to CSCOpx\setup\support> and run the following command:
    resetCasuser.exe
    2.     Restart the daemon manager:
    Net stop crmdmgtd
    Net start crmdmgtd
    Let me know how it works
    If above did not help then send me the syslog.log and screen shot of the EventViewer with the latest Application Error that you see there.
    --also screen shot of the below directory :
    NMSROOT\etc\license
    Thanks
    Afroj

Maybe you are looking for