OWB 9.0.4 ability to restart failed ETL jobs ?

Hi all,
Does OWB 9.0.4 provide the ability to restart failed ETL jobs ?
For example in a Module of 20 mappings, 15 mappings have completed with success. Mapping 16 fails and hence OWF exists with failure. In the event the problem is rectified can OWB restart at mapping 16 rather than from mapping 1.
Regards
Nick

Nick,
At the moment there is no way to explicitly start from mapping 16, unless there are specific conditions that caused your mapping to fail.
For example, if you have enabled resumable statements on the database level and your mapping would run into a situation where these can be leveraged (e.g. you run out of tablespace) then you could resume the execution and the process flow would continue.
Also, if there is an external situation that causes your execution to fail (e.g. mapping does not exist) then you can use Workflow's restart capabilities to resume.
If however there is a data reason why a mapping fails, then you will have to manually intervene and resolve the process. If your mappings have been defined in such a way that only changed data is being captured (may be a good idea after all...) then you could just rerun the entire process flow. In other cases... I am afraid you'll have to go in manually to execute the individual mappings and fix the process flow as such.
Mark.

Similar Messages

BO XI 3.1 Re-schedule failed scheduling job

Hi...
I am not sure if I am just unable to find matching resources, but maybe someone can just point in the right direction.
In a custom application, we have a scheduling overview, where we imitate some of the CMC behaviour.
Now I need to add a feature to restart failed scheduling jobs.
Some lines of pseudocode or a hint where I can find samples, documentation or anything will help.
Any help is appreciated.
Regards
Jan

Hi Ryan,
Thanks for your reply. I have followed the same sequence but somehow the code is not functioning as expected.
<%@ page import = "com.crystaldecisions.sdk.occa.infostore.*" %>
<%@ page import = "com.crystaldecisions.sdk.framework.CrystalEnterprise" %>
<%@ page import = "com.crystaldecisions.sdk.exception.SDKException" %>
<%@ page import = "com.crystaldecisions.sdk.framework.IEnterpriseSession" %>
<%
 // logon information
 String boCmsName = "***" ;
 String boUsername = "***" ;
 String boPassword = "***" ;
 String boAuthType = "secEnterprise" ;
 // report
 String reportName = "SDK_TEST" ;
 // logon
 IEnterpriseSession ceSession = CrystalEnterprise.getSessionMgr().logon( boUsername, boPassword, boCmsName, boAuthType ) ;
 IInfoStore oInfoStore = (IInfoStore)ceSession.getService( "", "InfoStore" ) ;
 IInfoObjects oInfoObjects = oInfoStore.query("select top 1 * from ci_infoobjects where SI_NAME='" + reportName + "' " );
 IInfoObject oI = (IInfoObject) oInfoObjects.get(0);
 IInfoObject oSched = (IInfoObject) oInfoObjects.get(0);
 oSched.getSchedulingInfo().setRightNow(true);
 oSched.getSchedulingInfo().setType(CeScheduleType.ONCE); oInfoStore.schedule(oInfoObjects);
 %>
What is happening here is, report is getting scheduled but it is not sending mail/attachment unlike the original schedule instance.
Below are the details of the rescheduled instance
Quote:
Title: SDK_TEST
Document Type: Web Intelligence Report
Status Success
Destination: Default
Owner: ****
Creation Time: 5/15/2014 1:53 AM
Start Time: 5/15/2014 1:53 AM
End Time: 5/15/2014 1:53 AM
Duration: 3 sec
Server Used: mdwnew.AdaptiveJobServer
PID: 27131966
Parent Object Path: **********
Remote Instance in Federated Cluster: No
Expiry: 5/15/2024 1:53 AM
Formats: Web Intelligence
Now my doubt is can we reschedule the report directly or we need to get all the scheduling info like from/to/events etc and then apply them for the new schedule? I think it will be a tedious job as it could be SMTP or FTP or inbox or anything.

MacPro3,1 Restart Fails along with freezes up during activity

My MacPro3,1 restart fails as well as freezes up during some processes like Finder.app. When it freezes up during with Finder.app and I do a Force Quit Relaunch it never relaunches it just quits and never returns. Clean install.

You have posted three different symptoms in three different posts. In isolation, they do not lead anywhere in particular.
But taken together, I think it is worth investigating graphics card failure.
Several non-graphics-dependent features are discernible:
• The Caps lock light on the keyboard is under software control. The software is not completely dead if the caps lock light is changeable.
• Control-eject produces this familiar dialog box:
Any key other than R for Restart, S for Sleep, Esc for Cancel, or Return (to take the default and Shutdown) will produce a SysBeep sound IF the software is still running.
> So, if the software is still running when your described problems occur, you can conclude that your Graphics card is the source of your not seeing it continue to work.

DB 7.8 Restart fails with SQL error -9407, unexpected error 3

Hello,
MaxDB Instance (7.8.01.18) fails to restart with the error
"SQL error -9407 System error: unexpected error 3
Internal errorcode 6433 "system_error" 20017, Restart Filesystem failed with
'System error unexpected error'
9, File directory restart failed; error '3'
31, Error linking entry to parent; file no '000000004066',
parent file no '000000000000000000033D',
file type 'IndexFile', error '11'
We had the problem "[-8]: Execution failed, parse again" with one table,
then we tried to restart the database. Now it doesn't come up any more.
Is there another possibility instead of a recovery?
Greetings
Ulrich

Your problem description sounds very similar to the following error:
PTS1237652:
"Appearance:
Restart fails with file directory corruption:
31,Error linking entry to parent; file no 'xxx', parent file no 'yyy', file type 'IndexFile', error '11'
Preconditions and circumstances:
During a recreate index operation the index was dropped and recreated manually.
Workaround:
None. The system must be recovered to the time just before the index was recreated."
Please note that this is one of those issues that has only been fixed with 7.8.02. 7.8.02 is currently in customer testing, if anyone wants to join, just open a CSS message and test this version before we make it generally available for download.
Best regards,
Thorsten

Like to know how to restart failes patch

Dear all
If any patch fail to apply patch due some reason's how to restart... From some web site i seen that there is option called adctrl is use for restart failed worker.. Now we assume like if the patch completed around 90 % and it taken around 2 hours for that.. Now the remaining 10% only wanna to execute which is taken only ten min to complete now what i wanna to do complete with out start the process from beginning...
Mean while i like to know the difference between adctrl and autopatch restart (i.e the purpose of $APPL_TOP/admin/<SID>/restart ).....
Regards
Gopinath

Hi,
If any patch fail to apply patch due some reason's how to restart... From some web site i seen that there is option called adctrl is use for restart failed worker.. Now we assume like if the patch completed around 90 % and it taken around 2 hours for that.. Now the remaining 10% only wanna to execute which is taken only ten min to complete now what i wanna to do complete with out start the process from beginning...Please see the link
http://beginapps.blogspot.com/2008/04/how-to-apply-11i-patch-when-adpatch-is.html
The above link talks about 11i. It is the same for R12 except the location of restart files in R12 is in $APPL_TOP/admin/<SID>
Mean while i like to know the difference between adctrl and autopatch restart (i.e the purpose of $APPL_TOP/admin/<SID>/restart ).....Please read the documentation
http://docs.oracle.com/cd/B34956_01/current/acrobat/r12adutil.pdf
Breifly
Using adctrl you can control the workers, like quitting them, restarting them checking the status.
The purpose of restart directory is to store the last status of the workers and other information will be needed if patch needs to be restarted next time.
Thanks

After logic board replacement and software update, MacBook Pro is spontaneously shutting down and preventing restart. Inconsistent ability to restart after multiple tries. What is going on?

After logic board replacement and software update, MacBook Pro is spontaneously shutting down and preventing restart. Inconsistent ability to restart after multiple tries. What is going on?

Hard drive sensor or logic board failure.
Try a SMC Reset, only thing I can help.
http://support.apple.com/kb/ht3964
Check your tones with this sounds like it's not recognizing the RAM, perhaps it's not seated well or making a bad connection or it's defective.
http://support.apple.com/kb/ht1547
Take it back. three times a charm

Java program to restart failed message in Adapter Engine

Hi,
I am using PI 7.0.
Could anyone tell me whether there is an automated job or URL I can schedule in order to periodically resend messages sitting in the Adapter Engine receive queue that are in status System Error, Holding, or Waiting?
I want to avoid having to monitor the system through message monitoring and manually resending the messages...
Many thanks
Brian

Hi,
please check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/05/b1b740f83db533e10000000a155106/content.htm
Restarting
Instead of restarting messages with errors manually with message monitoring, you can schedule a job to automatically restart these messages. This is possible for all messages for which the number of defined restart attempts has been exceeded (messages with the System Error status).
You can define one or more rules for each job to restart messages; these rules contain conditions that a message must meet in order to be restarted by the job. At least one of the defined rules must be met for archiving to take place.
Rescheduling
A standard job to reschedule messages is created automatically. The job runs once a day and ensures that messages lost as a result of database failure, for example, are rescheduled. You can schedule additional rescheduling jobs; however, you cannot define rules for them.

Is there any way to restart Cancled Background job

Dears,
Now we have a very important background job need to run everyday, but sometime it will be canceled due to memory is not enough.
Is there any way to restart Cancled Background job automatically ?
Thanks,
Michael

Hi Michael,
To start the cancelled job manually
At SM37 just mark the job then click Job -> Change and just reschedule.
For auto
Create another job with same program name and variant , then create background processing event which gets trigger only when your job gets failed.
For Event Creation kindly reach out to ABAPers and for Event based Scheduling you can contact basis team.
BR Vaibhav

Function module to start failed batch job

Hi all,
Any function module in ABAP to start the failed batch job run which i will use in a report.
I am using SAP 4.7.
Thanks
Raj

Hi Minish,
Normally, we can call an RFC in background task as below:
CALL FUNCTION func IN BACKGROUND TASK
                     [DESTINATION dest]
                     parameter_list
                     [AS SEPARATE UNIT].
But I am not sure whether your external application can call this RFC in background. But you can create an another RFC and inside call this RFC in background.
Then call the new RFC so that it will internally call the required RFC in background and Immediately after it will be closed.
Regards,
Selva K.

SSIS package works in development environment but fails when job scheduler executes, file path invalid

SIS package works in development environment but fails when job scheduler executes, file path invalid
Relatively simple package to get OLE-DB connection to MS FoxPro 9.0 DB
The failure in the job log states that the path is invalid its a network path (\\192.168.1.xxx\foldername) this has been run several ways with the remote computer being mapped as a network drive and through the \\ notation described above.
Thinking it was a security issue between the SQL agent account and my account I tested by subsitution myself as a proxy account for the agent when running this job, again same result failed on network path.
One issue I see is that the remote computer is running Server 2000 (legacy software incompatable with newer versions)
Is it possible that this is a security issue, since if i understand correctly the current MS domain security model didn't exist until Server 2003.

Hi REIData,
Have you got the issue resolved? Based on your description, please make sure the target folder is shared properly. If the computer on which the SQL Server Agent job runs doesn’t join the domain as the server that hosts the shared folder, you have to share
the folder with everyone by adding “Everyone” to the people list on the File Sharing page of the folder and assign "Read/Write" permission to it.
Regards,
Mike Yin
TechNet Community Support

How to reprocess failed monitor jobs in Import ABAP phase of system copy

Hi Experts,
Can you please let me know how to reprocess the failed monitor jobs during Import ABAP phase as i am performing the import of data as part of system copy of ABAP stack.
But i have not got any errors so far as the import process is running fine but there are few jobs which are showing as failed.Hence how can i reprocess these failed jobs again.
Regards,
Dheeraj

Hi Juan,
Here you go.And i have not selected the option" Start migration monitor manually "and where as on Source system the guy has used migration monitor option in order to split the tables and ftp for transferring the export data on target system.
Is this error anything to do with that?
Import Monitor.java.log
Import Monitor jobs: running 1, waiting 1, completed 223, failed 13, total 238.
Loading of 'RSERRORHEAD' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 224, failed 13, total 238.
Import.monitor.log
WARNING: 2011-04-30 02:57:31
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2011-04-30 02:57:31
13 error(s) during processing of packages.
INFO: 2011-04-30 02:57:31
Import Monitor is stopped.
SAPINST_dev.log
TRACE 2011-04-30 02:57:37.578 [iaxxgenimp.cpp:699]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 1 Support Release 1 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System( Last error reported by the step: Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose Log Files to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to <code>C:\Program Files/sapinst_instdir/NW701/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/</code>. </body></html>
TRACE 2011-04-30 02:57:37.578 [iaxxgenimp.cpp:1248]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Regards,
Dheeraj

OWB maping execution :- ORA-20213: Unable to create standalone job record

Hi,
When I am running an owb mapping from sqlplus, I am getting the following error:
SQL> DECLARE
2 RetVal NUMBER;
3 P_ENV WB_RT_MAPAUDIT.WB_RT_NAME_VALUES;
4 BEGIN
5 RetVal := UII_D_MAP_SPC_WIPBIN.MAIN ( P_ENV );
6 dbms_output.put_line('RetVal is '||RetVal);
7 END;
8 /
DECLARE
ERROR at line 1:
ORA-20213: Unable to create standalone job record - there may be no task
defined for this map
ORA-06512: at "UII_OWB_REP.WB_RT_MAPAUDIT", line 1266
ORA-06512: at "UII_OWB_REP.WB_RT_MAPAUDIT", line 2098
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_WIPBIN", line 3851
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_WIPBIN", line 3993
ORA-06512: at line 5
Previously, I had unregistered the target schema from "OWB Runtime Audit Browser" logging as a QA user and registered to a new schema from OWB DEPLOYMENT MANAGER.
I am able to deploy the mapping from Owb Deployment Manager and the deployment goes OK.
I have also gone through the links:
OWB execution error : ORA-20213: Unable to create standalone job record
Re: ORA-20213 during execution
But, did not find the solution.
When I execute the mapping from Owb Deployment Manager after right clicking on it, it is working fine. But, above execution method is not working.
We want to run the mappings in the above way, because all our mappings in our other projects are running fine in the above sql run procedure.
Can you please help me out, how to fix the above errors?
Thanks & Regards,
lenin

Good morning Lenin,
Since the other threads do not apply, you've gotten yourself into a strange situation.
I'm not familiar with the method you use to run the mapping, have you tried running the mapping using the SQL-template that OWB provides or - like I do - the run_my_owb_stuff script provided by the OWB time? If not, could you try that please?
Apart from that, I don't have any experience with your exact error message so it's hard to share anything concrete, I can only suggest things. Maybe there are other users on this forum that do, who knows...
If you want concrete support, log a TAR with Metalink, they are obligated to help you if you have a CSI :-)
Good luck, Patrick

Converting files to PDF, failed print jobs

Hi,
Every time I convert a file to PDF I then receive a failed print job in my print queue. Has anyone seen this before?
Adobe prints to LPT1.
Thanks.

Yes, it's a known issue and simple to fix. See this blog post for instructions.

[SCOM 2007 R2] Alert on every failed SQL job

We want alert on every failed SQL Agent job. However, we only get one alert.
We check that SQL 2000 would alert on every failed SQL job, but SQL 2005 & 2008 didn't behavior like that.
What should we do?
Thanks.

Hello Matt,
For auditing purposes we need to email every sql job failure and sql job success. What I've seen is if the out of box "A(n) sql job failed to complete sucessfully", it will generate only one alert until the alert is manually resolved.
And the alert if generated from a server with many Sql instances, it will generate for each windows event the same alert for each instance.
If I create a rule and use "sql jobs" as the "rule target" for each application event every job generates an alert.
So, if we use "Last Run Status", when it's working, I've seen that if two failures are generated within the frequency interval specified "600" seconds by default only one alert is generated.
The MOM rule that uses this criteria from the Application event log:
Event Number equals '208'
Source Name matches regular expression 'SQLServerAgent|SQLAgent.*'
Parameter 1 doesn't match wildcard 'OnePoint - *'
Parameter 3 matches regular expression '^(失败|Fehler|Failed|Error|Échec|Non[ ]riuscito|失敗|失敗|실패)$'
As far as I can tell works fine.
One other respondent recommends using "windows computer" as the "rule target". I think this will have the same problem as the ootb rule and only generate an alert once.
I think potentially a rule that uses "agent job" as the rule target would work if in the criteria, we could add "description" contains "job name". But the gui doen't expose "event description" as a criteria.
Any help would be appreciated.
Thanks,
Paul

SQL 2008 - Create failed for Job 'MaintenancePlan.subplan_1'

Hi,
I'm having difficulty with a server set up by a third party. I am unable to save any Maintenance Plans on the server. When I do this I get the error message Create failed for Job 'MaintenancePlan.subplan_1'.
The plan will run happily if I kick it off as a manual operation.
I have tried this from priviledged accounts including (after all else failed) the sa account.
Does anyone know the cause/solution to the bug?
Pete

Hi,
Does the server have SSIS (SQL Server Integration Services) installed? Some versions of SQL require SSIS to be installed for the maintenance plans to work. What service pack and cumulative update do you have?
Thanks to Tibor -
http://sqlblog.com/blogs/tibor_karaszi/archive/2009/08/26/do-maintenance-plans-require-ssis.aspx
Sean Massey | Consultant, iUNITE
Feel free to contact me through
My Blog or
Twitter.
Please click the Mark as Answer button if a post solves your problem!

OWB 9.0.4 ability to restart failed ETL jobs ?

Similar Messages

Maybe you are looking for