Lightroom 5.2 Error: The file could not be edited because Photoshop CC could not be launched...

When I am using Lightroom 5.2, and I try to edit a file in Adobe Photoshop CC from Lightroom, Photoshop starts up and after 15 to 20 seconds, I receive the following error message: "The file could not be edited because Adobe Photoshop CC could not be launched." If I click "OK" on the error message form, the image finally opens in Photoshop.
I've uninstalled and reinstalled Lightroom 5.2 and Photoshop CC multiple times, but the edit in Photoshop problem won't go away.
Has anyone else experienced this problem? Any suggestions on how to fix this issue?
Thanks,
Mark

I am having the same problem in lightroom 5 on a mac (Mavericks). I'm wondering if it's because I have both Photoshop CS5 and Photoshop CC and somehow they are conflicting, but I don't see how. I clearly have Photoshop CC as the primary external editor.
Last night, after seeing this post, and ekupp's response, I uninstalled Photoshop CC and reinstalled it via the creative cloud and that fixed it, but today it's doing the same thing again. When I choose to edit in photoshop CC, Photoshop CC opens but I still get the error in lightroom. If Photoshop CC is already open, I still get the error. I refuse to keep uninstalling/reinstalling it... I can't lose Photoshop CS5 as I use it for designing (I like the view in mini bridge better), but I like CC for editing.
This is creating a secondary problem for me as I am ending up with a bazillion (OK, maybe 5) psd copies of the raw files that I want to edit. When I get the error, Lightroom proceeds to render the files. I really want to turn that function off because as of now I have to try to click the microscopic "x" for each file as it "prepares to edit" and that's tedious and is creating extra files I don't want.
Last thing, since I'm here and hopeful to get an answer... I have a Mac, as I stated and I like my spaces. However, when the "edit in photoshop" function works spaces continues to force me to the photoshop space. No multitasking allowed as my files are opened. I think this is a lightroom or photoshop quirk, as when I run actions I am able to go to a different space (safari or lightroom) to work as it works for me.

Similar Messages

Lightroom 5.6 Error: The file could not be edited because Photoshop CC could not be launched...

I upgraded to lightroom 5.6 recently and i am using photoshop cs 6.
My OS is windows 8 on i5 4670 with R280X gfx card 16gb ram
After editing a photo with lightroom , when I right click to edit in photoshop, immediately photoshop launch but the image isnt imported to photoshop.
After like 30sec an error message pop out saying "The file could not be edited because Photoshop CC could not be launched".
After another 10sec then the photo appear in photoshop... this is getting irritating to me.
if i select to just open the original or a copy of the original it works fine. It only happens when I try to open it with lightroom changes.
I had uninstall/reinstall both photoshop and lightroom as well as remove all the plugins i had, but the problem doesnt go away.
Another issue with lightroom 5.6 is the the adjustment brush is slow and sluggish, it is so unusable when I zoom in to use the adjustment brush.
I didnt had that issue before i upgraded. OMG
anyone have solution to my problem ?

I upgraded to the latest version of ps cc 2014 , problem resolved.
look like cs6 i outdated or something

[Solved] Error : The file or folder path /Probl?me 1 does not exist

Hello,
I encountered this error
The file or folder <path>/Probl?me 2 does not exist
while I was trying to open a directory already extracted from a zip file containing directories with special characters. In this case, it is a "è" that was misinterpreted as a "?".
I searched the forums and on google, the solutions proposed do not work for me. Although, I have to deal with these files written in french, I would like to have my locale in english (US), with a system wide support for special characters.
Attempt 1: Adding the option : iocharset=utf8 into the fstab, like this :
fstab :
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
/dev/fd0 /media/fl auto user,noauto 0 0
/dev/disk/by-uuid/24ba75ac-e52d-40eb-a599-83b394b500b2 /boot ext2 defaults 0 2
/dev/disk/by-uuid/c797f409-00bc-479a-b4d6-ab49943f644b / ext4 defaults 0 1
/dev/disk/by-uuid/668427a8-5f51-42bd-a316-fc7984bf5f4f /var ext4 defaults 0 2
/dev/sda7 swap swap defaults 0 0
/dev/disk/by-uuid/417cd1b7-8f06-414b-84d5-e8714d9646ab /home ext4 defaults 0 2
/dev/disk/by-uuid/ef9aa00e-0515-4d7b-aa23-8096e787250d /usr ext4 defaults 0 2
/dev/disk/by-uuid/17d401b7-2fc7-4d9f-8e17-657d86926d2e /tmp ext4 defaults,iocharset=utf8 0 0 <<<<<<<<<<<<<<
/dev/disk/by-uuid/71e543b6-e06c-4b0e-b1e3-3b491ff1fefe /var/cache/pacman/repos ext4 defaults 0 2
#/dev/sda12 /mnt/archive ext4 defaults 0 2
#.host:/ /mnt/hgfs vmhgfs defaults 0 0
This solution does not work, because after adding iocharset=utf8, in front or after a "defaults", after a reboot, while mounting the filesystem, there is the following error message:
Mounting Locale Filesystem :
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
$ dmesg | tail
phy0: Selected rate control algorithm 'iwl-agn-rs'
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda10): Unrecognized mount option "iocharset=utf8" or missing value <<<<<<<<<<<<<<
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
Adding 2104476k swap on /dev/sda7. Priority:-1 extents:1 across:2104476k
tg3 0000:07:00.0: irq 44 for MSI/MSI-X
Attempt 2: Changing all the locale features in KDE and in /etc/rc.conf as well.
$ vim /etc/rc.conf
LOCALE="fr_CA.utf8"
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
It is complicated to remove these directories. I had to use the inum to get precisely these directories before removing them.
$ ls -il
total 8
1577566 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 1
1577573 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 2
$ find . -inum 1577566 -exec rm -i {} \;
rm: impossible de supprimer « ./Probl\212me 1 »: est un dossier
Note that the hypothetical character 'è' is represented has a '\212', a 'È' if seen as a extended ASCII character.
These directories cannot be deleted this way :
$ rm -r Problème\ 1
rm: cannot remove `Problème 1': No such file or directory
or
$ rm -r ProblÈme\ 1
rm: cannot remove `ProblÈme 1': No such file or directory
What should I do to be make the operating system recognize those special character, and interpret them correctly ?
Last edited by ramboman (2011-01-29 21:45:50)

I found a working solution, but better solution are also welcome
I had to have fr_CA not only in utf8 but also in iso88591. I had to modify the /etc/rc.conf this way :
LOCALE="fr_CA" <<<<<<<<<<<<<<
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
To preserve the english US language system wide, I had to add the following line in the /etc/profile :
# Allow french special character while in en_US
export LANG=en_US
The character misinterpreted by a "?" is now seen :
as a "è" in dolphin
as a "?" in the console
It is now possible to access the folders.

I just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: the application has failed to start because MS

i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?

I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.

Error "The file could not be written"

Hi!
'm tyring to export some pictures in lightroon but I receive the error "The file could not be written".
Any suggestion?
Thanks

Make sure you have permission to write to the output folder and that there is enough space on the disk.
What OS are you running? What version of Lightroom?
Hal

Has anyone had the error "The file could not be read due to an error" when selecting ignore or replace image links. The linked images are in Dropbox if that helps.

I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.

Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Has anyone had the error "The file could not be read due to an error" when selecting ignore or replace? The linked images are in Dropbox if that helps.

I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.

Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Using Maverick, error message: Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

Receiving error message using current Maverick version: "Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).". Is fix the same as on previous OS versions?

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

HT200261 Configurator Error. Apple Configurator could not open your library.The file couldn't be opened because it isn't in the correct format.

I was using configurator without trouble. Unfortunately, my battery died and my computer went down. I plugged my computer in, restarted it and tried to open configurator. Now this is the error I am getting. Apple Configurator could not open your library.The file couldn’t be opened because it isn’t in the correct format. How do I fix this?

Thank you for responding. The number 2 after the file final cut events is temporary so I can copy it to another drive while I am working on this. . i got a new message that reads...
Final Cut Pro must restore or move corrupted databases before opening.

LR4 Problem: The file could not be edited because Adobe Photoshop CS6 could not be launched.

Is there a fix for this? When I try to edit an image in Photoshop from Lightroom 4 (CTRL+E), Photoshop CS6 launches immediately but with no image. In Lightroom 4, after about two minutes, the message box appears saying "The file could not be edited because Adobe Photoshop CS6 could not be launched." When I click OK, the image promptly opens in Photoshop CS6 like normal. This wan an itermittent issue for me after the LR4.1 release. I was hoping that LR4.2 would help, but now I get the error every time.
System
Lightroom 4.2 x64
Photoshop CS6 v13.0.1 x64
Bridge 5.0.1.23 x64
Windows 7 Pro x64
AMD Six Core / 3.9 Ghz
16 GB Memory
NVidia Quadro 1 Gb Video
Scratch space on three drives

This may be a cooincidence, I starting having problems after I started using a Nikon D800, which has 36MP files. LR4 released at the same time as the D800. LR4 shows signs of struggling with the larger files, which are typically 280MB TIFFs for the D800, like freezing for several seconds when using an adjustment brush or going into a spasm with the crop tool. Because Photoshop does not have similar large file issues, I'm doing more basic work in Photoshop, like cropping, dodge and burn, exposure adjustment, etc.
Because Photoshop otherwise runs fine, and appears to read all the prefernes properly mid-issue, to get a better idea of what's going on, I turned on Process Monitor from Technet. For what it's worth, LR4 appears to touch the Photoshop preferences before it launches Photoshop. LR4 must have a memory leak in that corrupts the Photoshop preferences file in a way that makes no difference to Photoshop.
My weekend project is to try Capture One to see if I can spend more time on photography and less troubleshooting Adobe problems. As it stands, LR4 is not usable for me.

Could not copy the file "C:\Microsoft.WITDataStore.dll" because it was not found.

Hi All,
I need to use "Microsoft.TeamFoundation.WorkItemTracking.Common, Version=11.0.0.0" dll in my code.
But when I try to build my application I get the below error.
"Could not copy the file "C:\Microsoft.WITDataStore.dll" because it was not found."
And when I try to include version 12 of the same dll , code gets build successfully. And when I try to consume the code(which uses the dll) I get
'Could not load file or assembly 'Microsoft.TeamFoundation.WorkItemTracking.Client.DataStoreLoader,
Version=11.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies.
The system cannot find the file specified."
how do I go ahead with this..??
Thanks
Uma.K

Hi Uma,
You might check whether the version 11 of the assembly is referenced or added into soruce control. When use the referenced files, please use the relative path for building. If the version 11 of the assembly is not added, please add it to source control and
make sure it's referenced correctly.
It would be better to let us know the TFS version that you're using. And you can also use version 12 if the assembly works fine. If you have any other concerns, elaborate your scenario with more details.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Safari could not download the file "Firefox 20.0.dmg" because there is not enough free disk space.

What does this error message mean. I have pleanty of free disk space - Safari could not download the file “Firefox 20.0.dmg” because there is not enough free disk space.

That misleading error message can be the result of moving a download while it's in progress. Right-click the download package and select Show Package Contents from the contextual menu. The file you downloaded may be in the folder that opens.

I am trying to resize disk space on parallels 6 for windows XP under configure Hardrive and I get the error resizing failed unable to resize last volume the file system of this volume might be damaged or not supported? I am on a Mac using Parallels 6

I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.

This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan

"The file 'x' could not be copied because this computer is not authorized."

I am trying to get an app (VSCO Cam) from my sister's iTunes library. We are logged onto the same home share network, and I can open her library just fine, but when I click the app and click "Import", a box shows up and says, "The file "VSCO CAM could not be copied because this computer is not authorized." I'm not sure wat computer it's talking about, buton both computers we've got up to the "Store" button, clicked "Authorize this computer", and we've entered OUR OWN Apple ID's. Now, the one we use for homesharing is different, and we both have our own apple ID's, which I put in my own, and she put in her own when asked to authorize our computers. Should we be putting in the ID we use when we homeshare when asked to authorize? Or will that change everything about our iTunes libraries.
I can import a song just rom her library just fine, it's only when I try to do the app/.

Hi john,
Follow the troubleshooting steps in this article:
http://support.apple.com/kb/ts1389
Cheers,
GB

I get message "the file could not be edited because Adobe Photoshop CS5 could not be launched." "S

I get message "the file could not be edited because Adobe Photoshop CS5 could not be launched." "Some of the application components are missing from the application directory. Please reinstall the application."
I have reinstalled from my disk three times but still get these messages! How do I correct this problem?

Reply to Trevor Dennis:
I am a long-time user, back to Photoshop 6. I have a Mac Pro running OS X 10.7.5 (Lion). I have tried to reboot and then reinstall but I keep getting the same message, that there are components missing from the appl;ication directory. The program worked well this past week so this is a new problem. As it is CS 5 I can't get much help from Adobe.

Lightroom 5.2 Error: The file could not be edited because Photoshop CC could not be launched...

Similar Messages

Maybe you are looking for