Lightroom 5 Beta – Advanced Healing Brush | What's New in Lightroom 5 Beta | Adobe TV

Discover the new enhancements to Lightroom’s advanced Healing Brush including the ability to heal and clone non-circular brush spots as well as remove easy to miss sensor dust with using the new Visualization slider.
http://adobe.ly/ZpTdfk

Excellent - a long time coming

Similar Messages

Lightroom 5 - Advanced Healing Brush and Visualization tool | What's New in Lightroom 5 | Adobe TV

Discover the new enhancements to Lightroom’s Advanced Healing Brush including the ability to heal and clone non-circular brush spots as well as remove easy-to-miss sensor dust using the new Visualization tool.
http://adobe.ly/11rZVq5

Can the removal spots (circular) be resized like they could in LR 4?

Advanced healing brush problem

After I have removed an object in LR5 using the advanced healing brush, I export the image to Photoshop cs6. The erased object (in LR 5) shows up again in Photoshop. What's going on? Another problem is that my friend uses the brush to remove some object. Even though he set the Opacity to 100%, the object is stll can be seen as the opacity is only 70%

I have installed the ACR 8.1, but it doesn't help at all. I guess the ACR just make the software to recognize photos from the new cameras. It really annoys me that the object erased by advanced healing tool comes back in photoshop so that I have the use the clone stamp in PS to remove it.

Advanced healing brush

the advanced healing brush will not remove an object from my photo in lightroom 5

I have an image of a crab with a hermit crab its back. I would like to remove the hermit crab from the photo..

Problem with Advanced Healing Brush on LR 5

I am experiencing a problem with the Advanced Healing Brush on LR 5. Using, say, the Heal option, when I have marked the area I want to heal, and then move to the source I want to copy, I cannot get the colour of my selected source point to remove the heal spot.
I have looked at a number of tutorials and working comments on using this function, and I am pretty sure that I am following the correct procedure for using the Advanced Healing Brush. I have the same problem when I try to use the Cloning option - the colour just does not fill the area I want to fix.
Is there possibly a bug hanging around? Can anyone give me any possible solutions to my problem? I so want to try out this terrific new feature in LR 5.

Thanks for your response
I attach 2 screenshots
Screenshot1 - See the orange tip of a feather behind the kid's head - I want to remove this with the heal option in the Spot Removal tool
Screenshot2 - I have demarcated a piece of the feather with the spot tool and have chosen the source color of the wooden bench
I was expecting the demarcated area to have adopted the chosen source color, but it hasn't, by a long shot. I've tried evry which way to get it to work, but no luck.
I even tried using the Clone option, choosing the same source color and painting over the orange feather, but that also didn't work.
I look forward to your comments
Sorry - forgot to add the images
Message was edited by: mandav1023

Advanced Healing Brush on Laptop Forward Slash " / "

Using the healing brush on a LapTop how do I switch between the several alternatives/ results. I have seen that presing " / " offers other results. But in a laptop you don´t have the "/ key" (only shown on top of the "7", so what key I need to press?
Sorry for the stupid question
Roberto

It sounds more like a hardware problem with how your keyboard is used to get that character. Because you need to press shift key with the 7 Lightroom may see it as either Shift-7 or Shift-/ neither of which is what you want.
1) Try pressing the Fn key together with the zero key. As there is another / key available there on your keyboard (the tiny symbols in bottom right corner)
Not sure though if your Fn key will act either as a toggle letting you use each of those characters in the bottom corner or if it is just press and hold it then press the desired other key.
2) Look for Windows software that may allow you to reprogram/reassign just one key (ie the upside down ? ) that you could enable while using Lightroom and then disable when using other apps. (something like "keyboard layout manager" never used this myself... so just a possible solution)
3) Possibly change the Lightroom shortcut key to something different than / key... look at the some of the solutons to do this mentioned in Julieanne Kost's Blog: http://blogs.adobe.com/jkost/2012/02/lr3-customizable-keyboard-shortcuts.html
Ideally #1 would be best fix.
BH

Applying results of healing brush to a new layer?

Is there a way to use the healing brush or spot healing brush by applying the changes you are making to a new blank layer instead of the original layer?
Thanks.

With the spot healing brush make sure you have sample all layers checked
before healing on blank layer.
With the healing brush make sure you select either Sample current and below
or Sample all layers before using the healing brush on a blank layer.
Also if you have any adjustment layers you can click on the button to the
right of the sampling options to ignore adjustment layers when healing.
More info
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-760ca.h tml
MTSTUNER

PE9 trouble with clone/healing brush on a new install.

Hi,
I have PE9 installed on my desktop and the program works perfectly and it also was fine on my previous laptop. Due to an accident I had to get a new laptop and that is where the issues have started.
The Clone and Healing Brush cannot be resized using the [ ] keys. I can work around using the size button on top of the image viewing area but it is much slower doing that.
Using the Quick Selection Tool I am not able to remove it when finished by pressing the Esc key. I have not found a work around for that. Ctrl-Z will eventually remove it but it also removes any changes made first!!
There could be other tools that have issues but I haven't found them to this point. Other tools are working normally. I was wondering if it was some sort of keyboard switch not working but I was unable to find anything in the laptop manual. All keys do work properly. It is a Dell Inspiron as was the previous unit.
I have unistalled the original install of PE9 and reinstalled it. Same problems. Any suggestions would be greatly appreciated.
Thanks,
Cyril

Hi Barbara,
Thanks for taking the time to help me. I tried your suggestion but no luck. However I found something by "stumbling" around. I changed the keyboard setting to US from Canadian Multilingual Standard (which was the way it came to me) and that fixed the issue with the keyboard shortcut of brackets [ ] to resize the: Healing Brush, the Clone Tool, the Dodge and Burn tools. They work fine as long as US is selected for the keyboard language.
As for the use if the Esc key, after working with Adobe we found that the Esc key on my BRAND NEW laptop was not working!! I guess that explains why the Esc key shortcut wouldn't work in PE9. Oh my, you gotta love our new technology!!!!!! That then led me to a couple of hours on the phone with Dell about replacing the system. The joy just continues to flow. :-))))))))))))
Anyway, Adobe had not heard of the "Canadian Multilingual.. keyboard selection" being a problem for PE9 and those keyboard shortcuts, so if anyone else has this issue, try that! It worked for me. I am definitely tired of the phone after today. Hoping for a smoother day tomorrow. All the best.

BUG: Advanced Actions duplicated when creating NEW PROJECTS FROM TEMPLATE using Adobe Captivate 8.

Need: CREATE NEW PROJECTS FROM TEMPLATE using Adobe Captivate 8.
Problem: NEW PROJECT (.cptx) duplicates the Advanced Actions originally configured within TEMPLATE FILE (.cpt.).
For example: Template file (.cptl) advanced action "_initializeModule" gets duplicated as "_initializeModule1", "_initializeModule2", "_initializeModule3" within NEW PROJECT. FYI, the original "_initializeModule" advanced action still appears.
MAJOR BUG, what the heck is going on?!?!!! Planning to deploy this template file to use for multiple courses with multiple users, this WILL cause epic confusion across the board.

Similar problem, think they are working on it as well: when dragging a shared action from an external library to a slide or object event, and that action is using a parameter that was already created for another shared action, there will be a new parameter created which really screws up the shared action contrary to this problem. Tip: for the moment do not drag shared actions from an external library immediately to an event, but drag them first to the Library: Reuse Shared Actions in other Projects - Captivate 7 vs. 8 - Captivate blog

Problem with Enhanced Healing Brush

LR5.0, Windows7 (64 bit)
I am having a problem with the Advanced Healing Brush, where the colors in the destination area don't match the colors in the source area, even with opacity at 100. Is this a known bug, or is this something I am doing wrong?
Here's the original picture. I want to remove the date, and the spotlight underneath the date, on the bottom right.
Using the enhanced healing brush, I try to remove this and replace it with a similar area of grass
You can see the opacity is 100, and yet the color of the grass in the destination area is noticeably darker than the color of the grass in the source area.
So, what is wrong here? Bug, or user error?
By the way, I also performed a similar operation in Photoshop Elements, with much nicer results.

Hi DJ,
I find the healing brush a bit so-so. I've had the same result as yourself - it will blend in poorly leading to muddy tones.
Also the boundaries of the brushed area are too distinct. Overall, I see the clone setting as more useful.
I've had a cut at your picture, using multiple selections. I could do better,(the shadow lines are not well aligned) but I think this illustrates my point.
I find that one large selection (even though that's the example used in the LR video) rarely works well for me.
I think this tool can use some improvement.
Hope this helps,
hans

Spot healing brush vs. healing brush?

Does one of these tools generally result in better results than the other? Besides having to continue to sample with the spot healing brush, what is the difference?
Thanks.

It all depends where you are correcting. if in the middle of a large area, the spot one might be faster. If you are sampling close to areas you do not want to be used as the source, select the healing brush.

What's New and What's Fixed in 2014.1

First, here are links to the two main documents about new features in the 2014.1 release:
Product Manager Al Mooney's blog: Premiere Pro CC 2014.1 Release
The What's New page in the Help: Adobe Premiere Pro Help | New features summary
(I'll review both of those documents ASAP to see if any little goodies got skipped.)
And now, the bugs that were fixed in this release:
Import
Import of CinemaDNG clip fails if the file has been renamed.
Gamma shift in some re-imported QuickTime IMX clips
Some QuickTime Reference files import without timecode.
Indexing of XDCAM clips can take an excessively long time, footage shows Media Pending until indexing completes.
XAVC-S files import without Timecode
Unable to import certain XDCAMHD 422 Long-GOP clips with Pixel Aspect Ratio of 0.7500 MXF
Spanned XDCAM HD422 clips not handled correctly if the clip names do not follow the normal convention
When a sequence is loaded from Media Browser to the Source Monitor and then inserted to a sequence without explicitly importing, two copies of the sequence are added to project.
Scaling values are not properly handled for clips/sequences imported via an XML file written by some shot management and conforming programs
If the reported duration of an XDCAM HD MXF clip shorter than the actual length in the file, then frames outside the stated duration can be accessed.
Some XAVC and XDCAM-IMX-MXF clips have audio noise introduced on playback
Some .mp4 have green frames and 'static' garbage when played in Source Monitor
Canon XF300 Footage has unacceptable performance for playback
.mp4 clips generated by certain transcoding programs exhibit poor playback performance
PPro no longer recognizes timecode from a .qtc file, referenced from within a QuickTime reference movie.
Some XDCAM422 clips fail to import with generic error
Occasional crash on opening Source Settings for DNG footage, with 2nd monitor enabled
Overexposed white areas in some CinemaDNG footage display magenta artifacts.
When scrubbing C300 clips in Project panel’s Icon view, red frames sometimes show and Event panel reports error decoding frame.
If SpeedGrade was installed before Premiere, then double-clicking a prproj file launches SpeedGrade (Mac Only)
Growing Files
The last frames of some growing file are green. Must relaunch Premiere to correct the problem.
Importing a growing file can take an exceedingly long time, with footage showing as Media Pending
When a growing file refreshes, it stops voiceover recording
The incorrect timecode is shown in the Timecode Panel for growing files.
Timeline playback of growing files drops audio for about 1 second each time the growing file refreshes.
QuickTime reference files for growing files fail to import.
Export
When source is 120fps, export fails if Match Sequence Settings enabled
The Advanced XDCAM Settings section in Export Settings is blank for imported XDCAM presets
In QuickTime encodes, audio exported as uncompressed stereo imports into FCP as dual mono.
When you export to 5.1 AAC with the “Import into Project” option enabled, the resulting clip fails to import, throwing
“File import failure”
Image flicker is introduced in some constant-bitrate MPEG2 encodes
When the only variable blocking smart rendering is an adjustment layer, the effect(s) thereon are ignored and the segment is smart rendered.
ProRes media encoded by Premiere causes are not compatible with certain video QC programs.
AAF export: 88.2kHz and 96kHz audio clips exported to AAF do not appear in some audio production programs.
Audio EDL gets wrong source timecode if clip is nested or part of a multicam source sequence
EDL does not give correct Source In and Out for clips with speed reversed.
EDL does not give correct source in and out on reversed clips.
OMF export fails with some multicam sequences, reporting Audio Export Failure.
Hang during OMF export when the sequence contains a 5.1 audio track/clip.
Smart rendering can introduce black and red frames
Playback
Playback of IMX 50 clip freezes after 12 seconds.
With XDCAMHD and DVCProHD footage, frames are sometimes dropped though the render bar is green.
Audio for some mp4 files plays back at double speed
When pre-roll is set to 1 frame, timecode and video of XDCAM .mxf files are out of sync
Some DNxHD do not decode properly, resulting in frames being played out of order
Performance of playback for some QuickTime is poor because they are unnecessarily falling back to QT32
Dropped frames when playing R3D clips with RocketX enabled and Playback Resolution at ¼
Audio
With Maintain Pitch enabled, no audio when playing at slower than real-time
Solo buttons in Audio Meters do not work for clips loaded into the Source Monitor
Mono and Standard track puck and tray panner routing for Ls, Rs, C and LFE channels do not adhere to ITU-R BR.1384 standard.
Occasional crash on switching a clip from mono to stereo via Modify>Audio Channels
5.1 channels are not properly mapped for some Dolby content.
5.1 clip changes to a 6 mono channel clip when “Extract Audio” or “Edit in Adobe Audition>Clip” is performed on a project item or track item.
Changes to Frame Rate via Interpret Footage are sometimes not applied to saved for all audio streams, causing most audio channels to be out of sync after closing/reloading project.
Constant Power audio transitions introduce buzz if either track item has zero channels (generally limited to multicam clips)
Crash on applying changes in Modify Audio Channels dialog [Mac Only]
Project Panel
Sorting by Duration is broken if the column has been moved during the current session
If the Project panel is filtered via Rapid Find when a bin is created, the edit control for naming the new bin does not become active automatically, and it cannot be activated manually until Rapid Find is cleared.
Project items cannot be deleted or renamed if the list view is scrolled to the right.
Project panel does not autoscroll to the left when a column is dragged to the right side of the Name column
When a timecode value is typed in the Video Out control for a clip in the Project panel, the value gets reduced by 2 frames upon committing the change
Subclip
When a soft subclip with only an Out Point set is edited into a sequence, the Subclip Start is ignored; the resulting track item extends all the way to Media Start.
The Media Start/End and Subclip Start/End times for subclips from a merged clip are incorrect
Editing/Timeline
3-Point edit: If the source is a sequence and only an Out Point is set for the source, the wrong segment gets inserted when KEM Roll is set to Insert as Individual Clips
Keyboard trim commands do not affect clips on targeted tracks that are outside of visible area of in the Timeline
Switching between sequences can turn the render bar red.
Frame Hold option doesn't generate the freeze frame when speed change is in effect
In the Timeline, the FX badge gets hidden when the clip is not wide enough to show the full clip name.
If the Left/Right Balance control is displayed in Timeline header, the balance will change if the mouse strays over the Header region during click-and-drag operations in the Timeline (such as trimming out)
'Select In to Out' selects clips on locked tracks.
Multicam
If time-remapping is used on a Multicam Source Sequence, the Program Monitor's multicam view continues to play at 100%; if source sequence was slowed, the Composite view goes black after the original end point.
When a multicam source sequence has been slowed down via speed change or time remapping, the extended of the clip goes black—no video
If the audio in a multicam sequence is selected when it is flattened, the audio is sometimes deleted.
Disabled multicam source clips are sometimes rendered to the composite output
The camera can be changed for a multicam clip on a locked track.
The overlay displays timecode in audio time units for part of a multicam sequence if the source clips are stereo and the MC sequence is mapped to mono
If a nested multicam sequence's duration has been increased via Time Remapping, then upon reaching the original end point during an editing pass, the composite view restarts from beginning
Flattening
If a multicam sequence’s audio is 5.1 or adaptive, then flattening deletes the audio.
Crash on flattening multicam clip with keyframed scale when using a camera angle that does not start at time zero.
Flattening multicam can remove some audio clips from the sequence.
Flattening a multicam sequence with reverse speed applied results in incorrect frames being used
Effects
AE Text Template] When text fields are active for editing, they’re not being visually highlighted
Adding mask points very close to each can result in the ordering of the points being incorrect
Incorrect scaling of 1920x1080 adjustment layers in 720 sequences
Unexpected behavior with Cross Dissolves between Adjustments Layers.
Applying both Echo & Levels effects to an adjustment layer causes video playback to freeze
Crash on rendering previews for a Lumetri filter in Software-Only mode.
Crash on deleting a clip from a sequence after pasting an effect mask to the clip.
JPG frame sequence gets scaled down if an adjustment layers is in effect above it [OpenCL only]
Rename GoPro lens distortion presets to include the camera name
Clip name effect doesn't work correctly if Source Track is set to a different track.
Crash on using Clip effect or Timecode effect on a transparent video.
Crash on loading or applying VST Effects (Mac only)
Intermittent Crash with Warp Stabilizer applied (AEVideoFilter)
The Clip Name effect does not work when applied to a transparent video track item, with Source Track set to a video clip.
Crash on applying audio transition to clips with overlapping timecode
Previewing fails when an adjustment layer has an animated mask applied to Opacity and any other video effect.
In Software-Only mode, rendering previews of the new Cross Dissolve is slower than the old one.
Masking and Tracking
Shift-dragging a control point for an effect mask sometimes yields unexpected results
If a clip has an effect with a mask applied, moving the clip in the Timeline cause rendered preview files to be lost.
Previews rendered to a P2 codec are incorrect for the first 10-30 frames of an Opacity effect with mask applied
If a mask is applied to a GPU accelerated effect on an adjustment layer, the Program Monitor shows a cropped frame with Playback Resolution at Half and goes completely black at Quarter.
Opacity effect on Adjustment Layers fails to render within the mask with tracking.
After rendering an adjustment layer with multiple effects with masks applied, some of the effects are no longer confined within the mask [Mac only]
Crash on opening some projects with masking and tracking applied to effects
Direct Manipulation control fails to switch between multiple masks that are applied to the Opacity intrinsic effect.
3rd Party
Certain audio filters cannot be applied to a clip in a sequence that is imported via XML
PPro reports audio filter missing when opening a saved project with certain audio filters applied to the clips in a sequence that was imported via XML
Artifacts are introduced when using certain 3rd party transitions.
Certain 3rd party stabilizer plug-in are not working
Markers
On mouse-up after adjusting the Out point of a marker with duration, the playhead jumps to the marker's In point.
Video in Program Monitor strobes when dragging the In or Out point of a sequence marker
GPU
With GPU acceleration enabled, Gamma is being applied to some RAW media when it shouldn’t be.
Basic 3D effect can result in Program Monitor’s video overlay to become corrupted on some GPUs
Performance (Note: Most of these fixes are also listed under a product area)
Locking all Audio Tracks can significantly impair performance.
Performance of playback for some QuickTime is poor because they are unnecessarily falling back to QT32
Dropped frames when playing R3D clips with RocketX enabled and Playback Resolution at ¼
Navigating through projects in multiple Media Browser panels impairs performance and can culminate in a crash
In Software-Only mode, rendering previews of the new Cross Dissolve is slower than the old one.
Canon XF300 Footage has unacceptable performance for playback
.mp4 clips generated by certain transcoding programs exhibit poor playback performance
Interop
Crash on selecting Edit>Edit in Adobe Audition>Sequence...
When a 5.1 clip is sent to Audition via Edit Clip In Adobe Audition, the first channel is used for all channels.
Exporting from Audition to Premiere Pro opens Premiere, but the file fails to import
After grading a sequence in SpeedGrade, Premiere regenerates index & pek files
Miscellaneous
With some capture card hardware, captured uncompressed clips have the wrong field order
In the Overlay Settings dialog, the Track control is not properly constrained by the Property control.
A single preference flag is used for the "Import into Project" setting in the Export Settings dialog and the Export Frame dialog; they should be managed independently.
Custom scratch disk location for Video and Audio Preview folders get’s reset to default, “Same as Project File"
Changes to the label color cannot be undone.
In the Usage lists, all instance are ordered by track item start time; should sort by Sequence Name first, then by track item start
Automatic relinking fails in certain cases when the name of a folder in the relative paths are too similar. [Mac only]
With OpenCL GPU acceleration and Transmit enabled with some 3rd party I/O cards, the video on the output monitor is corrupted
Newly created projects sometimes have multiple Project Panels open.
And in closing, a request: If this post prompts you to think "Great, but what about..." or "Thanks, but I just found this new bug in 2014.1," please start a new thread--after, of course searching to see if there's already a topic on that issue.
[And Shooter, I apologize in advance if the foregoing contains any typos ;-)]

Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh.

What's New in Illustrator CS6 | Visual Design CS6 | Adobe TV

Adobe Design evangelist Rufus Deuchler provides an overview of what's new in Illustrator CS6
http://adobe.ly/I7OPj9

Me parece algo inverosimil ver a una persona diseñando en un portatil y moviendo vectores u objetos con trackpad, si pudiesemos modificar eso quedaría más creible y profesional. De todas formas el video es bastante ilustrativo.

What's new with CC expressions?

Just curious if there's any new controls exposed to expressions in AE CC? Has there been any change in expression performance?

Here is the complete list of what's new and changed:
http://blogs.adobe.com/aftereffects/2013/04/whats-new-changed-after-effects-next.html
There's nothing there about expressions.
However...
We are right now working on some improvements regarding expression performance and usability, and we hope to make some of these available soon.

Will upscaling or using clone stamp/healing brush to upsize give better resolution?

I'm designing a 5.25" square CD cover using a rectangular image and the resolution needs to be min. 300ppi to print . The artist sent me the art image (painting) from her camera as a jpeg and it goes to photoshop as a large (approx 20" X 24") file at 72 ppi. To change the ppi to 300 without resampling (I've been told this is best), the image becomes too narrow (4 1/2") and too high (5.9").
I don't want to crop because I don't want to lose content. I want the image to completely cover the CD cover And I want to keep the same proportions for certain parts of the image. So I believe my two best options are as follows:
1. Bring the image to 300ppi with the measurements above, protect certain parts of the image on an alpha channel, content aware scale the rest of the image wider to make it square and then resize down a bit for the CD cover or
2. Bring the image to 300ppi and then use the clone stamp and healing brush tool or content aware fill (doesn't work so well on this image) to duplicate and extend the sides of the image to widen and square it and then resize down a bit for the CD cover.
Does anyone know which of these options will give the best resolution? Is upscaling more likely to cause pixelization than the other option? Is there a better way? Should I do options 1 and 2 to the large 72 resolution image instead of bringing it to 300ppi first and then upscale or clone stamp--would that give better results?
Thanks, any help is greatly appreciated!

You've said that you don't want to crop, and you want to cover the entire CD cover. That leaves you with two choices. Extend the short side(s) via cloning, content aware fill, etc. or stretch the image in one direction, either with the standard free-transform or with content aware transform. See what looks best. Your resolution will be fine. You can res up if you need to. The amount you're short will not matter here. Leave room for bleed - usually 1/8".

Lightroom 5 Beta – Advanced Healing Brush | What's New in Lightroom 5 Beta | Adobe TV

Similar Messages

Maybe you are looking for