Lightroom Help desperately needed please.
Hello all Im praying someone can help me here as no one has been able to yet. I have Light room and Ive imported my pics from new york but the thumb nails along the bottom of the editor are all orange, at first they appear normal as they looked in camera and as I saw with my own eyes at the time of taking them but once imported into LR the thumbails are normal until i click 1 then they all turn orange.Its driving me mad as I cant start playing with my pics. I'll post some pics of what I mean and my colour manangement settings etc etc. Ive been told it could monitor settings, profiles etc but I have no idea what im looking for, a walk through of how fix this would be amazing thanks guys in advance
Similar Messages
-
Can anyone help please.? Since upgrading my Ipad to OS 7 I can longer access my music on iTunes. iTunes says upgrade to version 11.1 but my IMac will not allow this. My Ipod won't upload either. Help!
You need to buy a Mac OS X 10.6 DVD, install it, and run the 10.6.8 combo updater. Mac OS X 10.6 requires a Mac with an Intel CPU and at least 1GB of RAM.
(94902) -
Help urgently needed please ! My Iphone 4 is on silent vibration mode, received a call and has frozen with the Iphone unusable and yet vibrating. I have tried switching off, connecting to power, connecting to laptop and removing SIM card ???
Problem solved... just saw the answer in another thread... https://discussions.apple.com/message/13110222#13110222
-
Outlook 2007 backup help desperately needed
I am moving in less than a week and I desperately need to back up my Outlook to an external drive because my desktop computer
is going on the moving van. I added the Outlook backup add-in today, but it is not working. I have it set (under options) to save to K:\Outlook\outlook backup.pst When I exit Outlook, I get this message: The J:\Outlook\folder does not exist. The file might
have been moved or deleted. Do you want to create it?
How can I get it to stop looking for a J drive? I don't have anything in my J drive, so even if I choose yes to create it, it is unable
to create the Outlook folder and the system cannot find the path specified.
Steps I have tried so far, which have failed:
1. Reboot the computer
2. Disable and re-enable add-ins
3. Delete and re-install the add-in
4. Try saving to a different external driveHi,
Change the backup location of a personal folder to any other drive apart from J:\drive as it doesn’t exist in your computer.
To change the backup location of a personal folder file:-
1. On the File menu, click Backup.
2. Click Options.
3. In the Backup these personal folders files list, click the file you want to change the backup location for, and then change the location in
the Backup the file selected above to this location box.
4. Click OK.
5. Click Save Backup.
I hope the information is helpful.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Please help, desperately need to get iTunes back on my computer
Hello all, I will make this as short as possible.
I just installed a new, larger and faster HD on my Dell Inspiron 5150. It is the same brand as the other and is working fine. I use backup software and retored my HD to the same condition that it was in before the change. I started iTunes and retrieved my Podcasts and even loaded a CD on it. I was in the process of backing up the HD and I wanted to load the podcasts and CD onto my iPod. It would not connect to iTunes no matter what I did. I stopped the backup and it still would not connect.
I decided to re-install iTunes, went to the Apple site, downloaded the program and it would not install over the old version. I then deleted the older version using add/remove programs and tried to install. When I click on <<Run>>, I get a flash on the screen of Quicktime and then nothing. I then deleted Quicktime from the HD and the same thing kept happening.
I came here and saw a post about Norton so I disabled that and again the same. Then I saw a post about installing Quicktime first, same result. I can see <<quicktime>> and a progression bar for only an instant each time. I am rebooting between all these tries by the way.
Can anyone PLEASE help me to get my iTunes back. I do not have a disc. Can I buy one at Best Buy?? Everything is running fine but it just will not begin the installation.
If there is a solution on this board already, please point me to it. I need iTunes, I don't think I can function without it?? what could have gone wrong??? Again Please, PLEASE help me out.
Thanks so much in advance. I will keep searching for answers in the meantime.
Mike (PLEASE HELP)If your library was working on your computer and then popped up empty all of a sudden then this might be what you need...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Locked out of iphone 5s. Help desperately needed.
Have locked myself out of my iphone (5s), can't remember my password and it wont let me use my fingerprint. Have tried to restore it but the problem is it requires me to turn icloud off and to do that I need to type my password in. I also followed some silly advice and have deleted the find my iphone from my mac so that won't help it. It's very new and am panicking a lot, please please elp!
Google "iPhone recovery mode".
-
Ant, eclipse help is needed please!!
Hi all,
I have a quick question in regard of ant and eclipse. If any of you know how to resolve this problem, please let me know . ok so the problem is the following.
Is there a way to use Apache ANT to compile and execute a particular file in eclipse without specifying the class name? I can do that in cygwin using VIM with the command %:t:r However, I haven't found the solution to do so in eclipse. Any idea or tip or solution is appreciated very much.
i.e. I can do this in cygwin. ant -target=%:t:r run this will automatically pick up the java file that I am currently working on and run it without telling ant which class I want to run. SO I would like to do the same in eclipse.
Take care and God bless!Originally posted by: gregg.newatlanta.com
Ahhh, commons-net.jar!! That was the ticket. Thanks for your patience.
I had jakarta-oro-2.0.8.jar (which seems to work fine) but not
commons-net.jar !!
Thanks again!
Gregg
> The JARs you are seeing are the Ant JARs that make use of the library
> dependancies.
>
> You will need the JARs as outlined in
> http://ant.apache.org/manual/install.html#librarydependencie s.
>
> You will need the jakarta-oro-2.0.7.jar from http://jakarta.apache.org/oro/
> and the commons.net JAR from
> http://jakarta.apache.org/commons/net/index.html
>
> HTH
> Darins
>
> "Gregg Orangio" <[email protected]> wrote in message
> news:cnd180$5r7$[email protected]..
>
>>Thanks for the reply. However, it appears to me that Eclipse 3.0 does
>>ship with these library dependencies. The Ant Home Entries in the
>>runtime classpath shows the following libraries:
>>
>>.../plugins/org.apache.ant_1.6.1/ant-commons-net.jar
>>.../plugins/org.apache.ant_1.6.1/ant-jakarta-oro.jar
>>
>>These Jar files do indeed exist on the Eclipse installation. Are these
>>not the correct versions to allow the "telnet" task to be recognized?
>>
>>even though it appears to me that something else is wrong, I went ahead
>>and installed newly downloaded versions of ant-commons-net.jar and
>>jakarta-oro-2.0.8.jar from the Ant website. Adding these to either the
>>Ant Home Entries or the Global Entries does not correct the problem.
>>
>>Please help.
>>
>>
>>
>>Darin Swanson wrote:
>>
>>>The telnet task (as an optional task) has library dependencies that do
>
> not
>
>>>ship with Ant.
>>>
>>>See http://ant.apache.org/manual/install.html#librarydependencie s
>>>
>>>For telnet you need commons-net.jar and jakarta-oro 2.0.1.jar
>>>
>>>Likely your best solution is to add these JARs to the global Ant runtime
>>>classpath via the Ant preferences.
>>>
>>>HTH
>>>Darins
>>>
>>
>
> -
Design Help Desperately Needed
Hi everyone, Im still here waiting for someone to help me out. Im really desperate, keeping my job depends on getting this right.
My main web page is here www.domesticcontractprofessionals.ca to give you an idea of what Im asking help for.
...In the header file there are several pics. Beside the pics there are scroll over buttons. Id like the first button, that says domestic contract, open when the page loads. Thats all, I just need to to be open until someone scrolls over the other.
Thanks so much for whoever helps me out here. You have no idea how grateful I am.
File can be found here...
http://uploading.com/files/cab78emc/header_v8.fla/
Im a beginner so please walk me through this one if you can. Much appreciated.The easiest thing I can tell you is to publish your flash
with an html page and then either copy the code from that page and
paste it into your html page or modify the page created by flash.
What’s happening is if you use the “insert flash
object” button in dreamweaver it is using an older embed code
without the parameters that links the AC_RunActiveContent.js that
your flash piece is apparently looking for (I’m guessing
it’s created in CS3).
Hope that helps. -
Help desperately needed w/ Spry/XML thing
I am in dire need of help. I altered the products demo from
the Spry download and am am creating a gallery type thing where you
click on an item in the list, and the image changes. I have that
working fine. I then created a forward and backward button so you
could scroll through the images that way. And that works fine.
However, even though the image changes, I can't figure out how to
get the proper item highlighted in the left navigation.
For example, if I start on the first item (Atari Lucasfilm)
and click my forward arrow, the image will change to the Adobe
picture, but the navigation on the left still has Atari Lucasfilm
highlighted.
Here is a link to the website
http://www.3hounddesign.com/Paul_Woods/identity.html#
Here is a link to the xml
http://www.3hounddesign.com/Paul_Woods/identity.xml
And here is a link to the javascript
http://www.3hounddesign.com/Paul_Woods/gallery.js
Any help at all would be greatly appreciated.The only reason I have the gallery.js included at all is
because I am a massive javascript novice who has no idea how to
create a button that would go to the next/previous image. Therefore
I went to the gallery demo and pretty much copied the
<a href="#" onclick="StopSlideShow();
AdvanceToNextImage();" title="Next">
I figured I would need to attach the javascript file that
went with the gallery demo in order to make that work. I'm not sure
what errors it created. I used Firebug, but couldn't quite figure
it out.
If there is an easier way to create a forward button that
would advance to the next image AND have the proper item
highlighted in the left navigation, please please please let me
know. Like I said, I am not very familiar with javascript, and am
on a deadline and trying really hard to figure out a bunch of stuff
and pretty much knocking my head against the wall.
Thank you for your help!
Once again, here is the website
http://www.3hounddesign.com/Paul_Woods/identity.html#
Here is a link to the website
http://www.3hounddesign.com/Paul_Woods/identity.html#
Here is a link to the xml
http://www.3hounddesign.com/Paul_Woods/identity.xml
And here is a link to the javascript (which is probably not
what I should be using)
http://www.3hounddesign.com/Paul_Woods/gallery.js -
Hi everyone,
My Mother's account has been taken over. She received an e-mail saying that her e-mail was changed, there was a link to report the abuse, but to do it you need to sign in - we can't, since that person changed the password most likely.
I can't contact ANY service, there is no live chat for me, no phone to call.
Can someone please help?
Her account is (removed for security) . the only correct e-mail is the one registered, it was never changed by us.
And this scumbag who took her account is now online! Please help us to get the account back
Solved!
Go to Solution.Just open the link below to report your hacked/stolen account. Select Security and Privacy as Help Topic and Identity Theft/Account Takeover as the Related Problem. Then Click the Continue Support Request button near at the bottom of the page.
https://support.skype.com/en/support_request?needsLogin=false&topic=****************241&problem=****...
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com -
Help Desperately Needed to restore Photoshop 10 catalog to Windows 8 computer and PSE 11
I am trying to backup my Photoshop Elements 10 catalog from my old computer running Windows 7 and restore to my new computer running Windows 8 and Photoshop Elements 11. I reconnected missing files, optimized and repaired the catalog, then repaired and re-indexed visual similarity date. I backed up to the hard drive on the old computer, copied the files to the external hard drive, copies the files from the external hard drive to the desktop of the new computer. From there I opened PSE 11 organizer and tried to restore. When the restore is almost complete I get the following error: "error encountered while restoring. It's recommended that you contact the disc drive manufacturer and upgrade to the latest available firmware for your specific disc drive before trying again.". I also had disabled the virus protection on both computers. I have contacted the external hard drive manufacturer and they are confident the problem is not with the external hard drive. I have spent countless hours on chat with Adobe Technical Chat. I have done everything that has been suggested to fix the problem and I still get the same error message. They referred me to their 800 number for paid technical support and I was on hold for a total of 4 1/2 hours and after being trransferred several times no one came back on the line to help. I have an open case with them and they still have not returned my calls. I even tried using the same backup catalog file and restored to another PC running Windows 7 (and Elements 10) and it worked. Why can't I restore the catalog to Windows 8? Any help is greatly appreciated!
Please refer to following link:-
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catal og-photoshop.html -
Self Assigned IP - Fixed, but help still needed, please
I'll add a bit of a back story first which I hope will help people understand my issue, but also hopefully lead people with a self-assigned IP issue to a fix (link is within the post)
I’m on on an iMac 20″ Mid 2007. I recently updated to OSX Lion after having wifi connection issues in Leopard. I used to randomly get kicked off my wifi and given a self assigned IP. With Leopard, the issue was fixed by applying a manual IP, router address etc and restarting. The issue would return months later, but I got over it after a few tantrums.
Then as soon as I updated to Snow Leopard, I instantly had no internet access and I could only upgrade to Lion if I downloaded system updates. So after a few hours of searching, I toggled my internet sharing ‘on & off’ and that was enough for that fix.
But then I upgraded to Lion and again, no internet. And nothing worked for me at all, every fix on the internet I tried failed. If my airport ever managed to connect to my router I would get a self assigned IP. Or it would say it was connected but there was no internet. So I hunted for hours and eventually found this:
Now, here is a fix for anyone who is having the same issue. I hope it works for you!
http://www.davidpierron.com/index.php/archives/2009/04/13/289/
This did work for me. The fix is to flush your ipfw through terminal, and it worked for me instantly.
However, I now have another issue that I really hope people can help me with. It's not as annoying as the above, but my god it's still very annoying!
Here are some bullets to show the tedious routine I have to go through in order to connect to the internet via my airport.
• I turn on my mac and my it tries to connect to my router automatically. But after a minute of trying, it says it can’t connect.
• I select my router manually from the list and have to enter my password manually, even though it is already saved in my Keychain.
• It then connects and says, ‘Connected but no internet’, so I leave it for two minutes and throw things around the room.
• After those 2 minutes it connects to the internet. But no, I can’t browse the web as the browser says 'DNS look up failure'.
• So I open terminal, enter 'sudo ipfw flush' to flush my ipfw and BINGO, I’m online 5 minutes after logging on to my machine.
The router I am using was only issued to me 8 months ago by my new ISP here in the UK, it connects via WEP and has always been stable for every other device I have connected to it. But I am going to ring up my ISP and see if there is a new router I can get.
If anyone - ESPECIALLY APPLE who seem to be shying away from admitting there has ever been an airport wifi issue - has any information to advise me, then please let me know.
Also if you are having a Self Assigned IP address issue and that fix above works, give the man some credit on his blog, and if you know him, give him a kiss from me!
ThanksUpdate:
I spoke to my ISP to see if they had any newer routers and if they did WPA now.
I have a new router on its way and they have updated my router to do WPA!
The result?
I now connect to my router automatically after a restart. No issue there.
However,
It still can't find the internet when it first connects.
I still have to wait 2 minutes for it to find the net.
I still have DNS issues once connected
I still have to flush ipfw before it works correctly. -
Wireless help desperately needed!
I have a laptop with wireless capabilties. I don't have broadband, cable or DSL...I mostly use dial-up but when I go to a cafe/bookstore/wi-fi spot etc. I use wi-fi. I have AOL and on the sign in screen I always was given an optoin on how I wanted to connect to the internet: home (dial up), broadband or TCP/IP connection. When I wanted to use the wi-fi signal I would choose the TCP/IP option. About two weeks ago that option disappeared and now I cannot connect to the internet using a wi-fi signal. I do have a signal because my signal strength is "excellent" ,my signal speed is 54.0 Mpbs and my connection status is established...so what is the problem? I have spoken with various AOL techs and while they have tried their best to help me no one has been able to help me. If it helps I use Windows XP, AOL 9.0 and have my own IP address. I love my wi-fi connection to the internet but I don't know how to get it back! Can someone please help me out? Thanks!
What do you mean when you say that you "have your own IP address"? Did you set your computer to a fixed LAN IP address? If so, what address did you use? When did you set the computer to a fixed LAN IP address? The same time your wi-fi went out? Or perhaps, did your wi-fi go out when you tried to connect at a new wi-fi location?
If you are using a fixed LAN IP address, you will only be able to connect to networks that use that same address range. For example, if you set your computer to 192.168.1.5 with a subnet mask of 255.255.255.0, you can probably connect to a Linksys router, since they usually use 192.168.1.x addresses. But you will not be able to connect to a wi-fi router set to the 10.0.0.x address range, or to the 192.168.2.x address range, or to any other range other than 192.168.1.x
Generally, to connect to wi-fi, you should set your computer to obtain a LAN IP address "automatically" from the "DHCP server". The DHCP server is located in the wi-fi router. With this setup, you can connect to the wireless router, regardless of what address range it uses.
Message Edited by toomanydonuts on 03-05-200701:41 AM
Message Edited by toomanydonuts on 03-05-200701:44 AM -
Immediate HELP IS NEEDED PLEASE!!!!!!
Dear Mr. Pedram Afshar and the Best Buy associates,
I have no choice but to write to you about my horrible expereince.
I have purchased 2 laptop from Best Buy.com via ebay site from BestBuy account.
The laptop fails to meet the standard since they always crashes and we need to return these 2 laptops ASAP.
We got the notice and approval from BestBuy that we can return the laptop via BestBuy store or mail it back by requesting a RMA pre-postage paid RMA Label.
I have been to the Best Buy Store and was refused to return these laptops.
I have called customer services and spoke with even the supervisor and was assured that the lable would be emailed it to me so I can return the machine --- that was 4 days ago.
I have emailed in Ebay to Bestbuy over 30 times and was promised the RMA labels to be emailed it to me, and as of today, I have gotten no labels.
I have then called once again yesterday and the customer service promised that it will be emailed it to me, and the lables are not in my email.
As the return period is approaching in a few days, There is no way I can return these laptops without the prepostage RMA labels which were promised to me time after time after time.
Would you please kindly look into the issues for me please?
The RMA for the pink laptop, which was for my daughter's birthday gift, is: {removed per forum guidelines}
The RMA for the blue laptop, which was for my son's birthday gift, is: {removed per forum guidelines}
I have BestBuy in writing to return these laptop, postage paid by BestBuy... but as of this point, I am not getting any of these labels to my email address...
Please kindly send them to me ASAP so I can return these laptops accordingly --- with time extension since the delay is caused by BESTBUY.
Thanks.
EricHello Eric,
We recognize that there are always times when a device doesn’t meet a customer’s level of expectations, and its one reason why we have our Return and Exchange Promise. As this typically applies to even our EBay store page, I’m sorry to hear of the difficulties you’ve encountered while attempting to return your laptops, especially as it sounds like you’ve asked us for assistance multiple times without success.
Upon review of your orders using the email address you supplied when registering for the forum, it seems your computers’ Return and Exchange Promise period expired prior to you reaching out to us for a return shipping label. This could explain why neither our customer service agents nor our managers could authorize a return for your computer. Having said this, I’ve sent you a private message so we may discuss this in detail. You may view it by logging into the forum and clicking on the envelope icon in the upper right-hand corner of the page.
Thank you for posting,
Alex|Social Media Specialist | Best Buy® Corporate
Private Message -
Hello,
I have tried bringing my issue into the Adobe DPS Forum previously but have yet to recieve any kind of response. I have also phoned the Adobe helpline, but again cannot get through.
The issue I am having is within the DPS App builder. I have developed and finished my folio and have now 'created the app'. I have set up all my licenses from Apple, as well as purchasing (my now second) Adobe Single Edition license.
After I have added all the relevant details to the app builder, it doesn't let me download either the .ipa or .zip file, instead showing me the error message 'Sign in Failed, please try again'
After doing my own research online, I found that I needed to remove all symbols or hypenations from the article titles/names. I have done this. Triple checked. Re-published the folio. Completed the entire process again - but still to no avail.
As stated above, I have now purchased my second DPS Single Edition license and neither of them have worked. I really need this issue to be rectified so would appreciate a response as quickly as possible.
Thanks,
SimonMake sure your article/folio names does not contain any special characters. We were able to fix the "Sign in, please try again" error by removing all special charatcers in the folio/article names. Example of special characters are"&" "ö" "á" "()" etc
Login to your dashboard (https://digitalpublishing.acrobat.com/welcome.html) and open the folio
Click on the “List view” button to reveal the article names
Change the articles names that contains any special characters as mentioned above
Un-publish and Re-publish your folio
Download the corrected folio and re-built your app, you should be able to download fine
or PM me your login details for the dashboard and I can take a look at your articles names for you.
Maybe you are looking for
-
Right after updating my Mozilla Firefox yesterday, a screen came up asking if I wanted to update my Firefox browser. It then described benefits of the update. It did not say it would NOT import my existing Bookmarks. After downloading the new browser
-
SHA2 certificates and WebAuth with 7.4 code
Hi All, are SHA2 certificates supported on the 2504 and 5508, the reason is that I am doing WebAuth and the Certificate I got from GoDaddy was an SHA1 signed by a Root CA (GO Daddy Class 2 Certification Authority Root Certificate) that is not in the
-
Homogeneous system copy using database specific tools
My enviroment is ECC6/Oracle 10.2.0.2/Solaris 10 I'm attempting my first system copy (central instance ABAP) using database specific tools from my PRD to my QAS system in the source system I ran sapinst and proceed as follows Execution of Service SAP
-
Missing custom PARVW in E1EDKA1 INVOIC02 IDoc
We have a custom partner function type ZZ. It is on the the billing doc header. However, when we create the IDoc INVOIC02, it does not come down into E1EDKA1 with the other partner functions on the billing doc header. There are also PARVWs BK and R
-
MBP Mid 2012. Upgraded to Mavericks from Mountain Lion. The user account I was using when performing the upgrade now won't open any applications. In another user account on same computer, everything works fine. When I click on an application the desk