TS1717 Since upgrading my ipad to os7 I can no longer get my ipad to load up my music from iTunes. Same with my ipod. I have an iMac OS 10.5.8 Help desperately needed please

Can anyone help please.? Since upgrading my Ipad to OS 7 I can longer access my music on iTunes. iTunes says upgrade to version 11.1 but my IMac will not allow this. My Ipod won't upload either. Help!

You need to buy a Mac OS X 10.6 DVD, install it, and run the 10.6.8 combo updater. Mac OS X 10.6 requires a Mac with an Intel CPU and at least 1GB of RAM.
(94902)

Similar Messages

  • I have an iMac with 269 songs i would like to transfer music from my macbook with 10917 song s to the imac to free up space on the macbook without loosing my 269 song please help.

    I have an iMac with 269 songs i would like to transfer music from my macbook with 10917 song s to the imac to free up space on the macbook without loosing my 269 song please help.

    Welcome to the Apple Community.
    If both Macs are on the same network, enable homesharing, you can then import music from one to the other without affecting what's already on there.

  • I have lost my iPhone but can seem to get the find my iPhone app to work from iTunes. pease help

    I have lost my iPhone but can seem to get the find my iPhone app to work from iTunes. pease help

    much like insurgence then you need to enable my iphone before it's lost it can't be don afterwards

  • Since upgrading to iOS 6.0 I can no longer complete my connection to my co/govt email. Any thoughts?

    Cannot connect to my co/govt email since upgrade to 6.0. Anyone else have this prob?

    This comes from the iPhone Manual for iOS 6.  It applies to iPad also, but the iPad Manual for iOS 6 has not yet been released:
    VPN
    VPNs used within organizations allow you to communicate private information securely over a non-private network. You may need to configure VPN, for example, to access your work email. Ask the network’s administrator for the settings necessary to configure VPN for your network. After one or more VPN settings are defined you can:
    Turn VPN on or off: Go to Settings > VPN.
    Switch between VPNs: Go to Settings > General > VPN, then choose a configuration.
    See also Appendix A, iPhone in Business, on page 141.
    iPhone in Business
    With support for secure access to corporate networks, directories, and Microsoft Exchange, iPhone is ready to go to work. For detailed information about using iPhone in business, go to www.apple.com/iphone/business.
    Using configuration profiles
    If you’re in an enterprise environment, you may be able to set up accounts and other items on iPhone by installing a configuration profile. Configuration profiles let your administrator set up your iPhone to use the information systems at your company, school, or organization. For example, a configuration profile might set up your iPhone to access the Microsoft Exchange servers at work, so iPhone can access your Exchange email, calendars, and contacts, and it may turn on Passcode Lock to help keep the information secure.
    Your administrator may distribute configuration profiles by email, by putting them on a secure webpage, or by installing them directly on iPhone for you. Your administrator may have you install a profile that ties your iPhone to a mobile device management server, which allows your administrator to configure your settings remotely.
    Install configuration profiles: On iPhone, open the email message or download the configuration profiles from the website your administrator provides. When you open a configuration profile, installation begins.
    Important: You may be asked whether a configuration profile is trusted. If in doubt, ask your administrator before installing the configuration profile.
    You can’t change the settings defined by a configuration profile. If you want to change settings, you must first remove the configuration profile, or install a new configuration profile with the new settings.
    Remove a configuration profile: Go to Settings > General > Profile, then select the configuration profile and tap Remove.
    Removing a configuration profile deletes the settings and all other information installed by the profile.

  • Since upgrading to 3.6.13, i can no longer open tabs using the extension, only by right clicking on the open page, and then not always. I've had to go to Chrome as i can't get firefox to work.

    Firefox worked great. I have been using it for years. When i completed the recent update to 3.6.13, the new tab button/extension little + box quit working. I can click and nothing happens. I right click, get the drop down menu but nothing works. I cannot open a blank tab or windwo as when i want to go somewhere new without closing windows i have open. The only way i can access a new tab is if i go to my bookmarks and open one then use that screen to go where i wanted to go. I've had to switch to Google Chrome to complete tasks i need done online, but it doesn't let me do a lot of what i want to.

    I'll try to make this clear. I USED to be able to left click on a hyper link and the hyper link would open in a NEW tab. Now for some unknown reason the hyper link by default opens in the same tab (window). I have to right click the hyper link in order for it to open in a NEW tab. (Yes, my 'tools'> 'options'> 'tabs' are set to "open new windows in a new tab." (Please no answers telling me to get rid of the Ask toolbar because I don't have one.) Thank you.

  • Since upgrading to 5.0.1 I can no longer "search" within my AOL mail to find a specific address that I have recieved mail from

    I use ALO and like to search my old mail to bring up all the mail I have received from a particular person. Since upgrading to 5.0.1 I always get the notice that there is no match for the email that I try to search. I know this is not true. How can I get the search engine back?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Lightroom Help desperately needed please.

    Hello all Im praying someone can help me here as no one has been able to yet. I have Light room and Ive imported my pics from new york but the thumb nails along the bottom of the editor are all orange, at first they appear normal as they looked in camera and as I saw with my own eyes at the time of taking them but once imported into LR the thumbails are normal until i click 1 then they all turn orange.Its driving me mad as I cant start playing with my pics. I'll post some pics of what I mean and my colour manangement settings etc etc. Ive been told it could monitor settings, profiles etc but I have no idea what im looking for, a walk through of how fix this would be amazing thanks guys in advance

  • When I try to sync music from itunes library to my ipod touch, it says it can't sync because the connection to the iPod was lost. Please help!

    When I try syncing music from my library to my ipod, I get the message that it lost connection. My ipod is plugged in to the computer though. Does anyone know how to fix this?

    How is your iPod configured to sync music? In other words, what options and configurations do you have enabled from under your iPod's Summary and Music tabs in iTunes? 
    Maybe have a look at this article as well to verify your iPod is set up for syncing music.
    iTunes: Syncing media content to iOS devices and iPod
    B-rock

  • Since upgrading to LR 5.6 I can no longer change paper sizes for user print templates.

    The print preview window shows the new size laid out properly but the printer feeds only the size which was used to create the preset resulting in clipping if a larger paper and cell size is invoked in page setup or xs white space if a smaller is invoked. OS X 10.8.5, Stylus pro 7890. REINSTALLED PRINTERS AND DRIVERS, DELETED AND REPLACED LR PREFERENCE FILE, Other aps print ok. I

    While the problem is unsolved I have found a workaround. If I use the "Printer" button (lower far right) and print from the printer dialed pop up custom paper sizes chosen in the "page setup" are honored and the layout  prints as shown in the LR print preview). On the other hand, If I print using the "Print" button the printer feeds only the paper size chosen when creating the preset.
    Bob H

  • Since I got the latest update, I can no longer get my Upromise Toolbar.

    Last week, I downloaded the latest update for Firefox. Since then, I cannot get my Upromise toolbar to show up. I have re-downloaded the toolbar, but it still won't show up.

    Its known issue, see;
    * https://bugzilla.mozilla.org/show_bug.cgi?id=713014
    maybe fixed in nightly?
    * firefox.com/beta

  • After upgrading to Firefox 6.0 I can no longer get ANY youtube video to play. I already did the suggestion regarding my firewall.

    When I try to go on to the YouTube site I get a message from Firefox that says:
    ''''''''* * The connection has timed out
    * * The server at www.youtube.com is taking too long to respond.
    * * The site could be temporarily unavailable or too busy. Try again in a few
    * * moments.
    * * If you are unable to load any pages, check your computer's network connection.
    * * If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.''''''''
    I have already gone through the step you suggested to make sure Firefox is a trusted site with my security program, but nothing has changed.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I have a brand computer and I have an ipod nano generation 7. How do you download your music from itunes to your ipod. I did it on the old computer but am having problems with the new computer. Please help. Thanks

    Please help. I have a new computer and an ipod nano 7th generation. I am having problems getting my music from Itunes library to my ipod. How do you do it?

    Hello Sandy
    You can transfer the purchases from your iPhone to your new computer by following the steps in following article.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/ht1848
    If you have music that was not purchased from the iTunes Store, then you will not be able to move it from the iPhone to your computer. Instead you will need to follow the steps in this article that helps with moving the library from the old to the new.
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/ht4527
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Since upgrading to os 10.6, I can't drag email addresses into my address book

    Since upgrading to OS 10.6, I can no longer drag email addresses into my address book. Is there a quick way to restore this function that had worked in OS 10.4 but is apparently disabled in 10.6? Is there a work around someone figured out that's quick? I wish Apple would send out a patch to fix this problem. Any news on this front?

    James,
    Although slightly different than the problem you are having, perhaps 10.6: Change Mail's 'Copy Address' behavior - Mac OS X Hints will help with your problem.

  • Hi All, I have the latest version of iTunes, however since upgrading I can no longer get iTunes to recognise that any devices (iPhone / iPad) are connected? Can anyone help please. Paul

    Hi All, I have the latest version of iTunes, however since upgrading I can no longer get iTunes to recognise that any devices (iPhone / iPad) are connected? Can anyone help please. Paul

    Try holding down CTRL as you launch iTunes to see if it will repair the drivers.
    Or try Cerbu's post here.
    Or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
    Please let us know which approach works for you...
    tt2

  • I can no longer use my ipad to show Netflix on my TV since upgrading to ios7. I don't have Apple TV or airplay icon showing. What can I do to correct this problem?

    I can no longer use my ipad to show Netflix on my TV since upgrading to ios7. I don't have Apple TV or airplay icon showing. What can I do to correct this problem?

    This issue is with Netflix upgrade. I spoke to Netflix and here is the solution. Remove Netflix app from Ipad and reload the app version 5.0.1. This updated version will correct the problem.

Maybe you are looking for

  • Flickering on display

    Hi there is an intermittent flickering on my 15" Macbook pro retina?What can i do about it?Thank you in advance.

  • Using USB 2.0 devices

    Hi, I've got an eMac 1 GHz with Firewire but only USB 1.1. I would like to use a Miglia TV USB-key to watch numeric-TV but it doesn't want to work, because it needs USB 2.0. So one question : would it be possible to use the firewire port through an U

  • How do I burn CD from iPod?

    I keep all of my music on my iPod, and none in my Library on my computer's hard drive, to conserve space. How do I burn a CD using tracks on my iPod?

  • ADS: com.adobe.ProcessingException: Unable to create a FileDataBuffer

    Hi Experts , i am uploading the filled PDF(Adobe) form in a Zprogram  to update the table in the background. But i am getting the Error  as follows -: ADS: com.adobe.ProcessingException: Unable to create a FileDataBuffer . pls help me out with this i

  • Re: Recompose Tool

    Being new to PS Elements 9, I tried the recompose tool on my own.  It worked well and I achieved the correction in my photo.  I went to save it and noticed that the extension on the file name was changed from a .jpg to .psg  I did not know what to do