Limiting the customer to a value

Hi sd gurus,
i need a clarification for the following scenario, ex: if a customer places an order the value of the order should not be less than 5000/- rs. i should able to raise a sales order only when the value of the order is equal to or more than the amount, if the amount is less than i should get a pop-up, is their any possibility apart from user-exists. points will be rewarded, thanks in adv
mallik

Hi
In the pricing procedure can place these condition types- AMIW (Minimum sales order value) and AMIZ (Minimum value surcharge). You can levy surcharge for not creating the order for a given minimum value but cannot stop it from creation. If you donot want to get it saved, you have to take the help of the ABAPers.
Thanks,
Ravi Sankar

Similar Messages

How to Track the changes made to the custom table field value

I want to track the changes made to the custom table field value in table maintenance generator.please help me it is very urgent
Thanks & Regards,
Kranti

Hi Satya,
These are the steps you've to do.
1. Enable the change document flag in the data element level for the fields of the tables you want to monitor.
2. Go to transaction SCDO. Create a new change object, and add your table to this object. After generation, you'll get a function module.
3. Call this function module in the table maintainence generator screen, after the data is saved to the database table. This function module automaticallly writes the changes, with the old and new values, and the fields that were changed to the tables CDHDR and CDPOS.
4. You can keep track of the changes made to the table by monitoring these tables.
Regards
Anil Madhavan

Tracking the changes made to the custom table field value

Hi all,
can we track the changes made to the custom table field values. if yes..plz specify how it can be done.
Example: if i changed the value of field 'NAME' of table 'YYHCUSTOMER'. i would like to know the old value and the new value of the field. For this, I set the flag 'LOG DATA CHANGES' in the technical settings of the table 'YYHCUSTOMER'.

-> try TA: SCU3
regards Andreas

How to populate custom table field value into standard DFF

Hi Gurus
I am newbie to the OAF
I have a requirement to populate the custom table field value into standard DFF. we enabled the DFF in ReqDistDFFOnAcct(po_req_distributions_all). On the requisition tab as soon as i click on the checkout button, the custom field value has to be shown in the requisition distributions DFF field along with the standard Columns like charge account, percent, qty and when we click on the next button, it has to hit the base table ie., po_req_distributions_all.
the standard columns data is showing the screen. how to acheive this requirement programatically
There is a EO for the req distributions table. please help me how to achevie this requirement.
Any help woud be greatly appreciated.
Thank You!
Krishna

Thanks Aj. Finally i made some progress....but i am getting an error in the inst_top OPMN folder 10/10/08 15:37:14 Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declaration was not found in application.xml. I cleared the cache, bounced the webserver. Could not able to understand what is this error
Following is the code that i have written. I am not able to find out what is the error. please help me how to fix this error. there is no changes in the page and the value is not auto populating. the page is having the normal behaviour as the standard one.
Thanks in Advance for your help...
public class xxCheckoutDistsCO extends CheckoutDistsCO
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
String UnitId="";
//First get the Application Module
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject vo = (OAViewObject)am.findViewObject("PoRequisitionLinesVO");
String Reqlineid="";
String Linenum="";
String DeliverLoc="";
if(vo.first() !=null)
Reqlineid= vo.first().getAttribute("RequisitionLineId").toString();
Linenum = vo.first().getAttribute("LineNum").toString();
DeliverLoc = vo.first().getAttribute("DeliverToLocationId").toString();
// if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
// pageContext.writeDiagnostics("TEST >", Reqlineid,1);
// pageContext.writeDiagnostics("TEST >", Linenum,2);
// pageContext.writeDiagnostics("TEST >", DeliverLoc,3);
UnitId=null;
String Querry="select amli_icx_oaf_utils.get_blding_unit_id (?,?,?) from dual";
try
PreparedStatement ps=am.getOADBTransaction().getJdbcConnection().prepareStatement(Querry);
ps.setInt(1,Integer.parseInt(Reqlineid));
ps.setInt(2,Integer.parseInt(Linenum));
ps.setInt(3,Integer.parseInt(DeliverLoc));
ResultSet rs=ps.executeQuery();
// ps.execute();
// am.getOADBTransaction().commit();
while (rs.next())
System.out.println(" Query Results ");
UnitId= rs.getString(1);
System.out.println(" first > ");
rs.close();
ps.close();
catch(SQLException a)
System.out.println(" Error "+a);
System.out.println(" Second > ");
System.out.println(" Third > "); ----the program is executing upto here...it is not setting the value after this.
OAViewObject povo = (OAViewObject)am.findViewObject("PoReqDistributionsVO");
if(povo.getCurrentRow()!=null ) --------If i remove this condition i am getting the nullpointer exception in page.....
System.out.println(" Fourth > ");
povo.getCurrentRow().setAttribute("Attribute12",UnitId);
// if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
// pageContext.writeDiagnostics("TEST >", UnitId, 1);
Thanks
krishna

Routines for determine the customer tax classification in VF02

Hi
i have to find out how the customer tax classification values is coming in VF02.customer tax classification value should be '0'.but in my case it is coming '1'.
i have to find out ,how the calculations has to be done and where should i modify the value.it is an production support issue.
Please guide me .what are the possible ways to fix the issue.
Regards,
Kiran

I'm assuming that, the country is India and based on its requirement:
Sales tax is a state government revenue. There are two types of sales taxes, Local sales tax & central sales tax. Local sales tax is intra state whereas CST is inter state.
Example of LST : Point of sale i.e. delivering plant & ship to party are within the same state. The rates are defined by the respective state governments.
Example of CST : The Delivering plant & Ship to party geographic locations are 2 different states. At the point of sales from one state, the ST goes to that state govt. & consignment is despatched to the Ship to party. Once that consignment is received at the ship to party state, sales tax will be levied once the sales is registered there. For this case, the LST that is applicable by the Ship to party further will not be applicable in all probability to be captured in SAP.
Stock transfer : This does not attract any sales tax. The consignment is transferred from one D plant to another D plant irrespective of inter/intra state sales. The invoice that is accompanied with the consignment thus shall not have any final value. It's a zero value invoice, but the basic prices needed to be mentioned.
The selling organisations normally needs to register with the sales tax authority of the respective state to have a warehouse or D plant to avoid the double taxation for their dealers/distributors.
Now, the pricing procedure that is there in 4.7 is Factory sale with formula-JFACT, in which the CST condition type is JIN1 & the LST is probably JIN2. There may be surcharge cond types as well which will calculate the amount on either JIN1 or JIN2.
For config :
1.SPRO > S&D > Basic fn. > Pricing > Pricing control > Define & assign Pric. procedure > Maintain Pric proc.
2. The tax rates are normally driven from the Tax classification of Customer & Material access. To do this config, S&D >Basic fn. > Taxes. You need to include the condition type for country IN in 'Define tax determin rule'.
3. Same path : But go to Tax relevancy of master records where you configure the condition type & options of rates that will flow to these masters. One needs to understand here properly as u need to have unique combinations for picking the sales tax rates. I will try to demonstrate the smallest example. Let's say, the LST rates are 2%,4% & 0%. I will have two options for material master here. 1 for taxable & 2 for not taxable.
For customer master, I will have 1-LST 2%, 2-LST4% & 3-LST0%. When I create master records for LST thru VK11 for JIN2, I will chose the access where the combinations of customer & material tax classifications are available. If this access does not exist create it under an access sequence. But normally this is standard. The condition records will look like,
Cust-Tax classi.          Material tax claasi.        Rate           Tax code
        1                                    1                         2%               A1
        2                                    1                         4%               A1
        3                                    1                         0%               A1
Remember, rates are flown from the tax codes. Tax codes can be created thru T code FTXP. This is normally a FI job.
Hope this info helps
Regards
Manthan.

How to get the latest credit limit values per each customer in the report.

Hi All,
Can anybody give me an idea on how to get the latest credit limit values per each customer in the report.
I have below requiremnt.
I have cube which is having transactional data on document and customer level .and it also having master data info object in the cube which is credit management view having all the customer numbers .
This credit management view is master data info object having credit limit key figure as attribute.These credit limit are per each customer.
So we need these credit limits in the report as dynamic values .(I mean whatever be the current credit limit in the master data table for that paricular customer that should show up in the reporting).
one more thing these credit limits should roll up correctly at the HTR level.
One HTR having number of customers .
for example HTR 100 can have customer number 200,300,400.
Those 200,300,400 customer credit limits should roolup correctly at the HTR 100 level.
Example below :
Cube DATA :
HTR Customer Doct number Credit managment view
100 200 10001 200
100 200 10002 200
100 300 10004 300
100 300 10005 300
100 400 10006 400
100 400 10007 400
100 400 10008 400
Master data tabel (P Table)(Credit managment view)
Credit managment view Credit limits
200 1000.00
300 50000.00
400 90000.00
Please remeber :
We can not make these credit limits as navigational becasue these are keyfigure attributes not characteristics.
one more thing we can not make them as charatistics because we need use these credit limits to derive other calkculation. so it is not possibel to derive calculations on charactristics .

Create a formula variable of type replacement path with reference as attibutes of Credit management view and choose your key figure credit limit,say zcredit.
Now create a formula or CKF and use zcredit.
This should display the credit limit in your report as normal key figure.
I didnot get this part "one more thing these credit limits should roll up correctly at the HTR level.", may be the above will solve this too.Try it.
Hope this helps.

Who has changed the Custom Field value?

Dears,
Need to know the information regarding how to fetch that who has changed the Custom field value from PWA/MPP.
Example:
There is a PDP (say ProjectInfo):
There is a Custom Field added to that PDP (say Project Status = In Progress).
Now for ProjectA, someone has checked out and changed the Custom Field "Project Status" from "In Progress" to "Closed".
I need to fetch the information regarding who has changed that Custom field.
In which direction should I move: Event Handlers, PSI???? Any other stuff?
Thanks & Regards,
Shravan

Hi Shravan,
I'm not a developer but I do know that you can use an event handler pushing the resource name and date in custom fields.
Another way is to use a 3rd-party tool like
FluentPro Audit Tool.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How to get the customized value of a Report portlet in a page

Hi ,
I have a report portlet and it has a bind variable which users can customize when added to a page. There is a link to a Form page in the report , to which I need to pass the value of bind variable customized by the user. I used :
portal30.wwv_name_value.get_string( l_arg_names, l_arg_values, '<bind variable>');
function, it works ok when we run the report alone .But when we add the report as a portlet in page , it does not return any value. How do I get the customized field value in a page.
null

SAN.
I haven't tested but u can try with the below code...
OATableBean tableBean = ...;
OATableFooterBean tableFooterBean = tableBean.getFooter();
if (tableFooterBean != null)
OATotalRowBean totalRowBean = tableFooterBean.getTotal();
totalRowBean.getValue("Re-Total");
}Regards,
Gyan

How to update the Customer field value of PO Item under the Delivery Address Tab?

Hi Friends,
i tried to update the Customer field Using Bapi_PO_change.I passed the PO Order no,POADDRDELIVERY data with Item no,Adrees no,Customer no.But i am getting no data changed message from return table.I attached the screen shots.So please suggest me the helpful information for resoving this issue.
Thanks,
Dinesh

Thank you friends,
My Problem was resolved.In my case i have passed the customer value in BAPI_PO_CHANGE POITEM Table with updated customer value.
Thanks,
Dinesh

Text Data Value of the Customer Master

Dear All,
I have created a new text types for the customer as Z001 and Z004.
But now i want to create report with the customer and value maintain in those text fields. I'm little confuse how take the values. I know i have to go to the table STXH but i cant see the text value which i have entered under the text field.
Please help me to solve the above.
Thank U
Yasanga

Dear Yasanga,
As suggested by SAP2000, the usual method to read text is by using the function module 'read_text'
you have to give the text id/ object/ language etc and system will give the text assigned to the customer master.
If there is any trouble, please revert back.
Thanks & Regards,
Hegal K Charles

Urgent:-Values are not inserted into the custom table

Hi, I am inserting the data from the custom OAF form into a custom table. Only the WHO columns are populated into the table but no field value is populated into the custom table. I have written the following code -
In CO
if (pageContext.getParameter("Continue") != null)
OAApplicationModule am = pageContext.getRootApplicationModule();
OAViewObject CwkInfo = (OAViewObject)am.findViewObject("CWKInfoVO1");
am.invokeMethod("initializevo");
in AM
public void initializevo()
CWKInfoVOImpl testVo = (CWKInfoVOImpl) this.getCWKInfoVO1();
testVo.insertRow(testVo.createRow());
getTransaction().commit();
Urgent Help is required.
Regards,
Ashish

Hi Ashish,
Double check whether you have attached the correct EO based VO attribute to the columns.
In the Controller
Process Request use the following code:-
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (!pageContext.isFormSubmission())
am.invokeMethod("initQuery", null);
ProcessForm Request
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
System.out.println("Inside Process Form Request");
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (pageContext.getParameter("submitButton")!=null)
am.invokeMethod("submit")
AM Code
public void initQuery()
OAViewObject vvo = (OAViewObject)getEmployeeEOVO1();//Give you EO based VO Name
if (!vvo.isPreparedForExecution())
vvo.executeQuery();
Row row = vvo.createRow();
vvo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
public void submit()
getTransaction().commit();
Import necessage classes.
Thanks
--Anil

Profit segment the value of the customer is coming diffrent from payer

Hi,
In Billing document(VF01) , Under the profit segment the value of the customer is coming diffrent from the payer.
Would like to know how to solve this problem,
Also when I checked in the document flow, even the same value exsists in the Sales Order profit segment,
Kindly guide me how to investigate this issues.
Regards
Senthil

Hi,
In Billing document(VF01) , Under the profit segment the value of the customer is coming diffrent from the payer.
Would like to know how to solve this problem,
Also when I checked in the document flow, even the same value exsists in the Sales Order profit segment,
Kindly guide me how to investigate this issues.
Regards
Senthil

Passing values to the custom folder

Hi All
Can anyone tell me how to pass the dynamic values to the custom folder in the where condition.
I want to build a custom folder using the follwing query
select empno,ename,sal from emp where empno=10, here insted of 10 I want to pass the empno value dynamically.
Eg : select empno,ename,sal from emp where empno=<dynamic value>
I am really appreciate your help on this.
Thanks..

Hi
The simplest way to do this is as follows:
1. Create this custom folder: select empno,ename,sal from emp
2. In Discoverer Plus, you build a workbook that has a condition on the empno with a parameter asking the user which one they want to query
The workbook is then extremely flexible and it's easier than trying to add conditions or parameters to custom code.
Best wishes
Michael

Bex variable value manipulation in the customer exit

Hello Experts - I have a situation where I need to manipulate the value of a variable in the customer exit based on certain conditions. I have a customer class variable defined in the query with the processing by Manual Input/Default Value. I need to restrict the values that this variable gets based on values that are selected for another variable (division). For example if the division value is 01, class variable can not have value 'CB'. Any ideas how this can be accomplished. Any input will be appreciated.
Rgds,
Venu.

Mansi & Guy - Thanks for your input. The query is not used interactively and it is used as dashboard query in VC for which the variables are fed via Adobe Flex application. In detail here is my requirement -
Division is a mandatory field that is selected on the dashboard (You can think this for query)
Class is a Optional field (users have option to select multiple values).
If the users choose particular division (say in my case 04) and not any Class, at the query level, I want to exclude CB which I can do it in i_step3 logic.
In case if the user selects any class, I want to skip the logic of exclusion in the i_step3 (This is because, I can restrict the user what class they can pick based on the Division they choose, so the i_step3 logic wouldn't be required in this case).
Basically, I do not want to raise messages and this needs to handled based on user selections.
Appreciate your help,
Venu.
Edited by: Venu on Sep 14, 2009 10:03 PM

Custom Line Manager Data Role is limiting the Line Manager Actions

Hi
I have Created Custom Data Role on Seeded Line manager role and it is limiting the Line Manager actions (I see only Promotion and Manage Directs actions)
since i cant create a New data Role on Line Manager Abstract role. I followed these steps to do the same:
1. I have Created the 'SPS Plant Rep New' job role which inheritance the seeded 'Line Manager (HCM)'
2. i have Create the 'SPS Tulsa Plant Rep' data role with custom person Criteria (Include some locations and Exclude some Department)
3. i have assigned the 'SPS Tulsa Plant Rep' data role with person
4. ran the Retrieve process
5. Login as person who has the 'SPS Tulsa Plant Rep' data role and pick employee who meets the criteria and click on Actions, we are seeing only Promote and Manage Directs actions
but seed line Manager will have all actions like transfer, terminate, Change location, change manager.. ets but i am not seeing any of them.
my Custom Data role Suppose to restrict only people search not actions.
please refer the doc for all screenshots.
Thanks
Kranthi

Is this "On Site" or on Cloud ? The actions that you mention are they secured by function security (that is with OPSS permissions) or data security restricting access on the actions on specific data ? If this is data security and you have access to the database you potentially use the Data Security PLSQL APIs to triage what the issue is.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Limiting the customer to a value

Similar Messages

Maybe you are looking for