LIN API with C++ in MFC Application

Hi
I am using the LIN API library nicanmsc.lib and Nican.h file to work with the MFC application that I am writing in Visual C++ 6.0.
The problem i am encounter with one the API of Nican.h called "ncWrite(NCTYPE_OBJH          ObjHandle,
                           NCTYPE_UINT32        SizeofData,
                           NCTYPE_ANY_P         Data)"
As this API is used to configure the LIN Interface Slave task to configure or subscribe the data.To do that you have to have frame type is response Entry frame and one of Data Type called "Is Remote " value equal to 16. Now I am doing exactly same things to achieve configure response entry frame to send data from slave based on the ID from master. As I am able to run this API from my application and its executing correctly and sending correct information that I want to send to Master but the problem I am seeing is that when you execute any of this API it comes with STATUS back of the execution part went correctly on not based on the value that it returns. In my case eventhough the command looks to me executed correctly as sending the correct data but the STATUS comes with negative value which means it has something wrong in it. I can't figure out the problem in here.
Let me know if you any body encounter this kind of problem before. I described you the best way i can describe the problem but if any body has more question feel free to ask it.
Thanks
Chirayu

OK attached is the Error code and Message that it will print if we print the status information in String form.Its .jpeg file.let me know if you have any trouble to open the file.
Thanks
Chirayu
Attachments:
Error_LIN.jpg ‏1305 KB

Similar Messages

LIN API with C++

Hi
I am using the LIN API library nicanmsc.lib and Nican.h file to work with the MFC application that I am writing in Visual C++ 6.0.
The problem i am encounter with one the API of Nican.h called "ncWrite(NCTYPE_OBJH          ObjHandle,
                           NCTYPE_UINT32        SizeofData,
                           NCTYPE_ANY_P         Data)"
As this API is used to configure the LIN Interface Slave task to configure or subscribe the data.To do that you have to have frame type is response Entry frame and one of Data Type called "Is Remote " value equal to 16. Now I am doing exactly same things to achieve configure response entry frame to send data from slave based on the ID from master. As I am able to run this API from my application and its executing correctly and sending correct information that I want to send to Master but the problem I am seeing is that when you execute any of this API it comes with STATUS back of the execution part went correctly on not based on the value that it returns. In my case eventhough the command looks to me executed correctly as sending the correct data but the STATUS comes with negative value which means it has something wrong in it. I can't figure out the problem in here.
Let me know if you any body encounter this kind of problem before. I described you the best way i can describe the problem but if any body has more question feel free to ask it.
Thanks
Chirayu

Attached is the error message that I am getting when I am using ncWrite command .Eventhough it looks like the command is executed correctly.
I will try that Explain.exe also.
Let me know if you have any more questions.This problems looks little weird to me. I am thinking might be it has some conflict with C++ MFC Application .
Thanks
Chirayu
Attachments:
Error_LIN.jpg ‏1305 KB

Error R6034 in simple MFC Application with OCCI

Hello everyone,
I´m new to the whole occi-topic, and have a little problem.
After about 3 days of try and error and endless searching through forums I finally managed to make my first application with occi to run. It´s a Win32 console application.
After a little "celebration" I startet to create a MFC application with the same base functions.
If I compile the project, I get an error "R6034" when the compiler tries to access the file: "msvcp80d.dll". I think it has something to do with the manifests.
Here is the output.
"DBTest_MFC.exe": "D:\fh\proggen\DBTest_MFC\debug\DBTest_MFC.exe" geladen, Symbole wurden geladen.
"DBTest_MFC.exe": "C:\WINDOWS\system32\ntdll.dll" geladen, Keine Symbole geladen.
"DBTest_MFC.exe": "C:\WINDOWS\system32\kernel32.dll" geladen, Keine Symbole geladen.
"DBTest_MFC.exe": "D:\fh\proggen\DBTest_MFC\DBTest_MFC\oraocci10.dll" geladen, Keine Symbole geladen.
"DBTest_MFC.exe": "D:\oracle\product\10.2.0\client_1\BIN\oci.dll" geladen, Die Binärdaten wurden nicht mit Debuginformationen erstellt.
"DBTest_MFC.exe": "C:\WINDOWS\system32\msvcr71.dll" geladen, Keine Symbole geladen.
"DBTest_MFC.exe": "D:\fh\proggen\DBTest_MFC\DBTest_MFC\msvcr80.dll" geladen, Symbole wurden geladen.
"DBTest_MFC.exe": "C:\WINDOWS\system32\msvcrt.dll" geladen, Keine Symbole geladen.
"DBTest_MFC.exe": "D:\fh\proggen\DBTest_MFC\DBTest_MFC\msvcp80.dll" geladen, Symbole wurden geladen.
"DBTest_MFC.exe": "C:\WINDOWS\WinSxS\x86_Microsoft.VC80.DebugMFC_1fc8b3b9a1e18e3b_8.0.50727.42_x-ww_c8452471\mfc80d.dll" geladen, Symbole wurden geladen.
"DBTest_MFC.exe": "C:\WINDOWS\WinSxS\x86_Microsoft.VC80.DebugCRT_1fc8b3b9a1e18e3b_8.0.50727.42_x-ww_f75eb16c\msvcr80d.dll" geladen, Symbole wurden geladen.
"DBTest_MFC.exe": "C:\WINDOWS\system32\gdi32.dll" geladen, Keine Symbole geladen.
"DBTest_MFC.exe": "C:\WINDOWS\system32\user32.dll" geladen, Keine Symbole geladen.
"DBTest_MFC.exe": "C:\WINDOWS\system32\shlwapi.dll" geladen, Keine Symbole geladen.
"DBTest_MFC.exe": "C:\WINDOWS\system32\advapi32.dll" geladen, Keine Symbole geladen.
"DBTest_MFC.exe": "C:\WINDOWS\system32\rpcrt4.dll" geladen, Keine Symbole geladen.
"DBTest_MFC.exe": "C:\WINDOWS\system32\secur32.dll" geladen, Keine Symbole geladen.
"DBTest_MFC.exe": "C:\WINDOWS\system32\comctl32.dll" geladen, Keine Symbole geladen.
"DBTest_MFC.exe": "C:\WINDOWS\system32\oleaut32.dll" geladen, Keine Symbole geladen.
"DBTest_MFC.exe": "C:\WINDOWS\system32\ole32.dll" geladen, Keine Symbole geladen.
"DBTest_MFC.exe": "C:\WINDOWS\WinSxS\x86_Microsoft.VC80.DebugCRT_1fc8b3b9a1e18e3b_8.0.50727.42_x-ww_f75eb16c\msvcp80d.dll" geladen, Symbole wurden geladen.
Eine Ausnahme (erste Chance) bei 0x7c91eae0 in DBTest_MFC.exe: 0xC0000005: Zugriffsverletzung beim Lesen an Position 0x00000130.
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
Windows hat einen Haltepunkt in DBTest_MFC.exe ausgelöst.
Dies kann auf eine Beschädigung des Heaps zurückzuführen sein und weist auf ein Problem in DBTest_MFC.exe oder in einer der geladenen DLLs hin.
Weitere Analyseinformationen finden Sie möglicherweise im Ausgabefenster.
Is anyone familiar with this problem an perhaps able to help me?
I already tried some "workarounds" and played with the manifests, but had no success.

I assume you have the manifest tool (mt) somewhere on your system - I just open a "Visual Studio Command Prompt" when I have to use with it.
Something you can try (I'm not certain it will resolve your issue though):
1. Open a Visual Studio Command Prompt and change directories to %ORACLE_HOME%\OCI\lib\MSVC\vc8
2. Copy the existing dll files to save them:
copy oraocci10.dll oraocci10.dll.orig
copy oraocci10d.dll oraocci10d.dll.orig
3. Use the mt tool to embed the provided manifest files (you should already have these files in the directory):
mt -manifest oraocci10.dll.manifest -outputresource:oraocci10.dll;2
mt -manifest oraocci10d.dll.manifest -outputresource:oraocci10d.dll;2
NOTE: This is not an Oracle-specific procedure. The manifest tool is used by Visual Studio itself when building projects.
4. Depending on how you have your system configured, copy the oraocci10(d).dll files to a backup copy as before in whatever directories you have them and then copy the "new" files with the embedded manifest to those locations.
For example, on my development machine, I have copied the files to %ORACLE_HOME%\bin so that I do not have to include %ORACLE_HOME%\OCI\lib\MSVC\vc8 in my path.
Let us know if that helps or not!
- Mark

How to Integrate OIM API with the Application in NetBeans

Hi All,
I'm Facing problems to Integrate OIM API with the Application. I'm using Netbeans IDE. Can anyone please let me know the steps to do so?? any documents will also help me.
Thanks

Hey,
Helpful links for you:
1- http://www.youtube.com/watch?v=Yccl0HqfA3o
2- http://www.youtube.com/watch?v=ZdMTLRF7P_4
Let me know if it helps you. I hope so.
Thiago Leoncio Guimaraes

How do I set the FireFox browser to be compatible with my Brother MFC-8840D printer so it will translate color into grayscale when printing from a webpage?

Hi, I have a question about setting the FireFox browser so it is compatible with my Brother MFC-8840D printer to print in grayscale. Currently, if I print anything in color, like a Google Map, the colored parts of the map show up blank, whereas the color should change to grayscale in a black/white laser printer. Brother tech support told me to contact Mozilla about this issue.
In comparison, when I print a Google Map on my dad's HP printer (also using FireFox browser), the color map prints perfectly in grayscale, so I can see all of the street lines.

The Firefox 3.5.x branch has reached end-of-life and is no longer maintained.<br />
You will no longer receive security updates.<br />
You can update Firefox via "Help > Check for Updates" or download and install the latest Firefox 3.6.x.<br />
Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Adding local variable using mfc-application

Hi.
I’m looking for a way to add a local variable to a TestStand-Sequencefile (not while the sequence is running) – out of a MFC-application. It’s not the first time this question is asked – I know. But I’m not able to get the other solutions running.
Thought it should work like this:
Step SequenceStep;
TS:ropertyObjectPtr property;
disPtr = tsEngine.NewStep(TS_SequenceAdapterKeyName, TS_StepType_SequenceCall);
SequenceStep.AttachDispatch(disPtr);
SequenceStep.SetName("Sequence");
//add a local variable to the new created sequence
property = SequenceStep.AsPropertyObject();
property->SetValString("Locals.VarToInsert", 1, "Str");
In TestStand I’m not able to see the
new variable – but in the Sequencefile the following lines were added:
[SF.Seq[0].Main[2].Locals]
VarToInsert = "Str"
After changing the lines to:
[DEF, SF.Seq[1].Locals]
VarToInsert = Str
everything works fine. Any suggestions what’s wrong with my program?
Thanks!

I’ve found a solution (example in the TestStand-folder) for this problem.

RCConsole MFC application error

When I use ZfD Remote Controle v6.5 (via DSRazor or command prompt), I get
the error message "RCConsole MFC Application has encountered a problem and
needs to close. It seems that when I use C1 the error does not occur.
The remote machine gets the request to "accept" the remote control
connection, but as soon as "accept" is clicked, the machine that initiated
the remote connection gets the error.
Error signature:
applic name : rconsole.exe
appver: 6.5.2.0
modname: zrmresld.dll
modver: 6.5.1.0 (strange that this is not 6.5.2)
I have the latest Novell Client - 4.91.2 and I'm running ZfD Agents 6.5.20.
Can someone help? Thanks.

RCConsole is NOT designed for using it from the command prompt, but on 5 Jan
2006 this article was posted on the Novell CoolSolutions.
Total confusion or Novell at its best? :-(
> cool solutions home
Using RCConsole as a replacement for Wviewnt
Novell Cool Solutions: Tip
By Adam HobbsRate This Page
Reader Rating from 0 ratings
Printer Friendlytell a friendPosted: 5 Jan 2006
ENVIRONMENT:
ZENworks for Desktops 6.5
ConsoleOne 1.3.6PROBLEM: Under ZENworks for Desktops 3.2 (and previous
versions) we used to use Wviewnt.exe to remote control machines from the
command line outside of ConsoleOne. This was very handy for
remote-controlling regularly controlled machines, such as licence servers,
card swipe machines etc.
However wviewnt.exe does not seem to work with ZENworks for desktops 6.5.
TID 10023508 does not include information for using this with ZENworks 6.5
SOLUTION: Use RCConsole.exe from ConsoleOne 1.3.6 (in ...
ConsoleOne\1.2\bin\zen\RCLaunch\ ) as a replacement for wviewnt.exe.
"Shaun Pond" <[email protected]> wrote in message
news:[email protected]..
> Lelieg,
>
> you know that rcconsole isn't designed to be used from the command line?
> desktop4
> http://www.novell.com/documentation/...i.html#af7z6oi
> is the supported option for that
>
> --
>
> Shaun Pond
>
>

How to use the crypto api with gemalto cyberflex 32k ?

Hello ,
I've done many javacard programs using this method :
_compilation with javacard kit 2.2.1
_convertion into ".cap" with the javacard kit 2.1.2
All this programs work fine with this method : helloworld, read, write in the card, ....
But when i want to use the crypto api, i can't charge the program in the card (just by adding 2 lines for generating keys):
----------> returns 0x80206A80 (6A80: Wrong data / Incorrect values i data.)
I think it's because i use the 2.1.2 version , but if i use the 2.2.1 to convert , it's another error and no program work with this method.....even helloworld doesn't work...
-----------> returns 0x80206985 (6985: Command not allowed - Conditions of use not satisfied.)
I thing i must change my gpshel command , but i have read many forums but can't find the configuration for my card cyberflex 32k, some people had similar problems so they used the kit 2.1.2 combined with 2.2.1 like me, but i think they can't use the crypto api with this.........
Any help will be apreciated,
kind regards
Franck
Edited by: jojo85 on Mar 20, 2009 11:03 AM

Hello,
Thanks Sonnyyu,
I deleted my gpshell 1.4.2 directory and i installed gpshell 1.4.0 instead like they said , to avoid some bugs
i've tested the exemple CardEdgeII.ijc ,
here's what i got:
mode_201
enable_trace
establish_context
card_connect -readerNumber 1
select -AID a0000000030000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f
delete -AID A0000003230101
delete -AID A00000032301
delete -AID A00000000101
delete -AID A000000001mode_201
enable_trace
establish_context
card_connect -readerNumber 1
select -AID a0000000030000
Command --> 00A4040007A0000000030000
Wrapped command --> 00A4040007A0000000030000
Response <-- 6F188407A0000000030000A50D9F6E060011020201009F6501FF9000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f
Command --> 8050000008674672AE4B85E01800
Wrapped command --> 8050000008674672AE4B85E01800
Response <-- 000081410002B2C600E4010151982BB4CF843B1431E57DB6418652AE9000
Command --> 848201001073CF9B92B3F11E10BE12D1318E9A8095
Wrapped command --> 848201001073CF9B92B3F11E10BE12D1318E9A8095
Response <-- 9000
delete -AID A0000003230101
Command --> 80E40000094F07A000000323010100
Wrapped command --> 84E40000114F07A000000323010149D51E784E07966B00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID A00000032301
Command --> 80E40000084F06A0000003230100
Wrapped command --> 84E40000104F06A00000032301E3788AF4A9E32C2100
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID A00000000101
Command --> 80E40000084F06A0000000010100
Wrapped command --> 84E40000104F06A00000000101C3CC96E6E54AF0ED00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID A000000001
Command --> 80E40000074F05A00000000100
Wrapped command --> 84E400000F4F05A000000001DA73D168B218692C00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
install -file CardEdgeII.ijc -nvDataLimit 12000 -instParam 00 -priv 2
install -file CardEdgeII.ijc -nvDataLimit 12000 -instParam 00 -priv 2
Command --> 80E602001705A00000000107A00000000300000006EF04C60231000000
Wrapped command --> 84E602001F05A00000000107A00000000300000006EF04C60231000019F52839EB52A80200
Response <-- 009000
Command --> 80E80000EFC48230F401000FDECAFFED010204000105A00000000102001F000F001F000A00290256006C2307000A04230000067F00060000000004010004002904000107A0000000620101010107A0000000620102010107A0000000620201000107A000000062000103000A0106A0000000010119CE06006C00800313000C040400051856FFFF1BA41A2A17FB1818183718A61971008300020001011100001E4F1EC51F771F9A1FA71FAC1FB31FBC1FCD1FF41FFD20082043204B205520662071008300030001010D0000209520B520C520D52101211C21742196221F2230226F227D22E1072307000640188C00861803880010
Wrapped command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
Response <-- 9000
Command --> 80E80001EF08900B7F001C7B001C03104D387B001C041075387B001C051073387B001C061063387B001C07106C387B001C081065387B001C10061030387B001C1007103038187B001C037B001C925B8C004D6108119CFF8D005318100891008087011810089100808702AD02038F00803D0610108C002037AD020324940000807B001C037B001C925B8B002A7A05361A0525321A062529071F62071F10086C08119C108D00531607610EAD021F24940000802804700CAD011F2494000080280415046708119C108D0053031A07258D002E2905198B003016056A081167008D00531605076D08119C0F8D00531A08252906160504
Wrapped command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
Response <-- 9000
°
°
°
there are again many lines and the response is always 9000
i'll try to find a converter to convert the .cap files of my crypto application into .ijc files
thanks,
kind regards
Franck
Edited by: jojo85 on Mar 21, 2009 2:48 PM

How to delete string or line from unix file(dataset) of application server

Hi All,
After transfer workarea information or all records into dataset(unix file). When I see the file in application server automatically the last line is shown a blank line. I am not passing any blank line.
I have tried for single record than also the file generates the last line(2nd line) also a blank line.
When I m reading the dataset, it is not reading the last blank line but why it is showing the last blank line?
How to delete string or line from unix file(dataset) of application server?
Please give your comments to resolve this.
Thanks
Tirumula Rao Chinni

Hi Rio,
I faced similar kind of issue working with files on UNIX platform.
The line is a line feed to remove it use
DATA : lv_carr_linefd TYPE abap_cr_lf VALUE cl_abap_char_utilities=>cr_lf.
DATA : lv_carr_return TYPE char1,
         lv_line_feed   TYPE char1.
lv_line_feed   = lv_carr_linefd(1).
lv_carr_return = lv_carr_linefd+1(1).
Note: IMP: The character in ' ' is not space but is a special
character set by pressing ALT and +255 simultaneosly
REPLACE ALL OCCURRENCES OF lv_line_feed IN l_string WITH ' '.
REPLACE ALL OCCURRENCES OF lv_carr_return IN l_string WITH ' '.

Problem with layout in Web Application Designer

Hi all,
I am working with the BEx Web Application Designer. Well, I execute a web template in the browser, click on right button and choose enhanced menu, query properties and mark the check box Display Rows as Hierarchy and Expand to and from the list of values (combo-box) choose the last field that can be expanded.
Once all the lines have been expanded and the layout of the template is longer than a page, we look for a line that is not in the first page and contract it. The problem is that when we contract the line, the layout shows the first page, instead of the page where the line had been contracted. I have tried to solve this changing the properties that appear when the template is designed, but I haven´t found the solution. Is there any way so that i can solve it?
Thanks in advance,
Mª del Mar Bonilla.

Bonilla,
Welcome to SDN...
Try this out...
In the Query designer view , right click on the rows structure and select display as hierarchy. In case this option works fine , the behavior pointed out by you could be a possible bug.
Just update the result of what I have mentioned above...
Hope it helps..
Arun
P.S Assigning points is a way fo saying thank you in SDN

Implementing SQL Server Reporting Services with a Java EE Application

Hi All,
I need to find some tutorial on
"Implementing SQL Server Reporting Services with a Java EE Application"
for my j2EE application.
Until now i have searched a lot of sites but have not any thing related to this topic.
I am using apache axis along with SQL Server Report Manager for creating the sql server reports.
I have done upto :
Creating the webservice with the help of report manager.
Now i want to connect it through my j2EE application and want to retrieve some data from that web service.
I have got stuck on the following BOLD lines in my code .
code:
public CatalogItem[] getData(String res, String searchStr) throws RemoteException     {
              ReportingService2005Soap port = null;
              ReportingService2005Locator loc = new ReportingService2005Locator();
              // Retrieve a port from the service locator
              try {
                   port = loc.getReportingService2005Soap(new java.net.URL(res));
              } catch (MalformedURLException e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
              } catch (ServiceException e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
              org.apache.axis.client.Stub stub = (org.apache.axis.client.Stub) port;
              stub.setUsername("localhost\\Administrator");
              stub.setPassword("servWIN@2007");
              // Retrieve a port from the service locator
              SearchCondition condition = new SearchCondition();
              condition.setCondition(ConditionEnum.Contains);
              condition.setName("Name");
              if (searchStr != null)
              condition.setValue(searchStr);
              else
              condition.setValue("");
    //           Create an array of SearchConditions which will contain our single search condition
              SearchCondition[] conditions;
              conditions = new SearchCondition[1];
              conditions[0] = condition;
    //           Call the Web service with the appropriate CatalogItem[] returnedItems;
              CatalogItem[] returnedItems = null;
              port.findItems("foldername",BooleanOperatorEnum.Or, conditions);
              return returnedItems;
         }i.e. while executing the findItems() method i got the following exception :
System.Web.Services.Protocols.SoapException: The item '/reportingservices' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/reportingservices' cannot be found.
at Microsoft.ReportingServices.Library.RSService.FindItems(String folder, String operation, SearchCondition[] properties)
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions, CatalogItem[]& Items)
Any any body has any idea please help me.
I need it urgently.
Regards.

The above example is mentioned in msdn virtual lab that teaches how to connect to reporting services from a j2ee application.
I have done the same thing .. but i am not able to render the report programmatically .. if anybody knows pls let me know the solution.

Line chart with more than 15 data series - color problem

Hi all,
I've built a line chart with 32 data series (user can control, which of them are displayed at a time). For series 16 to 32 I did manipulate the URL in the browser directly, because Application Express does only display parametrs for up to 15 series. This works fine so far except of displaying the colors. For each sieries I defined a different color. 29 of my 32 series are displayed in the desired color. But series 29, 31 and 32 are displayed in a default-color (#0099CC). It seems that this is a SVG-problem. In the SVG-source I find the wrong color. When I export my application, I see the right color.
Thanks for help,
Chris

Hello,
Which version of APEX are you using?
Go to your Flash Chart attributes - get into your series (click the icon) in the section of Series Query you'll find the maximum rows.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

Line Chart with more than 15 datapoints

I'm using Apex 3.1.
I am trying to create a line chart with more than 15 data points. Apparently 15 is the default. Question is, How do I change the default?
The Wiki has advice for changing the "Maximum Rows" parameter, but "Maximum Rows" is not to be found, either in the chart attributes or series attributes.
http://wiki.shellprompt.net/bin/view/Apex/ChartIssues
I have encountered this limitation with SVG line charts and Flash line and scatter charts. Seems like it must be an easy thing to figure out; I feel embarassed asking such a question. But I've been through all the application property pages, much of the documentation, and several tutorials... Where can I change this? It's driving me nuts!
Thanks
Fred

Hello,
Which version of APEX are you using?
Go to your Flash Chart attributes - get into your series (click the icon) in the section of Series Query you'll find the maximum rows.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

Not found error message from LabVIEW runtime when called from VC++ with statically linked MFC

I have a dll built using LabVIEW 6i. I am calling the dll from a VC++ application. When the application loads I get an error pop-up 'cannot find LabVIEW runtime'. If I change the VC++ code to dynamically load MFC (using the loadlibrary function) or dynamically load the LabVIEW dll I created then the problem goes away. Only when both are loaded statically do I get the error message.
The target machine is running Win2K pro and has the LabVIEW runtime installed.
I do not want do dynamic loads as I need to call the dll from a legacy application. Are there any options to change the way LV links to MFC or to force the dll to find the LV runtime?
Alan Widmer

Ben,
I have attached a ZIP of the files required to test a DLL from an MFC application. Or you can build the same application by following the instructions below. I used the numtest dll that you previously sent to me so there is no 'magic' in the LabVIEW or dll.
In VC++ select NEW. Pick the MFC AppWizard (MFC) to build an MFC application. In the wizard select
Project Name: MFCNumtest
Single Document
No database support
No Compound document support
Support for ActiveX
Default settings on the Features page
MFC Standard
MFC as a shared DLL
From the ResourceView of the project explorer, add an item Test to the IDR_MAINFRAME menu then add an item Go as a submenu item (with an ID of ID_TEST_GO)
Right click the new menu item and run the Class
Wizard. Click Add Function.. button to make a function OnTestGo()
Open MainFrm.cpp and scroll to the end of the file to see the skeleton for the OnTestGo function. In this function add a call to the LabVIEW dll. You will also need to add a reference to the .lib file and the usual extcode.h.
When you run the app you will see a window with the Test menu item. Select it and click Go to run the call to LabVIEW.
This all works great. If you now go to Project | Settings and on the general tab change the Microsoft Foundation Classes: item from 'Use MFC in a shared DLL' to 'Use MFC in a static library' rebuild ALL files in the project and run the app you get the error message:
System error 998 while loading the LabVIEW Run-Time Engine (C:\Program Files\National Instruments\shared\LabVIEW Run-Time\6.0\\lvrt.dll).
numtest requires a version 6.0 (or compatible) LabVIEW Run-Time Engine. Please contact the vendor of numtest to correct this problem.
I apologies for my slow response, g
ot distracted by some other issues.
Thanks for your help,
Alan Widmer.
Attachments:
mfcnumtest.zip ‏44 KB

ColdFusion compatibility with Sun Java System Application Server

Background: A vendor that is doing a project for our
department told us that ColdFusion MX 6.1 is not compatible with
Sun Java System Application Server Enterprise Edition 8.1 and
beyond. Since we are migrating our server environment to this
release of Sun Java System Application Server Enterprise Edition,
we face a difficult situation in that our ColdFusion applications
will no longer run. Thus, we would like Adobe to answer a couple
questions which will help us determine what course of action we
ought to take.
Q: Will applications we developed using ColdFusion MX 6.1 run
on Sun Java System Application Server Enterprise Edition 8.1? Below
is a detailed description of the Sun Java System Application Server
Enterprise Edition we intend to migrate to.
Q: Is Adobe aware of any compatibility issues with this
configuration?
Q: What is Adobe's support commitment regarding future
releases of ColdFusion MX and Sun Java System Application Server
Enterprise Edition? Does Adobe intend to continue support this
environment?
Configuration: Sun Java System Application Server Enterprise
Edition 8.1_02 (build b24-p11)
Below is the specification levels for the 8.1 server
(J2EE1.4), note it can use J2SE 1.4.2_06 or 5.0 as the JAVA
runtime.
J2EE 1.4 compatible
Components: J2SE 1.4.2_06 or J2SE 5.0
Application and Application Client
Enterprise JavaBeans (EJB) 2.1
Java Servlet 2.4
JavaServer Pages(JSP) 2.0
J2EE Connector Architecture 1.5
JMX 1.2
JMS 1.1
Java Naming and Directory Interface (JNDI) 1.2
and Java Transaction API (JTA) 1.0
Web Services:Java Web Services Developer Pack 1.5
Java APIs for XML Registries (JAXR) 1.0
Java API for XML-based Remote Procedure Calls (JAX-RPC) 1.1
SOAP With Attachments API for Java (SAAJ) 1.2
WS-I Basic Profile 1.0
Other:J2EE Deployment 1.1
J2EE Management 1.0
Java API for XML Processing (JAXP) 1.2
JavaMail 1.3
Java Authentication and Authorization Service (JAAS) 1.0
Java Authorization Contract for Containers (JACC) 1.0

First of all, is there a reason why you are using jRockit?
Since the issue appeared after upgrading the windows, the issue would potentially be in the interaction between JVM and OS.
Also, there were some issues related to memory leak that were fixed in AS 8.2.
May be you should try with a Sun JVM and AS 8.2.

LIN API with C++ in MFC Application

Similar Messages

Maybe you are looking for