LIN API with C++

Hi
I am using the LIN API library nicanmsc.lib and Nican.h file to work with the MFC application that I am writing in Visual C++ 6.0.
The problem i am encounter with one the API of Nican.h  called  "ncWrite(NCTYPE_OBJH          ObjHandle,
                           NCTYPE_UINT32        SizeofData,
                           NCTYPE_ANY_P         Data)"
As this API is used to configure the LIN Interface Slave task to configure or subscribe the data.To do that you have to have frame type is response Entry frame and  one of Data Type called "Is Remote " value equal to 16. Now I am doing exactly same things to achieve configure response entry frame to send data from slave based on the ID from master. As I am able to run this API from my application and its executing correctly and sending correct information that I want to send to Master but the problem I am seeing is that when you execute any of this API it comes with STATUS  back of the execution part went correctly on not based on the value that it returns. In my case eventhough the command looks to me executed correctly as sending the correct data but the STATUS comes with negative value which means it has something wrong in it. I can't figure out the problem in here.
Let me know if you any body encounter this kind of problem before. I described you the best way i can describe the problem but if any body has more question feel free to ask it.
Thanks
Chirayu

Attached is the error message that I am getting when I am using ncWrite command .Eventhough it looks like the command is executed correctly.
I will try that Explain.exe also.
Let me know if you have any more questions.This problems looks little weird to me. I am thinking might be it has some conflict with C++ MFC Application .
Thanks
Chirayu
Attachments:
Error_LIN.jpg ‏1305 KB

Similar Messages

  • LIN API with C++ in MFC Application

    Hi
    I am using the LIN API library nicanmsc.lib and Nican.h file to work with the MFC application that I am writing in Visual C++ 6.0.
    The problem i am encounter with one the API of Nican.h  called  "ncWrite(NCTYPE_OBJH          ObjHandle,
                               NCTYPE_UINT32        SizeofData,
                               NCTYPE_ANY_P         Data)"
    As this API is used to configure the LIN Interface Slave task to configure or subscribe the data.To do that you have to have frame type is response Entry frame and  one of Data Type called "Is Remote " value equal to 16. Now I am doing exactly same things to achieve configure response entry frame to send data from slave based on the ID from master. As I am able to run this API from my application and its executing correctly and sending correct information that I want to send to Master but the problem I am seeing is that when you execute any of this API it comes with STATUS  back of the execution part went correctly on not based on the value that it returns. In my case eventhough the command looks to me executed correctly as sending the correct data but the STATUS comes with negative value which means it has something wrong in it. I can't figure out the problem in here.
    Let me know if you any body encounter this kind of problem before. I described you the best way i can describe the problem but if any body has more question feel free to ask it.
    Thanks
    Chirayu

    OK attached is the Error code and Message that it will print if we print the status information in String form.Its .jpeg  file.let me know if you have any trouble to open the file.
    Thanks
    Chirayu
    Attachments:
    Error_LIN.jpg ‏1305 KB

  • Source code doesn't seem to line up with the compiled classes in ECLIPSE

    I am trying to write a Tomcat servlet to parse an incoming message, however when I parse the message to get the parts out of it I get a a parse error that doesn't really tell me a lot.
    I have downloaded the source code for the Java Mail API 1.3.2 and attached it to the jar file in Eclipse.
    However when I debug the code and step through it I get two problems. 1) I get a warning that I can't see the local variables (not really a great problem). 2) The lines in the source code do not line up with where the stack says I am.
    I have checked the dates on the various classes and the source of the API and they seem to line up.
    I did try to recompile the classes just as an experiment but I am runing JDK_1.4.2_06 and the source seems to be set up for 1.5 and I have some missing classes. I can't switch to 1.5 because there are some other servlets running on this server that won't work on 1.5.
    Can anyone give me a clue how I can at least get the the correct line number.
    Thanks
    Brynn

    Has anyone any ideas on this please?

  • How to use the crypto api with gemalto cyberflex 32k ?

    Hello ,
    I've done many javacard programs using this method :
    _compilation with javacard kit 2.2.1
    _convertion into ".cap"  with the javacard kit 2.1.2
    All this programs work fine with this method : helloworld, read, write in the card, ....
    But when i want to use the crypto api, i can't charge the program in the card (just by adding 2 lines for generating keys):
    ----------> returns 0x80206A80 (6A80: Wrong data / Incorrect values i data.)
    I think it's because i use the 2.1.2 version , but if i use the 2.2.1 to convert , it's another error and no program work with this method.....even helloworld doesn't work...
    -----------> returns 0x80206985 (6985: Command not allowed - Conditions of use not satisfied.)
    I thing i must change my gpshel command , but i have read many forums but can't find the configuration for my card cyberflex 32k, some people had similar problems so they used the kit 2.1.2 combined with 2.2.1 like me, but i think they can't use the crypto api with this.........
    Any help will be apreciated,
    kind regards
    Franck
    Edited by: jojo85 on Mar 20, 2009 11:03 AM

    Hello,
    Thanks Sonnyyu,
    I deleted my gpshell 1.4.2 directory and i installed gpshell 1.4.0 instead like they said , to avoid some bugs
    i've tested the exemple CardEdgeII.ijc ,
    here's what i got:
    mode_201
    enable_trace
    establish_context
    card_connect -readerNumber 1
    select -AID a0000000030000
    open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f
    delete -AID A0000003230101
    delete -AID A00000032301
    delete -AID A00000000101
    delete -AID A000000001mode_201
    enable_trace
    establish_context
    card_connect -readerNumber 1
    select -AID a0000000030000
    Command --> 00A4040007A0000000030000
    Wrapped command --> 00A4040007A0000000030000
    Response <-- 6F188407A0000000030000A50D9F6E060011020201009F6501FF9000
    open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f
    Command --> 8050000008674672AE4B85E01800
    Wrapped command --> 8050000008674672AE4B85E01800
    Response <-- 000081410002B2C600E4010151982BB4CF843B1431E57DB6418652AE9000
    Command --> 848201001073CF9B92B3F11E10BE12D1318E9A8095
    Wrapped command --> 848201001073CF9B92B3F11E10BE12D1318E9A8095
    Response <-- 9000
    delete -AID A0000003230101
    Command --> 80E40000094F07A000000323010100
    Wrapped command --> 84E40000114F07A000000323010149D51E784E07966B00
    Response <-- 6A88
    delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
    delete -AID A00000032301
    Command --> 80E40000084F06A0000003230100
    Wrapped command --> 84E40000104F06A00000032301E3788AF4A9E32C2100
    Response <-- 6A88
    delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
    delete -AID A00000000101
    Command --> 80E40000084F06A0000000010100
    Wrapped command --> 84E40000104F06A00000000101C3CC96E6E54AF0ED00
    Response <-- 6A88
    delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
    delete -AID A000000001
    Command --> 80E40000074F05A00000000100
    Wrapped command --> 84E400000F4F05A000000001DA73D168B218692C00
    Response <-- 6A88
    delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
    install -file CardEdgeII.ijc -nvDataLimit 12000 -instParam 00 -priv 2
    install -file CardEdgeII.ijc -nvDataLimit 12000 -instParam 00 -priv 2
    Command --> 80E602001705A00000000107A00000000300000006EF04C60231000000
    Wrapped command --> 84E602001F05A00000000107A00000000300000006EF04C60231000019F52839EB52A80200
    Response <-- 009000
    Command --> 80E80000EFC48230F401000FDECAFFED010204000105A00000000102001F000F001F000A00290256006C2307000A04230000067F00060000000004010004002904000107A0000000620101010107A0000000620102010107A0000000620201000107A000000062000103000A0106A0000000010119CE06006C00800313000C040400051856FFFF1BA41A2A17FB1818183718A61971008300020001011100001E4F1EC51F771F9A1FA71FAC1FB31FBC1FCD1FF41FFD20082043204B205520662071008300030001010D0000209520B520C520D52101211C21742196221F2230226F227D22E1072307000640188C00861803880010
    Wrapped command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
    Response <-- 9000
    Command --> 80E80001EF08900B7F001C7B001C03104D387B001C041075387B001C051073387B001C061063387B001C07106C387B001C081065387B001C10061030387B001C1007103038187B001C037B001C925B8C004D6108119CFF8D005318100891008087011810089100808702AD02038F00803D0610108C002037AD020324940000807B001C037B001C925B8B002A7A05361A0525321A062529071F62071F10086C08119C108D00531607610EAD021F24940000802804700CAD011F2494000080280415046708119C108D0053031A07258D002E2905198B003016056A081167008D00531605076D08119C0F8D00531A08252906160504
    Wrapped command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
    Response <-- 9000
    °
    °
    °
    there are again many lines and the response is always 9000
    i'll try to find a converter to convert the .cap files of my crypto application into .ijc files
    thanks,
    kind regards
    Franck
    Edited by: jojo85 on Mar 21, 2009 2:48 PM

  • Vendor Line item with Opening and Closing Balances report regarding

    Dear All,
    I need a report for vendor line items with Opening and Closing balances.
    Thanks in advance
    Sateesh

    Hi
    Try S_ALR_87012082 - Vendor Balances in Local Currency
    Regards
    Sanil Bhandari

  • Customer line items with balance carry forward no opening balance

    Hello FI Experts,
    We have ticket where the user is using a Z* Report for Customer line items with balance carry forward. In 31.01.2007 user has posted some legacy data, latter he was executing this Z* report then user can see the values posted on the same day (31.01.2007) as line items. But he was executing the report on 01.02.2007 then he was not able to see the line item as well as the values posted on 31.01.2007 as opening balance as on 01.02.2007. But if we run the report as on 01.01.2008 then we are able to see the values which are carry forwarded as opening balances. Did anyone have worked on this type of scenario?
    Requirement Here Is:  The values that have been posted on 31.03.2007 which are still open line items should get displayed as opening balance as on 01.02.2007.
    Thanks for helping on this issue.

    Hi,
      Any report will get data from Tables. Please check whether the table you have used to develop this report has opening balance.
    Balance will be carry forwarded only when you run the balance carry forward program. Check whether this was run for the date you have specified. This can be done in the year end.
    If you are checking in the middle of the year, then the balance will not be carry forwarded.
    Regards,
    B. Radhika.

  • Report for G/L line items with both debit & credit posting accounts

    Hi,
       My client requires a G/L line items report. It can be possible thru fs10n or fbl3n etc. But he wants to see both the credit and debit accounts in the same line.
    for ex: if I open a expense account and show the report of individual documents, he wants to see the corresponding credit item to which bank/cash account it got credited to.
    we showed them to double click on that document and goto document overview. but they dont want in that way.
    they want to see all the line items with both postings in the same sheet for all line items.
    valuable replies will be fairly rewarded.
    thanks,
    chaitanya

    Hi,
    U can use the following TCodes...
    - S_ALR_87012287
    - S_ALR_87012289
    - S_ALR_87012291
    But i am not sure if your client will be happy...
    This is a very common req and the only solution possible is to have a customized report for the client..
    Hope its clear..
    Cheers
    Raghu

  • Unable to delete line item with 0 quantity in Invoice.

    Hi Experts,
    I came across a Invoice which reflects in VF04 as pending Billing due list. When i checked at the inter company Invoice i came across a line item with "0" quantity and price as zero, interestingly the replinishment cross company delivery document  for the same line item for "0" quantity had a Batch assigned to it.
    Now the issue is cusotmer has selected the line item with XX quantity and have selected the accounting document to be generated but the line item with "0 was left over and now still reflects in VF04.
    Customer does not want to reverse the full cycle to resolve the issue since the document was created a year back.My Question  is can we get the line item with "0" quantity to clear accounting so that it will not reflect in VF04.If so what will be process to do that.
    Thanks in Advance to advice.
    Regards,
    Sridhar.R

    Hi,
    It is  not possible to delete this line item, you can discuss with your client and delete it from the table.
    And now coming to the reasons why it has come into the invoice & Delivery
    1. The Batch Item category must have been configured as relevant for billing...check this and make it irrelevant if the client does not do batch specific billing. --- This will stop the batches from coming into the invoice.
    2.  Check for the batch item category in delivery if Zero quanity is allowed...if it is allowed make it not allowed and make it an Error message, whenever there is a zero quantity system will give a message.

  • Line Layout with Reference Key in F-03

    Dear all,
    Iu2019m facing the following problem.
    I modified the line layouts for F-03 through O7Z4S. In particular I created a line layouts with the field Reference key 1. The problem is that in F-03, using this variant, the field XREF1 appeared always blank. The same thing happens for XREF2 while for XREF3  everthing is ok.
    Is something that I forgot in customizing?
    Thanks in advance

    Dear Alberto,
    I created the same - Reference Key in IDES it works if you create with text and then insert Reference key as part of Field with this.
    Hope this would surely help...
    Deven.

  • PO Line Item with Open Quantity

    HI all,
    How should i select a PO line item with Open Quantity? Is it possible to post GR for a PO which is set for Delivery Complition but still has Open Quantity ..
    please help me how to check for OPEN QUANTITY.
    Thanks,
    Ravi.

    Hi all,
    Thanks for your answer, but can you be some more specific on what calculations need to be done.
    I need to Post a GR for all PO where PO line items have Open Quantity.
    Thanks
    ravi.

  • How to pull PO line item with "Block" indicator

    Hi all
    In ME2N, how do I pull all the PO line items with the "block" indicator set?
    I couldn't find a field in dynamic selection.
    Thanks in advance!

    HI,
    1. In ME2N -
    >Go to EDIT menu and then select Dynamic Selections (Shift+F4).
    Next select Purchasing Document item and double click on deletion indicator.
    Select the indicator and excute.
    Hope it helps..
    regards

  • How can i set up mac mail so each line starts with a capital letter?

    how can i set up mac mail so each line starts with a capital letter? 

    I am pretty sure that this is not an option within Apple Mail.

  • How to limit data range in a Line chart with Time Refresh Control

    Hi All,
    I have a Line chart with Time Refresh Control and I would like to make some constraints to this navigation.
    For example, I would like to limit the user to navigate in a data range of 8 hours.
    Is this posible?
    Thanks in advance

    Hi Pedro,
    as far as I know, this is not possible using the time controls on an iChart. However, you may have some success by using your own time controls which call JavaScript methods exposed by the applet.
    For example, you could begin by hiding the time and calendar buttons on an iChart, and creating some buttons of your own. For instance, to set the start date of a query (and thus the start date of the iChart using the query), you can use the following:
    document.getElementById("appletID").getQueryObject().setStartDate(<date string>);
    Using code like the above (look into the xMII script assistant and documentation), you should be able to build time controls which satisfy your requirements. The exact format of <date string> in the sample above will depend on the date format defined in the query template this script calls.
    Hope this helps,
    Sascha

  • Renew, DPS, how can I renew my DPS account on line paying with my credit card

    Hi, how can I renew my DPS account on line, paying with my credit card?
    Many Thanks

    Hi Neil,
    I appreciate you help, however I have some questions:
    This is my Customer ID from our DPS Console:1457082
    My account: [email protected]
    I can not find the new experation date, it still shows 07/08/2014
    I am worried because of this , I don’t want to stay with a service, please help me with this situation

  • Error occurred while finding users using API with custom field

    Hi All,
    I am getting the following error while searching user using API with custom attribute. Did anybody faced the same problem before ?
    Hashtable<Object,Object> env = new Hashtable<Object,Object>();
    env.put("java.naming.factory.initial", "weblogic.jndi.WLInitialContextFactory");
    env.put(OIMClient.JAVA_NAMING_PROVIDER_URL, "t3://localhost:14000");
    System.setProperty("java.security.auth.login.config","C:\\Oracle\\Middleware\\Oracle_IDM1\\designconsole\\config\\authwl.conf");
    System.setProperty("OIM.AppServerType", "wls");
    System.setProperty("APPSERVER_TYPE", "wls");
    tcUtilityFactory ioUtilityFactory = new tcUtilityFactory(env, "xelsysadm", "Weblogic123$");
    OIMClient client = new OIMClient(env);
    client.login("xelsysadm", "Weblogic123$".toCharArray());
    SimpleDateFormat formatter = new SimpleDateFormat("yyyy-MM-dd");
    tcUserOperationsIntf moUserUtility = (tcUserOperationsIntf)ioUtilityFactory.getUtility("Thor.API.Operations.tcUserOperationsIntf");
    Hashtable mhSearchCriteria = new Hashtable();
    mhSearchCriteria.put("USR_UDF_ACTUALSTARTDATE",formatter.format(date));
    tcResultSet moResultSet = moUserUtility.findAllUsers(mhSearchCriteria);
    printTcResultSet(moResultSet,"abcd");
    log4j:WARN No appenders could be found for logger (org.springframework.jndi.JndiTemplate).
    log4j:WARN Please initialize the log4j system properly.
    Exception in thread "main" Thor.API.Exceptions.tcAPIException: Error occurred while finding users.
    at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl_1036_WLStub.findAllUsersx(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
    at com.sun.proxy.$Proxy2.findAllUsersx(Unknown Source)
    at Thor.API.Operations.tcUserOperationsIntfDelegate.findAllUsers(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.security.Security.runAs(Security.java:41)
    at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
    at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
    at com.sun.proxy.$Proxy3.findAllUsers(Unknown Source)
    at oim.standalone.code.OIMAPIConnection.usersearch(OIMAPIConnection.java:209)
    at oim.standalone.code.OIMAPIConnection.main(OIMAPIConnection.java:342)
    Caused by: Thor.API.Exceptions.tcAPIException: Error occurred while finding users.
    at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.findAllUsers(tcUserOperationsBean.java:4604)
    at Thor.API.Operations.tcUserOperationsIntfEJB.findAllUsersx(Unknown Source)
    at sun.reflect.GeneratedMethodAccessor1614.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
    at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
    at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at com.sun.proxy.$Proxy347.findAllUsersx(Unknown Source)
    at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl.__WL_invoke(Unknown Source)
    at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
    at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl.findAllUsersx(Unknown Source)
    at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl_WLSkel.invoke(Unknown Source)
    at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
    at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
    at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
    at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
    at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Thank you

    Hi J,
    Thanks for the reply. But the code is working fine for OOTB attributes and  for 11g API i am getting permission exception
    Exception in thread "main" oracle.iam.platform.authz.exception.AccessDeniedException: You do not have permission to search the following user attributes: USR_UDF_ACTUALSTARTDATE.
    at oracle.iam.identity.usermgmt.impl.UserManagerImpl.search(UserManagerImpl.java:1465)
    at sun.reflect.GeneratedMethodAccessor1034.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at com.sun.proxy.$Proxy366.search(Unknown Source)
    at oracle.iam.identity.usermgmt.api.UserManagerEJB.searchx(Unknown Source)
    at sun.reflect.GeneratedMethodAccessor1449.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
    at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
    at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at com.sun.proxy.$Proxy365.searchx(Unknown Source)
    at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl.__WL_invoke(Unknown Source)
    at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
    at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl.searchx(Unknown Source)
    at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl_WLSkel.invoke(Unknown Source)
    at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
    at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
    at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
    at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
    at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused by: oracle.iam.identity.exception.SearchAttributeAccessDeniedException: You do not have permission to search the following user attributes: USR_UDF_ACTUALSTARTDATE.
    at oracle.iam.identity.usermgmt.impl.UserManagerImpl.search(UserManagerImpl.java:1462)
    ... 44 more

Maybe you are looking for