Line Chart / Graph Colors

How come I can change the colors of a bar graph series but not a line graph series?

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I got the problem fixed w/ the line graph not making the data lines the same color on the report as on the frmPlot graph. Compare the two screen shots below. The problem was as follows: When I created the graph (in the Chart Expert) the field u201CReadingDateu201D was not one of the Report Fields, and all the other fields were Report Fields (Reading, LowAlarm, UpperAlarm, LowerLimit, & UpperLimit). See the 3rd screen shot below. ReadingDate does show up as a Report Field now but it wasnu2019t at first. Originally, this field was only available in the Chart Expert as a recordset field. When I changed this field to be a Report Field, the graph then allowed me to change the data series line colors. This was not obvious at all. From the beginning when I setup the graph and passed in the recordset from VB it graphed all of the data series fine. The colors that the Chart Expert chose for each line just didnu2019t match what was on the frmPlot graph. Anyway, it is working now. I can at least say I learned (somethingu2019s to-do and somethingu2019s not to-do) a good bit about Crystal Reports in the process.
Thanks

Similar Messages

Create line chart/graph

Hi,
I've created a waveform chart that takes in an integer data point every seven seconds. I'd prefer it if the chart directly connected the data points to form a line chart instead of going down to zero during the seven seconds between readings. I checked around labview briefly but couldnt find any line charts. Is there a setting I can chanhe of a type of chart i should use to get a basic line graph?
THanks

The default chart is a 'line chart'. Right click on the plot legend and look at the interpolation. Unless you changed the Fill Base Line option, the chart will not drop to zero unless you are passing it a zero value.

Specific Line Chart Graph

I
I......................................................................................           ->> Upper Threshhold point
I
I   ...         ......                                                                                ^
I .   ...    ...                                                                                Y - axis
I ..     ....
I..
I.......................................................................................            ->> Lower Threshhold point
I..............................................................................................
X- axis...........................>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Dear Experts,
I have a requiremnet to generate a specific Line Chart in SAP. User will execute one program which will provide a report. The report will be a simple ALV grid report where User needs a customized Graph button. On clicking the button the program should generate the sample graph provided above. Curently I am working in SAP 4.6C version. I know SAP has already provide few chart and diagram display functionalities which are present in ALV. But above Line Chart is not among those. How to acheive the above objective?
Regards,
Pulokesh

Dear Mathews and Kai,
               Thanks for the help extended by you all regarding the problem faced by me. I didn't adopt the ways as per explained by you, but I studied a lot and procedures to create custom graph as per said by you. I found a unique way to achive my target by manipulating the variable list data and calculating the constant value of Upper/ Lower Threshold level. In this way I used the same old ALV grid technique to obtain the graph. Thanks for your help.
Regards,
Pulokesh

Line Chart/Graph for a Matrix report in Oracle Reports 10g

Hello,
If you have a Matrix report, say Month Name as rows, Year as columns (for example 2007, 2008, 2009) and sum of Sales dollar value as cells...I want a Line Graph which shows Months on the bottom axis and Years represented by lines and the sales value as the trend or data points on the horizontal line...it seems Oracle Reports cannot do this sincethe Chart wizard does not show either the Months or years as selectable fields for either X or Y axis.
I can easily write a sql which does the pivot and produce the results for Sales by month for last 3 yrs but in this case I would have to provide column alias similar to say CURRENT_YEAR, PRIOR_YEAR, PRIOR_PRIOR_YEAR. Then, the Chart wizard works correctly but the Legend shows the column alias which is not very desirable for an executive level report.
I was hoping that since a matrix report shows the correct column names, the legends will pull through correctly but I am stuck since the Chart for a matrix report doesn't work as I described above.
Does anyone know how to do this type of Chart on a Matrix?
Thanks,
Manish
Edited by: mhathi on Jul 15, 2009 1:59 PM

The way I'd do it is with a 3D-graph, I think you need that otherwise you will not be able to represent it properly ...
You will need to create another query just for the graph, which will create another group, containing only 3 columns (YEAR, MONTH, SALES), then start your Graph Wizard, then you will see two groups, select the one containing the 3 columns and when asked for the X-axis categories select both YEAR and MONTH, then for Y-axis select SALES.
That way it should work...

JavaFX Update Line Chart on Tab pane

Hi all,
I am wondering can anybody help with this problem.
I have an application that can create a new tab when the LineChart FXML view is called by way of onMouseClicked event from a bar graph (using scenebuilder). However, I need this Line chart to update when the user clicks a new bar on the bar graph page to show this new data.
Initially the Line chart tab will open and display data from the first bar graph click and when I click another bar in Tab A (bar chart) if it has the same number of rows it will refresh the LineChart tab otherwise I get an error. Then if I try to load another line graph tab using a different bar graph as the source I get a child duplication error
(So tab A has a bar graph that calls tab B to represent data as a line graph, however it wont do it more then once when there is a different number of points to show)
(Also tab C, another Bar chart will not load a new tab) Exceptions below & Class detail below.
I am using clear() to empty the observable list I have which is used to populate the graph and table before it reads in the new data values
What is the proper way/ best way to dynamically add another tab and update the chart in the tab with new values? Any help would be appreciated.
I am getting the following exceptions:
Exception in thread "JavaFX Application Thread" java.lang.IndexOutOfBoundsException: Index: 11, Size: 7
at java.util.ArrayList.rangeCheckForAdd(ArrayList.java:661)
at java.util.ArrayList.add(ArrayList.java:473)
at com.sun.javafx.collections.ObservableListWrapper.doAdd(ObservableListWrapper.java:101)
at javafx.collections.ModifiableObservableListBase.add(ModifiableObservableListBase.java:151)
at com.sun.javafx.collections.VetoableListDecorator.add(VetoableListDecorator.java:320)
at com.sun.javafx.scene.control.skin.TabPaneSkin$TabHeaderArea.addTab(TabPaneSkin.java:854)
at com.sun.javafx.scene.control.skin.TabPaneSkin$TabHeaderArea.access$500(TabPaneSkin.java:659)
at com.sun.javafx.scene.control.skin.TabPaneSkin.addTabs(TabPaneSkin.java:276)
at com.sun.javafx.scene.control.skin.TabPaneSkin.lambda$initializeTabListener$463(TabPaneSkin.java:357)
at com.sun.javafx.scene.control.skin.TabPaneSkin$$Lambda$108/885312968.onChanged(Unknown Source)
at com.sun.javafx.collections.ListListenerHelper$Generic.fireValueChangedEvent(ListListenerHelper.java:329)
at com.sun.javafx.collections.ListListenerHelper.fireValueChangedEvent(ListListenerHelper.java:73)
at javafx.collections.ObservableListBase.fireChange(ObservableListBase.java:233)
at javafx.collections.ListChangeBuilder.commit(ListChangeBuilder.java:482)
at javafx.collections.ListChangeBuilder.endChange(ListChangeBuilder.java:541)
at javafx.collections.ObservableListBase.endChange(ObservableListBase.java:205)
at javafx.collections.ModifiableObservableListBase.add(ModifiableObservableListBase.java:155)
at java.util.AbstractList.add(AbstractList.java:108)
at javafxapplication2.FXMLExecutionChartController$3.handle(FXMLExecutionChartController.java:262)
at javafxapplication2.FXMLExecutionChartController$3.handle(FXMLExecutionChartController.java:241)
at com.sun.javafx.event.CompositeEventHandler.dispatchBubblingEvent(CompositeEventHandler.java:86)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:238)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:191)
at com.sun.javafx.event.CompositeEventDispatcher.dispatchBubblingEvent(CompositeEventDispatcher.java:59)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:58)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.EventUtil.fireEventImpl(EventUtil.java:74)
at com.sun.javafx.event.EventUtil.fireEvent(EventUtil.java:54)
at javafx.event.Event.fireEvent(Event.java:198)
at javafx.scene.Scene$ClickGenerator.postProcess(Scene.java:3437)
at javafx.scene.Scene$ClickGenerator.access$7900(Scene.java:3365)
at javafx.scene.Scene$MouseHandler.process(Scene.java:3733)
at javafx.scene.Scene$MouseHandler.access$1500(Scene.java:3452)
at javafx.scene.Scene.impl_processMouseEvent(Scene.java:1728)
at javafx.scene.Scene$ScenePeerListener.mouseEvent(Scene.java:2461)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$MouseEventNotification.run(GlassViewEventHandler.java:348)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$MouseEventNotification.run(GlassViewEventHandler.java:273)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.javafx.tk.quantum.GlassViewEventHandler.handleMouseEvent(GlassViewEventHandler.java:382)
at com.sun.glass.ui.View.handleMouseEvent(View.java:553)
at com.sun.glass.ui.View.notifyMouse(View.java:925)
at com.sun.glass.ui.win.WinApplication._runLoop(Native Method)
at com.sun.glass.ui.win.WinApplication.lambda$null$141(WinApplication.java:102)
at com.sun.glass.ui.win.WinApplication$$Lambda$37/1146743572.run(Unknown Source)
at java.lang.Thread.run(Thread.java:745)
Exception in thread "JavaFX Application Thread" java.lang.NullPointerException
at javafxapplication2.FXMLExecutionChartController$3.handle(FXMLExecutionChartController.java:263)
at javafxapplication2.FXMLExecutionChartController$3.handle(FXMLExecutionChartController.java:241)
at com.sun.javafx.event.CompositeEventHandler.dispatchBubblingEvent(CompositeEventHandler.java:86)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:238)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:191)
at com.sun.javafx.event.CompositeEventDispatcher.dispatchBubblingEvent(CompositeEventDispatcher.java:59)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:58)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.EventUtil.fireEventImpl(EventUtil.java:74)
at com.sun.javafx.event.EventUtil.fireEvent(EventUtil.java:54)
at javafx.event.Event.fireEvent(Event.java:198)
at javafx.scene.Scene$ClickGenerator.postProcess(Scene.java:3437)
at javafx.scene.Scene$ClickGenerator.access$7900(Scene.java:3365)
at javafx.scene.Scene$MouseHandler.process(Scene.java:3733)
at javafx.scene.Scene$MouseHandler.access$1500(Scene.java:3452)
at javafx.scene.Scene.impl_processMouseEvent(Scene.java:1728)
at javafx.scene.Scene$ScenePeerListener.mouseEvent(Scene.java:2461)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$MouseEventNotification.run(GlassViewEventHandler.java:348)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$MouseEventNotification.run(GlassViewEventHandler.java:273)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.javafx.tk.quantum.GlassViewEventHandler.handleMouseEvent(GlassViewEventHandler.java:382)
at com.sun.glass.ui.View.handleMouseEvent(View.java:553)
at com.sun.glass.ui.View.notifyMouse(View.java:925)
at com.sun.glass.ui.win.WinApplication._runLoop(Native Method)
at com.sun.glass.ui.win.WinApplication.lambda$null$141(WinApplication.java:102)
at com.sun.glass.ui.win.WinApplication$$Lambda$37/1146743572.run(Unknown Source)
at java.lang.Thread.run(Thread.java:745)
Class Information:
//Call to the Line chart graph
n.setOnMouseClicked(new EventHandler<MouseEvent>()
                @Override
                public void handle ( MouseEvent e )
                    String s1 = dt.getXValue();
                    String s = s1.trim();
                    if ( baseHash.containsKey(s) )
                        String value = (String) baseHash.get(s);
                        String hashValue = value.substring(6, 38);
                        System.out.println(hashValue);
                        FXMLLineChartController.setHash(hashValue);
                         try
                              lineTab .setText("Line Graph (Rows Read)");
                              lineTab.setContent(FXMLLoader.load(getClass().getResource("/javafxapplication2/FXMLLineChart.fxml")));
                              Node aNode = (Node) e.getSource();
                              Scene scene = aNode.getScene();
                              thisTabPane = (TabPane) scene.lookup("#tabPane");
                              thisTabPane.getTabs().add(lineTab);
                              selectionModel.selectLast();
                              //throw new UnsupportedOperationException("Not supported yet."); //To change body of generated methods, choose Tools | Templates.
                          catch ( IOException ex )
                              Logger.getLogger(FXMLWrittenChartController.class.getName()).log(Level.SEVERE, null, ex);
//Line Chart controller
//Create the Graph
    @FXML
    private LineChart barChart;
public void populateGraph ()
        System.out.println("Populate graph Line Chart");
        final CategoryAxis xAxis = new CategoryAxis();
        final NumberAxis yAxis = new NumberAxis();
        ObservableList<XYChart.Series<String, Number>> barChartData = FXCollections.observableArrayList();
        barChartData.clear();
        baseHash.clear();
        xAxis.setLabel("Query");
        yAxis.setLabel("Number of Executions");
        series1.setName("Data from User DB2 for Query " +getHash() );
        for ( int i = 0; i < userLine.size(); i++ )
                System.out.println(getHash() + " Usersize = " + userLine.size() + " base size " +baseLine.size());
                series1.getData().add(new XYChart.Data<String, Number>(userLine.get(i).getBuildNumber(), (userLine.get(i).getDYN_Num_Executions())));
        barChartData.add(series1);
        barChart.setData(barChartData);

Hi all,
I am wondering can anybody help with this problem.
I have an application that can create a new tab when the LineChart FXML view is called by way of onMouseClicked event from a bar graph (using scenebuilder). However, I need this Line chart to update when the user clicks a new bar on the bar graph page to show this new data.
Initially the Line chart tab will open and display data from the first bar graph click and when I click another bar in Tab A (bar chart) if it has the same number of rows it will refresh the LineChart tab otherwise I get an error. Then if I try to load another line graph tab using a different bar graph as the source I get a child duplication error
(So tab A has a bar graph that calls tab B to represent data as a line graph, however it wont do it more then once when there is a different number of points to show)
(Also tab C, another Bar chart will not load a new tab) Exceptions below & Class detail below.
I am using clear() to empty the observable list I have which is used to populate the graph and table before it reads in the new data values
What is the proper way/ best way to dynamically add another tab and update the chart in the tab with new values? Any help would be appreciated.
I am getting the following exceptions:
Exception in thread "JavaFX Application Thread" java.lang.IndexOutOfBoundsException: Index: 11, Size: 7
at java.util.ArrayList.rangeCheckForAdd(ArrayList.java:661)
at java.util.ArrayList.add(ArrayList.java:473)
at com.sun.javafx.collections.ObservableListWrapper.doAdd(ObservableListWrapper.java:101)
at javafx.collections.ModifiableObservableListBase.add(ModifiableObservableListBase.java:151)
at com.sun.javafx.collections.VetoableListDecorator.add(VetoableListDecorator.java:320)
at com.sun.javafx.scene.control.skin.TabPaneSkin$TabHeaderArea.addTab(TabPaneSkin.java:854)
at com.sun.javafx.scene.control.skin.TabPaneSkin$TabHeaderArea.access$500(TabPaneSkin.java:659)
at com.sun.javafx.scene.control.skin.TabPaneSkin.addTabs(TabPaneSkin.java:276)
at com.sun.javafx.scene.control.skin.TabPaneSkin.lambda$initializeTabListener$463(TabPaneSkin.java:357)
at com.sun.javafx.scene.control.skin.TabPaneSkin$$Lambda$108/885312968.onChanged(Unknown Source)
at com.sun.javafx.collections.ListListenerHelper$Generic.fireValueChangedEvent(ListListenerHelper.java:329)
at com.sun.javafx.collections.ListListenerHelper.fireValueChangedEvent(ListListenerHelper.java:73)
at javafx.collections.ObservableListBase.fireChange(ObservableListBase.java:233)
at javafx.collections.ListChangeBuilder.commit(ListChangeBuilder.java:482)
at javafx.collections.ListChangeBuilder.endChange(ListChangeBuilder.java:541)
at javafx.collections.ObservableListBase.endChange(ObservableListBase.java:205)
at javafx.collections.ModifiableObservableListBase.add(ModifiableObservableListBase.java:155)
at java.util.AbstractList.add(AbstractList.java:108)
at javafxapplication2.FXMLExecutionChartController$3.handle(FXMLExecutionChartController.java:262)
at javafxapplication2.FXMLExecutionChartController$3.handle(FXMLExecutionChartController.java:241)
at com.sun.javafx.event.CompositeEventHandler.dispatchBubblingEvent(CompositeEventHandler.java:86)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:238)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:191)
at com.sun.javafx.event.CompositeEventDispatcher.dispatchBubblingEvent(CompositeEventDispatcher.java:59)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:58)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.EventUtil.fireEventImpl(EventUtil.java:74)
at com.sun.javafx.event.EventUtil.fireEvent(EventUtil.java:54)
at javafx.event.Event.fireEvent(Event.java:198)
at javafx.scene.Scene$ClickGenerator.postProcess(Scene.java:3437)
at javafx.scene.Scene$ClickGenerator.access$7900(Scene.java:3365)
at javafx.scene.Scene$MouseHandler.process(Scene.java:3733)
at javafx.scene.Scene$MouseHandler.access$1500(Scene.java:3452)
at javafx.scene.Scene.impl_processMouseEvent(Scene.java:1728)
at javafx.scene.Scene$ScenePeerListener.mouseEvent(Scene.java:2461)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$MouseEventNotification.run(GlassViewEventHandler.java:348)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$MouseEventNotification.run(GlassViewEventHandler.java:273)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.javafx.tk.quantum.GlassViewEventHandler.handleMouseEvent(GlassViewEventHandler.java:382)
at com.sun.glass.ui.View.handleMouseEvent(View.java:553)
at com.sun.glass.ui.View.notifyMouse(View.java:925)
at com.sun.glass.ui.win.WinApplication._runLoop(Native Method)
at com.sun.glass.ui.win.WinApplication.lambda$null$141(WinApplication.java:102)
at com.sun.glass.ui.win.WinApplication$$Lambda$37/1146743572.run(Unknown Source)
at java.lang.Thread.run(Thread.java:745)
Exception in thread "JavaFX Application Thread" java.lang.NullPointerException
at javafxapplication2.FXMLExecutionChartController$3.handle(FXMLExecutionChartController.java:263)
at javafxapplication2.FXMLExecutionChartController$3.handle(FXMLExecutionChartController.java:241)
at com.sun.javafx.event.CompositeEventHandler.dispatchBubblingEvent(CompositeEventHandler.java:86)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:238)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:191)
at com.sun.javafx.event.CompositeEventDispatcher.dispatchBubblingEvent(CompositeEventDispatcher.java:59)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:58)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.EventUtil.fireEventImpl(EventUtil.java:74)
at com.sun.javafx.event.EventUtil.fireEvent(EventUtil.java:54)
at javafx.event.Event.fireEvent(Event.java:198)
at javafx.scene.Scene$ClickGenerator.postProcess(Scene.java:3437)
at javafx.scene.Scene$ClickGenerator.access$7900(Scene.java:3365)
at javafx.scene.Scene$MouseHandler.process(Scene.java:3733)
at javafx.scene.Scene$MouseHandler.access$1500(Scene.java:3452)
at javafx.scene.Scene.impl_processMouseEvent(Scene.java:1728)
at javafx.scene.Scene$ScenePeerListener.mouseEvent(Scene.java:2461)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$MouseEventNotification.run(GlassViewEventHandler.java:348)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$MouseEventNotification.run(GlassViewEventHandler.java:273)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.javafx.tk.quantum.GlassViewEventHandler.handleMouseEvent(GlassViewEventHandler.java:382)
at com.sun.glass.ui.View.handleMouseEvent(View.java:553)
at com.sun.glass.ui.View.notifyMouse(View.java:925)
at com.sun.glass.ui.win.WinApplication._runLoop(Native Method)
at com.sun.glass.ui.win.WinApplication.lambda$null$141(WinApplication.java:102)
at com.sun.glass.ui.win.WinApplication$$Lambda$37/1146743572.run(Unknown Source)
at java.lang.Thread.run(Thread.java:745)
Class Information:
//Call to the Line chart graph
n.setOnMouseClicked(new EventHandler<MouseEvent>()
                @Override
                public void handle ( MouseEvent e )
                    String s1 = dt.getXValue();
                    String s = s1.trim();
                    if ( baseHash.containsKey(s) )
                        String value = (String) baseHash.get(s);
                        String hashValue = value.substring(6, 38);
                        System.out.println(hashValue);
                        FXMLLineChartController.setHash(hashValue);
                         try
                              lineTab .setText("Line Graph (Rows Read)");
                              lineTab.setContent(FXMLLoader.load(getClass().getResource("/javafxapplication2/FXMLLineChart.fxml")));
                              Node aNode = (Node) e.getSource();
                              Scene scene = aNode.getScene();
                              thisTabPane = (TabPane) scene.lookup("#tabPane");
                              thisTabPane.getTabs().add(lineTab);
                              selectionModel.selectLast();
                              //throw new UnsupportedOperationException("Not supported yet."); //To change body of generated methods, choose Tools | Templates.
                          catch ( IOException ex )
                              Logger.getLogger(FXMLWrittenChartController.class.getName()).log(Level.SEVERE, null, ex);
//Line Chart controller
//Create the Graph
    @FXML
    private LineChart barChart;
public void populateGraph ()
        System.out.println("Populate graph Line Chart");
        final CategoryAxis xAxis = new CategoryAxis();
        final NumberAxis yAxis = new NumberAxis();
        ObservableList<XYChart.Series<String, Number>> barChartData = FXCollections.observableArrayList();
        barChartData.clear();
        baseHash.clear();
        xAxis.setLabel("Query");
        yAxis.setLabel("Number of Executions");
        series1.setName("Data from User DB2 for Query " +getHash() );
        for ( int i = 0; i < userLine.size(); i++ )
                System.out.println(getHash() + " Usersize = " + userLine.size() + " base size " +baseLine.size());
                series1.getData().add(new XYChart.Data<String, Number>(userLine.get(i).getBuildNumber(), (userLine.get(i).getDYN_Num_Executions())));
        barChartData.add(series1);
        barChart.setData(barChartData);

Drill Down for Multiple Series in a Line Chart

Hello,
I seem to have a problem with the drill-down functionality in a line chart that has multiple series.
I have a line chart that displays the readings of a patient over a period of 1 month. For each day, there is the glucose level reading, blood pressure reading, etc... So, each reading is a different series in my line chart graph.
The basic requirement is: With a mouse over event on the chart, I am willing to display all the data that belongs to that day. The data will be displayed at the bottom of the screen in a small panel. It is very simple to do it when the line chart has only 1 series:
i) Enable drill down.
ii) Choose 'Row' as insertion type.
iii) Fill out the destination field.
iv) Make sure your labels (at the bottom of the screen) get the data from the destination cell.
When there is more than one series, it becomes very difficult. XCelsius will not let me use the same destination cells for different series. So, I will have to use other destination cells. In that case, I will not know on which day is the user on. Is there any way to achieve this functionality?
Let me know if you need further information.

This is certainly possible, but there's a bit of a trick to it (and really hard to explain without screenshots!). There's two halves to it:
1. Write the date that has been selected to a cell (for each series).
2. Write the name of the series that was clicked to some cell (this is the property 'Series Name Destination').
So let's say your three series are Glucose, Blood Pressure and Temp. Have those series names in B1,C1,D1 (with your dates down in column A). Insert a row below the series names (2:2), and then set up your insertion type for the chart as 'row'. The source data (for all three series) should be your list of dates in column a. The insertion cells for the three series will be, in order, B2,C2,D2. Now, depending on which point is clicked in the chart, the selected day will be inserted into one of those three cells. Completely useless unless you know which series was clicked.
So you need to insert the name of the series that was clicked ('Series Name Destination') into the spreadsheet, let's say in F1. The rest is just Excel formulas. The logic is, you can now tell what series was clicked, and go and look up the date that was inserted for that series, then go and look up the row that corresponds to that date. So to get the date that was just clicked, your formula (in F2) would be =HLOOKUP(F1,B1:D2,2,0).
Then a VLOOKUP will get the results from that row of data. For example, if I inserted another row at row 3 (to show my 'result' values) the formula in B3 would be =VLOOKUP($F$2,$A$4:$D$13,2,0).
I hope that makes sense.

CR 9 - Need HELP Setting Line Graph colors in the Chart Expert

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I created a Crystal Report (CR) based off an existing Trend Analysis report. I have created a VB6 application that calls the .RPT file I created for the report in CR. The VB6 app sets the report recordset via code that corresponds to the .TTX file, and the parameters . The report contains a Line graph that plots five pieces of data. The report & graph work good. The Problem: CR determines the color of each line on the graph. However, I need to set the color for each line to correspond to the colors used on our existing reports. The users are accustom to a certain color representing a certain set of data on the existing reports.   I have tried everything I can think of and from all documentation I can find, and nothing changes the line colors.   I have tried all of the following:
1.) From the Chart Expert, Option tab, I click the Format button next to Color and setup conditional color settings per each piece of data.   However, when I run the report these conditional color settings are not reflected on the CR graph.     I am using formula fields (based off database fields in the recordset) to produce the report. However, I only see the database fields to use in the conditional color formatting screen and not the formula fields.    I thought this would possibly be the cause why the colors wonu2019t change on the CR, but I canu2019t find a way to make the formula fields show up in the list.
2.)Also, I tried right clicking the individual lines of the graph and change the selected item color, but this didnu2019t change the color either. I do this in Design mode and Preview mode and neither one changes the color of the lines on the graph.
3.)I have also looked into the CR object model to see if I can change the line colors of the graph via code and it doesn't look like I am given this flexibility.
Do you know what I am doing wrong here?   I just want to be able to set the color of each line on the CR graph to the color I want instead of using the default colors. Are there some Hot Fixes that I need to apply to my copy of CR?
Thanks

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I got the problem fixed w/ the line graph not making the data lines the same color on the report as on the frmPlot graph.   Compare the two screen shots below.   The problem was as follows: When I created the graph (in the Chart Expert) the field u201CReadingDateu201D was not one of the Report Fields, and all the other fields were Report Fields (Reading, LowAlarm, UpperAlarm, LowerLimit, & UpperLimit). See the 3rd screen shot below. ReadingDate does show up as a Report Field now but it wasnu2019t at first.   Originally, this field was only available in the Chart Expert as a recordset field. When I changed this field to be a Report Field, the graph then allowed me to change the data series line colors.   This was not obvious at all.   From the beginning when I setup the graph and passed in the recordset from VB it graphed all of the data series fine.   The colors that the Chart Expert chose for each line just didnu2019t match what was on the frmPlot graph.   Anyway, it is working now.     I can at least say I learned (somethingu2019s to-do and somethingu2019s not to-do) a good bit about Crystal Reports in the process.
Thanks

CR XI - Problem Setting Line Graph colors in the Chart Expert

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I created a Crystal Report (CR) of an existing Trend Analysis report. I have created a VB6 application that calls the .RPT file I created for the report in CR. The VB6 app sets the report recordset via code that corrsponds to the .TTX file, and the parameters . The report contains a Line graph that plots five pieces of data. The report & graph work good. CR determines the color of each line on the graph. However, I need to set the color for each line to correspond to the colors used on our existing reports. The users are accustom to a certain color representing a certain set of data on the existing reports.   I have tried everything I can think of and from all documentation I can find, and nothing changes the line colors.   I have tried all of the following:
1.) From the Chart Expert, Option tab, I click the Format button next to Color and setup conditional color settings per each piece of data.   However, when I run the report these conditional color settings are not reflected on the CR graph.     I am using formula fields (based off database fields in the recordset) to produce the report. However, I only see the database fields to use in the conditional color formatting screen and not the formula fields.    I thought this would possibly be the cause why the colors wonu2019t change on the CR, but I canu2019t find a way to make the formula fields show up in the list.
2.)Also, I tried right clicking the individual lines of the graph and change the selected item color, but this didnu2019t change the color either. I do this in Design mode and Preview mode and neither one changes the color of the lines on the graph.
3.)I have also looked into the CR object model to see if I can change the line colors of the graph via code and it doesn't look like I am given this flexibility.
Do you know what I am doing wrong here?   I just want to be able to set the color of each line on the CR graph to the color I want instead of using the default colors.
Thanks,Steve

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I got the problem fixed w/ the line graph not making the data lines the same color on the report as on the frmPlot graph.   Compare the two screen shots below.   The problem was as follows: When I created the graph (in the Chart Expert) the field u201CReadingDateu201D was not one of the Report Fields, and all the other fields were Report Fields (Reading, LowAlarm, UpperAlarm, LowerLimit, & UpperLimit). See the 3rd screen shot below. ReadingDate does show up as a Report Field now but it wasnu2019t at first.   Originally, this field was only available in the Chart Expert as a recordset field. When I changed this field to be a Report Field, the graph then allowed me to change the data series line colors.   This was not obvious at all.   From the beginning when I setup the graph and passed in the recordset from VB it graphed all of the data series fine.   The colors that the Chart Expert chose for each line just didnu2019t match what was on the frmPlot graph.   Anyway, it is working now.     I can at least say I learned (somethingu2019s to-do and somethingu2019s not to-do) a good bit about Crystal Reports in the process.
Thanks

Adding New Data To Line Chart: New Data Does Not Inherit Previous Color Scheme

This has me very confused. Here's what's being done:
Right-click on existing chart
Select "Data..."
Add additional data in the dialog that pops up
Click check-mark
The chart appends more data to the existing lines on the line chart, as it should, however the newly created portion of one of the lines (new data) is not the same color as the line up to that point. The line color is #0084A9, but when the new data is entered the new data on that same line is represented in an ever so slightly darker blue.
Any guesses as to why that would be happening? I can manually chage it, but that's a hassle and shouldn't necessary - I wouldn't think, anyway. Any help would be appreciated.
Thanks!
Very Best,
Tanner Campbell

OK looked at this closer, and seen your problem as acolor shift from PMS to a CMYK that was slightly off.
If you want to work with Hexadecimal colors, then you need to File>> Document Color Mode >> RGB, otherwise your colors won't stick but convert to cmyk and be off.
Your graph went through some editing and got corrupted. I copied and pasted your date into a new graph, and then used the testube to apply samples to get your colors back. Will send you an email with fixed file.
That’s the strangest thing. The color you’re seeing is #4e46ff, the color it should be is the color reflected in the legend: #0083a9
What’s extra interesting is that when I open it I see the legend color for the entire line. Then, when I add data, the section of the line that depicts the newly added data is #4e46ff …. So I have this two tone line. It’s intriguing that you opened this on a mac and this difference was presence, I wonder if that is in anyway a clue. Maybe the original document was created in RGB and the new data is on CMYK? Thoughts?

How to create a Power View bringing barchart and line chart together in same graph

We are planning to create power view report that has bar and line charts on same graph. Could you please let us know whether it is feasible in Power View & how to add trend line in power view .
Thanks,
Sandeep.

This is not possible with Power View. It is possible with Power BI (Online at PowerBI.com) See image below.
Please vote or mark as answer if you found the response helpful.
Regards, Avi
www.powerpivotpro.com
Wiki:How to ask a Power Pivot Question to get a prompt, accurate and helpful response

Need to change colors of lines in an Omniportlet Line Chart

I am running Oracle Portal on a 10g Web server. I have created an Omniportlet and I am displaying data in a line chart. Is it possible for me to define the colours of the lines in the linechart?

Hi I didn't changed colors in line chart but I managed to redesign lot of omniportlets.
What you can do is to re-define CSS.
Add an HTML portlet in your page with some CSS embedded.
To catch wich class are to be re defined, I recommand you to use firefox with the extension Webdevelopper.
Use the "Informations - display element information" functionnality to catch wich class are used for your chart.
Then redefine those classes in your custom CSS.
Hope that will help

Change Color from grid lines in Flash 2D Line Chart

Hi,
does anybody know how to change the color from the grid lines in 2D Line Chart?
The color is always black (000000), I will use gray (CCCCCC).
I can use a custom XML. Can you give me an example please???
Where can I read something about the possible XML-Tags in Custom XML for Charts?
Best regards
Simona

Simona,
anychart.com has XML reference you can use for the charting engine in APEX.
Try using custom XML and sticking this inside the grid > values tag:
<lines color='0xCCCCCC' />- Marco

Color not consistent for Line Chart and Legend for prev and curryr

Hi
I am trying to pull last year and current year data in line chart with different color coding. I have multiple parameters selection on single chart. For some it reflects the color properly and for others it interchanges the color.
Crystal xI R2..
Please let me know the solution.
Thanks

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Changing color of lines in line chart

Okay this is a dumb question but how do I change the color of
lines in a line chart?

"spacehog" <[email protected]> wrote in
message
news:g81g1a$eq4$[email protected]..
> Okay this is a dumb question but how do I change the
color of lines in a
> line
> chart?
http://www.rphelan.com/2008/05/23/taking-control-of-flex-charting-styles/

Crystal Reports - Change Line Chart Color Dynamically

Hello,
I have Crystal report 14.
I'm trying to create a line chart and need to be able to set the colors of the lines at the time the report is run. The colors the lines need to be are specified in a database and a different color could be specified each time the report is run.
Can anybody suggest how I would do this?
Thanks
Edited by: Robert4543 on Nov 16, 2011 5:23 PM

I've tried to use 'Color Highlight' to change the color of the lines, but it only changed the colors of the markers on the line, not the actual line itself. Is there a way to get it to change the color of the line?
I may have one line I need to display as 1 color, and a 2nd that I need to display as another. Using color highlight changed the markers for both lines to the same color. Is there a way to specify which line I want to change the color of in "Color Highlight"?
Thanks.
Edited by: Robert4543 on Nov 16, 2011 8:41 PM

Line Chart / Graph Colors

Similar Messages

Maybe you are looking for