Line item needs to be deleted from a reservation

Hi Guru's,
For a reservation, one of the line items has been created without any material number or
plant. Actually while adding this line item, the material which was selected was discontinued.
The message which popped-up after adding this line item was " This item is discontinued do you want to
continue". Once 'Yes' was pressed, the reservation was completed. Now for this line item both the
material number as well as plant is coming as blank becuase of which I am not able to delete
this item.
Please let me know if we can delete this line item from the reservation or not.
Thanks,
Swati

Mark the Check box against Delete option which is beside Final issue in MB22 and try.
Regards,
Ashok

Similar Messages

  • User Exit during Sales Order Creation - New Line Item needed

    I have a situation during the process of sales order creation. If a Material in a line item has say 27 EA and the Base Unit is EA. But the Sales Unit is CSE. Then whenever the user enters 27 EA and presses enter he should get two line items.
    The first line item needs to convert to maximum number of CSE posible and the rest will be the second line item with the remaining EA. The order isn't important but that is what is needed. Question is how do I approach this problem and code my user exit accordingly and where do I code it.
    I was looking at SAPMV45A and saw the program MV45AIZZ which is meant as a user exit for any PAI event handling. If anybody has encountered this kind of requirement can you please share your view on this.
    I will definitely reward points for useful answers.
    Clark

    Hello Mahendra
    The requirement is as follows :
    PART 1:
    Sales Order Enter: 
    1.     When a line item is entered on a sales order (VA01 or VA02), at enter, check the sales unit of measure (VBAP-VRKME).
    •     Do not check line items where item category (VBAP-PSTYV) = TANN, TAPS or ZTAP.  TANN are free goods that should not be considered for consolidation.  TAPS & ZTAP are lower level materials as a result of product selection.  They will be attached to a higher-level material with an item category of TAX, which is relevant for consolidation.
    •     Do not check items where VRKME <> EA
    2.     If VRKME = EA, go to MARM for MATNR.
    3.     Go to record where alternate unit of measure (MEINH) = CSE, get the value from the numerator field (UMREZ).
    4.     Divide the order quantity (VBEP-WMENG) by UMREZ.
    5.     If the result is greater than 1.0, the customer has ordered more than one case and a new line item needs to be added to the sales order for the case quantity.
    6.     Add a new line to VBAP for the same material with the case quantity.  If not a whole value, the remainder of eaches (bottles) should update the qty on the first item on VBAP.
    •     Part 1 is relevant for order types ZCA, ZOR, ZSO, RE, ZSM
    PART 2:
    Batch Job to run prior to the Delivery Due List:
    1.     Read VBUK for Delivery Status (LFSTK) = A (delivery not processed).  Get all of the document numbers (VBELN).
    2.     Go to VBEP for those document numbers to get the goods issue date for the order.  There will be many records in VBEP for the same sales order.  Look at all orders with a goods issue date (WADAT) of next day.
    3.     Go to VBAK for those document numbers to see if there are multiple sales orders for the same Sold To party (KUNNR).
    4.     For customers who have more than one order in VBAK, search all line items (for all orders).  If there are no duplicate materials across sales orders, do nothing.
    •     Do not check line items where item category (VBAP-PSTYV) = TANN, TAPS or ZTAP.  TANN are free goods that should not be considered for consolidation.  TAPS & ZTAP are lower level materials as a result of product selection.  They will be attached to a higher-level material with an item category of TAX, which is relevant for consolidation.
    •     Do not check line items where reason for rejection (VBAP-ABGRU) is not blank
    5.     If there are duplicate materials, go through the same logic as in part 1.  If the quantity across the sales orders adds up to greater than one case, add the appropriate quantity to a new line item on the first sales order.   If there is a remainder qty, update the line item on the first sales order with this qty. In this case, the quantities on the second sales order needs to be closed out with a reason for rejection code of 50, ‘Line Item Consolidation’. If there is no remainder,  update the qty on this item directly.
    •     Part 2 is relevant for order types ZOR, ZCA, ZSM
    •     This batch job will have to be run manually for Day Pick orders.  The end of this program should automatically kick off the delivery due list for Day Pick orders, shipping condition 02.
    Business Justification:
    The business requires that like order line items be consolidated to one line item prior to the order going to the warehouse for picking.  This will aid in picking at the warehouse as well as result in the customer invoice not reflecting more than one line item for the same material.  In the case where the customer has truly ordered more than a case, i.e;, 1 case, 2 bottles, the documents in SAP will still reflect 2 lines.

  • I am trying to free up some room on my touch and am unable to delete any songs or books from the listing.  With iTumes open and my touch listed I open the touch.  I then select the items I want to delete from the touch and press the delete button.

    I am trying to free up some room on my touch and am unable to delete any songs or books from the listing.  With iTumes open and my touch listed I open the touch.  I then select the items I want to delete from the touch and press the delete button.  Nothing happens.  I have also tried to right click on the item, but a delete option is not listed.  What do I need to do to get rid of some books?

    Open itunes, connect ipod, go to each tab, select what you want to be on the ipod, sync

  • When I try to start outlook for mac, i get the message that there is an old version of the Microsoft Database Daemon that needs to be deleted from the start up files. Where do I find the start up files???

    when I try to start outlook for mac, i get the message that there is an old version of the Microsoft Database Daemon that needs to be deleted from the start up files. Where do I find the start up files???

    In the Users & Groups pane of System Preferences.
    (66105)

  • All Line Items need to send  in the PO Change EDI IDoC - ORDCHG

    Hi EDI Experts ,
    We have ECC 6.04.
    We are sending PO Change Message Tyep by using Message Type ORDCHG ( Basic Type ORDERS05)
    If PO Changes system trigger IDoc  and in Std IDoc it displays only that Line Item who had been changed .
    Requierment is that  if there is change in any single item, then  sytem should send entire/whole PO document ( all Line Items) .
    I think we need to write some code in teh routine /requierment ...etc.
    Can anyone suggest what I need to do to acehive the above ?
    Thanks
    NAP

    Hello NAP ,
         I have the same problem that you. I ´m using  the message type ORDCHG  with basic type ORDERS05.    when sending change order through Idoc only show me the updete/delete Item in segnment E1EDP01. 
    What object did you use for the message type ORDCHG ?
    What settings should I consider for this?
    Thanks in advance,
    Luis.-

  • Help needed - E-mail Deleted from server

    Hello Everyone !
    I just got my Z30 a week ago , and hope i get help with this
    My problem is that i realized that some e-mails of my gmail account are not on web server but are on my phone , yet iam sure i didn't Delete any mails from my Z30 !
    I really need that my BB wouldnt download e-mails and delete them from server , i need them to be on gmail whenever i need to see them or from another phone or client .
    Can anyone help with that please ?
    Thanks

    Hi and Welcome to the Community!
    It all depends on a great many things:
    How exactly is the GMail account integrated to the device? IMAP? POP? EAS?
    How exactly do you have your device configured for deleted item reconciliation? Delete from device only? Delete on both device and server?
    Is there any other client email software running (e.g., Outlook, Thunderbird, etc.) and interfacing with this GMail account? If so, are they perhaps the culprit with this deletion activity?
    Is this the case all the time? Just with some items? It would be quite unusual to have this behavior with only some items...typically, it's "all or nothing".
    Is this deletion from the server happening as the items are synchronizing to your device? Or, is it happening after some other interaction by you with the items?
    Sorry for so many questions, but your post was a bit confusing:
    ahmed_hesham wrote:
    My problem is that i realized that some e-mails of my gmail account are not on web server but are on my phone , yet iam sure i didn't Delete any mails from my Z30 !
    There is no setting that would act this way...if you delete it from your device, then it may or may not delete from the server -- it depends on the settings you have configured on your device. So the wording there is a little bit confusing...
    ahmed_hesham wrote:
    I really need that my BB wouldnt download e-mails and delete them from server , i need them to be on gmail whenever i need to see them or from another phone or client .
    The only time that might happen is with POP...which, IMHO, is a "dead" technology...IMAP and EAS are so much better, and should always be used if available (and, for GMail, IMAP definitely is available, and EAS might be available depending on a number of other circumstances).
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Shopping cart line items are missing while transfering from ITS to EBP

    Hi everyone
    I am Raghu, working on EBP (version 2.0)
    Some shopping cart line items are missing while transferring the shopping cart data from ITS to EBP.
    For example in my shooping cart 4 items are there,during transferring shopping cart data from ITS to EBP all 4 items are getting updated for all the shopping cart related tables except account assignment table.
    In account assignment table for this particular shopping cart only 3 items are updated and usually the first line item gets missed out.Hence the the system fails to create the follow on documents in R/3. 
    This is happening randomly for few of the shopping carts that too most of the cases first item of the shopping cart was not updating reqacct table(this is account assignment table for shooping cart items).
    I have debugged entire scenario,but  couldn't find the cause for this..
    Can any one  please advise me....why this is happening?
    Your immidiate ersponse will surely help me a lot.
    Thanks,
    Raghu

    Hi Yann
    Thanks for your support.
    Yes, we are using EBP2.0/CRM 2.0C & the support pack level is SAPKU20C23.
    Please advice
    Thanks
    Raghu

  • R12: only 1 line item in receivables after transfer from AGIS

    Hello,
    I created 3 lines in an AGIS transaction and after approval in "Inbound", the lines were transferred to Receivables.
    But, in receivables line items, we have only one line having the total amount of the 3 lines.
    can anyone tell how generate same amount of lines in AR as defined in AGIS after the transfer??

    well, i got my answer from metalink note ID 734551.1

  • Item catogory TAK was delete from standar system.

    Good days.
    I have a little question, i try find the item catogory TAK in the sistem in SAP ECC 6.0 Enhancement Package 4, someone know why this item category was delete from the standar system, i search for it in several systems, but i can´t find it, the systems wasn´t modified. I find the item catogory TAK in systems SAP ECC 6.0 without Enhancement Package or release lower.
    Thanks for the help the you can offer about this topic.

    Definitely somebody would have deleted by oversight.  What you can do is check the same in IDES and create as it is.
    G. Lakshmipathi

  • Help needed for photos deleted from Verizon Cloud

    After selecting muliple photos in Verizon Cloud, they were inadvertently deleted rather than downloaded to my PC.  These photos had been deleted from my phone after backed up to Verizon Cloud.  The Trash Can in my Verizon Could has contacts and music deleted over the past year, but not these recently deleted photos.  Can these photos deleted from my Verizon Cloud be restored to / undeleted from my Verizon Cloud?

    Follow up on this post.  If you want the capability to restore items deleted from your Verizon Cloud storage, use the website: https://cloud.verizonwireless.com
    Unless the iPhone app and Windows 8 app that access your Verizon Cloud storage directly and delete things directly from the cloud, the website has a trash can feature.  This feature gives you a second chance to decide if you want to restore an item you deleted or permanently delete it from your cloud storage -- similar to restoring deleted files or emptying your recycle bin on your PC.  In other words:
    Verizon Cloud website Trash Can = PC Recycle Bin
    Once something is deleted using the apps or from the website trash can, you can assume it is gone.

  • Different Line Item needs to be displayed in ALV

    Hi All,
    We have a requirement where in we have to display separate line items corresponding to the separate header in ALv.
    we are using the FM REUSE_ALV_HIERSEQ_LIST_DISPLAY, but it is displaying all the line items in all different headers .
    For Eg:
    Desired Output:
    Header Cooresponding to Account Number 1
    Coum 1 coum2 colm 3 colm4 " for Acc#$1
    Header Cooresponding to Account Number 2
    Coum 1 coum2 colm 3 colm4 " for Acc#2
    Output getting now:
    Header Cooresponding to Account Number 1
    Coum 1 coum2 colm 3 colm4 " for Acc#$1
    Coum 1 coum2 colm 3 colm4 " for Acc#2
    Header Cooresponding to Account Number 2
    Coum 1 coum2 colm 3 colm4 " for Acc#$1
    Coum 1 coum2 colm 3 colm4 " for Acc#2
    Thanks in advance
    Regards
    Karan Arya

    Hi,
    Are you linking correclty the "key" structure?
    Say, for example:
      gs_key-header01 = 'ACCOUNT'.
      gs_key-item01 = 'ACCOUNT'.
    This should link your two tables by the "account" field.
    and the call to the function
      CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
          EXPORTING
            i_callback_program = sy-repid
            it_fieldcat                 = gt_fieldcat
            i_tabname_header  = 'GT_HEADER'
            i_tabname_item       = 'GT_ITEM'
            is_keyinfo                = gs_key
          TABLES
            t_outtab_header    = gt_header
            t_outtab_item      = gt_item
          EXCEPTIONS
            program_error      = 1
            OTHERS             = 2.

  • Line item needs to be dispalyed for varient values

    Hi
    The requirement of the customer is to get the varient values as line item in sales order with main item.
    Thanks
    Rambabu

    hello, friend.
    are you talking about configurable materials and the requirement is for components to be relevant for pricing?
    if so, you can go to www.sap-img.com and look up variant configuration.  it is quite comprehensive.  also, please check out the past threads on the subject.  this has been discussed fully.
    regards.

  • How to copy line item details in Service PO from service contract

    Hi Team,
    i am using service contract with account assignment U and when i am creating a PO with reference of contract then in PO at Item Overview is coming data ok, but at item details in services there is not picking data automatically from contract.
    whats wrong in my scenario.

    Hi,
    Please make sure that you follow the following steps:
    1. Enter the contract and item number in the PO item line
    2. Click on the u201CService Selu201D icon to select the required
    services from the contract
    3. In the Pop-up screen, enter the agreement number in the
    corresponding field.
    4. Now select the required services from the contract and
    use the u201CServicesu201D icon or  the F9 key. Now save the purchase
    order with the adopted lines
    Best Regards,
    Arminda Jack

  • TS5185 I need my number deleted from imessage . I no longer have the Iphone , I switched to a different phone .

    I need my number from imessage but don't have the phone anymore , any help ?

    Okay? I asked a simple question because I wasn't understanding. I never said I wouldn't contact Apple Support only that it was a hassle. A simple question that didn't need to be answered with attitude. Have a good night and thank you for the help.

  • Creating Multiple IDOCs and Line Items based on Posting date from file

    Hi All,
    My scenario is File to IDOC(MBGMCR01)...
    Need your suggestions and help on how to go with this...
    Source file structure is
    DC61|2009-03-15|000000000001200051|00000005.00|200|0001|1234|
    DC61|2009-03-15|000000000001200363|00000001.00|300|0001|1234|
    DC61|2009-03-15|000000000001200334|00000002.00|400|0001|1234|
    DC61|2009-03-16|000000000001201145|00000001.00|200|0001|1234|
    DC61|2009-03-16|000000000001201086|00000002.00|100|0001|1234|
    DC61|2009-03-17|000000000001200051|00000003.00|200|0001|1234|
    DC61|2009-03-17|000000000001200052|00000003.00|200|0001|1234|
    DC61|2009-03-17|000000000001200053|00000003.00|200|0001|1234|
    DC61|2009-03-18|000000000001200056|00000003.00|200|0001|1234|
    And target IDOC(MBGMCR01) is
    IDOC (0u202699999)
    E1BP2017_GM_ITEM_CREATE(0u2026999999)
         Date
    For Each new Posting date(column 2) of the source a new idoc to be created and the corresponding records of each posting date to be added to E1BP2017_GM_ITEM_CREATE
    The out put for the above should be like this
    IDOC(2009-03-15)
    E1BP2017_GM_ITEM_CREATE=2009-03-15
    E1BP2017_GM_ITEM_CREATE=2009-03-15
    E1BP2017_GM_ITEM_CREATE=2009-03-15
    IDOC(2009-03-16)
    E1BP2017_GM_ITEM_CREATE=2009-03-16
    E1BP2017_GM_ITEM_CREATE=2009-03-16
    IDOC(2009-03-17)
    E1BP2017_GM_ITEM_CREATE =2009-03-17
    E1BP2017_GM_ITEM_CREATE=2009-03-17
    E1BP2017_GM_ITEM_CREATE=2009-03-17
    IDOC(2009-03-18)
    E1BP2017_GM_ITEM_CREATE=2009-03-18
    Will be thank ful if any one gives a hint....
    Thanks and regards,
    Sridhar

    I rather meant a picture of your mapping - anyways. Hope this is correct:
    Your souce structure:
    <MT_IAR>
      <IAR_Recordset>
        <IAR_Details>
          <Inv_adj_date>
        </IAR_Details>
        <IAR_Details>
          <Inv_adj_date>
        </IAR_Details>
    Than mapping should be like this:
    <Inv_adj_date>        ==> SplitbyValue        ==> IDOC
    Please confirm this doesn't work.

Maybe you are looking for