Link betweeen method and program/include

Hi people,
My question is, in which table is linked a class method and its program/include?
Say for example
Class CL_ABAP_STRING_UTILITIES
Method DEL_TRAILING_BLANKS
I know it's in program CL_ABAP_STRING_UTILITIES======CP
Include
CL_ABAP_STRING_UTILITIES======CM002
Because I've seen it in the debugging screen, but I don't know in which table does SAP take the relationship.
So, if anyone knows this I'll appreciate the answer.
Thanks ind advance.

Hello
You may have a look at table PROGDIR and class CL_OO_CLASSNAME_SERVICE.
Regards
Uwe

Similar Messages

Conference link with login and password included

Hi,
I have been trying to find a way to make Adobe Connect send meeting invitation e-mails with login and password included in the link - unfortunately to no avail.
Does anyone know, if it's at all possible to do it and if so, how it's done?
I'm still on a trial version, but I've been assured, that it shoudn't be a problem.
Thanks in advance for any hints!
Kamil

OK, I played with it and here is how I got it to work:
Appending the URL:
The URL would need to be appended with /?login=username&password=password. The "api/xml?action=" string was incorrect. I verified that this does work.
The full URL would look similar to this: http://realeyesconnect.adobeconnect.com/bestroomever/?login=myusername&password=drowssap
The login can also be done programmatically.You would need to do the following steps to get the log-in to be automatic.
Log the individual into the server:http://YourServerURL/api/xml?action=login&login=username&password=password
Should return a value of OK
Get the BREEZESESSION cookie for the user:
http://YourServerURL/api/xml?action=common-infoShould show a value similar to this:<cookie>na3breezr59qzu2pp2qy4zdm</cookie>
Log the user in to the room with the cookie:http://YourServerURL/RoomLink/?session=na3breezr59qzu2pp2qy3zdm
Guest names can also be added to the url link. These options are described here: http://help.adobe.com/en_US/connect/9.0/webservices/WS5b3ccc516d4fbf351e63e3d11a171dd2d4-7 ff4_SP1.html

Link betweeen BW and R/3

Hi All,
I want to know the steps to create a connection between the R/3 and BW. Below are the steps which I know and I am not sure how far are they correct. Could someone please have a lokk at them and let me know if they are correct. The steps below are from BW side. Do we need to do the same in r/3 side also?
1. Create RFC destination using SM59 for all the Bw clients and R/3 Clients.
2. Create Logical Systems in SPRO for all the BW and R/3 clients.
3. Creat clients and assign the logical systems to them in SCC4.
4. Creat source systems in BW using RSA1 and going to source systems.
Are these the only steps in BW? Are these in correct sequence? Do we need to do something using SU01?
Please help me in this. All the helpful answers will be highly rewarded.
Thanks,
RPK.

Hello
I am not aware about the automatic creation. Arun ! could u elobrate ?
check this,
***From a doc,
2.1 SAP R/3
2.1.1 Define Client Administration (SAP R/3)
Use
This activity allows you to change Customizing settings.
Prerequisites
You have logged on to the system in English in order to start with the installation of the Best Practices Scenario.
Procedure
Run the following activity:
SAP R/3 Role Menu : Define Client Administration (SAP R/3)
Transaction Code : SCC4
SAP R/3 Menu : Tools -> Administration -> Administration -> Client Administration -> Client Maintenance
Then carry out the following steps:
1. Choose Display -> Change.
2. Confirm the warning message Caution: The table is cross client.
3. Select your SAP R/3 client and choose Details.
4. In the Change View Clients: Details screen, activate the following settings:
• Automatic recording of changes
• Changes to Repository and cross-client Customizing allowed
• eCATT and CATT allowed.
5. Save.
6. Go back to the SAP Easy Access menu.
2.1.2 Defining a Logical System for SAP R/3 (SAP R/3)
Use
The purpose of this activity is to create a logical system for your SAP R/3 System. To enable communication between systems within your system landscape, you must
1. Define the systems as logical systems.
2. Assign the logical system for the SAP R/3 System to a client.
This enables the systems to recognize the target system as an RFC destination. If the logical system has already been created, skip this activity.
Logical systems are defined cross-client.
Procedure
Carry out the following steps:
1. Access the transaction using:
SAP R/3 Role Menu : Defining a Logical System for SAP R/3 (SAP R/3)
Transaction Code : SPRO
SAP R/3
IMG Menu : Basis Components (for R/3 Enterprisse: SAP Web Application Server) -> Application Link Enabling (ALE) -> Sending and Receiving Systems -> Logical systems -> Define Logical System
2. Choose New entries.
3. In the column Log System, enter a name for the logical system that you want to create.
4. In the column Name, enter a description of the logical system.
Log. System Name
<Logical system 2>, for example DS7CLNT723 SAP R/3 System
To designate logical systems, apply the naming convention
Users
2. In the User field, enter RFCUSER.
3. Choose Create.
4. On the Maintain User screen, enter the following data on the Tab entry screens:
Address
Last Name
Function
Logon data
User type System
Password LOGIN
Profile
Profiles SAP_ALL
 SAP_NEW
 S_BI-WX_RFC
Defaults
Logon Language EN
5. Save your entries.
Got this on SDN post, check with these.
Profiles assigned for user BWREMOTE in BW.
SAP_ALL
SAP_NEW
S_BI-WHM_RFC
S_BI-WX_RFC
S_BI-WX_RFCA
S_BW_RFC
S_IDOC_ALL
S_RFC_VERS
S_RS_ALL
S_USER_RFC
Profiles For ALEREMOTE in R/3.
B_ALE_ALL
SAP_ALL
SAP_NEW
S_BI-WHM_RFC
S_BI-WX_RFC
S_BI-WX_RFCA
S_BW_RFC
S_RFC_OCS
Best Regards....
Sankar Kumar
+91 98403 47141

DB Link working method and security issue.

Hi All,
I need some clarification how db link works.
If I am having DB link and done some DML operations. After that I have done some DML opearation on the local database. I haven't commited the data yet. Then DB Link goes down. What will happen?
In my case from local database if i am issuing
select * from emp@iasdb
then it shows updated data.
If i am connecting to target database then it shows non updated data. How it is possible?
What happen when DB Link goes down? Which database (taget / local) will keep lock of tables / rows I am updating?
Tom can you please help me.
Regards,
Pritesh.

If i am connecting to target database then it shows non updated data. How it is possible?Changes are visible only to the session doing the changes (until saved). Works even if the changes are across databases.
If remote DB goes down, this is what you get on local DB:
commit
ERROR at line 1:
ORA-02054: transaction 6.34.41922 in-doubt
ORA-02068: following severe error from REMOTE_DB
ORA-12152: TNS:unable to send break messageand if you now try to access the objects that were updated by above in-doubt transaction, you get this:
select * from t
ERROR at line 1:
ORA-01591: lock held by in-doubt distributed transaction 6.34.41922ORA-01591 lock held by in-doubt distributed transaction string
Cause: An attempt was made to access resource that is locked by a dead two-phase commit transaction that is in prepared state.
Action: The database administrator should query the PENDING_TRANS$ and related tables, and attempt to repair network connection(s) to coordinator and commit point. If timely repair is not possible, the database administrator should contact the database administrator at the commit point if known or the end user for correct outcome, or use heuristic default if given to issue a heuristic COMMIT or ABORT command to finalize the local portion of the distributed transaction.

Magic: After installing Lion on a clean HD, all accounts and programs are back

After I've erased my iMac, I did a clean install through an external USB with Lion 10.7.4. MAGIC: All former user-accounts and programs (include office) are back again.
What was happened?
I'm using iCloud and Time Mashine. A few days before, my iMac (10.7.5) had some errors, and than suddenly, it didn't start again. I've tried to reinstall from Time Mashine, but after about 60%, it had quit with an error. It might been an HD error, so I did an secure erase (with Disc Utility). After that, I booted from my USB with 10.7.4 installer and have installed Lion, restarted, and than there it was: All former user accounts and programs are back! I've thought, I has got crazy. But now, I hope, someone can explain me, what has happend.
Thanks for answers,
Elduke98

McDonney11 wrote:
Haha. My appologies, I shall 'plug' my devices as oposed to 'popping' them infuture.
No worries, it was late, I was a little loopy and having a little fun while trying to help. You just keep poppin' away!
Well we are on the same page my friend haha.
Good to hear.
I completed a fresh install of Lion on my HDD and migrated my data over with the migration assitant and all has worked well. Not flawlessly however all problems I encountered I could get past with a little thinking.
I must say the computer is running so much better now (touch wood, I dont want to post this and have my computer crash xD). No more spinning beach ball, no more waiting excessively for apps to launch. In terms of speed it appears it is now close to the way SL used to be (of course I dont expect it to be on par as Lion is a new OS which is yet to be refined).
Excellent!
In terms of battery life I cannot comment, I am yet to use the computer for a period of time on battery. I will report back when I do so, most likely in a day or so (if that).
I must recommend that if anyone is experiancing slow downs of their Mac after installing Lion, and it is obviously not Spotlight indexing to blame, that they try this. It does appear to improve general speed.
That is good for many people to know, so thank you.
I do hope Apple release updates and patches for Lion quite soon, it still has bugs in my mind.
I have no information on it, but I would bet on it.
Thanks for all of your help tjk, your a star!
Wow, those are kind words. Thank you, and you are quite welcome.

Table name for 'Program name of method' and 'Method name'

As we know, each method method contains different program name with ext. like "====CM0001" etc., Where can I find this program name of method in database tables?
Note: Program names are in REPOSRC with type as 'I' and name as "CLASS NAME======CMXYZ". But here we can not decide with program name belongs to which class!
Thanks,
Naveen.I

Use FM SEO_CLASS_GET_METHOD_INCLUDES. Provide your class name and you will get the method names with include name.
Regards,
Naimesh Patel

Recently, I updated to Firefox 4.0.1, and the new version disabled several of my programs, including my anti-virus. How can I go back to the previous version of Firefox?

I want to go back to the previous version of Firefox, because the new version (4.0.1 I think) that I downloaded disabled several of my programs, including my anti-virus program, because they were incompatible with the new version of Firefox. How do I get back to the previous version of Firefox and re-enable the disabled programs?

* [/questions/777886]
Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
You can use the Filter bar at to top of the about:config page to locate a pref more easily.

My computer crashed necessitating re-install of op sys and all programs including iTunes. At the iTunes store when I click a song in my library get error message "can't find, do you want to search?" What's happening? How can I listen to my library on this

My computer crashed necessitating re-install of operating sys and all programs including iTunes. When I click on a song in my library I get an error message "can't find this song, want to search?" What gives? How can I listen to songs in my library on this computer now?

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

I have been unable to download adobe acrobat pro, which I purchased on a month to month basis almost exactly 1 year ago, since I purchased it. I just received a renewal email and it had a link to download the program and for the first time when I clicked

I have been unable to download adobe acrobat pro, which I purchased on a month to month basis almost exactly 1 year ago, since I purchased it. I just received a renewal email and it had a link to download the program and for the first time when I clicked on the link it actually sent me to a page that had the icon to download now. I clicked on that, but when I went to open the file and start downloading after about 3 minutes into downloading it says an error had occurred. Can anyone help me?

I am a little worried. If you are an existing subscriber why would Adobe need you to download... I wonder if the message is a fake.
I'm not clear, if you've had it for a year, whether you need to download, or you are just following the email?
This page with the icon to download now. Was it a page on adobe.com ?

Hi. I recently got a new computer and transferred all my files across using TimeMachine. Whenever I try to sign into any CC program (including CC) the program instantly shuts down and an Apple error message comes up. I have uninstalled and reinstalled CC

Hi. I recently got a new computer and transferred all my files across using TimeMachine. Whenever I try to sign into any CC program (including CC) the program instantly shuts down and an Apple error message comes up. I have uninstalled and reinstalled CC twice with no avail and deleted every Adobe product on my computer and nothing is working.

I have seen similar discussions before... transferring does not work, you must install
Discussions of RE-installing
-http://forums.adobe.com/thread/1408331?tstart=0
-http://forums.adobe.com/thread/1398961?tstart=0
-and http://helpx.adobe.com/creative-cloud/help/install-apps.html
-using the cleaner after uninstalling and before reinstalling will usually help
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Adobe reader X and XI search don´t find text like other programs including adobe reader 9? Thanks

Adobe reader X and XI search don´t find text like other programs including adobe reader 9? Thanks

You mean, you are trying to search text in a PDF file, and you can do it in Reader 9 but not in later versions of Reader (using the same file)?

HT4539 My downloads are incomplete, in some cases only 30 seconds per episode. completely shut down computer and programs. Is there a real human to talk to?? Tech person nice but referrals to links too complicated. THX

Easy way to fix this download problem. Tech person nice but referrals to links WAY too complicated. I just want to easily load program I paid for.
My downloads are incomplete, in some cases only 30 seconds per episode. completely shut down computer and programs to try to remedy.
Is there a real human to talk to at Itunes who won't say your warrenty is over so I can't help you?? THX

Easy way to fix this download problem. Tech person nice but referrals to links WAY too complicated. I just want to easily load program I paid for.
My downloads are incomplete, in some cases only 30 seconds per episode. completely shut down computer and programs to try to remedy.
Is there a real human to talk to at Itunes who won't say your warrenty is over so I can't help you?? THX

Sample Program Using Method And Constructor

Pls. help me... pls. post just a simple running program... that uses a method and constructor getter and setter..... my program doesn't do anything
public class Attraction{
     public int minutes;
     public Attraction(){
          minutes = 75;}
     public Attraction(int m){
          minutes = m;}
     public int getMinutes(){
          System.out.println("Reading an attraction's minutes...");
          return minutes;}
     public void setMinutes(int m){
          System.out.println("Writing an attraction's minutes...");
          minutes = 7;}
}

public class Attraction{
     public int minutes;
     public Attraction(){
          minutes = 75;}
     public Attraction(int m){
          minutes = m;}
     public int getMinutes(){
System.out.println("Reading an attraction's
s minutes...");
          return minutes;}
     public void setMinutes(int m){
System.out.println("Writing an attraction's
s minutes...");
          minutes = 7;}
//new code added
public static void main(String arg[]){
Attraction att=new Attraction();
att.setMinutes(14);
att.getMinutes();
}

Difference between Session method and call transaction

Hi,
please give me the differences between session method and call transaction,
briefly explaining synchronus , asynchronus, process, update.
Thanks in advance

Hi Vijay Kumar
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Check the following links:
http://www.sap-img.com/bdc.htm
See below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.
Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.
Reward points,
Shakir

Fields missing in MPD report after change to structure and program

I have been working on a consistency report for transaction MPD.
I had created a structure in SE11 for handling the data. it was all working, but then i had to go and change the name of the fields in the structure. Now those fields are missing from the report.
When i step through the debugger, all the fields are being populated correctly, but these fields are not displayed on screen. if i change the field names back in the structure and change the code for populating these fields, they appear okay.
i have created a custom implementation within BAdi MPD_WKB_REPORTING.
i have checked the config and it all points to my Z Structure and Z Table Type. I have logged off and logged back on! made sure my code is saved and activated...
any ideas on how i can display these new fields names/values?
Just for clarity, the field name has changed. not the linked data type.

thanks for your response, however those notes and program have not done anything to assist my issue.
i have found the anwser now!
within the BAdi was a method i had to amend: IF_EX_MPD_WKB_REPORTING~GET_ALV_PARAMETERS
all fixed now!

Link betweeen method and program/include

Similar Messages

Maybe you are looking for