Fields missing in MPD report after change to structure and program

I have been working on a consistency report for transaction MPD.
I had created a structure in SE11 for handling the data. it was all working, but then i had to go and change the name of the fields in the structure. Now those fields are missing from the report.
When i step through the debugger, all the fields are being populated correctly, but these fields are not displayed on screen. if i change the field names back in the structure and change the code for populating these fields, they appear okay.
i have created a custom implementation within BAdi MPD_WKB_REPORTING.
i have checked the config and it all points to my Z Structure and Z Table Type. I have logged off and logged back on! made sure my code is saved and activated...
any ideas on how i can display these new fields names/values?
Just for clarity, the field name has changed. not the linked data type.

thanks for your response, however those notes and program have not done anything to assist my issue.
i have found the anwser now!
within the BAdi was a method i had to amend: IF_EX_MPD_WKB_REPORTING~GET_ALV_PARAMETERS
all fixed now!

Similar Messages

How can I change my original security questions? After changing my AppleID and password, I am not given an opportunity to change my security questions, which I cannot remember the answers to, so I cannot purchase any music.

How can I change my original security questions? After changing my AppleID and password, I am not given an opportunity to change my security questions, which I cannot remember the answers to, so I cannot purchase any music.

See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us
Call Apple Support in your country: Customer Service: Contacting Apple for support and service

I purchased field runners for iPad, but after I backed up and updated to ios5, I could not find it

I purchased field runners for iPad, but after I backed up and updated to ios5.01, I could not find it and when I went to the apps store, it shows that I have to purchase it. What do I do? Tks

Contact iTunes
http://www.apple.com/support/itunes/contact/

Refreshing Word Reports after changes made in Publisher.

I am runing the word to publisher to bi answers chain. I made a change to the reports in bi answers by adding a column. The new column does not show up as a selection in Word Insert>Field Menu.
When I view the publisher Xml of the report the columns for the report are there. But the word add-on does not seem to find them.
Also because the default columns names are conversions of the formulas from BI Answers just typing them out is not to convient. (I could still copy and paste from xml). Is there sometype of cache keeping old versions of the reports in the word add-on.

It is a shame I can't get answers points for my own questions but here seems to be the problem.
The word add-on is the problem and the inability to change the field/element names of the reports in publisher. The two go together because the word add on has a hick-up when handling long report element names. These names are long because publisher constructs it's dataxml from the formula field of BI Answers reports. Not the header field or some other alias. So if the formula field of a data metric, combines multiple pieces of data, then does some math, and divides itself by another hodge podge of fields you have a chance that the word add on will not find the field in its "insert>Field>Menu box". I have a feeling that it is there but not in the menu box I just haven't had a chance to check. I will update the post when I do.
Short Answer the word add on is buggy.
Side note to get the field list to reload you have log off and log on in the word add on. If not the field list will not reload.

Data missing in scheduled report via email as pdf and excel

Hi,
I scheduled a webi report to email as pdf and excel, I am getting the mail but on pdf and excel only I can see the report header, values are missing
Regards
Aflal

how come?
do you have any parameters in this report?
can you tell exactly the steps u r following doing
thanks
Amr

Activation after changes in structure with errors.

hi all,
I have a Z- Structure which is included in a transparent Z- table.
I made some changes in the data element of one of the structure fields, (Changed from Char to NUMC ), now when i activate the structure it shows an error , saying " Alter table not possible on the table.....".
Any idea how to proceed from here, is there some other way to change and activate all the dependent tables.
All answers will be appreciated.

Hi,
You need to go to the tables which are using this structure and then use Data Base Utility ( T code Se14 ) to adjust and activate the database tables.
Also make sure that the programs which are using dependent tables are also changed accordingly and this activity is done some time when system is not being used much.
Hope this helps!!
Regards,
Lalit

Password incorrect after changing it over and over can't buy a thing

Every time I change my password, i get ID or Password incorrect when trying to buy on itunes. Then I change it again and get the same message.

The only way to resolve otherwise inexplicable apple ID issues is to talk with AppleCare. You can get support fastest by using the expresslane: https://expresslane.apple.com/Issues.action
Choose "Lost or forgotten Apple ID password" and then explain your issue (copy and paste your first post), then enter your country. It should be straightforward from there.
I usually have issues resolved in 30 minutes or less.

Change in structure of program in future.

Hi All,
I have a requirement from the client.
Currently a program of study has duration of 3 years.
but in future after 2 or 3 years the same program of study will be restructured, and will be having duration 4 years.
What should I do, so that in future when this program of study is restructured, student associated with previous structure would use the old structure and the new student who takes this program of study (new structure), would use this new structure.
All the processes associated with old student should use the old structure as well.
Please suggest a solution.
Regards..
Sudhir

Hello Everyone,
I read all postings and the solution seemed quite functional. But we are facing a complicated version of this situation. Let me explain;
Our client has 4 different colleges and 16 different programs of study for undergraduate studies. Thus, at the beginning, we have 16 different program plans stated. But it is foreseen that (with former experiences) there are goning to be some changes in the program plans. For example a student (stu. X) entered school in 2006. He/She has to complete 140 CRH and is still a student. Another student (stu. Y) entered the school in 2009 and because of the change in courses and total credits he/she has to complete 130 CRH. In order to make things more difficult, a course(course A) which was offered in the second semester (we assume that total studying time is 8 semesters - 4 years) is replaced by another course (course B). In the old curriculum course A was offered in the second semester but now in the seventh semester, in the old curriculum course B was offered in seventh semester but now in second semester. Stu. X had completed the course A but because of replacement, his credits earned from course A was deleted. (actually it is not that difficult to solve a single problem for just one student and for just one course)
It is strongly forseen that we are going to be facing situations like this even more difficult ones. So we need to find a way to manage the changes in curriculum and assigning those different curriculums to different students. We thought of creating different SC objects but we assume that we are going to have 2 or 3 different curriculums for each program of study which means we can have 30-40 different SC objects.
I would really appreciate if you can help me with this problem.
King Regards,
Kerem

Data access in reports after changing Member Access profile

Hi All
I made changes in the member access profile of a user (while current system was available for User Planning).
After making and applying these changes in Access profile, the Current view in the report accessible to user got updated.
But the problem was in reporting, where the updates didnot happen.
Please suggest for necessary steps so that user get updated report as per change in Member access profile.
Thanks in advance.
Regards
Abhishek

Hi Lokesh
Thanks for the reply.
1. Report is based on CV
2. With another ID assigned to same member access profile, the report is showing complete data.
I mean with X user id 100 data sets are showing while with Y user id only 95 data sets. Where both X and Y are having same Member Access Profiles.
Regards
Abhishek

Missing +x perm error after changed Dovecot partition-default

failed: Permission denied (euid=214(_dovecot) egid=6(mail) missing +x perm: /Volumes/PEGASUS, dir owned by 0:0 mode=0770)
This after I changed the imap:partition-default location to a directory on an external volume.
I reviewed permission on the default location of the Server OS volume. Used chown and chgrp to match user and group permissions.
The server works when I revert imap:partion-default to /Library/Server/Mail/Data/mail
What is the "missing +x perm"? and the command to apply it?
I'm thinking I need to "touch" the directory but need clarification.

Started fresh. I recreated a directory at the root of the external volume. I created this directory as sudo via CLI. Set the permissions as _dovecot:mail with 775.
Then I stopped Mail service via CLI. Then updated my config to point to the new directory via CLI. Then started Mail service via CLI. Verified mail_location using doveconf -n command. It was pointing to the new location. Then initiated IMAP reception of email.
Same error message. Error occurs when mail attempts to initialize the user's mail directory: (I changed identity details within the snippet)
imap(pid 75337 user myuser): Error: user myuser: Initialization failed: Initializing mail storage from mail_location setting failed: stat(/Volumes/PEGASUS/mailarchive/mail/6622A4BF-F9FE-4F8D-8EBB-9D080FF614FD) failed: Permission denied (euid=214(_dovecot) egid=6(mail) missing +x perm: /Volumes/PEGASUS, dir owned by 0:0 mode=0770)
Jan 22 14:09:30 server.myclient.com log[75283]: imap(pid 75337 user myuser): Error: Invalid user settings. Refer to server log for more information.
So then I stop mail service and change the config's mail_location to original installation default (/Library/Server/Mail/Data/mail) and no permissions errors -- incoming mail goes into the user's mail folder.
Is the error specific to the volume /PEGASUS? and thus initialization cannot traverse the path -- gets stuck at the volume?
Mountain Lion Server 10.8.2 First time using Mail service.

Will vmware horizon work after change domain name and ip adress and vcenter ?

Hi
i have a question
i have to migrate all of my vmware horizon but for example my domain name is now a.com but i have to migare it to new domain b.comit means my domain name and ip adress will be change also connectios server ip adress vcenter ip adress now i want to know if my domain name and ip adress change and also all of my vm and vcenter and ... change will vmware horizon work after these changes ?
best regards
Babak

Horizon View is depended on AD and this task is not trivial.
What needs to be done depends on your setup and configuration and you will need assist from VMware Support and you should first replicate the setup in a test-environment.
// Linjo

No access with SP Designer 2010 after change to FBA and Windows at the same time - Does this work with SP 2013

Hi All,
It seems you can't use SharePoint Designer 2010 to open a site if you have both forms and Windows Auth selected.
Is there any way around this if i want to use the 2 at the same time?
How does this work with SharePoint 2013 as i would be doing some migrations?
Cheers in Advance

Hi,
As I understand, you encountered the issue after you selected both FBA and Windows Authentication at the same time.
As I test, I can open the SharePoint 2010 site using FBA and Windows Authentication by SharePoint designer 2010. When you open the site first,
you will get a dropdown menu where you can choose between the 2 authentication mechanisms.
After you choose one of them, you can open the site.
https://onedrive.live.com/redir?resid=40B702A9FB117DD!136&authkey=!ABtMg5n3OtPakCg&v=3&ithint=photo%2cPNG
When I open the SharePoint 2013 site using FBA and Windows Authentication by SharePoint designer 2013, I also get
a dropdown menu where I can choose between the 2 authentication mechanisms. I can open the site after I choose one of them.
So I think there are some other reasons to cause the issue.
Check these things below:
1. Check if you have the permission to open the site in SharePoint designer (Site Permission > Permission Level in ribbon > Click the permission you belongs to > Ensure Use Remote Interfaces is selected).
2. Check if you have enabled the SharePoint designer to open the SharePoint site. (Select the web application hosting the site collection using the FBA and windows authentication >Central Administration website > General Application
Settings > SharePoint Designer > ensure Enable SharePoint Designer
is selected).
3. Is there any error when you open the site in SharePoint Designer? If there are any errors, could you please provide it here for further research?
More references:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/2a3c022c-f924-4b38-be02-5c5ac7a2927e/cannot-open-sharepoint-site-using-sharepoint-designer-2010-get-a-popup-with-4-possible-causes?forum=sharepointgeneralprevious
https://social.msdn.microsoft.com/Forums/office/en-US/19628c53-fde2-44b0-806c-64f67263c931/cant-open-sharepoint-site-with-sharepoint-designer-2010?forum=sharepointcustomizationprevious
Best regards
Sara Fan
TechNet Community Support

"Error in Process" for POs after changing Tax codes and Vendor address

All,
We are in extended classic scenario and we have 2 POs with status "Error in Process"
PO 1:
The PO was ordered with 3 line items, Confirmed, Inovoiced. Later our accoutnig team realized there should not be tax for one of the line item in the PO. So they created Credit memo and asked our purchasing dept. to change PO from Taxable to Tax except.
Now the porblem is, when PO chages to tax except in SRM, it is going to "Error in Process".
What could be the reason?
PO 2:
The PO have 10 line items and Confirmed, No invoice is generated.
Now the Purchsing want to change vendor address in the PO, they changed the vendor address in the PO.
Now the porblem is, when PO changes in SRM, it is going to "Error in Process".
I checked the RZ20 Traansaction in SRM, both POs have same errors:
Backend application errors "Indicator for GR-based invoice verification used not allowed"*
We removed 'Confirm Performance of Service/Goods Receipt' tick mark for the PO in SRM under follow on documents and it is throwing error saying it must be checked.
Did any one got this error, what i need to check for this errors?. any help?
Thanks
Rams

Hi,
Once the PO is created . Confirmation made and invoice .Tax change will not be allowed.
First reverse the Invoice.
Cancel the confirmation
then change in the P.O
Do the Confirmation and invoice it will allow
Regards
G.Ganesh Kumar

Can't make a backup after changing directory structure

Having finally seen the obvious light about restoring a backup I've found some of my directories to be messed up. Some a little and others a bunch.
My first objective is to get a directory and its sub-directoried to agree as far as total file count is concerned and I'm not getting there. I have a directory the shows a total of 1082 files. When I totaled the number of files in the sub-directories I had 1080 files. I found two files that did not belong in the directory. I removed the tags from the two files (pictures) and then removed them from the catalog but not from the hard disk. They belong to a different catalog. When I totaled the sub-directories I got 1080 which meant the two files were gone from the sub-directories. But, the directory total was still 1082 and noted that two files were not shown. WHY? If they arn't in the sub-directories why are they counted in the main directory?
If you can't check your directories this way what other way is there?

Just a note to say that I never owned version 3 of PSE : PSE2 (long gone...) then PSE4, 5,6, 10, 11.
Minocq wrote:
Can I open a new catalog and import these files without loosing these links? Or is the linking a part of the data attached to the files place in the catalog data base and will be lost on importing to the new catalog?
Very important : a catalog is like a list where information read from the files are kept : dates, file size, exif data. Then you can add many info for those files : ratings, tags, captions, notes to that list . The catalog does not contain picture files : it only stores the location (path) of each file.
So, when you create a new empty catalog and 'get' media files, you are only reading your media files to extract the relevant information to be stored in the catalog (a database). Reading those files does not change anything.
When you add information in your catalog, generally nothing is written automatically into the files themselves ; however you can use the file menu to 'write metadata to files' voluntarily.
Now, if you have a catalog with already many pieces of information recorded, what will happen if you start a new catalog ? The new catalog will import all the information present in the files. The original info like exif data, plus the info you have specially 'Written to files' as stated above.
In your PSE8 version, you can work in folder view or in thumbnail view. When you have added a lot of tags, categories, ratings, captions, notes, folder view is not necessary. However, folder view enables you to take advantage of your folder organization with significant subfolder names to quickly add tags to whole subfolders at a time. It's a good way to enrich your catalog. If you still rely only on folder view to organize your categories, that is possible in the Organizer, but relying on categories, tags and albums while forgetting about folders, is the philosophy of the Organizer and its real power.
The main rule is to keep only a main catalog. Have you already tried to import most of your files in your current catalog ? How many pictures are shown ?

Windows 7 - Files missing from network share after trying to burn and no data cached to be burned

I ran into an issue trying to burn some file from a network share using Windows 7 Home Professional. I was trying to burn some .jpg files from a mapped network share drive using explorer. Every time I would drag the files to be burned from
the share drive to the explorer screen to be burned, the files would disappear from the share. To make things worse the files would not show up in the screen to be burned. I was unable to locate any of the files on either of the systems when performing
a search after this took place. I verified that the steps that I was taking to burn the files were the same as outlined on the Microsoft site. No matter what I did to burn these files, they were deleted from the mapped network drive.
Below are the steps that I took that both resulted in the files being deleted as well as what I had to do to finally burn the disc.
Steps that resulted in files being deleted:
1. Insert blank CD into drive.
2. From prompt select burn using explorer (Mastered Format)
3. Enter title and select with CD/DVD, click Next.
4. Open a second explorer window, navigate to mapped network drive with files to be burned and snap next to explorer to be burned.
5. Drag and drop the files from the share drive to CD.
This where the train would fall off the tracks every time. I would receive a message that the file(s) no longer exist and if I wanted to continue. From here the files would be deleted from the share drive. The best part is that the files
would also NOT be locally stored to be burned.
Steps to burn share files WITHOUT delete:
Follow steps outlined above, but instead of just dragging and dropping the files as outlined in step 5 select the files from the network share location, right mouse select copy. Then right mouse select paste in the explorer window to be burned.
I have tested this many times and every time ended up with the same problem. At this point I am sure that there is a problem with the way that Windows 7 is performing the burn. The system that I was using to burn is Windows 7 Home Professional
with all the patches and updates loaded. The remote system is Windows XP Professional with all the patches and updates loaded.
Thanks in advance

Yes, the problem is still continuing. However, after looking into as much of it as I can, I can confirm something that r.p.b_ started stumbling on. The files are deleted IF AND ONLY IF a user is using the built-in Windows 7 disc burning utility AND is dragging
and dropping the files to the drive from a network share; this doesn't happen locally. If you watch what happens in the native folder, the files are literally scrubbed from the drive as they are processed and added to the image. However, if you Right Click
on the files and copy them, then Right Click->Paste onto the drive, they remain. (The keyboard shortcuts also worked.) Also, 3rd party disc burning utilities function they way the should. (In other words, they don't delete the files.)
My speculation is that there's a bug in the coding that sees the network share as a temporary buffer file while the image is being prepared. Then, as the files are processed in what ever way is needed, the "temporary buffer" is being deleted. The result:
lost files on a network share. But, this is just speculation.

Fields missing in MPD report after change to structure and program

Similar Messages

Maybe you are looking for