Link to Opne Enrollment Confirmation statement
Hello,
I am on NW04s ECC6.0 and want to have the Open Enrollment Confirmation statement link on the portal in ESS...how can I add that ...
Any help would be highly appreciated.
There is WebDynpro Java application
sap.com/ess~ben/BenefitsApplication which is used for this.. you can get your changes done in same application.
To make any change in this application you need to have NWDI configuration in place.. if you need help on NWDI setup please let me know.
Hope this helps.
rgrds,
Similar Messages
-
Ess Benefits Confirmation Statement
Hello,
I am on NW04s ECC6.0 and trying to display Benefits Confirmation statement in ESS and also the Open Enrollment Benefits Confirmation statement ...and have certain questions regarding it
1) Are these Adobe or Smart Forms in the backend ?
2) Which is the ESS Application pointing to these forms.?
3) How can we make changes to these statements like changing text ,removinf fields etc.
Any help would be highly appreciated.There is WebDynpro Java application
sap.com/ess~ben/BenefitsApplication which is used for this.. you can get your changes done in same application.
To make any change in this application you need to have NWDI configuration in place.. if you need help on NWDI setup please let me know.
Hope this helps.
rgrds, -
ADS Error when opening Benefits Confirmation Statement
Hello,
I am on EP7.0 NW04s ECC6.0 and trying to open Benefits Confirmation Statement in ESS and when clicking on it I get the following error with the SAP GUI in the portal saying :
ADS : Request Start Time : Tue Oct 09 13:43:00 CDT 2007(200101)
and this is happening only for one UserId.
I wonder for the cause for this.
Any help would be highly appreciated.
Message was edited by:
SubhashTripathiHi Subhash,
Please check in your visual administrator to see whether you have <u>properly installed</u> the credential file for Reader Rights . Do this as described in "Installing and Configuring Credentials" in the Adobe Document Services Configuration Guide and note 736902.
Regards,
Shyam. -
Benefit enrollment confirmation form
Hello Expert,
Would you please tell how to check which benefit enrollment confirmation form is called from the ESS side. We see the differences in the result when called from SAP and when called from ESS.
Also could the ESS transaction be called from SAP side. If so how and whats the transaction.
Thank you very much.
saploverHi.
How solve this issue=
Kind regards -
ADS Error when trying to open Benefits Confirmation Statement
Hello,
I am on EP7.0 NW04s ECC6.0 and trying to open Benefits Confirmation Statement in ESS and when clicking on it I get the following error with the SAP GUI in the portal saying :
ADS : Request Start Time : Tue Oct 09 13:43:00 CDT 2007(200101)
and this is happening only for one UserId.
I wonder for the cause for this.
Any help would be highly appreciated.
Message was edited by:
SubhashTripathiHi Subhash,
Please check in your visual administrator to see whether you have <u>properly installed</u> the credential file for Reader Rights . Do this as described in "Installing and Configuring Credentials" in the Adobe Document Services Configuration Guide and note 736902.
Regards,
Shyam. -
Table links PO GUID and Confirmations in EBP
Hi ,
We are writting programme for Report in EBP. Please tell the Table which links the PO and Confirmation.
Thanks & Regards,
GopalHi,
You can query the tables BBP_PDHGP and BBP_PDIGP to get teh refernce doc no for PO and then use FM BBP_PD_CONF_GETDETAIL to get the details fo a particular confirmation.ALso you can search confirmations by "Reference Document", use BBP_PD_CONF_GETLIST, with parameter I_REF_DOC_NO, and then use BBP_PD_CONF_GETDETAIL for the found confirmations.
HTH.
BR,
Disha.
Pls reward points for helpful answers -
How can I send to a different URL link than what the text states in Acrobat?
Hi there
I know how to create URL links in my document using Acrobat but
How can I create a link that goes to a different URL desintation other than the one the text states?
For example
the text states
www.aaaaa.com
and I want it to state this,
but I want the link to direct to
www.aaaaa.com/abcdefghijkl
I dont want to have to create a link object, I want it to stay as text?
Is this even possible?
Any advise?
Thankstry67 wrote:
Actually, it is possible to specify your own tooltip text, if you use a
button instead of a link.
You just set the button's action to "Open a weblink" and it will act the
same as a link, but you'll have more control over how it looks and behaves.
Hi there
I cant see the term "Open a weblink". Can you advise please?
Also then how do you change the "Tooltip text" please? -
How to link Invoice Quantity and Confirmed quantity in schedule line
Hello,
I'm working for a report in BW. The user want to compare the invoice quantity to the confirmed quantity in schedule line for a sales order.
I can't find any table linking these two fields.
Could you help?
Thanks a lot
JeannieAshish,
When we link these two tables by Sales Order Number / Item, we would take following result:
Sales Order / Itme / Schedule line / confirmed quantity / actual billed quantity
1 / 10 / 1 / 3 / 5
1 / 10 / 2 / 2 / 5
But in fact, for Sales order/itm 1/10, we have only 5 PC billed, not 10.
When billed 5 PC, I want to despatch it to the Schedule line as 3, 2.
Regards,
Jeannie -
Link between Service Order / Confirmation in CRM and Purchase Order in ECC
Hi all,
Does anyone knows what the possible link is between a Service Order / Service Order Confirmation in CRM and a Purchase Order in ECC ? I heard that this could be found somewhere in the document flow of a Service Order ....
How do we get the Purchase Order number from ECC in the Document flow section of an Service Order in CRM ?
We need the PO number somehow to be able to create a Goods Received document in ECC from CRM.
BR,
AbjuhHello Abjuh,
As of CRM 4.0 (with Service Industry extensions), you can automatically create ECC Purchase Orders from a CRM service order.
It is possible to track the status of the individual service order items with the document flow.
Please refer to the SAP Help for more information.
http://help.sap.com/saphelp_crm70/helpdata/EN/46/8bae7e9e886160e10000000a1553f7/frameset.htm
Kind regards,
Kristoff. -
Error on OAB Confirmation Statement
I am hoping someone can help me with this error. When an employee makes their benefit elections in OAB, the confirmation page is displaying their total bi-weekly pre-tax deduction with trailing cents.
For example: $20.73 would appear as $20.734000
Do you know of any patches to help correct this error? Any help would be appreciated.Hi,
try below given code
DECLARE
v_statement VARCHAR2 (500);
CURSOR mov_tab_to_erp_tbsp
IS
SELECT t.table_name
FROM user_tables t
WHERE t.tablespace_name = 'SYSTEM' OR t.tablespace_name = 'USER';
BEGIN
FOR y IN mov_tab_to_erp_tbsp
LOOP
/* Build the statement */
v_statement :=
'Alter table ' || y.table_name || ' Move tablespace ERP';/* removed ';'*/
EXECUTE IMMEDIATE v_statement;
END LOOP;
END;*009* -
Links in GAF's Confirmation Step
Hi,
I have configured Confirmation Step for GAF application. How can I add links/URLs that would take me the ESS/MSS homepage, and overview screen(step 1 of GAF application)?
Thanks,
ReenaHI,
To go back to the initial screen from the confirmation screen, you can find a start over fpm event from confirmation screen.
follow these threads
[How to navigate to previous step from the "confirmation screen" in GAF|How to navigate to previous step from the "confirmation screen" in GAF]
[Restarting Initial screen using a GAF component|Restarting Initial screen using a GAF component] -
Open Enrollment Confirmation eMails
Want to see if anyone has done the following..,
Under Open Enrollment, after plan review and after SAVEing, the user has the option to Print New Plan Selection. This has the effect of displaying a .pdf file to the screen with the users elections.
I would like for that .pdf to be automatically generated and e-mailed to the person after a save. (regardless of whether or not they had pressed Print New Plan Selection.
Before I start enhancing, I thought Id check to see if anyone had already done this, and if so, where the touch points were.
Thanks
Mike
We're running :
NW 2004S, ESS 1.0 SP09 Web DynPro Version
with ECC 6.0 ERP2005 on the R/3 sideHave not done it, but it's very possible...especially if you want to clog up your network with unread emails including PDF attachments. haha (one thing to keep in mind is security concerns around sending this type of info in emails...and make sure the generated PDFs are cleared from the servers cache/temp files for the same reasons)
That "Print Confirmation" basically just goes out and pulls the configured Benefits Confirmation form. Beforer they "re-added" the feature back to the Benefits Overview service, I had to write a separate custom BSP app to allow the employee to print this at anytime. It was VERY easy.
I first called.....
CALL FUNCTION 'HR_GETEMPLOYEEDATA_FROMUSER'
EXPORTING
username = sy-uname
IMPORTING
employeenumber = pernr
countrygrouping = molga
name = ename
EXCEPTIONS
user_not_found = 1
countrygrouping_not_found = 2
OTHERS = 3.
....to get the employee tied to the user, and then after some error checking, called this....
* Next we need to print the form
* input parameter: FORM_TYPE (E=enrollment form, C=confirmation form)
* the input parameter COMMAND is important! PDF=just send data out , FDIS=display in SAPGUI, etc.
CALL FUNCTION 'HR_BEN_FORM_PRINT'
EXPORTING
PERNR = pernr
BEGDA = sy-datum
ENDDA = sy-datum
FORM_DATUM = sy-datum
FORM_TYPE = 'C'
COMMAND = 'PDF'
REACTION = 'N'
IMPORTING
PDF_TABLE = pdf_tab
PDF_FSIZE = pdf_size
SUBRC = subrc
TABLES
ERROR_TABLE = err_tab.
You could do the same but after generating the PDF attach it to an email. There are TONS of examples out on this forum for doing this. -
Certificate Authority Web Enrollment - CSP states loading
Hello,
I have setup an enterprise sub CA (the root is offline).
I have been able to issue certificates, but I did not have the Web Service, Policy Web Service or the Web Enrollment turned on.
I turned them on yesterday and when I visit the website, when I click Create and submit a request to this CA it takes to the next page where I can request a certificate. I created a duplicate template for the User Certificate and made it available.
I see it in the drop down, however under key options, CSP just says loading. I went to this site:http://support.microsoft.com/kb/939290 and followed the instructions, Active Scripting is enabled and it still
continues to state loading.
I am at a complete loss as to what the problem might be. Event logs on CA server are clean, no errors or warning.
Any suggestions?
Update: I tried to get to the site from the actual CA server and it displays the The Web site is attempting to perform a digital certificate operation on your behalf, etc...
And it populated the CSP.
I tried it from another server and it worked.
I tried it from another workstation and it shows loading in the CSP.
Has anyone run into this issue?Hi,
As this works on one of your servers, whether all your workstation have this issue?
Certificate Enrollment Web Services client computers must be computers running at least Windows 7 or Windows Server 2008 R2 operating systems. To utilize key-based renewal, client computers must be running at least Windows 8 or Windows Server 2012 operating
systems.
Please follow the below article for more details:
http://social.technet.microsoft.com/wiki/contents/articles/7734.certificate-enrollment-web-services-in-active-directory-certificate-services.aspx
Regards,
Yan Li
Regards, Yan Li -
Service GR link with Production Order confirmation
Dear PP Experts,
My scenario is like this ,
With respect to service one annual contract will be there & one release Purchase Order for one month will be there.
I want to take this service with Service GR from Service Entry sheet in a particular operation of a production order.
Is it possible to get the service entry sheet during confirmation of production order of that particular operation.
Please any one can give some idea.
Thanks & Regards
Aniruddha BiswasHi ,
It is not possible in Standard SAP . But I can give you some insight for custom development
1) Create Contract
2) PR can be created from the Prodn order with reference to contract.
3) Instead std confirmation , use the custom program for confirmation , which will carry out a)creation of the purchase order b) service entry and finally confirmation.
There is functionality in Plant Maintenance that creation of PR is possible wrt to Frame work purchase order and service entry is done for a PR directly without Purchase order. But this functionality is not avl for the prodn order.
I don't know how far this is useful for you.....
Regards
Mani -
Benefits Confirmation statement
Hello -
Is there a way to have 2 Benefit confirmation letters active and available in SAP at one time? Possibly one for active employee's and a separate one for retired employee's who still receive benefits from the company?
Thanks!There is WebDynpro Java application
sap.com/ess~ben/BenefitsApplication which is used for this.. you can get your changes done in same application.
To make any change in this application you need to have NWDI configuration in place.. if you need help on NWDI setup please let me know.
Hope this helps.
rgrds,
Maybe you are looking for
-
Is there a way to automatically align frames based on content?
Hello all, I'm fairly new to Premiere and to video in general, but I'm making a timelapse self portrait project and I'm wondering if there is a software solution to lining up the individual photos I'm using based on facial features, so essentially th
-
ORA-30937 when validating element referenced from included schema
I've boiled my latest problem down to a simple test case. Basically it seems as though the included schema is the problem, but I can't figure out why: begin dbms_xmlschema.deleteSchema('http://www.forensic.gov.uk/eMessages/Pnclink/NDNA/testinclude.xs
-
Adobe presenter ads in not present in PowerPoint 2013
I am trying to use Adobe Presenter trough PowerPoint 2013, but it is missing from menu bar. How can get it?
-
CX_AI_SYSTEM_FAULT : SOAP:1.023 SRT
Hello Experts -We have been facing below issue in Solution manager 7.1 SP08 - Managed system configuration - Extractor setup CX_AI_SYSTEM_FAULT : SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the res
-
BAPI for Pricing condition record to transaction MEk1
Hi Experts, I am facing problem to find out the BAPI or function module to create the condition record for transaction MEK1.Please let me know asap. Richard.