Linksys Connection Loss

Hi... first time posting.. anyway.. i have a linksys router.. the generic one they sell at walmart... you know.. the WG.. im too drunk to get the name from downstairs(wireless G, two antennas)... anyway.. it constantly loses the internet.. it will sometimes show that i have limited access.. although, most of the time when it messes up it shows nothing... i can go to windows mobility center (vista) and disable and enable my wireless card a few times.. and eventually, it will show there is an internet connection.. (because there is), i just wonder... why does it lose the ability to detect and use my dsl connection? .. sometimes if something (my ps3 or my computer) terminates weird (im lazy, turn it off with the 7 second kill or the dreaded try to used two devices at once... ) it will sometimes go into.. well... i can only describe it as a 'state' which it cannot find the internet.. after a while (and some serious messing around with it) it can find the internet and connect... sometimes tho.. i have to reset it to default to make it work... and it only works after i try repeated connections to it on my laptop.. (i know this because ive done it... alot) whats wrong.. and how can i make it keep a good internet connection all the time.. regardless of whats connecting disconnecting from it...? Any insight would be appreciated.

My Router WRT54G just started losing it's Internet connection yesterday for no appearent reason. Local network works but cannot connect to Internet via Cable Modem.
Direct connection via Cable modem connects to Internet. Cable Provider reports connection to both Cable Modem and Router Okay.
Wireless and Wired connection via Router fails. Multable computerers and devices wireless including Xbox and PS3 (both off when internet lost).
Powering down both does NOT reastablish connection.
Returning to "Factory Defualt" does restore connection.
Today, connection was fixed with "Restoring a saved Configuration". Less hassel as configurations do not need to be changed with this.
I would like to find the cause and a permanant fix before the kids lynch the 'System Administrator' (me) when they loss the Internet.

Similar Messages

Windows server 2012 and windows xp remote desktop connection loss

I am having this problem for a month now, and i am stumped with trying to find an answer . I have talked with several network admins in my area and with no luck i have not found a solution. I have a windows server 2012 placed with 5 pcs that are connected
on a local network , those 5 pc's connect to the server via remote desktop. List of pc's:
1x Windows 7
4x Windows XP SP3
All have the latests network drivers, all have the latest version of remote desktop installed. All have been scanned for viruses. All have antivirus software.
Problem is the 4 XP machines lose connection on when connected via remote desktop. If one starts losing connection the other 3 start to lose the connection aswell. The windows 7 machine is not affected by this it works fine.
What have I tried:
Scanning for viruses.
Disabling Firewall and antivirus software.
Updating all drivers.
Did many changes to group policy like keepalives etc.
Turning off SMBv2 SMBv3.
Turning off network adapter Offload settings.
Changed some registry settings like keepalive, smb etc.
Updating every pc and server with all windows updates.
Changed the router and switch.
Port forwarded needed ports like 3389.
Updating remote desktop to 7.0.
I might be forgetting some stuff i will add as i remember anything.
So the thing is this. I use a Windows XP machine from my office I remotely connect to the server via the Internet and I DO NOT experience any connection loss. BUT the XP machines on the local network constantly experience connection loss via remote desktop.
I pinged every Machine from the server via CMD command PING. So when they lose connection the Packets get time outs . Packets get dropped between 1-10 packets when a connection is lost. This packet drop does not occur when using the internet or anything else.
ONLY when connected to the server via remote desktop. The packets get dropped at random intervals.
Problem is I use an XP machine and I am not experiencing any loss of connection , while the XP machines on the local network experience it , but not the windows 7 machine.
Router is ASUS RT-N53 , and switch is Dlink DES-1008D. Server is a Dell PowerEdge T110 II.
Can someone please tell me what can i do to solve this problem?

So today got some word from their office. They were using RDP from 8AM until 12PM all was working fine. Then got back after lunch about 1PM and got a few connection lost errors when they tried using RDP again. Its weird since they didn't have disconnects
in the morning, and started having them after lunch.
Also noticed, that two pc were not using RDP and were disconnected as shown in task manager. And they still got request timeouts.
Maybe this is not a remote desktop issue?
TASK MANAGER
The 2 disconnected pc's ping screens:

Connection loss SUM GUI to SL Controller

Hi experts,
I am experiencing an issue that I need to resolve. It is that I lose the connection from SUM GUI (locally) to the SL Controller running on the remote server.
Currently I am doing an upgrade and after some time, e.g. when I have an error and don't notice it immediately, I get a warning message.
"The connection to the SL Controller is down.
The SDT GUI will reestablish the connection, when possible."
On the server I get the following error message:
May 26, 2014 7:49:47 AM [Error]: com.sap.sdt.engine.core.communication.FactoryAlreadyRegisteredException: Factory for key 'com.sap.sdt.engine.core.com
munication.FactoryKey@13c2c5f4' is already registered.
May 26, 2014 7:49:47 AM [Error]: com.sap.sdt.engine.core.communication.FactoryAlreadyRegisteredException: Factory for key 'com.sap.sdt.engine.core.com
munication.FactoryKey@13c2c5f4' is already registered.
May 26, 2014 7:49:47 AM [Error]: com.sap.sdt.server.core.ServerException
May 26, 2014 7:49:51 AM [Warning]: Connection has been shutdown: javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
May 26, 2014 7:49:51 AM [Warning]: Error while closing connection.
May 26, 2014 7:49:51 AM [Error]: com.sap.sdt.engine.core.communication.SendException: Error while sending data.
Network input/output exception has occurred: Connection has been shutdown: javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
java.net.SocketException: Broken pipe
May 26, 2014 7:49:51 AM [Error]: com.sap.sdt.engine.core.communication.SendException: Error while sending data.
Network input/output exception has occurred: Connection has been shutdown: javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
javax.net.ssl.SSLException: java.net.SocketException: Broken pipe
java.net.SocketException: Broken pipe
My current assumption is that the firewall drops the connection due to inactivity.
The main issue then is:
although I restart my local SUM GUI and reconnect to the server I can't continue the upgrade because the Buttons are "unclickable" (grey).
Currently I always had to restart SUM including the services on ther server (SL controller).
My question is:
what can I do to avoid this connection loss?
Is there a option to set a "keep alive" to the network connection?
so that the firewall does not validate the connection as idle and drops?
Unfortunately we can't do much about the firewall settings due to security restrictions.
I would be glad to hear from you.
Kind regards,
Niklas

Hi Mathias,
I got an answer from SAP. There is no option that can be executed with STARTUP to solve this.
I already proposed to forward this request to the dev team at SAP
What I am currently doing is:
Start the GUI and keep it open only if I know if there is are Actions coming next, otherwise I close it (only the GUI) and when some time has passed by I logon again to check.
This is a really bad solution, but currently the only one.
Regards,
Niklas

Linksys Connect CD/Downloadable Software compatibility problem with Mac OSX 10.4.11

I purchased a Linksys E1200 and I am running Mac OSX 10.4.11. As I have a G4 eMac, I cannot run a higher operating software. The CD that came with the E1200 will not launch the Linksys Connect software, as it is not compatible with Mac OSX 10.4.11. When I download Linksys Connect software from the support section of the Linksys site (version 1 or 2), same problem. I have read that I can use the E1200 with Mac OSX 10.4.11, but how? Getting very frustrated and would appreciate any practical advice/help. Thanks!
Solved!
Go to Solution.

Hi bassist71,
You may actually do the setup manually. It's done by accessing the setup page of the route through 192.168.1.1 and configuring the settings according to your Internet connection type. If you have a Cable connection, you may check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r... If you have a DSL connection, check this out, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=9017a6f6bece444dbb4a0746eb87682a_2210.xml&pid=80&r...

Re-installing Linksys Connect on laptop after new hard drive installed

I have a E4200 router and had Connect loaded on my laptop. My hard drive crashed and needed replacement. I had no problem signing on to my WiFi once I got the new hard drive installed.
With the new hard drive, I now do not have Linksys Connect installed on my laptop. My question is: Can I re-install Connect with the router running perfectly well or will re-installing Connect with the router already up and running cause me problems?
Thanks for any help.
Solved!
Go to Solution.

Here is an article on setting up the software after the router was already set up.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=90fabd0b3674497489d42...

Why do I have Intermittent Wifi Connection Loss during music streaming ?

Hello,
I have an ipad3 and an iPhone 4S and I am getting with both devices interruption of the sound when I send music to the Apple TV. It generally happens after a few minutes. The signal for the wifi is still good and I have still access to the Internet I have tried all the recommendations of the article "iOS: Troubleshooting Wi-Fi networks and connections" but this did not help. I have used several applications for sending music to the Apple TV (music application from Apple and DSAudio from Synology) but I'm getting the same issue. I have also the same issue with the media center application from Bouygues Telecom connecting directly to my internet router. My router is a bbox sensation. I had also the same kind of issue with my old router when sensing photo albums to the internet: I had the error message "your system is running low on ressources". How can I solve these intermittent wifi connection losses ?

Try #5.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Inconvenient Feature in Linksys Connect

I found a very annoying "feature" in Linksys Connect...
When I set up my Router, I wanted a relatively LONG password for my wireless WPA2 / AES configuration
but wanted a relatively short easy to use password for for browser access (192.168.1.1) ... I think that the reasoning is obvious.
In most cases once you set the WPA2 password, you do not have to "go back" to it... but the "human" access to the Browser utility will usually mean a shorter password.
When I first set up my E1200, I was able to do JUST that.. have a 26 character password for the Browser access while having a pretty hellacious looking [LONG] password for WPA2...
Unfortunately, I just found that if you then open up Linksys connect, you will get a message INSISTING that you change your Router (short) password to the Wireless (much longer) password...
This is an extremely annoying and unnecessary job step.... Has anyone else had this issue?
--Zvi

Of course that is "how the software works" -- but it seems to be a rather stupid design. In effect, the Linksys Connect feature iposes an unreasonable "rule" in its use -- making it FAR LESS user friendly than it should be. More important -- there appears to be NO logical reason for such a "rule"... and as such, it should be treated like a BUG (or a "Design Flaw") and FIXED rather than simply keeping an inconvenient "Status Quo" in place...

Connectivity loss between PLC and Kepware

Hi Experts,
I m working on SAP PCo and PLC connectivity using Kepware.
I m trying to find out ways to find connectivity loss between
1) PLC and kepware
2) kepware and PCo
For 2nd approch,if connectivity loss is there then PCo instance will go in error state and using remote monitoring we can get alert.
But m not able to find any way for 1st approch.
If PLC connection lost then only tag quality in kepware is bad.
Is there any way in PCo expression editor to check tag quality so that i can trigger MII transaction?
Thanks in advance.
Regards,
Neha

To add to Hubrisnsx's comment ... are you provisioned Ethernet or MoCA for the WAN connection?
Edit: Never mind, I see in the first post you said MoCA. So, if the MoCA channel is staying up, then it sounds like it might be something inside the ONT.
Keep in mind that while some Verizon folks do drop by these forums from time to time, that this is primarily are user to user forum where customers can help one another.

Calendar Crashes on connection loss.

Does anyone know why oracle calendar crashes when the connection to the calendar server is lost. This happens for both Mac and Windows. I am using calendar version 9.0.4.2

after much work I have discovered that this is due to power settings on the mac. if you don't turn off the hardrive it seems to work better. This however doesn't explain the corruption issues due to connection loss.

Trying to detect connection loss

I have built a little telnet program which is specialized for a specific telnet supporting server... Everything works just fine except for detecting connection loss...
I am connected to the server using java.net.Socket, data is sent using java.io.PrintStream and data is received using java.io.InputStream...
I have tried having a thread running and looking if the Socket was still connected, but even after closing the server, the Socket keeps returning true when I call Socket.isConnected()... How could I detect the moment when a connection is broken, would it be because the user has a modem connection and gets disconnected or because the server shuts down or any other such reason?

You can detect a dead socket when a write to it fails.
So, you could periodically send "keep alive" messages
to know approximately when it drops.Okay, I had noticed that the PrintStream would set it's error state to true when I try to send a message and the socket is dead, but I hoped I didn't have to wait until that moment... Thanks though! You confirmed me I'll have to do it that way :P

Internet connection loss using Airport Extreme and Netgear DG843

Hello,
I am accessing internet via a Netgear DG834 router (not wifi), connected to an Airport Extreme base station. Most of the time, I can access internet through the Wifi network of the AEB without any problem. But around once a day I am experiencing connection loss and the only way I found to restore it is to reset the Netgear Router by physically unplungging it.
Both the Netgear and the AEB have up to date firmware, so I suspect some kind of problem in my setup, as I am not an expert in setting up networks.
Is it possible that using a Netgear Router connected to the AE (which is also a router if I understand correctly) could cause connection problems ?
I am at a loss, and do not even know how to describe the relevant informations of my current setup. If a kind soul could help me nonetheless, I would be very gratefull.
Mr Pedrito
Powerbook G4 Mac OS X (10.3.9)

Is it possible that using a Netgear Router connected
to the AE (which is also a router if I understand
correctly) could cause connection problems ?
Yes.
Ensure that that the AEBS is configured to not distribute IP addresses.
Also ensure that the AEBS is on a different channel to the DG834G.
iFelix

Linksys connections

I have a linksys wireless network set-up at my office. I would like to connect my mac to this wireless network. in the linksys connection window it shows me a WEP password for a mac. but when i use it my mac won't let me on the network. does anyone know how to solve this problem?

One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
Though sometimes not even that works and the HEX key must be used regardless.
AirPort: Joining an encrypted wireless network
http://docs.info.apple.com/article.html?artnum=106424
Choosing a password for networks that use Wired Equivalent Privacy (WEP)
http://docs.info.apple.com/article.html?artnum=108058
iFelix

Folders being closed upon connection loss?

The issue is that previously it would bring up an error saying that connection was lost and would still show the folders but without any contents, and it would've been possible to do a refresh when you'd have a connection, now it instantly brings to Network folder.
Update:
Previously before the OS reinstall, I've tested what's causing the CPU usage to go up so high using ProcessExplorer, and found out that explorer.exe is using too much services/libraries, mainly ntdll.dll, which is being looped constantly, i.o. ntdll.dll would be copied and copied and copied until you'd restart the process (explorer.exe)

Hello,I'm currently having an issue with a user that is often on the road and obviously it's often that connection is being lost. That person often opens a lot of folders that we have on our local file server, and as soon as his connection is lost it brings him to the "Network" folder. Any idea what could be the issue? Also CPU would rise up to a %100 in total (File explorer .exe consuming approx. 40-60% because explorer.exe has a looping ntdll.dll library being looped in its process).He uses a Dell XPS 13 ultrabook with a four core i7 processor.Before connection loss:After connection loss:
OS: 8.1 Pro (Latest updates)File server, DC&AD: Win Server 2012 R2, Folder share.
What has been tried:sfc /scannowOS reinstall
This topic first appeared in the Spiceworks Community

Old ciscoconnect or linksys connect availabe for ea6100

hi, is it possibe to install the old cisco connect or linksys connect for Ea-6100 instead of the new linksys smart wi-fi. the parental control on smart wifi linkys doesn't goes good and i prefer the old version. where can i dowload the old version thank you

I don't think it's possible to load the old Connect (Cisco/Linksys) software to the EA6100 router since the EA6100 router is pre-loaded with a Smart Wifi firmware, which is compatible with the Smart Wifi setup only.

Intermittent Connectivity Loss

Howdy Folks,
I've tried searching and haven't found anything that matches to my issue exactly so I will try my luck posting.
Issue: Intermittently (although span between instances is a rather frequent 15-30 minutes, sometimes an hour), my internet connection via ethernet (no airport configured) will suddenly drop. I will be unable to access the internet, or any services that utilize the internet.
1. My Configuration:
ISP: Comcast (New cabling installed at current location as previous cabling was destroyed).
Modem: Cisco/Linksys CM100 w/ current firmware.
Airport Config:
-WPA2 Encryption
-Auto channel selection
-Auto radio mode selection
-Connected via ethernet and DHCP (not using PPPoE) with a lease of 1 day.
-Connection Sharing: Share a Public IP Address
**Note: Under TCP/IP it shows an IP address of 98.238.X.X whereas DHCP shows IP range of 192.168.1.2-192.168.1.200.
2. Devices Generally Used with Configuration:
A) iPhone 4 (not connected when issue happens)
B) iPhone 3gs (not connected when issue happens)
C) iPad (not connected when issue happens)
D) Mac Mini that is not even out of the box.
E) Macbook Pro running 10.6.7 (not connected when issue happens)
F) 2 iMac 17" (running 10.6.7) devices connected via ethernet (airport not enabled on either machine and connected with known-good cat6 cables that I crimped myself to ensure quality)
3. Troubleshooting Done:
-Versions: Airport Utility Version 5.5.2 (552.11), TC Version 7.5.2
-Attempted directly connecting to CM100 which is working flawlessly.
-Updated Time Capsule and APU which did not have an impact as they were up to date.
-Restored my Time Capsule to factory defaults to reconfigure the wireless connection which had no impact on issue.
-Used various lengths and types of ethernet cable (CAT5, 5e, and 6) without success. I have even made a special patch cable not 10" in length to address the short distance between the modem and router.
**Note: The simple resolution is to unplug the ethernet cable from the TC or the Modem and immediately plug it back in. This is not convenient, of course, when I am in the living room watching TV and browsing on my iPad or something.
Of particular interest is that I have a Linksys WRT54G wireless router (with current firmware) that works flawlessly when connected to my CM100.
Any ideas or suggestions would be greatly appreciated so I can figure out what the cause is and resolve it
The only thing I haven't done, which I am hesitant to do as I am not too familiar with the TC, is downgrade the firmware to test the issue.

Update:
The issue just happened about 10 minutes ago.
Here is a Ping to my router:
Ping has started…
PING 192.168.1.1 (192.168.1.1): 56 data bytes
64 bytes from 192.168.1.1: icmp_seq=0 ttl=255 time=0.288 ms
64 bytes from 192.168.1.1: icmp_seq=1 ttl=255 time=0.229 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=255 time=0.221 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=255 time=0.238 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=255 time=0.232 ms
--- 192.168.1.1 ping statistics ---
5 packets transmitted, 5 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.221/0.242/0.288/0.024 ms
A ping to yahoo received nothing. It wouldn't even give me a timeout message.

Linksys Connection Loss

Similar Messages

Maybe you are looking for