Linksys WRP400: Voice line registered but number not working (not in service) (no SIP response)

Good morning everybody,
i'm experiencing a weird and frustrating problems with some Linksys WRP400 and i hope you can give me any advices.
Long story short: the Voice line on the WRP400 keeps stop working, even if it's registered on my SIP PBX. Only a reboot of the router or a shutdown no-shutdown of the line temporarily fix the issue.
Let's add some details: i've got a lot of WRP400 installed and running and not all of them have this problem. They all have the same configuration.
I've tried to workaround the issue, reducing Register Expires from 3600 to 1200, setting on Make Call Without Reg and Ans Call Without Reg, setting on Restrict Source IP and enabling a daily reboot at 05 AM. It doesn't seem to help.
When the problem occurs, if i call the voice line number i get an error "The number you have dialed is not in service" or similar. Sometimes my customers says they can make an outgoing call, while the problem is still on, but more often the line is totally mute even on the outgoing way.
On my SIP PBX i can see the number is regularly registered, with the right timing.
If i make a Wireshark sniffing on my SIP PBX, i can see some regular "Request: INVITE sip:[email protected]:5060;transport=udp, with session description" from the PBX to the router, but the router never answers.
If i reboot, the voice line re-register itself and start working again.
I attach a screenshot and the Wireshark sniffing.
I'm using the latest 2.00.32 firmware.
Have you got any advice? It's becoming an annoying problem and i'm groping in the dark.
Best regards,
Maurizio
P.S: Should i've been asking to Belkin or is this still the right place?

You're right, i'm sorry, the other one is there: https://supportforums.cisco.com/thread/2265350
Is there a way i can ask the moderators to delete this one an keep only the other one?

Similar Messages

He menu button of the ipod touch (4th generation) is not working and the service center of ipod is asking us to pay for the fixation of the said item even though it's still on warranty. this is the case number 215866894. And the service center said that t

he menu button of the ipod touch (4th generation) is not working and the service center of ipod is asking us to pay for the fixation of the said item even though it's still on warranty. this is the case number 215866894. And the service center said that they don't cover that center part of the ipod so they're asking us money before they can fix it. We bought the ipod last december 8, 2010 and we brought it to the service center last april, 2011 here in the philippines. And until now they're not fixing it because they're asking us to pay half the price of the item which is 8,040 pesos..

As advised, you need to call Apple about this.
http://support.apple.com/kb/HE57
No one here works for Apple (no one who will reply, anyway) so there's nothing anyone here can do to help you with this issue.
Good luck.

My iphone 6plus not working not charge but when i run it the first time working half an hour when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

My iphone 6plus not working not charge but when i run it the first time working half an hour when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

Hello Nadersalah,
It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPhone Repair and Service - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

I accidently turned voice over on,I've tried triple clicking the home button to bring up voice over options but doesn't work. I can't scroll down to get to Accesibility in genereal even with three fingers.

I accidently turned voice over on,I've tried triple clicking the home button to bring up voice over options but doesn't work. I can't scroll down to get to Accesibility in genereal even with three fingers.

This article can show you how to disable it through iTunes on a PC/Mac:
iOS: Configuring accessibility features

ISight not working, not found camera

I'm using macbook pro retina 2013, has just update OS X 10.9.2 (13C64), iSight not working, not found camera

lastday wrote: ... I don't know where "ScreenRecyclerDriver" come from, ...
It was created when someone installed ScreenRecycler on your system.
ScreenRecycler is a third-party add-on. ScreenRecycler system requirements show the OS X 10.8 release version is still in beta. It is possible that you have updated your Mac OS but not yet found a compatible version of ScreenRecycler.
ScreenRecycler is also mentioned in multiple other Apple Discussions problem topics including these:
Loose all logins with ScreenRecyclerDriver: Apple Support Communities
Safari won't open - crashes immediately: Apple Support Communities
Kernal Panic after mountain lion install: Apple Support Communities
Message was edited by: EZ Jim
Mac OSX 10.9

TS1362 I downloaded two cd's last night and I am un able to play some songs cause it tells me I am this computer is unauthorized to play some songs,I did what it said about going to store to get authorized and still will not work,not happy at all!

I downloaded two cd's last night and I am un able to play some songs cause it tells me I am this computer is unauthorized to play some songs,I did what it said about going to store to get authorized and still will not work,not happy at all! I NEED HELP OR MY MONEY BACK NOW!

There seems to be an occasional issue with downloads from the store. They prompt for authorization when they are in fact corrupt/incomplete in some fashion. Try deleting the problem tracks (do not hide from iTunes in the cloud), close iTunes and reopen, go to iTunes Store > Qucklinks > Purchased > Music > Not on this computer. Select a few tracks to download then click the icon that appears at the top-right of the iTunes window.. Untick the box that reads Allow simultaneous downloads. Proceed with the rest of your eligible purchases.
If you still have a problem use the Report a problem links in your account history to contact the iTunes Store support team.
tt2

After the updating firefox 5.0 the internet download manager not working (not compatible) can you explan why?

After the updating fire fox 5.0 the internet download manager not working (not compatible) can you explain why?

Add-on developers need to keep up with new versions of Firefox as they are released and update their product. Have you checked with IDM to see if they have an update for you to install? Or ask them when they are going to have an update ready for 5.0.
Another thing you could do is to install FlashGot. <br />
https://addons.mozilla.org/en-US/firefox/addon/flashgot/ <br />
http://flashgot.net/ <br />
The developer of Flashgot, Giorgio Maone, keeps his extensions compatible with versions of Firefox that are still in development - future release versions.

Linksys WRP400 Voice Configuration

Hi.
I've just purchased a Linksys WRP400 Wireless-G Broadband Router with 2 phone ports (to replace a Billion voip wireless router which has ceased to function). I'm having trouble trying to work out how to set up the voip connection to my voip provider. Firstly, I can't login into the voice screens. On first attempt at configuring the router I could see the voice screens, but couldn't see anywhere to enter the sip web address - I saw the user password box and keyed one in thinking I needed to change it from the default to unlock some additional screens. Now, when I try to view the voice screens I just get prompted for a user name and password where I've entered "admin" and the password I entered previously - which are rejected. I've since reset the device to the factory defaults but I still get prompted for the user name and password. I enter "admin"/"admin" but it still fails to get any further. I've looked in the online user guide hoping it might tell me how to reset this password but couldn't find anything. The user guide talks about entering a voice user name and password supplied by my service provider? I'm confused by this - is it talking about my broadband internet provider? My internet provider is not my voip provider. My voip provider has given me an account, user id and password, but how is the device going to confirm these details without being told the sip details? I thought the Billion config was complicated and I was hoping this device might be much simpler - but not so far. Any help would be greatly appreciated!!!!
AllanK

Clearly this is too late to help you, but since this is showing up on Google and there are about a thousand views, this answer might be helpful to another.
Once you access the Voice Admin menu and provision your device for your VoIP provider, access to the Voice menu is subsequently "Locked".
Your VoiP provider's system has set a new unique password for the Voice menu once the provisioned device has synced with your providers system.
You should be able to get that password from the control panel on you VoIP account profile under "equipment" or a call to support or an e-mail request should garner the password.
The Login will be "admin" and the password provided will get you back into Voice menu system.
You will also need this password if you want to reset the Voice features back to factory defaults. Because of this system it appears that a WRP400 cannot be unlocked by merely using the reset button.

Batch process does not work in one service, but worked in another.

Hi Fellows,
We have here a batch process with a code encrypted, that runs daily in a production environment.
Tonight this batch process did not work.
It is expected that this process runs in about 20 seconds, but tonight this process used about 3 hours and did not finished.
We checked if it was concurrency, killed some sessions and tried again, and nothing has changed.
And then someone changed the service that this process uses, it was 'bat' and changed to 'dba'. And it worked succesfully in 11 seconds.
Here is the tnsnames that the batch process uses:
bat =
(DESCRIPTION =
(LOAD_BALANCE = OFF)
(FAILOVER=ON)
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = bat)
(FAILOVER_MODE =
(BACKUP = dba)
(TYPE = NONE)
(METHOD = BASIC)
(RETRIES = 20)
(DELAY = 5)
dba =
(DESCRIPTION =
(LOAD_BALANCE = OFF)
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dba)
Do you guys know what could be the reason?
Thanks in advance.

We set the service which the app should connect.
These services are set in srvctl:
ora.cms.bat.cms1.srv ONLINE ONLINE on fastora1
ora.cms.bat.cms2.srv ONLINE ONLINE on fastora2
ora.cms.bat.cms3.srv ONLINE ONLINE on fastora3
ora.cms.bat.cs ONLINE ONLINE on fastora1
ora.cms.cms1.inst ONLINE ONLINE on fastora1
ora.cms.cms2.inst ONLINE ONLINE on fastora2
ora.cms.cms3.inst ONLINE ONLINE on fastora3
ora.cms.cmsuser.cms1.srv ONLINE ONLINE on fastora1
ora.cms.cmsuser.cms3.srv ONLINE ONLINE on fastora3
ora.cms.cmsuser.cs ONLINE ONLINE on fastora1
ora.cms.db ONLINE ONLINE on fastora1
ora.cms.dba.cms1.srv ONLINE ONLINE on fastora1
ora.cms.dba.cms2.srv ONLINE ONLINE on fastora2
ora.cms.dba.cms3.srv ONLINE ONLINE on fastora3
The batch process connects to a service [ bat ], but it hangs and don't finish. But when we change the service do dba is just pass in some seconds and finish succesfully.
Connected to DB [issr@bat ]
PAYware CMS Version 8.0 - Module : E352 Release : 000000002
Program: /cms/cmsissr/CMS/bin/issuer/mepcs352
Release: 2
PARAMETERS OK !!!
NUMBER OF PROC.: 000001
Number of transactions : +000047570
Number of parallel processes: 000001
Transactions by process: 000000000000047570
Transactions Processed: 000010000

My iTunes is refusing to work with any device I attach to my computer: iPod, iPad and iPhone. I've tried everything recommended to me by Apple, but nothing has worked, not even several uninstallments of iTunes. Help please!!

All my computer says is that it reconises that there's a iPod there but that it can't use it for some reason.
All of the solutions offered have not worked. I just want to be able to use my iTunes properly again.

Hello, Beckara.
Thank you for visiting Apple Support Communities.
I would need some clarification on the issue you are experiencing to better assist you. However, if your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If iTunes becomes unresponsive when connecting a device, try the troubleshooting steps in the article below.
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/TS3219
Cheers,
Jason H.

Hairpin forwarding not working with CCME 4 and SIP

We are a VoIP provider and we're trying to install Cisco Unified CME 4.0 for a customer. IOS is 12.4(4)XC1 on a 2811. The customer will use our SIP service as his only outgoing trunk (no on-board ISDN or FXS cards).
On our SIP service we don't support call transfer or forwarding using the "302 Temporarily Moved" SIP method, for billing reasons. The customer needs to to hairpin routing and actually have the call go entirely through his equipment.
Following instructions, we tried enabling hairpin routing by issuing the following commands:
voice service voip
allow-connections sip to sip
no supplementary-service h450.2
no supplementary-service h450.3
supplementary-service h450.12
dial-peer voice 9000 voip
no supplementary-service h450.2
no supplementary-service h450.3
supplementary-service h450.12
Despite all this, when an ephone-dn has call forwarding enabled to an external SIP number, and a call comes in through the SIP trunk, our SIP server gets a "302 moved temporarily" message. It rejects this message and the call fails.
We even tried loopback-dn routing but we still get the same result.
Is there a way to force CCME to route the call through its inside even if it's coming and going from/to the same SIP trunk?
Thank you
-Manuel

Just an update: Davey's post was very helpful as it solved our "call forwarding not working" problem. The solution was to add the "service session" command to my voip dial peers. CME now hairpins forwarded calls correctly.
What still doesn't work at all is call transfer. If I receive an external SIP call and want to transfer it to another external SIP number, I just get the "unable to transfer call" error message on the phone, and both calls are just placed on hold. So it's not a permission problem - the call can be dialled correctly. But when hitting "transfer" the second time, CME doesn't "know" how to join them together (ie. hairpinning).
Cisco TAC's replies so far have been quite strange. I've been told that CME does not support hairpinning and that this is still being developed - apparently not, because call forwarding *does* work now. I'm only missing call transfer, then I'm all set :-)
Thank you
-Manuel

T440s webcam not working; not detected in the first place

You know what's funny, this is my second laptop in a row from Lenovo that misses a piece of hardware.
I initially bought a T440p and it came without wireless! I don't mean missing driver or anything, it was actually without a physical wireless card (although the spec on the box included it); no wireless in BIOS, device manager, etc. So I returned it and decided to get a T440s this time.
Not to mention each of these orders took a whole month.
The T440s has no webcam. Again, it's in the spec of what I oredered and it says so on the box. I spent hours searching for solutions, and you know how exhausting and irritating that is.
Solutions I see are either enabling it in BIOS (under Security), in Lenovo Settings app (changing from private to normal), removing and updating driver, etc. But none works. There is no camera in Lenovo Settings app. There is none in BIOS. There is no Imaging Device in Device Manager. When I try to install the driver that I downloaded from the lenovo website, it says "No Target Module". So at the end I'm confident it's the hardware.
What are the odds. Two brand new, crappy laptops in a row. Lost faith in Lenovo already, hence sharing this shameful story with you.

Very strange, according to the MT-M lookup, it should have a camera. BTW, that last "O" in your MT-M is actually a "0" - a zero. Took a while to figure that one out.
ThinkPad T440 20B7S1DY0B
i5-4300U(2.9GHz), 4GB RAM, 128GB Solid State Drive, 14in 1600x900 LCD, Intel HD Graphics, Intel 802.11agn wireless, 1Gb Ethernet, UltraNav, Secure Chip, Camera, Win7 Pro 64
Has this machine ever been modified? LCD or screen bezel replaced?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Mouse Not Working / Not Turned On

Hello,
This week I decided to up my Linux experience. I was using Ubuntu Linux before, and I decided to step-up to something a little less... handed-to-you. Enter Arch Linux, and enter problems! I've been in the IRC all day trying to get X running (apprently, I decided to install Arch Linux on the wrong day, as the new X7 package just entered the Arch Repo). Well, I got it running, and I can log into GNOME...
...but from there, I'm stuck.
My mouse (A Logitech MX510) not only does not work in Gnome... it doesn't work anywhere in Arch! The laser does not turn on when I select Arch VIA GRUB... once selected, the thing turns off and stays off.
I was suggested to use gpm; however, that did not work, and would throw up lines of error whenever I rebooted. Then, I read to install xf86-input-mouse... but I already have that!
What am I to do! It was suggested that is was not a problem in X... to veer away from the X 7.0 malarkey that's ensueing in the forums and IRC room.
Thanks for any help. Other than not being able to do anything, Arch Linux is great! Damn fast.

# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/unimaps
# USECOLOR: use ANSI color sequences in startup messages
LOCALE=
HARDWARECLOCK="localtime"
TIMEZONE="America/Los_Angeles"
KEYMAP=us
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by hwdetect
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to disable it
MODULES=(evdev usb_storage usbhid ohci_hcd ehci_hcd uhci_hcd)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="backroom"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng !hotplug !pcmcia network netfs crond dbus hal httpd openntpd gdm alsa)
# End of file

Wake on Demand: Not working for some services, others OK

I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
Any thoughts... hints... suggestions?
One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
Thanks in advance.

I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?

Read Timeout is not working with business service in OSB 11.6

HI All,
We have set below configuration in "Http Transport Configuration" of a business service.
Read Timeout- 8
Connection Timeout - 8
Authentication - None
Proxy Serve
Follow HTTP redirects - Disable
Use Chunked Streaming Mode - Enable
Even though backend is taking more than the configured value in Read Timeout but timeout is not happening in OSB, Connection time out also not worked, when we tested with wrong backend URL.
Any help for this configuration would appreciated.
Thanks,.

Hi,
Have you invoked any Services before calling the Business Service.
If Yes, then the problem with the Invoked service.In this scenario even if you set the time out period it will not work..
If No, your request payload is high
Regards,
Kiran

Linksys WRP400: Voice line registered but number not working (not in service) (no SIP response)

Similar Messages

Maybe you are looking for