Linksys WRT350N factory products reset

When i setting this router, i press the factory product reset, then my router cannot connect to my PC. i set my PC to 192.168.1.2 but i still connect to my router. Could you help to solve this problem ??? thans b4.

Since you have resetted your router to the factory default, now you need to re-configure all the settings on your router from scratch.
Who is your ISP?
If your Internet Service Provider is Cable follow this link
If your Internet Service Provider is DSL follow this link

Similar Messages

Toshiba laptop with Atheros AR5008X won't connect to Linksys WRT350N

Please excuse the level of detail, but I believe you need a reasonably complete picture if you are to understand the problem well enough to give a complete answer.
SETUP & BACKGROUND
I have three N-compliant devices and several G-compliant devices on my network. I also have two routers, one being used an an access point. The first is a Linksys WRT350N; the second is a Linksys WRT54G. I have the G router connected as an access point so that I can reserve the N router for the N devices and achieve N speeds.
N devices:
Toshiba laptop; network adapter is Intel 4965AGN.
Toshiba laptop; network adapter is Atheros AR5008X
Lexmark Wireless printer
Router settings:
WRT350N: Security Mode WPA2 Personal; Encryption AES; Network Mode N-only; Radio Band 40MHz.
WRT54G: Security Mode WPA Personal; Encryption AES; Network Mode Mixed
The best I can recall, I set the WRT54G to WPA Personal instead of WPA2 Personal because one of the G-compliant devices did not list the WPA2 Personal setting -- but this is based on memory only.
To reserve the WRT350N for the N devices and achieve N speeds, I set the Wireless Mode to N-only and Radio Band to 40MHz., and each router broadcasts its own unique SSID. Once I set everything up, I saw a substantial increase in the link speed reported by the Toshiba Connectivity Doctor (I realize there are issues about taking these numbers at face value, but let me continue). The Toshiba Connectivity Doctor reported WRT350N link speed at 130 Mbps and everything appeared to be working well.
PROBLEM
Until recently, no problems were apparent; the Toshiba Connectivity Doctor indicated the two laptops connected to the WRT350N at 130 Mbps, the printer connected to and printed via the WRT350N, and all G devices connected through the WRT54G. Recently, however, network performance declined and the Toshiba Connectivity Doctor indicated erratic link speeds ranging from 1 Mbps to 130 Mbps.
I found through a little research that my quest to reserve the WRT350N router for N devices lacked one element: according to Linksys help for the router, setting the N Transmission Rate to anything other than Auto results in denying access to B/G clients.
I set the N Transmission Rate to 270 Mbps (the highest setting). The Linksys printer works fine and the Toshiba Connectivity Doctor indicates a solid 130 Mbps link speed for the Toshiba laptop with the Intel 4965AGN adapter card.
The other Toshiba (with the Atheros AR5008X adapter card), however, is now only able to connect to the WRT54G (the Toshiba Connectivity Doctor indicates a solid link speed of 54 Mbps to the G SSID). If I reset the WRT350N N Transmission Rate to Auto, the Toshiba with the Atheros card can once again connect to the N Router -- but the erratic link speeds and the network degradation returns also.
I have verified that the Atheros AR5008X network adapter is N-compliant. There aren't many settings on the Atheros AR5008X adapter card configuration, but I can find no documentation on the Internet for this card.
As far as I can determine, all firmware is up to date for both routers and all drivers are up to date for both adapter cards.
I'd love to know what changed in the first place, but I'm more concerned with fixing this problem. Anyone have any ideas as to how I can get the Atheros adapter card to connect to the WRT350N with the N Transmission Rate set to something other than Auto?

Atheros adapters using windows drivers wont work with N routers, ive read somewhere
Download drivers at: http://www.atheros.cz.
Updating wless adapter sometimes can affect your pc sound quality for some reason.
Best call atheros for your concern
or call Toshiba: TOSHIBA: 800-316-0920
Example of adapters with windows driver that wont work with N routers:
Atheros AR5008 Wireless Network Diver 8.0.0.279 Windows 7(32/64-bit)
Atheros AR5008 Wireless Network Diver 9.0.0.173 Windows 7(32/64-bit)
Atheros AR5008X Wireless Network Diver 7.7.0.429 Windows 2000/XP(32/64-bit)
Atheros AR5008X Wireless Network Diver 7.7.0.449 Windows Vista(32/64-bit)
Atheros AR5008X Wireless Network Diver 7.7.0.456 Windows 2000/XP(32/64-bit)
Atheros AR5008X Wireless Network Diver 7.7.0.481 Windows 2000/XP(32/64-bit)
Atheros AR5008X Wireless Network Diver 7.7.0.523 Windows 2000/XP(32/64-bit)
Atheros AR5008X Wireless Network Diver 8.0.0.279 Windows 7(32/64-bit)
Atheros AR5008X Wireless Network Diver 9.0.0.173 Windows 7(32/64-bit)
Atheros AR5xxx Series Wireless Network Driver 5.0.0.107 Windows 2000/XP
Atheros AR5xxx Series Wireless Network Driver 5.1.1.9 Windows 98SE/Me/2000/XP
Atheros AR5xxx Series Wireless Network Driver 5.3.0.35 Windows 2000/XP
Atheros AR5xxx Series Wireless Network Driver 6.0.2.75 Windows 98SE/ME/2000/XP
Atheros AR5xxx Series Wireless Network Driver 6.0.3.100 Windows 2000/XP

I have a replacement Note 3. My Vodafone SIM, which worked fine in the original, fails in the replacement. When I try to access Settings, the menu briefly flashes, then the phone reverts to the home page. Will a Factory Data Reset fix this?

Hi,
I have a Note 3 and a Vodafone SIM that are not playing well together.
The history is:
I got my Note 3 over 2 years ago. We visited Italy 2 years ago and I bought a Vodafone sim at a Vodafone outlet. Everything worked perfectly during that trip and a subsequent trip to France.
Last October, I had to replace the Note 3 because the camera was failing. I had insurance, so the insurance company sent me a refurbished Note 3. When I tried to use the SIM last December, the Note 3 had problems. When I put the SIM in and started the Note 3, the phone recognized the sim (but gave me an error that, according to Verizon, is spurious). I could make phone calls but I could not access the data network. In order to access the data network, you have to go into Settings. More Settings, Mobile Networks and set the Access Point Name.
With the replacement Note 3, I cannot access Settings. As soon as I try to access Settings (with the Vodafone SIM installed), the Settings menu appears and then immediately the home screen comes up. After working with Verizon for over an hour, I was able to get into Settings and set the access point name by booting into Safe mode. But as soon as I rebooted into 'normal' mode, Settings failed and I could not access its menu (to turn on wifi, for example). There are a couple of other apps that did the same thing - but I cannot remember which ones.
I have talked to Vodafone - they have no clue. I talked to a Samsung rep I ran into at Best Buy, he thought the Vodafone SIM might be corrupted. And now a Verizon tech I talked to last week thinks it is a firmware problem on the phone and I should do a Factory Data Reset.
Have you ever heard of this problem? What do you think might be causing it?
Thanks for your help.

On2CO, I'm glad you have reached out to us today. Thank you so much for the very detail description on what is going on with the device. Sounds like there might be an issue with an application that might be causing these issues. The reason I say that is, when the phone is in Safe Mode you are able to access the Settings screens with no issues. While in Safe Mode that does block all 3rd party applications from running on the phone. I would suggest on trying to back up the device and perform a factory reset: http://spr.ly/6-182Vuo (you would want to make sure to uncheck Automatic Restore in step 3). Once the reset is complete try to see if you can get into Settings. Then, I would recommend on adding 3rd party applications back on to the device one by one to see if we can find what app might be causing this issue. Please keep us posted if you have any further questions or concerns. KevinR_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Mac Book Pro & Linksys WRT350N Router

A few months ago I ungraded from a MacBook to a MacBook Pro. The MacBook connects to my wireless network without a problem. I can use the internet, download files, and transfer files from the other computers on the network. I have had no problems with the MacBook since day 1. (My partner has it now and still uses it on the network)
My new MacBook Pro is having all kinds of wireless network issues. It will connect when I turn it on, and stay connected to the internet. It works for most of the time with just checking mail or surfing, but it will not let me download anything. I am also not able to transfer any files from the other computers via the wireless network.
For example - I can connect to another computer, find the file, and start the transfer. It will start, then pause, start back up, the drops the signal completely and I have to turn the Mac off to get the network back up. It does the same for downloading a file from the internet.
I called Apple Support and they told me it was an issue that Linksys had to address. I contact Linksys and they walk me through all kinds of steps to configure my router. None of the changes they had me make improved the problem, all they did was cause the older MacBook to have the same lag issues. In the end Linksys support had me default all the settings.
I have read all kinds of posts but wasn't able to find and solid answer. So any help would be great. Is there a fix, or a router that will work? Thanks in advance.
I am using the following.
MacBook Pro 10.4.10
Linksys WRT350N
All default settings with WEP turned on.

I've got issues, as seen here:
http://discussions.apple.com/thread.jspa?threadID=1125663
This worked fine for a while, then started happening regularly on my MacBook 2.16GHz. I tried all the firmware updates on my WRT350N, only to find I'm already very much up to date. I'm now trying to dig up info on the "$2 download" which Apple once offered to enable "N" capability.

Base Station, Error 4 for any action, Factory settings reset didn't work

Hi all,
I decided to try my AirPort Base station (which was used by someone else before), and have changed some settings trying to make it work Now I keep getting that annoying error message with -4 error code when trying to connect to my base station, and can't make any changes whatsoever.
I have a Windows Vista OS, and an 4.1 Admin utility ( I tried to install a later version, but it kept saying I had to "install Windows XP or Vista first". (Kidding?!)
I did both a soft reset and a factory settings reset (although I don't know how I did the latter, since both pressing the resed button for 5 and 30 sec did not work. Anyway, the station's name has changed to its serial N, so I did the reset somehow
The station's IP address in the Admin Utility begins with 172. and the same IP ip address I have in my network settings. I guess I had changed the ip somehow, and that's where the problem started... Anyway, I can't enter the configuration window to change anything.
Any ideas?

Still no ideas? I can't believe there's nobody to answer this question
Well, as I said I believe the problem is the ststion's new ip address, but I don't know how to change it.
I did a full reset, but the ip address did not change, so maybe it is my laptop's setting to blame?

Hello, Can anyone out there help me? I tried updating my phone to ios 6.0 this morning and my phone did a factory default/reset. i lost hundreds of precious pictures and all my contacts. Is there anyway of recovering those items? Help please :-(

Hello, Can anyone out there help me? I tried updating my phone to ios 6.0.1 this morning and my phone did a factory default/reset. I lost hundreds of precious pictures and all my contacts. Is there any way of recovering my photos? Please Help :-(

Yes we did a back up, but it's a new computer and we can't find it anywhere on it. We had to "authorize" it through itunes, but still nothing. Thanks for the help

After factory data reset, Google calender won't sync

Have completed TWO factory data resets on HTC Thunderbolt. Once w/deleting SD Card and once without. Still cannot get the calendar to sync past 30 days! I asked Big Red about it and they told me an "in house" HTC programmer would call me. That never happened and this was two weeks ago. . Can anyone suggest how to get my calendar back?

Hi, Tweebolt!
I'm sorry you did not receive that call back! I want to see your calendar working properly for you! When you go into Settings>Accounts & Sync>Gmail/Google> are you seeing Calendar sync greyed out or checked? If greyed out I've got some tricks I want you to give a try. What I suggest is going into Settings>Account, then creating a new Gmail account (this is nothing you have to keep, we're only going to use it for five minutes). Once created, go into the Accounts & Sync, select the new account and ensure Calendar is set to sync. Then go into your Calendar application, tap Menu>Settings>ensure your real Gmail account exists and add a new event. Next, you'll go back to Account & Sync, and you should have the option to check Calendar sync under the real Gmail account. Check it to initiate the sync. After all is said and done and the sync is complete, go under Accounts & Sync and remove that fake account you set up. I've been this jump start a Gmail account countless times, and its a lot of steps but takes 5-10 minutes to complete. Keep me posted!
Thanks,
AdamE_VZW
Follow us on Twitter @VZWSupport

Re-installing Adobe PS Touch after a factory data reset

I previously purchase PS Touch for my Acer A500 Iconia tablet. After doing a factory data reset I went to the Play Store to download it again and they want to charge me another $9.99. I shouldn't have to pay for it twice. What do I need to do?

Hi,
If you are sure that you are using the same Google account you should contact Google.
You can always log in at Google Play with that account to see if it's still there and if it's still compatible with your device (minimum requirements is Android 3.1).
Check the purchase mail receipt if you are unsure about which account was used.
Thanks,
Ignacio

What exactly happens when I do a Factory data reset?

I want to revert my Xperia Active to the state where in it was how I bought it. All my added apps removed, all the default apps are reinstalled, the SD clear from any extra settings that other apps may have left behind while uninstalling. All in all I want to "reformat" it. Will Factory data reset do this?

Question 1:
Will the default apps on the Active (aka the SportyPalPro and friends) be reinstalled? I know that I can always redownload them from the market, but as i said, just like how it was bought. The Factory data reset displays a checkbox that says it would wipe out even the SD card. So what about that?
Question 2:
I followed this tutorial (http://androidforums.com/3529664-post5.html) to free up some load off my internal space. Does this have any gravity on the Factory resetting? In essence, I remapped Android to make it install the apps to SD by default.

How to reset phone to its original settings (not the Factory data reset) without erasing user data??

I DONT want to go for the Factory Data Reset option, because it deletes all the installed apps which i managed with great difficulty. Instead I tried for Settings reset, but could not find the PIN for it. I tried 0000 also 1111 but doesnt work at all. Please someone help. !!!!!!!!!!!!!!!

Update Service (SUS)http://www.sonymobile.com/gb/tools/update-service/http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exePC Companion (PCC)Bridge (for Mac)Alternatives on How to backup Xperiashttp://talk.sonymobile.com/thread/36355Don't forget to mark the Correct Answers & Helpful Answers

Droid SD & Phone Storage - Factory Data Reset?

Will doing a "Factory data reset" erase my contacts and/or photos from my phone?

None of us know. It has been going on for weeks. People are waking up to no contacts at all on their phone. But if I make changes and sync, I get a notice the sync was successful and nothing has changed.
I have contacts where no matter what I do to get their BD correct, it is always changed back to another date. Tried on the phone and sync. Tried online and save, it immediately reverts to another date. I have even attempted to delete the contact and re-add her and her daughter, birthday still changes. Frustrating the heck out of me.
So just be aware you may not get the contacts back automatically or correctly.

How to retrieve ilife/iwork pre-installed apps on my iphone 6 plus after factory setting reset.

How to retrieve ilife/iwork pre-installed apps on my iphone 6 plus after factory setting reset.

Hello arielfernan24,
You can access previously purchased or downloaded content by following the steps in this article:
Download past purchases - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

HT3728 My Airport, even after a Factory default reset, just has a rapidly flashing white light and will not boot up. What should I do?

My Airport, even after a Factory default reset, just has a rapidly flashing white light and will not boot up. What should I do?

Thanks for you response! I have had it for about 5-6 years ... don't know if that is "vintage" or not. I just got back from our local Geneis Bar and they declared it "DOA." So, I've got a new one and getting ready to install. Thanks, again!

Password reset or factory defaults reset

Hi all,
I recently bought a ironport C350 on ebay, but after receiving the unit, it turns out there is still a password present on the box and I'm unable to login.
How do I reset this password or fully reset the box to factory defaults ?
Ironport/Cisco support refuses to help me because there is no support contract on this device.
When I ask for a support contract, they refuse that too, and say that the product is going end of life by the end of this year, and thus don't want to help me anymore at all.
So far for service ...
So how do I solve my problem now ?

Hi Daan,
sorry to hear that you are unable to access the box, the reason why support can't help you with that is that all Cisco IronPort boxes are bundled with a support contract, and as this model is end of life, you cannot get support for it as well. So as Ken pointed out already, please contact the seller, if this box was sold on Ebay as a working IronPort appliance and not just as server hardware, you'd request a return and your money back, as this appliance won't be of any use that you expected.
Hope that helps,
Andreas

CAT 2950 Factory Default reset when fron button pushed

We have just started using the 2950 and have been told by two different people that if you hold the button down on the from of the switch for 3-4 seconds it does a factory reset, is this true?
Is there anyway of disabling this feature as some of our switches are in public access areas and don't want someone resetting them for us?
Thanks
Jon Hill

Hi Jon,
Thanks for writing in. You've heard correct info.
If you hold the Mode button for 10 seconds, the switch configuration is deleted and the switch reboots. This is stated at the link below.
http://www.cisco.com/en/US/products/hw/switches/ps5023/products_command_reference_chapter09186a00802127d7.html#wp1936829
The above link also gives a command to disable this feature.
Disable express setup by the command, 'no setup express'.
The following line is mentioned at the above link.
"The primary purpose of the no setup express command is to prevent someone from deleting the switch configuration by pressing the Mode button for 10 seconds."
Hope that helps.
regards
-Alok

Linksys WRT350N factory products reset

Similar Messages

Maybe you are looking for