Linux Installation issues

Dear All,
I am installing Linux Rhel 64 bit and and stuck on 27th step " START INSTANCE " details mention below.
O S = Linux Rhel 5.4 ( 64 BIT )
Database = 10 G
Log Attach of JAVA INSTANCE WORK LOG
================ >>> main =======================
INFO: sapcpe version: @(#) $Id: //bas/701_REL/src/ccm/sapstart/sapxxcpe.c#3 $ SAP
=================================================
INFO: working only on the File-List /usr/sap/SOL/SYS/exe/run/scs.lst
INFO: Try to find file table sapcpeft (default:sapcpeft)
INFO: Try to find file table in the central directory /usr/sap/SOL/SYS/exe/run/sapcpeft
INFO: Found file table: /usr/sap/SOL/SYS/exe/run/sapcpeft
=================================================
Update Local Programs (dir-sync + file-path + ln)
=================================================
Starting at 2011/08/24 10:28:57
Checking the files in the file table for copy type
INFO: file /usr/sap/SOL/SYS/exe/run/dbdb2slib.so is not existing and status -copy when file exists- is set
INFO: file /usr/sap/SOL/SYS/exe/run/dbdb4slib.so is not existing and status -copy when file exists- is set
INFO: file /usr/sap/SOL/SYS/exe/run/dbdb6slib.so is not existing and status -copy when file exists- is set
INFO: file /usr/sap/SOL/SYS/exe/run/dbinfslib.so is not existing and status -copy when file exists- is set
INFO: file /usr/sap/SOL/SYS/exe/run/libsapcrypto.so is not existing and status -copy when file exists- is set
INFO: file /usr/sap/SOL/SYS/exe/run/libsecude.so is not existing and status -copy when file exists- is set
INFO: file /usr/sap/SOL/SYS/exe/run/xdnxdaapi.so is not existing and status -copy when file exists- is set
=================================================
Working on the files from list file which is defined with parameter: list:/usr/sap/SOL/SYS/exe/run/scs.lst
=================================================
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/scs.lst -> /usr/sap/SOL/SCS01/exe/scs.lst (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/msg_server -> /usr/sap/SOL/SCS01/exe/msg_server (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/msmon -> /usr/sap/SOL/SCS01/exe/msmon (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/niping -> /usr/sap/SOL/SCS01/exe/niping (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sapstart -> /usr/sap/SOL/SCS01/exe/sapstart (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sappfpar -> /usr/sap/SOL/SCS01/exe/sappfpar (FPM:0x0)
WARNING: there is a problem to copy the file /usr/sap/SOL/SYS/exe/run/saposcol because of the user uid:0x0 of the source file
WARNING: sapcpe skip copying the file /usr/sap/SOL/SYS/exe/run/saposcol, because he is not able to set the right file mode to the target file
WARNING: please copy the file /usr/sap/SOL/SYS/exe/run/saposcol to /usr/sap/SOL/SCS01/exe/saposcol with root permissions.
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sldreg -> /usr/sap/SOL/SCS01/exe/sldreg (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sldreglib.so -> /usr/sap/SOL/SCS01/exe/sldreglib.so (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sapcpp46.so -> /usr/sap/SOL/SCS01/exe/sapcpp46.so (FPM:0x20)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/xml63d.so -> /usr/sap/SOL/SCS01/exe/xml63d.so (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/cleanipc -> /usr/sap/SOL/SCS01/exe/cleanipc (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sapmscsa -> /usr/sap/SOL/SCS01/exe/sapmscsa (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/SAPCAR -> /usr/sap/SOL/SCS01/exe/SAPCAR (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/icmbnd -> /usr/sap/SOL/SCS01/exe/icmbnd (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/enqt -> /usr/sap/SOL/SCS01/exe/enqt (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/enserver -> /usr/sap/SOL/SCS01/exe/enserver (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/enrepserver -> /usr/sap/SOL/SCS01/exe/enrepserver (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/ensmon -> /usr/sap/SOL/SCS01/exe/ensmon (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sapcpe -> /usr/sap/SOL/SCS01/exe/sapcpe (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/msclients -> /usr/sap/SOL/SCS01/exe/msclients (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/msprot -> /usr/sap/SOL/SCS01/exe/msprot (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sapstartsrv -> /usr/sap/SOL/SCS01/exe/sapstartsrv (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/jlogunzip.jar -> /usr/sap/SOL/SCS01/exe/jlogunzip.jar (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sapcontrol -> /usr/sap/SOL/SCS01/exe/sapcontrol (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sapuxuserchk -> /usr/sap/SOL/SCS01/exe/sapuxuserchk (FPM:0x1)
INFO: syncdir:>-------------------------------------
INFO: syncdir:sync global and lokal directory:servicehttp
INFO: syncdir:>-------------------------------------
INFO: syncdir:cleandir: servicehttp
INFO: syncdir:createdir: servicehttp
INFO: syncdir:updatedir: servicehttp
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/servicehttp/sapmc/frog.jar -> /usr/sap/SOL/SCS01/exe/servicehttp/sapmc/frog.jar (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/servicehttp/sapmc/sapmcswing.jar -> /usr/sap/SOL/SCS01/exe/servicehttp/sapmc/sapmcswing.jar (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/servicehttp/sapmc/sapmc.jar -> /usr/sap/SOL/SCS01/exe/servicehttp/sapmc/sapmc.jar (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/servicehttp/sapmc/soapclient.jar -> /usr/sap/SOL/SCS01/exe/servicehttp/sapmc/soapclient.jar (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/servicehttp/sapmc/sapmc.jnlp -> /usr/sap/SOL/SCS01/exe/servicehttp/sapmc/sapmc.jnlp (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/servicehttp/sapmc/sapmcsoap.jar -> /usr/sap/SOL/SCS01/exe/servicehttp/sapmc/sapmcsoap.jar (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/servicehttp/sapmc/sapmc.html -> /usr/sap/SOL/SCS01/exe/servicehttp/sapmc/sapmc.html (FPM:0x1)
INFO: syncdir:<-------------------------------------
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/lgtst -> /usr/sap/SOL/SCS01/exe/lgtst (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/ldapreg -> /usr/sap/SOL/SCS01/exe/ldapreg (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/ldappasswd -> /usr/sap/SOL/SCS01/exe/ldappasswd (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/librfcum.so -> /usr/sap/SOL/SCS01/exe/librfcum.so (FPM:0x0)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/libsapu16.so -> /usr/sap/SOL/SCS01/exe/libsapu16.so (FPM:0x20)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/libsapu16_mt.so -> /usr/sap/SOL/SCS01/exe/libsapu16_mt.so (FPM:0x20)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/libicuuc.so.30 -> /usr/sap/SOL/SCS01/exe/libicuuc.so.30 (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/libicui18n.so.30 -> /usr/sap/SOL/SCS01/exe/libicui18n.so.30 (FPM:0x1)
--- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/libicudata.so.30 -> /usr/sap/SOL/SCS01/exe/libicudata.so.30 (FPM:0x1)
Files scanned......: 42 92.76 MB
All local files, which are available and defined, are up to date. **
Required Time......: 0:00
Copy Errors detected.................: 0
Sync Errors detected.................: 0
Not copied files (UID=0) detected....: 1
Warnings detected....................: 0

LOG OF DEV_DISP
trc file: "dev_disp.new", trc level: 1, release: "701"
sysno 00
sid SOL
systemid 390 (AMD/Intel x86_64 with Linux)
relno 7010
patchlevel 0
patchno 32
intno 20020600
make: single threaded, Unicode, 64 bit, optimized
pid 16654
\Wed Aug 24 17:29:53 2011
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 16654) [dpxxdisp.c 1286]
 shared lib "dw_xml.so" version 32 successfully loaded
 shared lib "dw_xtc.so" version 32 successfully loaded
 shared lib "dw_stl.so" version 32 successfully loaded
 shared lib "dw_gui.so" version 32 successfully loaded
 shared lib "dw_mdm.so" version 32 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ram_SOL_00 <
DpShMCreate: sizeof(wp_adm) 29784 (1752)
DpShMCreate: sizeof(tm_adm) 6009216 (29896)
DpShMCreate: sizeof(wp_ca_adm) 28800 (96)
DpShMCreate: sizeof(appc_ca_adm) 9600 (96)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (2008)
DpShMCreate: sizeof(wall_adm) (40056/36728/80/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x2ba58b759000, size: 6711576)
DpShMCreate: allocated sys_adm at 0x2ba58b759000
DpShMCreate: allocated wp_adm at 0x2ba58b75b308
DpShMCreate: allocated tm_adm_list at 0x2ba58b762760
DpShMCreate: allocated tm_adm at 0x2ba58b7627c0
DpShMCreate: allocated wp_ca_adm at 0x2ba58bd1d940
DpShMCreate: allocated appc_ca_adm at 0x2ba58bd249c0
DpShMCreate: allocated comm_adm at 0x2ba58bd26f40
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x2ba58bdacc20
DpShMCreate: allocated gw_adm at 0x2ba58bdacca0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x2ba58bdaccd0
DpShMCreate: allocated wall_adm at 0x2ba58bdaccd8
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation map
<EsMap> EsMapUnamFileMapInit: Initialize the memory 1944 MB
Linux: Kernel supports shared memory disclaiming
Linux: using madvise(<pointer>, <size>, 9).
Linux: disclaiming for shared memory enabled
<ES> 485 blocks reserved for free list.
ES initialized.
Wed Aug 24 17:29:57 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1681]
***LOG Q0K=> DpMsAttach, mscon ( ram) [dpxxdisp.c 12483]
DP_FATAL_ERROR => DpMsAttach: local hostname 'ram' is resolved to loopback address (cf. SAP note 1054467 for details)
DISPATCHER EMERGENCY SHUTDOWN ***
Wed Aug 24 17:29:58 2011
increase tracelevel of WPs
kill(16811,0) successful -> process alive
killing W0-16811 (SIGUSR2)
kill(16816,0) successful -> process alive
killing W1-16816 (SIGUSR2)
kill(16884,0) successful -> process alive
killing W2-16884 (SIGUSR2)
kill(17070,0) successful -> process alive
killing W3-17070 (SIGUSR2)
kill(17104,0) successful -> process alive
killing W4-17104 (SIGUSR2)
kill(17105,0) successful -> process alive
killing W5-17105 (SIGUSR2)
kill(17106,0) successful -> process alive
killing W6-17106 (SIGUSR2)
kill(17111,0) successful -> process alive
killing W7-17111 (SIGUSR2)
kill(17112,0) successful -> process alive
killing W8-17112 (SIGUSR2)
kill(17113,0) successful -> process alive
killing W9-17113 (SIGUSR2)
kill(17114,0) successful -> process alive
killing W10-17114 (SIGUSR2)
kill(17133,0) successful -> process alive
killing W11-17133 (SIGUSR2)
kill(17134,0) successful -> process alive
killing W12-17134 (SIGUSR2)
kill(17136,0) successful -> process alive
killing W13-17136 (SIGUSR2)
kill(17137,0) successful -> process alive
killing W14-17137 (SIGUSR2)
kill(17152,0) successful -> process alive
killing W15-17152 (SIGUSR2)
kill(17155,0) successful -> process alive
killing W16-17155 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 24 17:30:08 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Aug 24 12:00:08 2011
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 16811 Run yes 0 0 0
1 DIA 16816 Run yes 0 0 0
2 DIA 16884 Run yes 0 0 0
3 DIA 17070 Run yes 0 0 0
4 DIA 17104 Run yes 0 0 0
5 DIA 17105 Run yes 0 0 0
6 DIA 17106 Run yes 0 0 0
7 DIA 17111 Run yes 0 0 0
8 DIA 17112 Run yes 0 0 0
9 DIA 17113 Run yes 0 0 0
10 UPD 17114 Run no 0 0 0
11 ENQ 17133 Run no 0 0 0
12 BTC 17134 Run yes 0 0 0
13 BTC 17136 Run no 0 0 0
14 BTC 17137 Run no 0 0 0
15 SPO 17152 Run no 0 0 0
16 UP2 17155 Run no 0 0 0
Dispatcher Queue Statistics Wed Aug 24 12:00:08 2011
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
5
5
2000
5
0
--------++++--
+
DIA
1
1
2000
1
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 6
wake_evt_udp_now 1
wake events total 6, udp 1 ( 16%), shm 5 ( 83%)
since last update total 6, udp 1 ( 16%), shm 5 ( 83%)
Dump of tm_adm structure: Wed Aug 24 12:00:08 2011
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Aug 24 12:00:08 2011
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
105
DISPATCHER
-1
WPCAAD105
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 24 17:30:13 2011
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ram_SOL_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_OFF
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 3/0 done
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 1/4096 done
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
kill(16811,0) successful -> process alive
kill(16816,0) successful -> process alive
kill(16884,0) successful -> process alive
kill(17070,0) successful -> process alive
kill(17104,0) successful -> process alive
kill(17105,0) successful -> process alive
kill(17106,0) successful -> process alive
kill(17111,0) successful -> process alive
kill(17112,0) successful -> process alive
kill(17113,0) successful -> process alive
kill(17114,0) successful -> process alive
kill(17133,0) successful -> process alive
kill(17134,0) successful -> process alive
kill(17136,0) successful -> process alive
kill(17137,0) successful -> process alive
kill(17152,0) successful -> process alive
kill(17155,0) successful -> process alive
Stop work processes
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 24 17:30:14 2011
NiISelect: TIMEOUT occured (1000ms)
wait for end of exclusive shutdown
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 24 17:30:15 2011
NiISelect: TIMEOUT occured (1000ms)
kill(16811,0) successful -> process alive
kill(16816,0) successful -> process alive
kill(16884,0) successful -> process alive
kill(17070,0) successful -> process alive
kill(17104,0) successful -> process alive
kill(17105,0) successful -> process alive
kill(17106,0) successful -> process alive
kill(17111,0) successful -> process alive
kill(17112,0) successful -> process alive
kill(17113,0) successful -> process alive
kill(17114,0) successful -> process alive
kill(17133,0) successful -> process alive
kill(17134,0) successful -> process alive
kill(17136,0) successful -> process alive
kill(17137,0) successful -> process alive
kill(17152,0) successful -> process alive
kill(17155,0) successful -> process alive
wait for end of exclusive shutdown
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 24 17:30:16 2011
NiISelect: TIMEOUT occured (1000ms)
Good Bye .....

Similar Messages

Content Server Linux Installation Issue

Hi,
After installing Linux Contentserver and accessing same I am getting following error I am using Apache weserver as part of Oracle application server 10.1.2.0.2.
http://myhost:4444/idc/ ContentServer
http://myhost:4440/idc/ Admin Server
Network message format error. Unable to parse browser environment or content item. Unable to parse properties. Name-value pairs are missing an '='.
Need help to resolve this.
Regards,
Jigar

Hi,
i've setup 10.3.1.0 version of Webserver and also Universal Content Management server's content server.
When i try to load the main page with http://myhostname/idc/, it fails to load but when i login to webserver main page using http://myhostname:7777/, it can load.
Can anyone help me on this?
config.config
<?cfg jcharset="UTF8"?>
#Content Server System Properties
IDC_Name=idc
IdcProductName=idccs
SystemLocale=English-US
InstanceMenuLabel=idc
InstanceDescription=Content Server idc
SocketHostAddressSecurityFilter=192.168.0.20
#Database Variables
JdbcDriver=oracle.jdbc.OracleDriver
JdbcConnectionString=jdbc:oracle:thin:@dell:1521:REPOS
JdbcUser=content
JdbcPassword=OI6UvSF4SfabkpF0YGqKmFvjUz/ZK8elZWd2ZXzfQPY=
JdbcPasswordEncoding=Intradoc
DatabasePreserveCase=1
#Internet Variables
HttpServerAddress=AS1
MailServer=mail
SysAdminAddress=sysadmin@mail
SmtpPort=25
HttpRelativeWebRoot=/idc/
CgiFileName=idcplg
UseSSL=No
WebProxyAdminServer=true
#General Option Variables
EnterpriseSearchAsDefault=0
IsJspServerEnabled=0
JspEnabledGroups=
#Additional Variables
DatabaseType=oracle
SearchIndexerEngineName=DATABASE.METADATA
WebServer=apache
IdcAdminServerPort=4440
IntradocServerPort=4444
httpd.conf
include "/oracle/product/10.1.3.1/Oracle_Web/Apache/Apache/conf/oracle_apache.conf"
LoadModule IdcApacheAuth "/oracle/ucm/server/shared/os/linux/lib/IdcApacheAuth.so"
IdcUserDB idc "/oracle/ucm/server/data/users/userdb.txt"
Alias /idc "/oracle/ucm/server/weblayout"
<Location /idc>
Order allow,deny
Allow from all
DirectoryIndex portal.htm
IdcSecurity idc
</Location>

Installation issue on opensuse 11

Hey All, Im a Windows guy still struggling with Linux set-upsso take it easy on me! :) and Im having a hard time getting blaze installed and running. This is what Ive done so far. I've successfully set-up the latest copy of openSuse11 64 bit version with: Tomcat 6.0.16 (Tested and running) ANT 1.7 JAVA SDK & JDK 6 Junit (ant-junit, junit, junit-javadoc, junit-manual, libcppunit-1_12-0) Downloaded both blazeds.war and blazeds_src_3-0-0-544.zip From Tomcat Manager I uploaded the blazeds.war file successfully. I unzipped the zip file into root/blazeds and from a command prompt ran ant. These are the errors Im getting: * [taskdef] Could no load definitions from resource net/sf/antcontrib/antcontrib.properties. It could not be found. (Repeats about a dozen times) * BUILD FAILED * /root/blazeds/build.xml:445: The following error occurred while executing this line: * /root/blazeds/resources/fds-ajax-bridge/build.xml:52 Problem: failed to create task or type if Cause: The name is undefined. * Action: Check the spelling * Action: Check that any custom tasks/types have been declared * Action: Check that any <presetdef>/<mac rodef> declarations have taken place. Variables: env | grep _HOME ANT_HOME = /usr/share/ant JRE_HOME =/usr/lib64/jvm/java/jre JAVA_HOME =/usr/lib64/jvm/java/jre SDK_HOME =/usr/lib64/jvm/java/jre JDK_HOME =/usr/lib64/jvm/java/jre Any ideas? Brad

Hi Alex,
Sorry I've been away and just got back. Presently I'm working from jrun4 and would like to use blazeds instead. Once my projects get going I would need the ability to use my customers already made linux/tomcat boxes and just plug in blaze.
I look forward to your answer.
Brad
On Fri, Aug 1, 2008 at 12:57 PM, Alex Glosband
<
[email protected]> wrote:
A new message was posted by Alex Glosband in
Configuration and Getting Started Discussion --
Installation issue on opensuse 11
Are you just trying to install and run BlazeDS? Why do you need to build from source?
-Alex
View/reply at
Installation issue on opensuse 11
Replies by email are OK.
Use the
unsubscribe form to cancel your email subscription.

Oracle 9iAS Installation Issues, Win 2000

Hi Folks,
I'm trying to Install 9IAS on a WIN2000 PE.
I already have Oracle NT Personal Edition (download nt817personal), up and running.
My Question is do I need to use Oracle nt817ee (Enterprise Edition)
Any suggestions ?
Thanks

I agree with your 5 P's, but Oracle is killing themselves by not improving the installation issues. Oracle is in a fight to the death with Microsoft, and there are a lot of people who give up on Oracle products because the learning curve is too steep just to be able to login as Scott. I have a lot of experience with Windows and Oracle, and have installed the RDBMS on probably 50 separate machines in the last several years, yet I still cringe when I double click setup.exe since I never know if universal installer is going to abort. I'm not a Unix or Linux guru, and I tried and tried to get Oracle RDBMS 8i to install on several flavors of Red Hat, but I gave up. DB2 and Interbase both installed without the hassles. Take a look at the Linux forum on Technet, and look at the effort that some people are doing to try to get it to work. It should not be this hard. I would like to use Linux/Oracle on some of our servers, but frankly it is too hard currently. You shouldn't need a metal link account to install software on a clean install of Windows, or be a guru at writing device drivers for Linux to install Oracle on that platform.

Linux installation problem on D20

Hi, guys,
I am trying to install Redhat Linux x86_64 5.3 on D20 with a Marvell 88SE63xx/64xx SAS controller. As the Linux installer cannot recognize the SAS controller, I download a driver of Marvell mv64xx for Redhat x86_64 5.2 from Lenovo driver matrix website. Unfortunately, no matter how I follow the instruction to load the driver, the so-called mv64xx doesn't drive the Marvel 88SE63xx/64xx SAS controller in D20, so that the Redhat 5.3 Linux installer cannot find any hard drive. This is ridiculous and ironic because I got 5 SAS 15rpm hard drives in D20. Does anyone know how to resolve this problem and get Redhat Linux 5.3 installed on D20 with SAS drives?
Solved!
Go to Solution.

hello, good news everyone
today i tested the upcoming kernel 2.6.31-1 with ubuntu server x64 (9.10 / karmic)
and what can i say?
[    2.536365] mvsas 0000:01:00.0: mvsas: driver version 0.8.2
[    2.536374] mvsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.536379] mvsas 0000:01:00.0: setting latency timer to 64
[    2.537283] mvsas 0000:01:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
[    7.769579] scsi7 : mvsas
[    7.769954] /build/buildd/linux-2.6.31/drivers/scsi/mvsas/mv_sas.c 380hy 2 byte dmaded.
[    7.770674] /build/buildd/linux-2.6.31/drivers/scsi/mvsas/mv_sas.c 1365:found dev[0:5] is gone.
[    7.778539] ata7.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[    7.778543] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    7.779378] ata7.00: configured for UDMA/133
[    7.779426] scsi 7:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
the kernel included the mvsas module and its dependant, and ran out of the box doing anything. and yes, it's a software raid, the bios offers raid 5 and 10, but they are greyed out. okay, my graphic is now broken with 2.6.31-1, but hey, the 5 port's are working i almost forgot where i have put the 500gb disk. hdparm -tT showed 7.8gb/s buffered and 77mb/s normal read, which is normal for the drive.
because of the nature of a module, i believe you have to compile a kernel with support of mvsas on your own to boot linux from it, or you use the ich10 - only for optical drives - sata port, which works fine with the intel x25-m ssd.
Message Edited by docc on 07-02-2009 12:06 AM

Lightroom 4.2 Installation Issue

Leaving this around in case anyone else has the same problem -- Solution found -- Windows installer issues / registry issues -- used the Microsoft Fix it tool (http://support.microsoft.com/kb/2438651#reso3) to correct. 4.2 install ran fine.
I've read through the posts in the Lightroom forum regarding LR 4.2 install issues. I will list here the things I've done to try to get the install to work:
1) Downloaded the installation software twice.
2) Ran the setup program in admin user mode.
3) Ran the install in admin user mode.
4) Get the following error in a Windows Installer window:
The feature you are trying to use is on a network resource that is unavailable.
Click ok to try again, or enter an alternate path to a folder containing the installation package 'Adobe_Lightroom_x64.msi' in the box below.
Use source:
c:\Users\RMJF\AppData\Local\Temp\{...}
What I have found (after displaying hidden AppData folder):
The location where the .msi file resides is different from the one defaulting in the above window.
I select this alternate path, but still cannot complete the installation.
Furthermore, when I cancel the install, I get this error:
Adobe Photoshop Lightroom 4.2 64-bit Installer Info
Error 1714. The older version of Adobe Photoshop Lightoom 4.2 64-bit cannot be removed. Contact your technical support group
I have been running LR since the beginning of time and most recently LR 4.1, so there is no 4.2 installed.
Also, I tried to fix the install of 4.1 via the programs in Control Panel. I cannot repair it and get this error:
The installation source for this product is not available. Verify that the source exists and that you can access it.
All versions (except the 1.0 version) were downloaded and installed from the Adobe LR site.
So, looking for suggestions.
Seems like there are some missing files from the 4.1 version that are hindering the install of 4.2???
All quite frustrating. Hope you can get me to a speedy solution.
(System info: Windows Vista 64-bit Home, SP 2, 20 GB of disk space to spare! Also, I have set the install program to be allowed by the anti-virus program. I have run a registry clean-up, as well. No other apps are running during the install.)
Message was edited by: marzo19

untill now, 3 phones later, and mayby 10 attemps later to install it: notting. the errors that i am gething are the same as above, but nothing helps for me.
even the microsoft fixid diden't help.
So also desperate.

Forms 10g Installation issue on windows 7 Professional service pack 1

hi
I am trying to install oracle forms 10g 64 bit windows 7 Professional service pack 1 ..
Below are 2 files that i am using ..
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
But it failed but the error is ..
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.1 Failed <<<<
just wondering if there are any workaround ..

Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7. You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified. You must have a My Oracle Support account to obtain the patch.
Now, to your question - is there a workaround; the answer is yes. There are known issues with this installer. I'll list them and their workaround.
1. The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
Workaround: Right-click the Installer and select Properties. Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for: Windows XP SP3).
2. The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
Workaround: You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes. See this Microsoft article for more information on changing VM settings. http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
This change will require you to restart your computer. After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
3. The Oracle installer MUST be installed as an "Administrator".
Workaround: Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab. Click the "Run this program as an administrator" checkbox.
4. Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
Run the Oracle installer and it should now install succesfully.
Craig...

HP Photosmart D7360 -- Driver/Installation issue

For some reason my HP Pavillion Laptop no longer recognizes my HP Photosmart printer. I have downloaded the drivers, I have the disk and no matter what I do, I can't get the printer driver to install.
It tells me that it can load verythign BUT the driver. Any ideas?
Thanks
jstjohn

Welcome to the forums @Pierre-Louis ,
I read about the installation issue you're having with your Photosmart C4280 on Windows 8. I have a guide that I have heard successful results from and I hope they work for your scenario as well!
Click this link to get started: A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Photoshop CS6 Installation issues

Anyone on 10.7.5 having PSCS6 installation issues after trying to apply update via Creative Cloud?

This link took me to location where I chose the appropriate version of Bridge update and it worked. My verion was updated to 5.0.1.23
http://www.adobe.com/support/downloads/product.jsp?product=108&platfor m=Windows

NWDS installation issue - "Please wait... completing the install"

Hi all,
I got the same "Problem" each time I update my NWDS.
[Re: NWDS installation issue.|Re: NWDS installation issue.]
After the installation, when I start the NWDS I get always the message:
"Please wait... completing the install"
If I create a new Workspace this really solves the problem but I don't like to create every time a new workspace after an update and copy all my projects back to this new workspace.
Is there no other solution around? I think I'm not the only one who has this troubles, am I?
Regards,
Stefan

Hi all,
I solved this problem by myself. So for everyone who is interested in how to solve this problem:
Just delete the folder .config in
\workspace\.metadata\
During the next start of NWDS this folder will be created and everything will work as excpected!
Stefan

Application Runtime Environment installation issue

Hi,
JDeveloper 11.1.1.3.0
OS: Solaris SPARC
I am trying to install the application runtime environment and I am getting the below error. Please advice me on how to resolve this issue.
JAVA Version in Solaris SPARC :
weblogic@comm1 ~/Installs $ java -version
java version "1.5.0_24"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_24-b02)
Java HotSpot(TM) Server VM (build 1.5.0_24-b02, mixed mode)
Error:
weblogic@comm1 ~/Installs $ cd Disk112/
weblogic@comm1 ~/Installs/Disk112 $ cd Disk1/
weblogic@comm1 ~/Installs/Disk112/Disk1 $ ./runInstaller
./runInstaller: /apps/wls/Installs/Disk112/Disk1/install/solaris/runInstaller: cannot execute
./runInstaller: syntax error at line 299: `count1=$' unexpected
Thanks,
Rajesh

Hi,
I have installed the jdk 64bit version and tried the application runtime environment installation but I am still getting the same old error. Here it is..
weblogic@dwlsalescomm1-c2 ~/Installs/Disk112/Disk1 $ ./runInstaller -jreLoc /apps/wls/WL10/jdk1.6.0_21/
./runInstaller: /apps/wls/Installs/Disk112/Disk1/install/solaris/runInstaller: cannot execute
./runInstaller: syntax error at line 299: `count1=$' unexpected
JDK Version:
WL10/jdk1.6.0_21/bin $ ./java -d64 -version
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b06)
Java HotSpot(TM) 64-Bit Server VM (build 17.0-b16, mixed mode)
Please advice me on how to resolve this installation issue.
Thanks,
Rajesh
Edited by: Rajesh on Mar 15, 2011 8:28 AM

Linux installer missing from Solution Accelerator 9.5 Download

The only solution accelerator download that I find at https://www.adobe.com/cfusion/entitlement/index.cfm?e=solution_accelerators is Solution_Accelerator_9_5_WWEFDJ_Win.zip.
The installation document (install_sa.pdf)) says to run the Linux installer from "/Disk1/InstData/Linux/NoVM" however when I unpacked the .zip download file I only see Windows installers.
I've installed ES 2.5 from the provided virtual appliance which is a SUSE Linux system so I require the Linux installer. Any ideas where I can find the Linux installer?

Yes, same thing happens to me, I've downloaded lc_es2_connector_for_sharepoint_9.0.0.2_v1_win_jboss.zip since I've been using the Suse Linux Appliance installed from Adobe as trial (LiveCycleES2SP2.x86_64-0.0.4).
and now I'm stuck since the 86 MB zipped file doesn't have anything to do with the Linux Virtual Appliance (eg. no linux installation files ?).

Acrobat Installation Issues due to Computer Switch

My surface bit the dust last week and I had to replace it. Downloaded acrobat successfully tot eh surface but then that apparently cut off access to the adobe pro on my home computer.
How do I get acrobat re-installed without the "you don't have a license" error message.
I am on a subscription plan
P

licensing issue-the system does not recognize that I have a license so I would love to eb able to speak with a real person so they coudl go and look at my purchase and fix the problem.
I'll be calling on Monday- right now I am using a trial version again but need to fix before the 39 days are up Peter Collopy, CSP, CIH, CHP
Damariscotta, ME518.859.1944 (cell)
From: RahulTyagi4you <[email protected]>
To: Peter Collopy <[email protected]>
Sent: Sunday, March 1, 2015 5:30 AM
Subject: Acrobat Installation Issues due to Computer Switch
Acrobat Installation Issues due to Computer Switch
created by RahulTyagi4you in Acrobat Installation & Update Issues - View the full discussionHi Peter Collopy, Is Acrobat properly installed on your system?Please confirm if you facing installation issues or licensing issues? Regards,Rahul Tyagi If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7240431#7240431 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7240431#7240431 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Adobe AIR Installation Issue

Hi,
I am facing an installation issue with AIR file on multiple machines.Though I am able to install it on some machiens.Below is the log for same.
[2011-08-05:11:56:02] Application Installer begin with version 2.7.0.19530 on Windows XP x86
[2011-08-05:11:56:02] Commandline is: E:\ASMTv3India\ASMT2011_Beta-4Aug2011\ASMT2011_Beta.air
[2011-08-05:11:56:02] Installed runtime (2.7.0.19530) located at c:\Program Files\Common Files\Adobe AIR
[2011-08-05:11:56:02] Unpackaging file:///E:/v3India/App_Beta.air to C:\Documents and Settings\Media\Local Settings\Temp\fla2D.tmp
[2011-08-05:11:56:03] Application signature verified
[2011-08-05:11:56:03] Unpackaging/validation complete
[2011-08-05:11:56:03] No app located for appID 'App2011-Beta' and pubID ''
[2011-08-05:11:56:12] Converting unpackaged application to a native installation package in C:\Documents and Settings\Media\Local Settings\Temp\fla3B.tmp
[2011-08-05:11:56:18] Native installation package creation succeeded
[2011-08-05:11:56:18] Starting app installation to C:\Program Files. Installing app ASMT2011-Beta version v3.010 using the source file at file:///E:/v3India/App_Beta.air
[2011-08-05:11:56:18] Installing msi at C:\Documents and Settings\Media\Local Settings\Temp\fla3B.tmp\setup.msi with guid {EBF346A2-FD8C-08C2-07E8-AA91ABD1CAE6}
[2011-08-05:11:56:21] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
[2011-08-05:11:56:21] Rolling back install of C:\Documents and Settings\Media\Local Settings\Temp\fla3B.tmp\setup.msi
[2011-08-05:11:56:21] Rollback complete
[2011-08-05:11:56:21] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
[2011-08-05:11:56:28] Application Installer end with exit code 7
Please do the needful.
Thanks & Regards
Vishal

Ok, I understand. So before we continue, we really need to figure out what the exact error is. Can you, on at least 2 systems, generate the MSI logs we'll need? Here's a document that explains how to enable logging and where to find the logs once they've been created:
How to enable Windows logging
Once you've enabled logging, try installing again. Grab the newly created msi logs and either post here or email me at [email protected] I'll examine the logs and see if we can find a common issue between the systems.
Thanks,
Chris

Link for Oracle-on-Linux Installation Menu

Posted on wrong forum.
Shall this be correct?
May somebody add the following link (SLES9 documentation) http://www.gesinet.it/oracle/oracleonsuse.html
to the new "Oracle-on-Linux Installation Menu
" http://www.oracle.com/technology/tech/linux/install/index.html ?
Thank you

Hi,
The Documentation Feedback forum relates only to documentation at: http://www.oracle.com/technology/documentation/index.html
Please try the Members Feedback forum at: Community Feedback (No Product Questions)
Regards,
Les

Linux Installation issues

Similar Messages

Maybe you are looking for