Content Server Linux Installation Issue

Hi,
After installing Linux Contentserver and accessing same I am getting following error I am using Apache weserver as part of Oracle application server 10.1.2.0.2.
http://myhost:4444/idc/ ContentServer
http://myhost:4440/idc/ Admin Server
Network message format error. Unable to parse browser environment or content item. Unable to parse properties. Name-value pairs are missing an '='.
Need help to resolve this.
Regards,
Jigar

Hi,
i've setup 10.3.1.0 version of Webserver and also Universal Content Management server's content server.
When i try to load the main page with http://myhostname/idc/, it fails to load but when i login to webserver main page using http://myhostname:7777/, it can load.
Can anyone help me on this?
config.config
<?cfg jcharset="UTF8"?>
#Content Server System Properties
IDC_Name=idc
IdcProductName=idccs
SystemLocale=English-US
InstanceMenuLabel=idc
InstanceDescription=Content Server idc
SocketHostAddressSecurityFilter=192.168.0.20
#Database Variables
JdbcDriver=oracle.jdbc.OracleDriver
JdbcConnectionString=jdbc:oracle:thin:@dell:1521:REPOS
JdbcUser=content
JdbcPassword=OI6UvSF4SfabkpF0YGqKmFvjUz/ZK8elZWd2ZXzfQPY=
JdbcPasswordEncoding=Intradoc
DatabasePreserveCase=1
#Internet Variables
HttpServerAddress=AS1
MailServer=mail
SysAdminAddress=sysadmin@mail
SmtpPort=25
HttpRelativeWebRoot=/idc/
CgiFileName=idcplg
UseSSL=No
WebProxyAdminServer=true
#General Option Variables
EnterpriseSearchAsDefault=0
IsJspServerEnabled=0
JspEnabledGroups=
#Additional Variables
DatabaseType=oracle
SearchIndexerEngineName=DATABASE.METADATA
WebServer=apache
IdcAdminServerPort=4440
IntradocServerPort=4444
httpd.conf
include "/oracle/product/10.1.3.1/Oracle_Web/Apache/Apache/conf/oracle_apache.conf"
LoadModule IdcApacheAuth "/oracle/ucm/server/shared/os/linux/lib/IdcApacheAuth.so"
IdcUserDB idc "/oracle/ucm/server/data/users/userdb.txt"
Alias /idc "/oracle/ucm/server/weblayout"
<Location /idc>
Order allow,deny
Allow from all
DirectoryIndex portal.htm
IdcSecurity idc
</Location>

Similar Messages

  • Content Server - Disassociated installation

    Hi,
    I have done the following installations.
    Linux machine1 - Content Server 10gR3
    Linux machine2 - Oracle AS 10gR3 with Apache server (using this as web server)
    Linux machine3 - Oracle DB 10gr2
    In "install_cserver_unix_10en.pdf", under Section F2.2 - Configuring web server system, it states I have to copy "[Instance_Dir]\idcplg", but I don't see this folder in my Content Server installation.
    Without completing this particular step, when I try to login to the server, I get the error "The Server is unavailable. Unable to connect to address.".
    Is the error related to that particular step or did I miss any other setup?
    BTW i followed the instructions provided in install_cserver_unix_10en.pdf for my installation.
    Can anyone please point me to a solution?
    Thanks
    Raji

    Check that you are running IdcAdmin and IdcServer on the Linux Machine1.
    It appears that idcplg is not needed on solaris installations with sun's webserver.
    Message was edited by:
    user648097

  • Content Server 10gR3 installation problem on Windows 7

    Hi,
    I just started working on UCM. I tried to install Content Server 10gR3 on my machine with Windows 7 OS. When I try to install, the installation suddenly aborts or hangs until I abort it. Web server (Apache) and DB (Oracle 10g) are running fine.
    System has got adequate configuration: Enough Disk space, 2GB RAM and 2 GHz CPU
    The same installer worked perfectly on Windows XP Pro 2002 SP2. Can some one reply if UCM 10g is support on Windows 7 ? This, however, is only for learning purpose on my home PC and not for production use.
    I also tried running the installer in Windows XP compatible mode. But this didn't help me either. Do, I need to install Win XP to run it or is there any alternative to make it run on Windows 7.
    Thank you
    Rama

    Hi Srinath,
    Thanks for your prompt reply. Could you also please let me know if there is any advanced version of UCM (like 11g) that works on Windows 7 - before I go for a windows XP installation.
    Thanks again
    Rama

  • Content Server Post Installation

    While doing Post Installation of Content Server , Userid& password are asked in csadmin tcode, but "superdba" & "control"  are not getting accepted. What is the user id& password to be given in "CSAdmin" tcode.Please convey the procedure for creation of Content Repository & Content Server Configuration and usage.

    Hi,
    the transaction is asking for an user/password combination for the KW website within the Internet Information Server. It was not asked for the MaxDB users.
    First try http://<contentservername>:<1090>/ContentServer/ContentServer.dll?serverInfo as URL. You also will be asked for an username/password. Try a username that exists on the Windows server where the content server is running on, e.g. local administator
    Hope that helps.
    Frank

  • Access Content Server Pos-installation Configuration

    Hello,
    I am new with Oracle ECM, I am starting to use it for Webcenter requirements.
    I have installed succesfully Oracle Content Server. I accessed http://localhost:16200/cs, and it showed me the post-installation configurations.
    I made some changes and restarted the server. I then realized I had made some mistakes. How can I access the configuration screen again, and make some changes? Thank you.
    Joao

    Hi
    That config screen does not show up a second time .
    If you want to make modifications to the configurations then make them in<domain_home>/ucm/cs/config/config.cfg
    After the changes are done UCM restart should be done .
    Thanks
    Srinath

  • Content Server 640 installation on Windows

    Hi
    I have installed Content server 640 on windows 2003. IIS is also running.
    When i try the following URL, i don't see the content server running:
    http://<HOST>:1090/ContentServer/ContentServer.dll?serverInfo
    I get the message "The page cannot be displayed"
    Can some body help me please...
    Thanks
    Pavan

    Hi Pavan,
    Make sure permissions are set as below note (even though is says 6.30 it applies to 6.40) regarding "NETWORK_SERVICE" user.
    Note 658442 - SAP Content Server 6.30 on Windows 2003 servers
    Also, read
    Note 851146 - ODBC driver cannot be loaded on Windows 2003
    That most likely will fix the problem
    Regards
    Juan

  • SQL Server 2012 Installation Issue

    Hi
    Not sure if this is the correct forum for this but I'll post anyway.
    Ialready have sql 2005 and 2008r2 installed on my local machine running windows 7, 64 bit.
    I recently tried to install sql 2012 but ran into a problem that I'm stumped by. The installation runs fine, no errors or issues. When I start 2012 the SS Management studio window appears but the usual splash screen in the middle of the window asking to
    to connect to a server does not. If I try hitting any of the meny items at the top of the screen the SSMS window just hangs.
    I have service pack 1 installed also. I uninstalled and tried again but still no luck. my SQL 2005 and 2008r2 version are still fine and run as normal. I also tried installing sql 2014 to see if that would work but I had the same issue as with 2012.
    Any ideas anyone?
    thanks in advance
    

    Hi,
    Both SQL Server 2012 and SQL Server 2014 require .NET Framework 4.0 which does not required by the previous versions.
    Make sure that . NET Framework 4.0 has been successfully installed on your system before you install SQL Server
    Hardware and Software Requirements for Installing SQL Server 2014
    http://msdn.microsoft.com/en-us/library/ms143506.aspx
    Thanks.
    Tracy Cai
    TechNet Community Support

  • App World issues. "having trouble connecting to BlackBerry App world Server" and "installation issue"

    Hey.... I hope this isn't just repeating the 'same old' issue, but I have read through everything I could find and I am still having no luck.
    Anyways I am having a few issues.....
    ONE/// When I try to go to "My World" on my Playbook it always comes up with the message:
    BlackBerry App World is having trouble connecting to the Blackberry App World Server,  Verify your network connections and try again.
    One solution I read was to connect to an alternative WiFi connection, however I haven't got any other connection I can connect to before switching back to my own.... help?!
    TWO// There are also two games I have been desperately trying to install but have had no luck.  Each time all I get is the following message:
    Install Error. There was a problem during Installation.  Please try again.
    I have read the KB26671 file, and tried to follow the 'resolution' there but whenever I log in I never get any 'account set up process' to continue with..... let alone what the rest of the guide says to do.
    THREE// Not sure why but when I try to use AppWorld on my PC it won't show me my playbook device, simply says "please connect your device".... help?  According to my playbook it is connected to computer, and my PC is picking up the Playbook as the manager always tells me it is there and lets me view the files but still AppWorld can't seem to see it.
    Thanks in advance for your help.
    Solved!
    Go to Solution.

    Well I was just trying to see if it was your network connection. I have found that lately anyhow, the connection to the App World hasn't been that reliable - not sure why and it's just been recently for me. But I have downloaded some pretty large files in the last few days too without issue.
    Sorry, this isn't much help but if you find your network connection is becoming flaky, remove the profile and setup a new one. Sometimes I find I have to briefly shut off my internet connection on the PlayBook and then re-enable it when it's acting up. Then things are fine afterwards. A device reboot may help but it may not. I wish I could be more help but this gremlin sounds elusive.
    Actually, duh, why didn't I put two and two together eariler? See if this thread is applicable to you or not: http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/PlayBook-not-letting-me-update-apps/td-p/...
    In short, reboot your PlayBook and try again...

  • Exchange server 2013 Installation issue

    Dear Experts,
    Thanks in advance...
    I am not able to Install Exchange server 2013. I have tried my best to Install but not success. Please find my system configuration.
    Dell Laptop Intel I5 1.7 GHZ
    RAM -8GB
    Vmware workstation 9.
    Steps I followed
    Created a VM inside Vmware and Installed windows 2012 Std. Edition
    Memory assigned to VM is 1 GB
    All prerequisites completed and tried to Install Exchange server 2013 SP1
    During installation it asked me to select the  role to Install and I selected Mailbox server role and CAS
    Exchange setup process started at 3 P.M till 9 P.M setup was not finished finally setup process halt and I got the error  setup could not completed .
    Please find the logs for your reference.............
    04/13/2015 08:41:02.0303] [0] **********************************************
    [04/13/2015 08:41:02.0303] [0] Starting Microsoft Exchange Server 2013 Service Pack 1 Setup
    [04/13/2015 08:41:02.0303] [0] **********************************************
    [04/13/2015 08:41:02.0303] [0] Local time zone: (UTC+05:30) Chennai, Kolkata, Mumbai, New Delhi.
    [04/13/2015 08:41:02.0303] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
    [04/13/2015 08:41:02.0328] [0] Setup version: 15.0.847.32.
    [04/13/2015 08:41:02.0328] [0] Logged on user: WIN-4D2C2JMF5R1\Administrator.
    [04/13/2015 08:41:02.0336] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [04/13/2015 08:41:02.0368] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [04/13/2015 08:41:02.0600] [0] Command Line Parameter Name='sourcedir', Value='C:\Softwares\Exch-13'.
    [04/13/2015 08:41:02.0615] [0] Command Line Parameter Name='mode', Value='Install'.
    [04/13/2015 08:41:02.0632] [0] RuntimeAssembly was started with the following command: '/sourcedir:C:\Softwares\Exch-13 /mode:Install'.
    [04/13/2015 08:41:02.0632] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [04/13/2015 08:41:05.0504] [0] Finished loading screen CheckForUpdatesPage.
    [04/13/2015 08:41:13.0567] [0] Starting file's copying...
    [04/13/2015 08:41:13.0599] [0] Setup copy files from 'C:\Softwares\Exch-13\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
    [04/13/2015 08:41:13.0794] [0] Finished loading screen CopyFilesPage.
    [04/13/2015 08:41:15.0033] [0] Disk space required: 1826493368 bytes.
    [04/13/2015 08:41:15.0033] [0] Disk space available: 46620041216 bytes.
    [04/13/2015 08:42:55.0484] [0] Finished loading screen InitializingSetupPage.
    [04/13/2015 08:42:55.0484] [0] File's copying finished.
    [04/13/2015 08:43:13.0922] [0] Setup is choosing the domain controller to use
    [04/13/2015 08:43:28.0885] [0] Setup is choosing a local domain controller...
    [04/13/2015 08:43:32.0221] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory server 
    is not available. Error message: Active directory response: The LDAP server is unavailable. 
    See the Exchange setup log for more information on this error.
    [04/13/2015 08:43:32.0335] [0] [ERROR] Active Directory server 
    is not available. Error message: Active directory response: The LDAP server is unavailable.
    [04/13/2015 08:43:32.0366] [0] [ERROR] The LDAP server is unavailable.
    [04/13/2015 08:43:32.0366] [0] Setup will use the domain controller ''.
    [04/13/2015 08:43:32.0366] [0] Setup will use the global catalog ''.
    [04/13/2015 08:43:32.0596] [0] No Exchange configuration container was found for the organization. Message: 'Active Directory server 
    is not available. Error message: Active directory response: The LDAP server is unavailable.'.
    [04/13/2015 08:43:32.0707] [0] The following roles have been unpacked:
    [04/13/2015 08:43:32.0721] [0] The following datacenter roles are unpacked:
    [04/13/2015 08:43:32.0739] [0] The following roles are installed:
    [04/13/2015 08:43:32.0739] [0] The local server does not have any Exchange files installed.
    [04/13/2015 08:43:32.0834] [0] Server Name=WIN-4D2C2JMF5R1
    [04/13/2015 08:43:33.0032] [0] Setup will use the path 'C:\Softwares\Exch-13' for installing Exchange.
    [04/13/2015 08:43:33.0084] [0] The installation mode is set to: 'Install'.
    [04/13/2015 08:43:51.0460] [0] Exchange organization name is required for this mode.
    [04/13/2015 08:43:51.0460] [0] Active Directory Initialization status : 'False'.
    [04/13/2015 08:43:51.0472] [0] Schema Update Required Status : 'False'.
    [04/13/2015 08:43:51.0472] [0] Organization Configuration Update Required Status : 'False'.
    [04/13/2015 08:43:51.0472] [0] Domain Configuration Update Required Status : 'False'.
    [04/13/2015 08:43:51.0536] [0] Applying default role selection state
    [04/13/2015 08:43:51.0565] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:43:51.0565] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:43:51.0565] [0] InstallModeDataHandler has 0 DataHandlers
    [04/13/2015 08:43:51.0565] [0] RootDataHandler has 1 DataHandlers
    [04/13/2015 08:43:52.0848] [0] CurrentResult launcherbase.maincore:90: 0
    [04/13/2015 08:43:53.0067] [0] Finished loading screen WelcomePage.
    [04/13/2015 08:44:06.0654] [0] Finished loading screen EULAPage.
    [04/13/2015 08:44:10.0679] [0] Finished loading screen RecommendedSettingsPage.
    [04/13/2015 08:44:13.0814] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:13.0814] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:13.0814] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:13.0844] [0] InstallModeDataHandler has 8 DataHandlers
    [04/13/2015 08:44:14.0048] [0] Finished loading screen RoleSelectionPage.
    [04/13/2015 08:44:18.0619] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:18.0619] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:18.0619] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 9 DataHandlers
    [04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 10 DataHandlers
    [04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 11 DataHandlers
    [04/13/2015 08:44:18.0648] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:18.0648] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:18.0648] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:18.0648] [0] InstallModeDataHandler has 12 DataHandlers
    [04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:22.0644] [0] InstallModeDataHandler has 13 DataHandlers
    [04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:22.0656] [0] InstallModeDataHandler has 14 DataHandlers
    [04/13/2015 08:46:00.0423] [0] Finished loading screen InstallationSpaceAndLocationPage.
    [04/13/2015 08:46:28.0427] [0] Finished loading screen ExchangeOrganizationPage.
    [04/13/2015 08:46:30.0221] [0] Finished loading screen
    Regards
    Biswajeet

    Hi,
    Please find the DC Health check report.
    Microsoft Windows [Version 6.2.9200]
    (c) 2012 Microsoft Corporation. All rights reserved.
    C:\Users\Administrator>dcdiag
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = EX-13
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\EX-13
          Starting test: Connectivity
             ......................... EX-13 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\EX-13
          Starting test: Advertising
             ......................... EX-13 passed test Advertising
          Starting test: FrsEvent
             ......................... EX-13 passed test FrsEvent
          Starting test: DFSREvent
             ......................... EX-13 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... EX-13 passed test SysVolCheck
          Starting test: KccEvent
             ......................... EX-13 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... EX-13 passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... EX-13 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... EX-13 passed test NCSecDesc
          Starting test: NetLogons
             ......................... EX-13 passed test NetLogons
          Starting test: ObjectsReplicated
             ......................... EX-13 passed test ObjectsReplicated
          Starting test: Replications
             ......................... EX-13 passed test Replications
          Starting test: RidManager
             ......................... EX-13 passed test RidManager
          Starting test: Services
             ......................... EX-13 passed test Services
          Starting test: SystemLog
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/14/2015   18:01:37
                Event String:
                DCOM was unable to communicate with the computer fec0:0:0:ffff::1 us
    ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
    m32\dcdiag.exe).
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/14/2015   18:01:49
                Event String:
                DCOM was unable to communicate with the computer fec0:0:0:ffff::2 us
    ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
    m32\dcdiag.exe).
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/14/2015   18:02:02
                Event String:
                DCOM was unable to communicate with the computer fec0:0:0:ffff::3 us
    ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
    m32\dcdiag.exe).
             ......................... EX-13 failed test SystemLog
          Starting test: VerifyReferences
             ......................... EX-13 passed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : NETMAGIC
          Starting test: CheckSDRefDom
             ......................... NETMAGIC passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... NETMAGIC passed test CrossRefValidation
       Running enterprise tests on : NETMAGIC.IN
          Starting test: LocatorCheck
             ......................... NETMAGIC.IN passed test LocatorCheck
          Starting test: Intersite
             ......................... NETMAGIC.IN passed test Intersite
    Regards
    Biswajeet

  • Microsoft sql server 2008 installation issue

    Iam new to microsoft sql server.i have installed microsoft sql sever.
    and if i go through following
    All programs-->Microsoft SQL Server 2008-->Configuration tools-->Sql server configuration manager-->Sql server services
    --> it is showing as the remote procedure call failed (0x800706be)
    My pc is windows 7 32 bit .to make it run wt is need to be done................plz help.

    Hi
    Please Refer
    Balmukund's Link.. Service Pack Upgrade Should fix your Issue,
    check
    http://thesqldude.com/2012/12/05/sql-server-2012-configuration-manager-wmi-error-remote-procedure-call-failed-0x800706be/
    Balmukund Lakhani
    Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
    This posting is provided "AS IS" with no warranties, and confers no rights.
    My Blog |
    Team Blog | @Twitter
    | Facebook
    Author: SQL Server 2012 AlwaysOn -
    Paperback, Kindle
    1 hour 13 minutes ago
    Reply
    |
    Quote
    |
    Propose as answer
    |
    Report as abuse
    Balmukund
    Microsoft
    (MSFT)
    Nag Pal MCTS/MCITP (SQL Server 2005/2008) :: Please Mark Answer/vote if it is helpful ::

  • Linux Installation issues

    Dear All,
    I am installing Linux Rhel 64 bit and and stuck on 27th step " START INSTANCE " details mention below.
    O S                 =  Linux Rhel 5.4 ( 64 BIT )
    Database       =   10 G
    Log Attach of JAVA INSTANCE WORK LOG
    ================ >>> main =======================
    INFO:    sapcpe version: @(#) $Id: //bas/701_REL/src/ccm/sapstart/sapxxcpe.c#3 $ SAP
    =================================================
    INFO:    working only on the File-List /usr/sap/SOL/SYS/exe/run/scs.lst
    INFO:    Try to find file table sapcpeft (default:sapcpeft)
    INFO:    Try to find file table in the central directory /usr/sap/SOL/SYS/exe/run/sapcpeft
    INFO:    Found file table: /usr/sap/SOL/SYS/exe/run/sapcpeft
    =================================================
    Update Local Programs (dir-sync + file-path + ln)
    =================================================
    Starting at 2011/08/24 10:28:57
    Checking the files in the file table for copy type
    INFO:    file /usr/sap/SOL/SYS/exe/run/dbdb2slib.so is not existing and status -copy when file exists- is set
    INFO:    file /usr/sap/SOL/SYS/exe/run/dbdb4slib.so is not existing and status -copy when file exists- is set
    INFO:    file /usr/sap/SOL/SYS/exe/run/dbdb6slib.so is not existing and status -copy when file exists- is set
    INFO:    file /usr/sap/SOL/SYS/exe/run/dbinfslib.so is not existing and status -copy when file exists- is set
    INFO:    file /usr/sap/SOL/SYS/exe/run/libsapcrypto.so is not existing and status -copy when file exists- is set
    INFO:    file /usr/sap/SOL/SYS/exe/run/libsecude.so is not existing and status -copy when file exists- is set
    INFO:    file /usr/sap/SOL/SYS/exe/run/xdnxdaapi.so is not existing and status -copy when file exists- is set
    =================================================
    Working on the files from list file which is defined with parameter: list:/usr/sap/SOL/SYS/exe/run/scs.lst
    =================================================
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/scs.lst -> /usr/sap/SOL/SCS01/exe/scs.lst (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/msg_server -> /usr/sap/SOL/SCS01/exe/msg_server (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/msmon -> /usr/sap/SOL/SCS01/exe/msmon (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/niping -> /usr/sap/SOL/SCS01/exe/niping (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sapstart -> /usr/sap/SOL/SCS01/exe/sapstart (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sappfpar -> /usr/sap/SOL/SCS01/exe/sappfpar (FPM:0x0)
    WARNING: there is a problem to copy the file /usr/sap/SOL/SYS/exe/run/saposcol because of the user uid:0x0 of the source file
    WARNING: sapcpe skip copying the file /usr/sap/SOL/SYS/exe/run/saposcol, because he is not able to set the right file mode to the target file
    WARNING: please copy the file /usr/sap/SOL/SYS/exe/run/saposcol to /usr/sap/SOL/SCS01/exe/saposcol with root permissions.
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sldreg -> /usr/sap/SOL/SCS01/exe/sldreg (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sldreglib.so -> /usr/sap/SOL/SCS01/exe/sldreglib.so (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sapcpp46.so -> /usr/sap/SOL/SCS01/exe/sapcpp46.so (FPM:0x20)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/xml63d.so -> /usr/sap/SOL/SCS01/exe/xml63d.so (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/cleanipc -> /usr/sap/SOL/SCS01/exe/cleanipc (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sapmscsa -> /usr/sap/SOL/SCS01/exe/sapmscsa (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/SAPCAR -> /usr/sap/SOL/SCS01/exe/SAPCAR (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/icmbnd -> /usr/sap/SOL/SCS01/exe/icmbnd (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/enqt -> /usr/sap/SOL/SCS01/exe/enqt (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/enserver -> /usr/sap/SOL/SCS01/exe/enserver (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/enrepserver -> /usr/sap/SOL/SCS01/exe/enrepserver (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/ensmon -> /usr/sap/SOL/SCS01/exe/ensmon (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sapcpe -> /usr/sap/SOL/SCS01/exe/sapcpe (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/msclients -> /usr/sap/SOL/SCS01/exe/msclients (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/msprot -> /usr/sap/SOL/SCS01/exe/msprot (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sapstartsrv -> /usr/sap/SOL/SCS01/exe/sapstartsrv (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/jlogunzip.jar -> /usr/sap/SOL/SCS01/exe/jlogunzip.jar (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sapcontrol -> /usr/sap/SOL/SCS01/exe/sapcontrol (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/sapuxuserchk -> /usr/sap/SOL/SCS01/exe/sapuxuserchk (FPM:0x1)
    INFO:    syncdir:>-------------------------------------
    INFO:    syncdir:sync global and lokal directory:servicehttp
    INFO:    syncdir:>-------------------------------------
    INFO:    syncdir:cleandir: servicehttp
    INFO:    syncdir:createdir: servicehttp
    INFO:    syncdir:updatedir: servicehttp
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/servicehttp/sapmc/frog.jar -> /usr/sap/SOL/SCS01/exe/servicehttp/sapmc/frog.jar (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/servicehttp/sapmc/sapmcswing.jar -> /usr/sap/SOL/SCS01/exe/servicehttp/sapmc/sapmcswing.jar (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/servicehttp/sapmc/sapmc.jar -> /usr/sap/SOL/SCS01/exe/servicehttp/sapmc/sapmc.jar (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/servicehttp/sapmc/soapclient.jar -> /usr/sap/SOL/SCS01/exe/servicehttp/sapmc/soapclient.jar (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/servicehttp/sapmc/sapmc.jnlp -> /usr/sap/SOL/SCS01/exe/servicehttp/sapmc/sapmc.jnlp (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/servicehttp/sapmc/sapmcsoap.jar -> /usr/sap/SOL/SCS01/exe/servicehttp/sapmc/sapmcsoap.jar (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/servicehttp/sapmc/sapmc.html -> /usr/sap/SOL/SCS01/exe/servicehttp/sapmc/sapmc.html (FPM:0x1)
    INFO:    syncdir:<-------------------------------------
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/lgtst -> /usr/sap/SOL/SCS01/exe/lgtst (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/ldapreg -> /usr/sap/SOL/SCS01/exe/ldapreg (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/ldappasswd -> /usr/sap/SOL/SCS01/exe/ldappasswd (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/librfcum.so -> /usr/sap/SOL/SCS01/exe/librfcum.so (FPM:0x0)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/libsapu16.so -> /usr/sap/SOL/SCS01/exe/libsapu16.so (FPM:0x20)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/libsapu16_mt.so -> /usr/sap/SOL/SCS01/exe/libsapu16_mt.so (FPM:0x20)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/libicuuc.so.30 -> /usr/sap/SOL/SCS01/exe/libicuuc.so.30 (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/libicui18n.so.30 -> /usr/sap/SOL/SCS01/exe/libicui18n.so.30 (FPM:0x1)
    --- no copy - target file exists: /usr/sap/SOL/SYS/exe/run/libicudata.so.30 -> /usr/sap/SOL/SCS01/exe/libicudata.so.30 (FPM:0x1)
    Files scanned......:    42   92.76 MB
    All local files, which are available and defined, are up to date. **
    Required Time......:  0:00 
    Copy Errors detected.................: 0
    Sync Errors detected.................: 0
    Not copied files (UID=0) detected....: 1
    Warnings detected....................: 0

    LOG OF DEV_DISP
    trc file: "dev_disp.new", trc level: 1, release: "701"
    sysno      00
    sid        SOL
    systemid   390 (AMD/Intel x86_64 with Linux)
    relno      7010
    patchlevel 0
    patchno    32
    intno      20020600
    make:      single threaded, Unicode, 64 bit, optimized
    pid        16654
    \Wed Aug 24 17:29:53 2011
    kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 16654) [dpxxdisp.c   1286]
         shared lib "dw_xml.so" version 32 successfully loaded
         shared lib "dw_xtc.so" version 32 successfully loaded
         shared lib "dw_stl.so" version 32 successfully loaded
         shared lib "dw_gui.so" version 32 successfully loaded
         shared lib "dw_mdm.so" version 32 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >ram_SOL_00                              <
    DpShMCreate: sizeof(wp_adm)          29784     (1752)
    DpShMCreate: sizeof(tm_adm)          6009216     (29896)
    DpShMCreate: sizeof(wp_ca_adm)          28800     (96)
    DpShMCreate: sizeof(appc_ca_adm)     9600     (96)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
    DpShMCreate: sizeof(comm_adm)          548064     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (2008)
    DpShMCreate: sizeof(wall_adm)          (40056/36728/80/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 0x2ba58b759000, size: 6711576)
    DpShMCreate: allocated sys_adm at 0x2ba58b759000
    DpShMCreate: allocated wp_adm at 0x2ba58b75b308
    DpShMCreate: allocated tm_adm_list at 0x2ba58b762760
    DpShMCreate: allocated tm_adm at 0x2ba58b7627c0
    DpShMCreate: allocated wp_ca_adm at 0x2ba58bd1d940
    DpShMCreate: allocated appc_ca_adm at 0x2ba58bd249c0
    DpShMCreate: allocated comm_adm at 0x2ba58bd26f40
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 0x2ba58bdacc20
    DpShMCreate: allocated gw_adm at 0x2ba58bdacca0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 0x2ba58bdaccd0
    DpShMCreate: allocated wall_adm at 0x2ba58bdaccd8
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    rdisp/queue_size_check_value :  -> off
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation map
    <EsMap> EsMapUnamFileMapInit: Initialize the memory 1944 MB
    Linux: Kernel supports shared memory disclaiming
    Linux: using madvise(<pointer>, <size>, 9).
    Linux: disclaiming for shared memory enabled
    <ES> 485 blocks reserved for free list.
    ES initialized.
    Wed Aug 24 17:29:57 2011
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1681]
    ***LOG Q0K=> DpMsAttach, mscon ( ram) [dpxxdisp.c   12483]
    DP_FATAL_ERROR => DpMsAttach: local hostname 'ram' is resolved to loopback address (cf. SAP note 1054467 for details)
    DISPATCHER EMERGENCY SHUTDOWN ***
    Wed Aug 24 17:29:58 2011
    increase tracelevel of WPs
    kill(16811,0) successful -> process alive
    killing W0-16811 (SIGUSR2)
    kill(16816,0) successful -> process alive
    killing W1-16816 (SIGUSR2)
    kill(16884,0) successful -> process alive
    killing W2-16884 (SIGUSR2)
    kill(17070,0) successful -> process alive
    killing W3-17070 (SIGUSR2)
    kill(17104,0) successful -> process alive
    killing W4-17104 (SIGUSR2)
    kill(17105,0) successful -> process alive
    killing W5-17105 (SIGUSR2)
    kill(17106,0) successful -> process alive
    killing W6-17106 (SIGUSR2)
    kill(17111,0) successful -> process alive
    killing W7-17111 (SIGUSR2)
    kill(17112,0) successful -> process alive
    killing W8-17112 (SIGUSR2)
    kill(17113,0) successful -> process alive
    killing W9-17113 (SIGUSR2)
    kill(17114,0) successful -> process alive
    killing W10-17114 (SIGUSR2)
    kill(17133,0) successful -> process alive
    killing W11-17133 (SIGUSR2)
    kill(17134,0) successful -> process alive
    killing W12-17134 (SIGUSR2)
    kill(17136,0) successful -> process alive
    killing W13-17136 (SIGUSR2)
    kill(17137,0) successful -> process alive
    killing W14-17137 (SIGUSR2)
    kill(17152,0) successful -> process alive
    killing W15-17152 (SIGUSR2)
    kill(17155,0) successful -> process alive
    killing W16-17155 (SIGUSR2)
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=12
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Aug 24 17:30:08 2011
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Wed Aug 24 12:00:08 2011
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA    16811 Run           yes     0   0        0                                                                         
    1 DIA    16816 Run           yes     0   0        0                                                                         
    2 DIA    16884 Run           yes     0   0        0                                                                         
    3 DIA    17070 Run           yes     0   0        0                                                                         
    4 DIA    17104 Run           yes     0   0        0                                                                         
    5 DIA    17105 Run           yes     0   0        0                                                                         
    6 DIA    17106 Run           yes     0   0        0                                                                         
    7 DIA    17111 Run           yes     0   0        0                                                                         
    8 DIA    17112 Run           yes     0   0        0                                                                         
    9 DIA    17113 Run           yes     0   0        0                                                                         
    10 UPD    17114 Run           no      0   0        0                                                                         
    11 ENQ    17133 Run           no      0   0        0                                                                         
    12 BTC    17134 Run           yes     0   0        0                                                                         
    13 BTC    17136 Run           no      0   0        0                                                                         
    14 BTC    17137 Run           no      0   0        0                                                                         
    15 SPO    17152 Run           no      0   0        0                                                                         
    16 UP2    17155 Run           no      0   0        0                                                                         
    Dispatcher Queue Statistics               Wed Aug 24 12:00:08 2011
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    5
    5
    2000
    5
    0
    --------++++--
    +
    DIA
    1
    1
    2000
    1
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          6
    wake_evt_udp_now     1
    wake events           total     6,  udp     1 ( 16%),  shm     5 ( 83%)
    since last update     total     6,  udp     1 ( 16%),  shm     5 ( 83%)
    Dump of tm_adm structure:               Wed Aug 24 12:00:08 2011
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Wed Aug 24 12:00:08 2011
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    105
    DISPATCHER
    -1
    WPCAAD105
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=12
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Aug 24 17:30:13 2011
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >ram_SOL_00                              < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_OFF
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect( key 57 valid )
    ShmProtect( slot Index 56 )
    ShmProtect( Mode: 0 )
    ShmProtect( before shmdt )
    ShmProtect( after shmdt )
    ShmProtect( before shmat )
    ShmProtect( after shmat )
    ShmProtect: shmat key 57 prot 3/0 done
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect( key 57 valid )
    ShmProtect( slot Index 56 )
    ShmProtect( Mode: 0 )
    ShmProtect( before shmdt )
    ShmProtect( after shmdt )
    ShmProtect( before shmat )
    ShmProtect( after shmat )
    ShmProtect: shmat key 57 prot 1/4096 done
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    kill(16811,0) successful -> process alive
    kill(16816,0) successful -> process alive
    kill(16884,0) successful -> process alive
    kill(17070,0) successful -> process alive
    kill(17104,0) successful -> process alive
    kill(17105,0) successful -> process alive
    kill(17106,0) successful -> process alive
    kill(17111,0) successful -> process alive
    kill(17112,0) successful -> process alive
    kill(17113,0) successful -> process alive
    kill(17114,0) successful -> process alive
    kill(17133,0) successful -> process alive
    kill(17134,0) successful -> process alive
    kill(17136,0) successful -> process alive
    kill(17137,0) successful -> process alive
    kill(17152,0) successful -> process alive
    kill(17155,0) successful -> process alive
    Stop work processes
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=12
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Aug 24 17:30:14 2011
    NiISelect: TIMEOUT occured (1000ms)
    wait for end of exclusive shutdown
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=12
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Aug 24 17:30:15 2011
    NiISelect: TIMEOUT occured (1000ms)
    kill(16811,0) successful -> process alive
    kill(16816,0) successful -> process alive
    kill(16884,0) successful -> process alive
    kill(17070,0) successful -> process alive
    kill(17104,0) successful -> process alive
    kill(17105,0) successful -> process alive
    kill(17106,0) successful -> process alive
    kill(17111,0) successful -> process alive
    kill(17112,0) successful -> process alive
    kill(17113,0) successful -> process alive
    kill(17114,0) successful -> process alive
    kill(17133,0) successful -> process alive
    kill(17134,0) successful -> process alive
    kill(17136,0) successful -> process alive
    kill(17137,0) successful -> process alive
    kill(17152,0) successful -> process alive
    kill(17155,0) successful -> process alive
    wait for end of exclusive shutdown
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=12
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Aug 24 17:30:16 2011
    NiISelect: TIMEOUT occured (1000ms)
    Good Bye .....

  • OS Upgrade on Content Server

    Hi,
    We are using Content Server 6.30 Installed on Linux 3EL, DMS Installed on ECC6 system.
    We are using StorageType=FSS(File System Storage) on Content Server.
    Now We are planning to Upgrade OS on Content Server.
    Now Issue is I searched in PAM for suitable OS for our current content server but there I found for MAXdb and SAP db but not for storage type FSS.
    Please suggest for which OS release we should go for our Content Server OS Upgrade and do we need to do anything after Upgrade for our storage(FSS) after Upgrade.
    Please suggest.
    Regards,
    Shivam

    Hi Shivam,
    you just need to make sure that your operating system version that you want to upgrade to is supported for the version of Content Server that you are using.
    You don't have to do anything from the file system side after the upgrade.
    I'd also recommend that you use the latest version of the Content Server - version 6.40. As you have an existing version; you just need to install the latest content server patches to upgrade to this 6.40 version of the Content Server.
    KR,
    Karen.

  • SAP Content Server

    Dear Experts,
    I got problem in installing SAP Content Server 6.30 in Solaris 9 (Unix-SPARC 64bit). After discus with OSS they sugest to review the Apache installation, i try to follow the OSS note number 664384, but i confused with some error about the compilation, here is my compilation step :
    1. We install gcc for solaris 9 from www.sunfreeware.com
    2. In PATH we add PATH=/usr/bin:/opt/sfw/gcc-3/bin
    3. run configure --prefix=/home/sapcs --enable-module=most --enable-shared=max
        i got error :
    ============================================================
        ./helpers/TestCompile: make: not found
    ++ doing sanity check on compiler and options+
    ** A test compilation with your Makefile configuration
    ** failed.  The below error output from the compilation
    ** test will give you an idea what is failing. Note that
    ** Apache requires an ANSI C Compiler, such as gcc.
    ======== Error Output for sanity check ========
    ./helpers/TestCompile: make: not found
    ============= End of Error Report =============
    4. Then we add PATH=/usr/bin:/usr/ccs/bin:/opt/sfw/gcc-3/bin and CFLAGS="-xarch=v9" (note 664384)
    ================================================
    re run ./configure --prefix=/home/sapcs/ --enable-module=most --enable-shared=max
    Configuring for Apache, Version 1.3.41
    ++ using installation path layout: Apache (config.layout)+
    Creating Makefile
    Creating Configuration.apaci in src
    ++ enabling mod_so for DSO support+
    Creating Makefile in src
    ++ configured for Solaris 290 platform+
    ++ setting C compiler to gcc+
    ++ setting C pre-processor to gcc -E+
    ++ using "tr [a-z] [A-Z]" to uppercase+
    ++ checking for system header files+
    ++ adding selected modules+
        o rewrite_module uses ConfigStart/End
          disabling DBM support for mod_rewrite
          (perhaps you need to add -ldbm, -lndbm or -lgdbm to EXTRA_LIBS)
        o dbm_auth_module uses ConfigStart/End
    ++ using builtin Expat+
    ++ checking sizeof various data types+
    ++ doing sanity check on compiler and options+
    ** A test compilation with your Makefile configuration
    ** failed.  The below error output from the compilation
    ** test will give you an idea what is failing. Note that
    ** Apache requires an ANSI C Compiler, such as gcc.
    ======== Error Output for sanity check ========
    cd ..; gcc  -DSOLARIS2=290 -DNO_DBM_REWRITEMAP -DUSE_EXPAT -I./lib/expat-lite -xarch=v9 `./apaci`     -o helpers/dummy helpers/dummy.c   -lsocket -lnsl -lpthread
    gcc: language arch=v9 not recognized
    ld: fatal: file helpers/dummy.c: unknown file type
    ld: fatal: File processing errors. No output written to helpers/dummy
    collect2: ld returned 1 exit status
    *** Error code 1
    make: Fatal error: Command failed for target `dummy'
    ============= End of Error Report =============
    Aborting!
    5.  I tried to remove the env variable CFLAGS="-xarch=v9", and the result it successfuly installed then i tried to install SAP Content Server 6.30, the installation had been done suceesfully but when i tried to start apache, it can not load the mod_sapcs.so
    Syntax error on line 205 of /home_sapcs/conf/httpd.conf:
    Cannot load /home_sapcs/libexec/mod_sapcs.so into server: ld.so.1: httpd: fatal: /home_sapcs/libexec/mod_sapcs.so: wrong ELF class: ELFCLASS64
    apachectl start: httpd could not be started
    Do you have any idea with this problem? I really need advice for this.
    Thanks in advance
    Bagus

    Hello Experts,
    Please provide the solution, how the problem was resolved. Even I am getting following error right after installation of Content server when installation prompts to restart the server, when I try to stop apache on Solaris 10, it throws following error:
    Syntax error on line 233 of /usr/local/apache2/conf/httpd.conf:
    Cannot load /usr/local/apache2/modules/mod_sapcs2.so into server: ld.so.1: httpd: fatal: /usr/local/apache2/modules/mod_sapcs2.so: wrong ELF class: ELFCLASS64
    I am facing this issue since very long now.
    Please reply at earliest.
    Thanks.
    Regards,
    Kashyap Shah

  • Content Server connection problems

    SAP Content Server connection problems
    I have installed the SAP Content Server on a Windows 2003 server. I connected to the Max DB on the remote server from Database Manager on my PC. I created repositories in R/3 in OAC0 and CSADMIN and saved documents to the Content Server. This all took a few hours from O/S install to saving a document in the repository, so I do understand the basics of the Content Server and Max DB.
    Unfortunately we are not going to use Windows; we will be running this on UNIX. Therefore I'm trying it out on a Linux system while I wait for the AIX system to be available. It's been a long road but I have finally gotten the install to finish 'successfully' however I can't connect from R/3.
    When I run the check http://10.XXX.YYY.ZZZ:1090/ContentServer/ContentServer.dll?serverInfo from the browser on the Linux host I get back a good status as shown below:
    serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="0";serverBuild="16";pVersion="0046";serverStatus="running";serverDate="2008-03-25";serverTime="22:39:45";startUpDate="2008-03-25";startUpTime="22:32:21";lastAccessDate="2008-03-25";lastAccessTime="22:38:33";
    However when I do this from any my PC it won't connect. (Of course the real problem is I can't connect from R/3.)
    If I try the same URL from a different user session on the same Content Server Linux host I get the same good status.
    I thought maybe the httpd.conf file was wrong so I tried:
    Listen 0.0.0.0:1090
    In cs.conf I tried commenting out AdminSecurity & AdminSecurityGroup.
    I also changed StorageDriver from SAPDBStorage to FSStorage.
    I don't know if this is related or just another problem to tackle once I can get through this one. I was not able to add the new system to the Database Manager. I get the error "-4 could not connect to socket [10060]".
    Thanks to all for any help. Points will dutifully be rewarded.
    David

    Hi Henk,
    It looks like I am dumber than a rock. The firewall was indeed active on the Linux host. I turned it off and can now do the http connection test to the Content Server. (I awarded very helpful points.)
    I still can't connect to the database with the Database Manager however the message has changed; it now says "-4 XSERVER might be inactive". I just turned off the firewall so I have a few things to try, like figure out how to start MaxDB without the DB Manager. I'll post my progress. Thanks Henk.
    David
    Edited by: Dave Hill on Mar 28, 2008 12:00 AM
    Now I have installed the Database Studion on my PC. No I'm getting this message when I try to connect to the host/database on the Linux system: "Cannot connect to host 10.XXX.XXX.XXX:7210 [Connection refused: connect], -813."
    Does MaxDB need to be started to connect? Any idea how to start it manually? Thanks,
    David
    Edited by: Dave Hill on Mar 28, 2008 1:06 AM
    Ah, at long last. There's this tiny yet very important little program called x_server that SAP didn't include in the SAP Content Server install guide. This needs to be running in order for anything to connect. I'm sure most of you know about it but for the rest you can find it in:
    /sapdb/programs/bin
    Then type
    ./x_server start
    I'm not sure what user it should run under but I started it as the sdb user.
    You could automate the database startup with a script. See http://maxdb.sap.com/doc/7_7/e9/005dac1592496783e26133eb7fad0b/frameset.htm
    Thank you Henk, I'll call this problem solved and award points.
    Edited by: Dave Hill on Mar 28, 2008 2:10 AM

  • Error when viewing documents from content server

    hi all,
    I have a question.
    we have installed an SAP Content Server on Windows 2003 server, and have connected it to our SAP ECC 5.00 ERP.  The purpose is so that documents that are attached to a transaction (through Generic Objects Services - Create Attachment), get stored onto the content server rather than the SAP database.  We have done all the necessary configuration in oac0, oact, and SKPR08.  We are able to attach a document to the transaction, and it gets stored onto the content server.  Our issue is when viewing the attachment. 
    This is the error we are getting as soon as we try to view the attachment:
    "Windows cannot find c:\documents and settings\<username>\SAPWorkDir\<filename>.  Make sure you typed the name correctly, and then try again.  To search for a file, click the Start button, and then click Search."
    After pressing OK to the message, the system then gives this error:
    "File could not be exported
    Message no. SO315
    Diagnosis
    You have selected either the Export function or a PC document to be exported from the system. The file could not be exported to the
    PC. Possible reasons:
    1. The file is already open and is being used by an application.
    2. The directory to which the file is to be exported is write-protected.
    Procedure
    In the first case, close the application.
    In the second case, remove the write-protection attribute from the directory or enter another directory."
    Why is the system trying to open the file from the user's C:\ drive?
    Does anyone have a solution to this error?
    Cheers,

    Hi Aleem,
    Refer to below KB & note, this should help you.
    1849203 - Error message Database error for <GET DATA FROM KPRO> (SO013) and/or File could not be exported (SO315) when opening a document in Attachment list
    764972 - Errors when creating workflow attachment
    Regards,
    Ravi

Maybe you are looking for

  • Location or file name for Audit Trail Logs in Outlook

    Is it possible to trace down each activity on outlook by it's log file (not sure if it's even generated). For example: If I need to check if my outlook mailbox has been updated with the Exchange Server 6 months back. And if not what was the error mes

  • Struggling to use itunes gift card

    For the first time I redeemed an Itunes gift card given to me for $15.  I used my Iphone to redeem it, and tried to purchase an ebook with it.  but noticed right away that it billed my credit card for it instead.  Also since then I have bought music

  • Entity level validation suppressed in backend

    Hi, I am working on jdev 11.1.1.6, where I face a issues which is pretty much strange. I created a editable table from a view object datacontrol by dragging and dropping. This UI table consist of two columns with two LOVs providing them values. The e

  • File reference and Other ID field in an Invoice

    Hi In the invoice, instead of the Purchase order number user would like to populate with Tax Authorities Reference no. In german it is called "Aktenzeichen'. Was not able to find in the invoice can anyone let me know where can I find this field and o

  • Distribution Planning within SAP - APO 3.0 or SCM 4.0

    Hi, Can do any 'Distribution Planning' within SAP SCM V4.0 or V5.0.  We are trying to  improve  'decision-making' associated with selection of a particular warehouse  for shipments coming out of a specific plant. The application should be able to pro