Lire fichier word (texte et image)

Bonjour à tous,
Je cherche un extraire les données (Texte et image) d'un fichier Word. J'ai essayé de regarder le toolkit word specific mais je ne trouve aucune fonction de lecture.
Quelqu'un a-t'il une idée sur la façon de venir extraire ces éléments?
Merci.

Malheureusement, je ne m'y connais pas assez pour te donner une solution clé en main.
Cependant, j'ai une petite idée qui n'est peut-être pas aussi lourde qu'elle en a l'air: on est d'accord pour dire que grâce au noeud de méthode "RunAutoMacro", tu peux lancer une macro Word (codée en VBA généralement) pour peu qu'on crée une référence LabVIEW à ton .doc.
Du coup, tu pourrais coder une macro Word pouvant extraire l'ensemble des images format .jpeg (ou .png, peu importe) présentes dans le fichier Word, non?
Autrement, j'ai encore une autre idée. Il me semble que transformer un fichier .doc en format Web (type .htm ou .html) crée de manière automatique 2 nouveaux fichiers (tu peux essayer en ouvrant word et en faisant Fichier ->Enregistrer Sous -> Type de fichier -> Page Web):
- Un fichier .html (comme prévu)
- ET un répertoire contenant l'ensemble des images.
Une fois ce répertoire créé, c'est un jeu d'enfant pour les récupérer sous LabVIEW, il suffit simplement de connaitre leur nom et leur localisation exacte dans ton C:\...
Bilsix.

Similar Messages

Use Powershell to replace text with image in Word document

I have a powershell script that uses a Word document as a template to create signatures that I am pushing out to my organization.
The document is populated with text formatted the way I want the signature to look, that I then do a FindText and ReplaceText on. This works fine for replacing text with text, but I can't figure out how to properly replace some of the holder text with
an image and a link. I found a few posts about adding images to word documents, but none that seem to work properly in this scenario.
Any insight would be greatly appreciated, thanks!

Dear BOFH,
You are correct that method I outlined is not for inserting an image into a signature block (which would be in Outlook, not Word). The links you post do certainly deal with outlook signatures, well done... Except that the question was about how to
use a Powershell script to replace text in a Word document with an image. Sure it was framed in the context of creating signatures, but the poster expressed that they already had a method of generating and replacing text, and just needed to know, as
I did, how to do the thing they actually asked.
Please BOFH... Please forgive my audacity in hoping to find a reference (any reference) to how to replace Word text with images via Powershell in a thread titled "Use Powershell to replace text with image in Word document".
This is certainly a scripting question, and even something as simple as "You will need to call the .NET methods for the Word find/replace functionality. Please ask in the Word forums for the correct method to use.
If you need help on calling .NET methods look HTTP ://here"support you offered combined with the contempt you offer in response to my actual substantive help to the actual question asked.
BOFH, you are not better than us, just more arrogant.
Can you please start your own question as this one has been closed. Please see scripting guidelines.
We cannot guarantee you satisfaction as this is a user supported forum. The is no SLA for community support. Perhaps if you posted a better worded question as a new topic someone might be able to help you resolve your issue.
The topic you are posting on is closed and answered.
¯\_(ツ)_/¯

How can i copy line with text and image to ms word

When I insert an image in textflow using InlineGraphicElement it works, but when I copy the line with the image to MS Word it copies only the text (not the image).
How can i copy the image to MS Word?

If you want copy formatted text and image to MS Word, you need to give MS Word rtf markup, because Word can recognize rtf markup but not TLF markup.
So you need to create a custom clipboard to paste a rtf markup. It's a large feature for you, because you need a tlf-rtf converter in your custom clipboard.
TLF Custom Clipboard Example:
package
 import flash.display.Sprite;
 import flash.desktop.ClipboardFormats;
 import flashx.textLayout.container.ContainerController;
 import flashx.textLayout.conversion.ITextImporter;
 import flashx.textLayout.conversion.TextConverter;
 import flashx.textLayout.edit.EditManager;
 import flashx.textLayout.elements.*;
 import flashx.undo.UndoManager;
 // Example code to install a custom clipboard format. This one installs at the front of the list (overriding all later formats)
 // and adds a handler for plain text that strips out all consonants (everything except aeiou).
 public class CustomClipboardFormat extends Sprite
 public function CustomClipboardFormat()
 var textFlow:TextFlow = setup();
 TextConverter.addFormatAt(0, "vowelsOnly_extraList", VowelsOnlyImporter, AdditionalListExporter, "air:text" /* it's a converter for cliboard */);
 private const markup:String = '<TextFlow whiteSpaceCollapse="preserve" version="2.0.0" xmlns="http://ns.adobe.com/textLayout/2008">Anything you paste will have all consonants removed.</TextFlow>';
 private function setup():TextFlow
 var importer:ITextImporter = TextConverter.getImporter(TextConverter.TEXT_LAYOUT_FORMAT);
 var textFlow:TextFlow = importer.importToFlow(markup);
 textFlow.flowComposer.addController(new ContainerController(this,500,200));
 textFlow.interactionManager = new EditManager(new UndoManager());
 textFlow.flowComposer.updateAllControllers();
 return textFlow;
import flashx.textLayout.conversion.ITextExporter;
import flashx.textLayout.conversion.ConverterBase;
import flashx.textLayout.conversion.ITextImporter;
import flashx.textLayout.conversion.TextConverter;
import flashx.textLayout.elements.IConfiguration;
import flashx.textLayout.elements.TextFlow;
class VowelsOnlyImporter extends ConverterBase implements ITextImporter
 protected var _config:IConfiguration = null;
 /** Constructor */
 public function VowelsOnlyImporter()
 super();
 public function importToFlow(source:Object):TextFlow
 if (source is String)
 var firstChar:String = (source as String).charAt(0);
 firstChar = firstChar.toLowerCase();
 // This filter only applies if the first character is a vowel
 if (firstChar == 'a' || firstChar == 'i' || firstChar == 'e' || firstChar == 'o' || firstChar == 'u')
 var pattern:RegExp = /([b-df-hj-np-tv-z])*/g;
 source = source.replace(pattern, "");
 var importer:ITextImporter = TextConverter.getImporter(TextConverter.PLAIN_TEXT_FORMAT);
 importer.useClipboardAnnotations = this.useClipboardAnnotations;
 importer.configuration = _config;
 return importer.importToFlow(source);
 return null;
 public function get configuration():IConfiguration
 return _config;
 public function set configuration(value:IConfiguration):void
 _config = value;
import flashx.textLayout.elements.ParagraphElement;
import flashx.textLayout.elements.SpanElement;
import flashx.textLayout.elements.ListElement;
import flashx.textLayout.elements.ListItemElement;
class AdditionalListExporter extends ConverterBase implements ITextExporter
 /** Constructor */
 public function AdditionalListExporter()
 super();
 public function export(source:TextFlow, conversionType:String):Object
 if (source is TextFlow)
 source.getChildAt(source.numChildren - 1).setStyle(MERGE_TO_NEXT_ON_PASTE, false);
 var list:ListElement = new ListElement();
 var item1:ListItemElement = new ListItemElement();
 var item2:ListItemElement = new ListItemElement();
 var para1:ParagraphElement = new ParagraphElement();
 var para2:ParagraphElement = new ParagraphElement();
 var span1:SpanElement = new SpanElement();
 span1.text = "ab";
 var span2:SpanElement = new SpanElement();
 span2.text = "cd";
 list.addChild(item1);
 list.addChild(item2);
 item1.addChild(para1);
 para1.addChild(span1);
 item2.addChild(para2);
 para2.addChild(span2);
 source.addChild(list);
 var exporter:ITextExporter = TextConverter.getExporter(TextConverter.TEXT_LAYOUT_FORMAT);
 exporter.useClipboardAnnotations = this.useClipboardAnnotations;
 return exporter.export(source, conversionType);
 return null;

Can't copy text or images from webpages and paste into word documents or notepad

Today suddenly I cannot copy text or images from webpages (I tried many different ones) and paste into my word 2010 document or notepad. What can I do to get this ability back. Yesterday it worked fine. It does not appear to be a problem with word or notepad so I have to assume it is a problem with Firefox

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Paste selected text AND images from a webpage to Pages/Word?

I'm a new Mac user (also running virtual Windows XP via vmware fusion), and I know next to nothing about my Mac. Please bear with me if this is something that has been answered (I looked, but didn't find a specific answer for my question...it may be here, but I can't find it).
On a Windows-based PC, all I need to do is select, copy, then paste into a Word document. All text and images would paste. I can't seem to figure out how to do that in Pages or Word (have MS Office for Mac, too).
Thanks for any help.

I suppose I was hoping I could do on my Mac, what I did on my Dell...that doesn't appear to be the case.
Specifically, I'm talking about clicking/dragging to select what I want (including images), opening a Word document then pasting everying, including ALL selected images. More specifically, at sites with game walkthroughs. I prefer to save them to a document and refer to them offline, if I need to. I actually tried it at 2 different sites (one that hosts their own images and one that does not), with the same results.
While I was waiting for a response (thank you, so much, by the way), I tried again and actually managed to get the first 3 images (of 60+) to paste into Word. There were blank places in Word, but the invisible images were clickable. In Pages, only the text pasted.
Tried it every which way, but Sunday, LOL, and nothing worked. If it can't be done on my Mac, then I'll just keep using my Dell (I knew there was a reason I decided to keep it) for that sort of thing and then email them to myself...or try installing my MS Office '07 under virtual Windows.
Thanks, again.

How can type a word on an image in Ps and change the text box background

How can I type a word on an Image in Ps and change the background of the text box

Photoshop doesnt have an ability to fill a text box so you will have to create a layer underneath the text layer. A shape layer work work well. That can be filled and stroked quite easily with editability.

Disappearing text and image

I created letterhead in Pages for my lil brothers film production company. Saved. Exported the document to Word. Sent it to him. So far so good. Looks great. Each time he opens the document in WORD and trie to alter the text by selecting and typing over it both the text and the graphics disappear.
Is there any way to correct this? I really love the letterhead and have been having problems recreating it in other software.

Thanks for a quick response. I see yr point. The thing is I am setting up a table cell editor and a renderer. It is easy to set up the editor with a combo box. For the renderer, I am using a default cell renderer and I want to make it look like a combo box as well. Since the default cell renderer extends JLabel, I do something like
comboBoxRenderer = new DefaultTableCellRenderer();
ImageIcon image = new ImageIcon("image/Play16.gif");
comboBoxRenderer.setIcon(image);
comboBoxRenderer.setHorizontalTextPosition(JLabel.LEADING);
which does not get me the effect I want. I can put more pixels between the text and image using setIconTextGap. But it is not fool proof. I think I will try yr approach, but then it gets a little complicated. Would have been good if there is simpler way. I will appreciate yr thoughts

Word document w/images in RGB pasted into InD CS5

Hi!
Working in InDesign CS5 some problem occured: I have received from 3rd party doc in Word w/embedded images(a lot ((( and text, the images are RGB defined.
Now as printing preprocess(finally to PDF) I need to format/create whole document in Indesign CS5 but I got to have the images in CMYK instead of RGB while still
having text black, w/out CMYK profile - could anybody advice 'politically correct' approach to such problem ? ))
Thanx in advance!
cheers,
bcd

Images in InDesign are to be placed as RGB.
But I see other problems with your document. You should never embed images in InDesign, it is better to place and link them.
The other problem is, that Word provides you with a worse image as it could be, often, in most cases (it depends if the creator has imported the images via copy & past, which is not recommended or with the correct insert image command) Word saves the original used image inside the document. You can save your Word document as HTML file (there are several commands, use the most extended version) it will save the original image as separate file. In Bridge you can see resolution and size easily. Use the better image of each and place it in InDesign. If these images have no color profile, apply sRGB to them.
Conversion to a output color space, in your case CMYK, should not be done before PDF export, better later.

Copying Text or Images by right-clicking mouse?

I used to be able select text, right click and copy the text or image into my Word documents. I can't do it anymore. All I get is a box that pops up and has a "Settings" option an "An About Adobe FlashPlayer 10" option.
I am an authorized account with this company and my sales rep said it fines to use the images and text - she just doesn't know how to tell me to do it.
Here's a sample page of what I'm trying to do...
Just to the right of the big orange "BUY" button is an orange link that reads "Press Reviews" it opens a pop-up box and this box contains the images and text I need. Is there any way for me to select, copy, and then paste as needed? Thanks.
http://www.dermalogica.com/us/products.html#/products/our-favorites/daily-resurfacer

Edit/preferences/file type association.

Search .docx and replace text with image

I've got a directory containing a series of images. The images will always be the same name and I need to insert them into placeholders in a Word document which will be a template. I thought of using the image names as placeholders, opening the document
and searching for the image name, replacing it by inserting the image, and doing so for each image in the directory.
$file is the name of the image in the directory and it loops through them okay.
foreach($file in Get-ChildItem $savepath -Filter *.jpg)
# search word doc and replace selected text with image ($file)
Also inserting the image seems simple enough from a TechNet article I found, but I've got no idea how to open the Word document and do a search and replace. I found a few articles related to the subject but I couldn't get them to work when I tried to adapt
them.
Any help is appreciated. Thanks in advance.

This 'might' be possible, but I'm having a hard time finding good references to the com object capabilities for inserting an image into a word document. Creating new, converting format, that sort of thing is straightforward.
I'd do a search on "powershell word comobject" and variations of insert image update edit, etc. Or maybe someone else with more experience/knowledge has a magic bullet for you. Once you get some info on doing it with powershell, expand
your search by omitting the powershell keyword, there's gotta be some solid documentation for the comobject somwhere, but it will probably be a bit complex.
You can also:
$word = new-object -comobject word.application
$doc = $word.documents.add("<path to word document>"
and get-member to your heart's content, but finding references and/or documentation might be easier.
Good luck!
Edit: This could help, but really doesn't give much insight into placement of the image, only helps getting the image into the doc: http://gallery.technet.microsoft.com/office/44ffc6c8-131f-42f1-b24b-ff92230b2e0a
If you do find something useful, post it here, I'm sure others could benefit!
SubEdit: Should have thought of this already...
http://msdn.microsoft.com/en-us/library/ff837519(v=office.14).aspx

How can I combine a lot of text and images on the same screen?

How can I combine a lot of text and images on the same screen? I can get a couple of words on the screen with a graphic but not 10 lines. I need 10 lines on the page with the image.

Priscilla,
I routinely combine 10 lines of 36 pt bible or lecture text to a suitable background using Boris Title 3D.
Many times the text is too long to fit the screen using Boris, so I devide it into 2 or more parts with no transition between sections.
In my case, the text is on the screen as the speaker quotes them.
David

How can I erase the residual background text and images from the backside of a scanned page?

How can I erase the residual background text and images from the backside of a scanned page?
Also, I wanted to know what each subscriptions included as far as my question above is concerned?
I am trying to edit a scanned page (pdf file) by changing some words and erasing the background from the page that is showing through it since the paper is so thin and want to know which subscription to buy in order to complete these tasks?

This cannot be done in Reader. I think you will need software like Photoshop. You may be able to get buy with Photoshop Elements, but I haven't used recent versions of that software. Using either software this will not be an automated task.

Help Me Understand: Readabilty of Text in Images

I make a webcomic (CarpeChaos.com for examples), so I produce a lot of images with a fairly extensive amount of text in them. I want to make sure the fonts in those images are as readable as possible. My experience on this topic is just someone who has read a lot about it online, I'm not professionally trained, so some of my assumptions may be flawed, please point them out. I'm using CS2, but my copy of CS5 is in the mail.
Photoshop is the core of our workflow and our PSDs are set up as several layers of image data and several layers of text. We don't rasterize the text at any point. The text is almost exclusively high contrast grayscale (aka black text on white backgrounds). Each PSD is 2880x3240, but we publish at 960x1080 AND 640x720.
What I know about font rendering tells me that fonts are rendered differently at different sizes, and that scaling rasterized text in images smears them into horrible messes.
With that in mind, I've been a bit of a fascist when it comes to our image mastering process. I never flatten text layers, nor rasterize the text in any other way. My assumption is that Save For Web... in Photoshop does the smart thing by resizing first, then rasterizing the text. Therefore, I use the "Image Size" tab in Save For Web dialog to produce the right sized images. Our jpeg compression is usually between 67% and 87%, although on rare occasion it can go as high as 100%. This produces rather crisp text with about as good of readability as I can hope for in a jpeg.
Unfortunately, this process takes a fair amount of time, and I'd love to dump all our PSDs into a script that generates the jpegs automatically. I've been playing around with File-->Scripts-->Image Processor but haven't yet gotten results that match doing it by hand. And frankly, from the dialogs, I don't trust that it respects my vector fonts as much as I do.
I'm not opposed to switching image formats to png or something else, it just needs to be web friendly.
So I have two questions for the wisdom of this forum:
1) Do you know any way that I can improve readability over what I'm currently doing?
2) How can I get the same results with less work? Is there a way I can get optimal results from an image processor script?

I often use layer styles to make text more readable. Drop shadow and outer glow are often very useful for this, and they don't have to be turned all the way up to greatly increase readability.
For example, for the back jacket of a book, I was putting some light text on a mostly dark background consisting of an image with a lot of stars in it. The letters occasionally overlaid or nearly overlaid stars, and this became kind of distracting. Some drop shadow isolated the text and kept the appearance of the star field intact.
-Noel

Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

Conditional Text and Image based on Excel column values

Hi,
I have an excel file which contains data that needs to be imported/merged in an InDesign document. I have converted that file into a CSV... I'm unable to figure out how to create document using Data Merge after evaluating some conditions on data ... Example InDesing document layout is like below and will be repeated for say 200 data rows...
Heading 1
Text 1, Text 2
Text 3
Image
Heading 1, Text 1 and Text 2 even Image value will be set after checking some condition like below
if ( column 'A' == ' ' && column 'B' == '1')
Set 'Heading 1' == column X
if ( column 'C' == '0' && file.exist(column C & '.jpg'))
Set 'Image' == column C & '.jpg'
Can someone please guide me how to create document when CSV and Images are given based on this scenario? and even if Data Merge is the right solution for this.
-- Thanks.

Data merge can only reproduce one layout, so you can't merge 200 rows and then change things unless you do it in separate documents and then combine them. Of course anything you can do via scripting or manually on a regular document you can also do to a merged document after the merge is complete.
It sounds like this is a multiple-records-per-page scenario. TO do that you set up ONE instance only of what you want to merge, in the upper left position on the page. ID then duplicates EVERYTHING that is on the page as many times as will fit using the spacing parameters you provide. This means you need to be careful with frame sizes so they don't extend beyond where they should, but it also means you can add a no-fill, no-stroke frame as a border or bounding box to make it easier to get a precise size to be used by each record. Frames in merged documents are not threaded from record to record (though there are methods for doing that after the merge, if desired), so deleting a record normally leaves a hole in the page.
If you have master page items, it's probably best to us the "none" master before the merge, then apply the correct master page after.
Peter

Lire fichier word (texte et image)

Similar Messages

Maybe you are looking for