List label on the right

hi
i have a list component and i need the label to appear on the
right side of the list item (since it get Hebrew text and not
Latin). how do i do that? i looked at the documentation but could
not find the solution.
best regards
ron

As I recall, Lightroom sees only the most recently active PSE catalog. So if you go into PSE 11 and switch to Catalog 2 or Catalog 1, close PSE 11 and then open up Lightroom 5, it should be able to convert another of your PSE 11 catalogs. Repeat for the third catalog.
Which sounds to me like a great reason to use only one catalog ...

Similar Messages

  • How to adjust userChrome.css to move the #identity-icon-label to the right side of the #urlbar?

    I hate the way the #identity-icon-label moves the URL over to the right. I've applied a patch to just hide it, but I'd rather make it behave more like IE8 and just have that box show up way over at the right end of the #urlbar.
    So far, my customization experiments in userChrome.css havent yielded the desired result. Also, I thought it would be nice for someone else to be able to search and find a solution to this issue. (If it can be answered.)
    Thanks :)

    Try code like this to set the wanted order.
    <pre><nowiki>
    #urlbar .textbox-input-box {-moz-box-ordinal-group:1!important}
    #identity-box {-moz-box-ordinal-group:2!important}
    #urlbar-icons {-moz-box-ordinal-group:3!important}
    </nowiki></pre>

  • Place my contacts list back to the right hand side of my e mail page

    My contacts list in my e mail ,are no longer on the right hand side and visual when reading my mail. How can I put them back to the old system? PV3-571G OS system Windows 7 home Premium 64 bit.

    Hi,
    Firefox and other browsers only temporarily displays the contents. The actual content, settings etc. are stored at the email site. So you may have to change the email settings to display the contacts list on the left. The email support/forum would be helpful. On the other hand, if there is a display problem/error, you can reset Firefox and start afresh.
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    If you would like to take a listing of the add-ons, changed preferences/settings etc. to quickly replicate the previous profile, please '''Copy all to clipboard''' (on the left of the reset button), and paste it into MS Office Excel, or OpenOffice/LibreOffice Calc, or notepad. However, it would be a good idea to check for the existence of the issue immediately after the reset.

  • Flush Adjusted Label to the Right

    i have build this Graphic in SSRS, and have adjusted the Label that is displayed through an SSRS Expression, and am now required to get the text flushed to the Right.
    Is there a way to do this thrugh an Expression or am i just left Helpless withouth any possible solution ? Thanks to you all in Advance

    Hi gbobj,
    Did you want to change the position of the chart label? Please refer to the following steps:
    Click the chart.
    In the General section, expand the CustomAttributes node.
    Find out the FunnelOutsideLabelPlacement property. We can according to our requirement to change the label position.
    There is an article about Position Labels in a Chart for your reference.
    http://msdn.microsoft.com/en-us/library/dd220469.aspx
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • I have tried importing / exporting my playlist from itunes; dragging songs from itunes to my ipod icon in the right corner; nothing is working.  I want to put songs back on my ipod touch version 6.1.5 from itunes version 11.1.3.8; any one have any ideas

    This is very fustrating I have tried a few different things I have seen on-line and nothing is working.  My itunes is version 11.1.3.8 and my ipod touch is ios version 6.1.5.  Since last Christmas I have a playlist called Christmas songs and I would like to move the songs back onto my ipod.  Before I could drag the songs from under the songs list over to the right and a list including my ipod would show.  It still does but when I do it now the songs do not show up in my ipod.  I would appreciate any ideas to get this to work again.

    Verify you have the right boxex checked to sync
    iTunes: Syncing media content to iOS devices and iPod
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
      - Restore to factory settings/new iOS device.            

  • How to populate List Item from the table in a form builder

    I want to know how to populate the List Item (pop up menu and combo box) from a table.
    Supposing I have a table Customer(cust_id,cust_name)
    and now I want to populate it in such a manner that I can update the data back to the database and also access the list on the form.

    This is the method i am using to populate a list.
    1- First of all you need to create a non-database list item for customer_name.
    2-create this procedure
    PROCEDURE populate_list_with_query
    --Populates the given list item with the specified query.
    (p_list_item in VARCHAR2
    ,p_query in VARCHAR2)
    IS
    /* Name the record group after the list item (no
    block prefix). */
    cst_rg_name constant VARCHAR2(30) :=
    GET_ITEM_PROPERTY(p_list_item,item_name);
    v_rg_id RECORDGROUP;
    BEGIN
    v_rg_id := FIND_GROUP(cst_rg_name);
    IF ID_NULL(v_rg_id) THEN
    v_rg_id := CREATE_GROUP_FROM_QUERY(cst_rg_name,p_query);
    END IF;
    IF POPULATE_GROUP(v_rg_id) = 0 THEN
    POPULATE_LIST(p_list_item,v_rg_id);
    /* Force display of first list element label
    in the list item. */
    COPY(GET_LIST_ELEMENT_VALUE(p_list_item,1),p_list_item);
    END IF;
    END populate_list_with_query;
    3- Create When-Create-Record on the block level and write this code
    BEGIN
    POPULATE_LIST_WITH_QUERY('bk1.customer_name',
    'SELECT customer_name, to_char(customer_id) FROM customer');
    END;
    In this example, the customer name is the (visible) list label and the customer ID is the (actual) list value
    i hope this will solve your problem ...

  • When making a new playlist, the screen layout has changed, the playlist header is now on the left instead of the right, this does not allow me to drag the songs onto the playlist, how do I reset?

    When Making a new play list, the play list was on the right of the screen and this allowed you to drag your music onto the playlist, my setup has changed to the left of the screen which does not allow you to drag your music across, how do I reset?

    In the top corner of iTunes is a small icon with a down arrow, click on that and choose 'show menu bar'. 
    Then on the view menu which now appears choose 'show sidebar'

  • To rename a page or folder In either the Folder List panel or the Folders view of the site, right-click the file or folder, and then click Rename. Type the new name.

    I set out to change the page name ready to publish on my hosts server after Having used a temp. name, simple so the " Expression web user guide says" I have not been able to find the "Folder List panel" of The folders view of the site,
    I have just completed an hour methodically searching for the two files listed, I would be most grateful for some simple instructions on how to find the entities listed in the Title above, which I cut and pasted to make sure that I got it right.
    Regards, 
    Robert
    Robert 1000

    If you are in the standard configuration, click "Site|Open Site," then browse to and open your site. With an open site, you will see a tab at the top labeled "Site View." Another tab at the bottom will be labeled "Folders,"
    because you are then in Folders view of the site (recognize that terminology?). At the same time, unless you have your panels hidden, in the upper left side you will see a panel labeled "Folders List." If you do not see this panel, click "Panels|Reset
    Current Workspace."
    cheers,
    scott
    Please remember to "Mark as Answer" the responses that resolved your issue. It is common courtesy to recognize those who have helped you, and it also makes it easier for visitors to find the resolution later.

  • In previous versions of i Tunes you could highlight a song in your library and there would be a genious list on the right side of the screen showing songs like the one highlighted in the library. Now I do not get that list. Is there a way to get this back

    In previous versions of i Tunes I could highlight a song in my library and a genious list would show on the right side of the screen listing songs that were like the one highlighted. Now I do not get that list. Is there a way to get that back?

    Hi again Bob,
    I believe I've found the feature you were speaking about now. Information on the "In the Store" feature of iTunes can be found here:
    Apple - iTunes - Inside iTunes - Using In the Store from within your iTunes Library.
    http://www.apple.com/itunes/inside-itunes/2013/01/using-in-the-store-from-within -your-itunes-library.html
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • The list of open web pages just flipped from right to left. How do I get it back on the right? Thankyou.

    The list of open web pages, which normally sits bottom right on my screen, flipped to the left. How can I move it back to the right?
    I clicked Alt + tab and saw 'Deplacer' (Reposition - I'm in France). Then the cursor became a thing like a crossroads and I clicked where I wanted to put the list of open pages but nothing happened.

    You may have placed the bookmarks icon on the Navigation Toolbar to open the bookmarks in the sidebar instead of the bookmarks menu button that opens a drop down list.<br />
    There are two icons available for opening or accessing the bookmarks that both have a star.<br />
    The icon with the drop marker opens the drop down list with the bookmarks (Bookmarks Menu button).<br />
    The other, without the star, opens the bookmarks in the sidebar, just like the Ctrl+B shortcut or View > Sidebar > Bookmarks
    See:
    *https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing
    *http://kb.mozillazine.org/Toolbar_customization

  • 'list all tabs' arrow - how can I move it to the right side of the tabs?

    I want to have the 'List all tabs' arrow on the right side of the firefox window.. just to the left of the 'minimise/restore/close' set of buttons. The 'Open a new tab' button can be moved -- why not also the 'list all tabs' button?? Very frustrating. Much Google-fu has not yet found a solution to this simple problem... help?

    Hmm, by default that little downward pointing triangle is at the right end of the tab bar. Could you go back into Customize mode and try dragging anything that appears to the right of it back around to the left of it?

  • How can I display the bookmark list on the right side, not the left, of the monitor screen?

    The display bookmark icon is on the far side of the navigation bar. When activated the list of bookmarks come up on the far left which is not convenient since I am right handed and would like to move the cursor straight down not across the screen.

    There are two bookmarks icons. One displays a drop-down menu and the other opens the browser sidebar. Which one are you using?
    For the drop-down menu, it should open on the side where you have the icon. (Note: this icon generally appears at the right end of the Bookmarks toolbar and in past threads some people have had difficulty moving it to other toolbars.)
    For the sidebar, there might be a trick to switch it from left to right, but this also will affect others sidebars that share the same box, such as history.

  • How can I get bookmark drop down to extend folder list to the left instead of the right?

    Recently cleaned up my bookmarks. Previously when I clicked on the bookmark file bar icon (between history and tools buttons at the top of the screen) the bookmark drop down would appear with my folders and links (as expected) and when I moused over a folder it would open a drop down list on the left of the main bookmark drop down but now it is opening on the right. How can I get it back to opening on the right?
    This is not about having a bookmark pane always open on the left side of the window. Rather it is about how to control how the drop down menus act. (OSX 10.9.3 and Firefox 30.0)
    Thanks!

    So I think I understand what your suggesting but I have a folder inside a folder that has long names and it opens back to the left (after the initially opening to the right) and appears to overlay the screen space needed to display the titles.
    If your right (no pun intended) then the programming that supports the drop down menu display would need to scan through all the enclosed folders looking for the potentially longest title to determine which way to open the list?
    I know that this is a minor issue but it does seem that something may have changed here. It would be nice if there was away to control this part of the drop down operation. Thanks!

  • How do i add a reminders list (to do list?) like there us d to be on the right hand side of iCal?

    How do i add a reminders list (to do list?) like there used to be on the right hand side of iCal?

    Sorry - I linked the article for iOS Reminders. You are posting in the Mountain Lion forum, but you have listed the OS X for Snow Leopard. What OS X are you running?
    Here is the support article for all devices and computers using Reminders:
    iCloud: Calendar Events, Reminders, To Dos, and Tasks behavior differs by application - Apple Support
    GB

  • I read the article on how to remove Bing; however, it does not show up on my list of installed programs and it does not show up in the list of extenstions under "Tools" and "Addon" yet it is installed as an extention to the right of the addlress line.

    I read the article on how to remove Bing; however, it does not show up on my list of installed programs and it does not show up in the list of extenstions under "Tools" and "Addon" yet it is installed as an extention to the right of the addlress line. It is not my home page. Help!!!

    See also:
    *https://support.mozilla.com/kb/Removing+the+Search+Helper+Extension+and+Bing+Bar
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Resetting_preferences

Maybe you are looking for

  • Printing from SSRS

    I currently have a package that generates SSRS reports as PDF's and emails them to our clients. When this task is complete we currently have to manually run and print a report with list of reports sent. Is there a way from within SSRS to print the re

  • Java stored proc performance parsing XML docs

    Hi We are using ORACLE 8i(8.1.6). I have a JAVA Stored procedure that parses XML doc and returns tha values. If I am testing on the box, I get an avg. return time of 2 secs. If I have 20 users, my return time for all went to 25 to 35 secs? Are there

  • Adding an html comment causes entire table to disappear in CC Design view

    Doing some tweaks to a page in the html editor in DW CC and adding a simple comment <!--BEGIN MAIN TABLE-->  causes the extensive table beneath it to disappear from the design view pane.  But the html is still there in the html editor and the page st

  • Are .jpg images non-destructive editing?

    If changes to .jpg's are non-destructive in LR, how can you migrate the changes /w images to another copy of LR on another computer? I've noticed Exporting .jpg's export the changed .jpg's, which must mean that they undergo another round of compressi

  • Vienna

    I am trying to use the Vienna software packaged with my X Fi Elite Pro but I cannot import wav. files into it although every tutorial I have read says that i should be able to. I notice that the version I have does not have the 'soundfont tree' struc