List of all sales condition records(VK13) with a particular tax code

Hi all
We have a requirement to list out all sales condition records created through VK11 which has a particular tax code in it.Say list of all condtion records which have tax code as 'IA'. Could you please let us know the easier way to pull out such report.
We understand that we can get such list from tables KONV and KONP but we are not able to correlate output from such tables with condition record display in VK13. Any pointers to this would be highly appreciated.
Regards,
Santosh

Hi,
Use KONH and KONP tables. condition record whole information will be stored in these 2 tables.
In KONH table you will get header information of the record. like condition type,condition table, created date and validity periods. In varkey field sales area and material other info. .. Note the record number 0000007609.
Goto KONP table, enter same record number in condition record number field. you will get item level information.
Regards,
Chandra

Similar Messages

Is there any FM or BAPI to get list of all sales orders

Hello all,
I have the requirement like below.
Is there any FM if i Pass Drawing document no, type,part,revision level which gives
the output list as.
1) all sales orders, where the above drawing document no is attached to the materials
and these materials are used as one of the lower level components in the Sales order BOM,
I need to show all those sales orders along with SO number,item,Material,Plant and BOM Item no,
2)all sales orders, where the above drawing document no is attached to the materials
and the same material is one of the item in sales order.
3)all sales orders, where the above drawing document no is used as one of the component in Sales order BOm's
Addition of 1,2,3 will be the o/p.
are there any FM or BAPI to get the above list.
Basically the above report is concatenation of report outputs of t-code CSD5 and CS15.
Awaiting reply.
Thanks.

Hi venkatesh,
You can use the BAPI
BAPISDORDER_GETDETAILEDLIST
to get list of all sales orders.
Here is a lik which provides you BAPI'S regarding everything.
[http://www.saptechies.com/sap-bapi-list/]
Hope this will help you.
Regards,
Pavan.

List of all Sales Orders

Hello All
any ideas, what the transaction code is to view the complete list of all sales orders ever created in R/3 (irrespective of customer)?
Thanks in advance
Message was edited by:
Shovon Banerjee

Hi
to get the list of all sales orders irrespective of customers ,follow the given solution
1. VF04 this if for billing due list, can get all the documents list which are billing due documents
...hope this will give the answer for ur problem.
bye

How can I make a backup listing of all of my Firefox bookmarks, with complete URLs, so I can print it out from a word processing document?

== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
How can I make a backup listing of all of my Firefox bookmarks, with completely written out URLs, so I can print it out from a word processing document? Please email me the answer-
[email protected]
<blockquote>duplicate. Locked. Please continue [https://support.mozilla.com/en-US/forum/1/727213 here] -MJB</blockquote>
== Firefox version
==
2.0.0.4
== Operating system
==
PPC Mac OS X Mach-O
== User Agent
==
Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US; rv:1.8.1.4) Gecko/20070515 Firefox/2.0.0.4
== Plugins installed
==
*-Netscape Navigator Default Plug-in
*Runs Java applets using the latest installed versions of Java. For more information: Java Embedding Plugin. Run version test: Test Your JVM.
*Plugin that plays RealMedia content
*The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site.
*Shockwave Flash 9.0 r260
*Provides support for Digital Rights Management
*Provides support for Windows Media.
*Java 1.3.1 Plug-in (CFM)
*Macromedia Shockwave for Director Netscape plug-in, version 8.5.1
*Java 1.3.1 Plug-in

Hello.
Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].

In numbers 2 there was a "show search" which gave a list of all occurences of a value with the location. Does this exist in Numbers 3?

in numbers 2 there was a "show search" which gave a list of all occurrences of a value with the location. Does this exist in Numbers 3?

G.,
The search results pane is gone in V3. If it's critical, stay in V2. I'm not being flippant, I have certain documents that I very carefully keep away from V3 because I don't want to give up the V2 features for those particular files. Some users have reported problems with having both versions active at the same time, so it's best to quit one before launching the other, but other than that you just need to be careful not to open your V2 documents with V3.
Jerry

Info Record link to Sales Condition Record

Is there a way to link a purchsing info record price to a sales condition record price? If we buy/sell a part and update a new purchase price, is there any way to automaticlly udpate my sale price?

Check this link, which can help you Re: MEK1 to VK11
Regards,

Error with Material type/Tax code access sequence in Tax procedure

Hi,
I am trying to create an access sequence with Material type/tax code combination for my tax procedure. While I can generate the condition table successfully, I cannot create an access sequence. The access sequence gives me the pop up message " select a document field for MTART". I searched in the field catalog and its absent. However MTART exists in the table KOMG.
How can I include the field MTART ( material type) in the field catalog. The tax code field is shown as green. Please help.
Thanks and regards,
Soumya.

The field MTART was included as standard in the table . I didn't have to add anything. Further, i couldn't find any standard access sequence for tax procedures that include material type.
I am really stuck with this!!
Regards,
Soumya

How to enter invoice with two different tax codes in one line?

Dear friends,
I have this PO for which I enter the invoice.
I recieve later a subsequent debit for this PO from the transporter. This subsequent invoice has got extra debits, one with 21% VAT and one with 19% VAT, which means two items with two different tax codes.
I want to enter this subsequent debit for each item of the PO, and I want to enter both debits in every item of the PO.
How can I enter in one row in MIRO a debit with two different tax codes.
Thank you.

I want in the same line item to enter two tax codes.
Do you Know if there is any way to do this?
It is a subsequent debit and it has two items with two different tax codes. I want to enter the subsequent debit for a PO with many items and enter the value of the whole subsequent invoice. So there is the need to enter one line item with two tax codes.
How can this be done?
Thank you?

Read sales Condition records

Hi Experts,
I need to read the condition record from sales order maintenance. I have the following information.
Material Number, Quantity, Plant, sales area, customer, condition type. Is there any standard function module which will give me the condition rate given the above details. It should also consider if scales exists for the condtion records.
Thanks a lot for your help.
Best regards
Satish

Satish,
u can try this code.
if u r using WBS element, this vl be the procedure.
*Conditions
SELECT kappl kozgf kvewe kotabnr kolnr
                            FROM t682i INTO TABLE it_t682i
                            WHERE kappl = c_v AND
                                  kvewe = c_a AND
                                  kozgf IN (c_zpr0,c_zpr1).
IF it_t682i[] IS NOT INITIAL.
    SORT it_t682i DESCENDING BY kozgf.
    DELETE it_data WHERE vbeln IS INITIAL.
    DATA: c_val TYPE i VALUE '3600'.
    DATA: BEGIN OF t_t006,
            msehi TYPE t006-msehi,
            zaehl TYPE t006-zaehl,
            nennr TYPE t006-nennr,
          END OF t_t006.
    DATA : it_t006 LIKE STANDARD TABLE OF t_t006.
    SELECT msehi zaehl nennr FROM t006 INTO TABLE it_t006
                             WHERE dimid = 'TIME'.
    LOOP AT it_data ASSIGNING <fs_data>.
      DO.
        READ TABLE it_t682i INTO t_t682i INDEX sy-index.
        IF sy-subrc IS NOT INITIAL.
          EXIT.
        ELSE.
          CONCATENATE c_a t_t682i-kotabnr INTO l_table.
          CLEAR where_clause.
          PERFORM convert_wbs_element USING <fs_data>-objid
                                      CHANGING l_posid.
          PERFORM get_sales_data_of_wbs USING l_posid
                                        CHANGING st_sales.
          IF st_sales IS INITIAL.
            EXIT.
          ENDIF.
          CASE l_table.
When the table is A901, pass the WBS Element
            WHEN c_a901.
              CONCATENATE 'ZZPROJK = ''' <fs_data>-objid '''' INTO where_clause.
When the table is A902, pass the Price List
            WHEN c_a902.
              CONCATENATE 'PLTYP = ''' st_sales-pltyp '''' INTO where_clause.
          ENDCASE.
*Read Condition Rec.No., and Condition type
          SELECT knumh kschl
                INTO TABLE l_gt_konp
                FROM (l_table)
                 WHERE   kappl EQ c_v
                   AND   kschl IN (c_zpr0,c_zpr1)
                   AND   vkorg EQ st_sales-vkorg
                   AND   vtweg EQ st_sales-vtweg
                   AND   kunnr EQ st_sales-kunnr
                   AND (where_clause)
                   AND   matnr EQ <fs_data>-inv_mat
                   AND   datbi GE st_sales-prsdt
                   AND   datab LE st_sales-prsdt.
          IF sy-subrc = 0.
Read the rate, currency and UOM
            SELECT kschl kbetr konwa kmein
              INTO TABLE l_gt_rate
              FROM konp
               FOR ALL ENTRIES IN l_gt_konp
             WHERE knumh    = l_gt_konp-knumh
               AND loevm_ko EQ space.
            IF sy-subrc = 0.
select the data in an internal table and then reading the record
              SORT l_gt_rate DESCENDING BY kschl.
              READ TABLE l_gt_rate INDEX 1.
              <fs_data>-meinh = l_gt_rate-kmein.
              IF l_gt_rate-kschl EQ c_zpr0.
                READ TABLE it_t006 INTO t_t006 WITH KEY msehi = l_gt_rate-kmein.
                IF sy-subrc IS INITIAL.
                  <fs_data>-netwr = ( l_gt_rate-kbetr * <fs_data>-op_megbtr ) / ( ( t_t006-zaehl / t_t006-nennr ) / c_val ) .
                 <fs_data>-netwr = l_gt_rate-kbetr * <fs_data>-op_megbtr.
                ENDIF.
              ELSEIF l_gt_rate-kschl EQ c_zpr1.
                l_gt_rate-kbetr = l_gt_rate-kbetr / 10.
                <fs_data>-netwr = ( l_gt_rate-kbetr / 100 ) * <fs_data>-op_wkgbtr.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDDO.
    ENDLOOP.
ENDIF.
Regards,
Sujatha.
Message was edited by:
        Sujatha Reddy

List of all Weblogic server version compatible with Oracle BPEL 10.1.3.x

Hi all,
Kindly let me know all the web logic server versions compatible with 10.1.3.x.
I know that WLS 9.2 works fine as i have already installed SOA Suite 10.1.3.4 with WLS 9.2 MP3.
But I am not sure bout the rest of the versions of WLS.
i need en exhaustive list of all the versions of WLS compatible with SOA Suite or standalone BPEL having versions - 10.1.3.3 or 10.1.3.4.

Hi Vishal,
11g Certification Matrix on OTN
http://www.oracle.com/technology/software/products/ias/files/oracle%20fusion%20middleware%2011gr1%20(11%201%201%201%200)%20certification%20matrix.xls
10.1.3.4
http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_r3_10.1.3_matrix.xls
10.1.3.3
http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_r3_10.1.3_matrix.xls

Unable to link Condition record number with prices maintained in APO

Hi Guru's,
I need to understand how and where can i see the details of a condition record number maintained in KONP table and use this cond rec to fetch the exact details for a material and customer.
I am a APO consultant, not SD. My SD teams reply that their is some conversion logic written in ABAP which automatically calculates the mat-cust prices. This got me confused.
What is this cond record nu and do we maintain this specifically for 1 product/location or it is for prod-loc combination or separately and later it maps the prod-loc combination as required (how)?
Can you please explain how we maintain prices in ECC, in very simple language?
Thanks in advance.

HI
I think you tax VK stand for SD for you check it once again FTXP
Regards
Kailas Ugale

Advance payment and down payment with two diffierent tax code

HI expert!!!
i have one scenario that advance payment and down payment with different tax code.
in this time, advance payement post to vendor with po number, we do not know how to use tax code V1(deductable tax) or VF(Non-deductable tax), so we post advance payement amount by tax code V1(deductable) even though the amount included both. but we must know how amount is defined deductable tax or non-deductable tax when invoice.
when we want to post down payment with VF , we could not post it because advance payement posted with V1 tax code.
this is main problem with my scenario.
and as i know, can i post two advance payement to same vendor and same po item?, i can't do it with my system.
only one advacne payment is possible with one vendor and one po item. or amount of advance payment is all cleared by down payment, then i can post another advance payment to same vendor. is it standard process with po?
thank you in advance!!

hi,
As per my knowledge their is no difference between advance payment and downpayment.
and tax code is used for taxes purpose not for the payment terms.
taxcode is created in ftxp.and related percentages are maintained in fv11.
ex:-
if i want excise duty - 10% on basic value
education cesse 2% on excise duty
sec.education cesses 1% on excise duty
then fitst i have to create 3 condition types and that 3 condition types are used in my taxprocedure and that taxprocedure is assigned to country code..
after that i am created one taxcode in ftxp like v1= exciseduty10%educatiocess2%sec.edu.cesses1% with this description.
and given the values for that conditions in fv11.
and used that v1 taxcode in your p.o in invoice tab.
and payment terms are came from vendor not from taxcode.
Thanking you.

TAXINN- posting a sales entry from FI using out put tax code

Hi
This client requires TAXINN and need to post a simple sales entry from FI ie cusotmer Dr Sales Cr and Sales Tax Cr.
Can any one tell whether this is possible? If so, how.
thanks a lot
Sridevi

Hi
I think you are using CST for this particular customer,but VAT tax code also be their in customer master records.so system having confusion what to take in posting.
It is coming from SD side i think since you have maintain some tax rate in sales order the billing is directly picking from their depending from your copy control.
but iam not sure about the solution you please make the VAT 0% and try to post in FI. please check whether it works
Also check your sales account what tax code is assigned their
Thanks
Ansuman

Can I have a list of all the compatible graphics cards with the mac pro 2010?

I'm looking a tgetting a mac pro 2010 and I heard that the radeon 5770 *****, so I'm looking at an upgrade for it. thanks

Official for a 2010 (assuming it's not too different from my 2012)
Apple branded 5770
Apple branded 5870
Evga GXT680 (what i have)
Sapphire 7950 Mac Edition
Unofficial (means it will lack a boot screen)
Several Nvidia 650, 670, 680, ...
Several AMD 7850, 7870, 7950, 7970, ...
It takes a bit of research on your part if you go the unofficial route. What has been shown to work, can it be flashed for a boot screen, will it run at full speed or half speed, ...

I recently moved from the US to Sweden and all my contacts are saved with their international country code prefixes. I keep getting text message errors when I send a text, but the contact info is stored correctly for each. How can I fix this?

I receive an error message that adds the country code again. I tried it with no country code and the area code included but I still receive an error message. It only does it sometimes and not to all Sweden contacts. There is no obvious reason why it does it to some but not others. Does any know what the problem is and how to fix it? Thank you!

Only other thing I can suggest is to reset your phone. This won't touch any data or settings:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.

List of all sales condition records(VK13) with a particular tax code

Similar Messages

Maybe you are looking for