List of files in application server
Hi,
I would like to get the list of files in the directory of application server.
Is there any standard function module to acieve this?.
Regards
Elini.P
Hi again,
1. Independent form.
2. I have created one independent form
which does this.
3. we need to just provide the path.
4. just copy paste this code in new program.
On selection screen provide the path
and it returns the files with TIME STAMP.
5.
REPORT abc.
DATA
TYPES: name_of_dir(1024) TYPE c,
name_of_file(260) TYPE c,
name_of_path(1285) TYPE c.
DATA: BEGIN OF file,
dirname TYPE name_of_dir, " name of directory. (possibly
" truncated.)
name TYPE name_of_file, " name of entry. (possibly
" truncated.)
type(10) TYPE c, " type of entry.
len(8) TYPE p, " length in bytes.
owner(8) TYPE c, " owner of the entry.
mtime(6) TYPE p, " last modification date, seconds since 1970
mode(9) TYPE c, " like "rwx-r-x--x": protection mode.
useable(1) TYPE c,
subrc(4) TYPE c,
errno(3) TYPE c,
errmsg(40) TYPE c,
mod_date TYPE d,
mod_time(8) TYPE c, " hh:mm:ss
seen(1) TYPE c,
changed(1) TYPE c,
END OF file.
DATA : allfile LIKE file OCCURS 0 WITH HEADER LINE.
SELECTION SCREEN
PARAMETERS : path(260) TYPE c DEFAULT '/usr/sap/trans' LOWER CASE.
PARAMETERS : mydate TYPE sy-datum DEFAULT sy-datum.
START OF SELECTION
START-OF-SELECTION.
PERFORM getallfiles USING path.
BREAK-POINT.
show date files
WRITE :/ '----
FILES OF DATE ' , mydate.
LOOP AT allfile WHERE mod_date = mydate.
IF allfile-type CS 'file'.
WRITE :/ allfile-name.
ENDIF.
ENDLOOP.
show all files
SKIP.
SKIP.
WRITE :/ '----
ALL FILES & DIRECTORIES'.
LOOP AT allfile .
WRITE :/ allfile-name .
ENDLOOP.
FORM
FORM getallfiles USING mypath .
REFRESH allfile.
CLEAR allfile.
CALL 'C_DIR_READ_FINISH' " just to be sure
ID 'ERRNO' FIELD file-errno
ID 'ERRMSG' FIELD file-errmsg.
CALL 'C_DIR_READ_START' ID 'DIR' FIELD mypath
ID 'FILE' FIELD a_generic_name
ID 'ERRNO' FIELD file-errno
ID 'ERRMSG' FIELD file-errmsg.
DO.
CLEAR file.
CALL 'C_DIR_READ_NEXT'
ID 'TYPE' FIELD file-type
ID 'NAME' FIELD file-name
ID 'LEN' FIELD file-len
ID 'OWNER' FIELD file-owner
ID 'MTIME' FIELD file-mtime
ID 'MODE' FIELD file-mode
ID 'ERRNO' FIELD file-errno
ID 'ERRMSG' FIELD file-errmsg.
IF sy-subrc = 1.
EXIT.
ENDIF.
PERFORM p6_to_date_time_tz(rstr0400) USING file-mtime
file-mod_time
file-mod_date.
allfile = file.
APPEND allfile.
ENDDO.
ENDFORM. "GETALLFILES
FORM
FORM p6_to_date_time_tz USING gmtime
asc_time
asc_date.
DATA: opcode TYPE x,
unique, not_found,
timestamp TYPE i,
date TYPE d,
time TYPE t,
tz LIKE sy-zonlo,
timestring(10),
abapstamp(14),
abaptstamp TYPE timestamp.
timestamp = gmtime.
IF sy-zonlo = space.
Der Benutzer hat keine Zeitzone gepflegt: nehme lokale des App. Srv.
CALL FUNCTION 'TZON_GET_OS_TIMEZONE'
IMPORTING
ef_timezone = tz
ef_not_unique = unique
ef_not_found = not_found.
IF unique = 'X' OR not_found = 'X'. .
tz = sy-tzone.
CONCATENATE 'UTC+' tz INTO tz.
ENDIF.
ELSE.
tz = sy-zonlo.
ENDIF.
wandle den Timestamp in ABAP Format um und lass den ABAP konvertieren
opcode = 3.
CALL 'RstrDateConv'
ID 'OPCODE' FIELD opcode
ID 'TIMESTAMP' FIELD timestamp
ID 'ABAPSTAMP' FIELD abapstamp.
abaptstamp = abapstamp.
CONVERT TIME STAMP abaptstamp TIME ZONE tz INTO DATE date
TIME time.
IF sy-subrc <> 0.
date = abapstamp(8).
time = abapstamp+8.
ENDIF.
WRITE: time(2) TO timestring(2),
':' TO timestring+2(1),
time2(2) TO timestring3(2),
':' TO timestring+5(1),
time4(2) TO timestring6(2).
MOVE timestring TO asc_time.
MOVE date TO asc_date.
ENDFORM. "P6_TO_DATE_TIME_TZ
regards,
amit m.
Similar Messages
-
How to get the list of file from application server
Hi Expert.
I want to get the file list from dicrectory in application server
best regards.
AlexHi.
Yes, You are right, i can get the file list by AL11.
But i need get the list in ABAP program.
So i need a function modul to get the list. If you has some sample code, it should be very nice.
Best.
Alex -
Need a List of Files on Application Server WITH "Last Changed Date".
Experts:
I'm currently using FM 'SUBST_GET_FILE_LIST' but it does not return the date which I need because I'm working on something that needs to build an internal table of the files on the server with the oldest file on top (which means I need to sort by the date).
I've searched this forum and there's several existing posts with different function modules and I've tried several but they either display an ALV grid or they do return an itab but it doesn't have the date.
Please help and thank you!You can try:
data: begin of tabl occurs 0, "execute command on server
line(200),
end of tabl.
call 'SYSTEM' id 'COMMAND' field com
id 'TAB' field tabl-*sys*.
where com is something like 'ls -al'.
Rob -
FM to get list of all directories and files on application server..
Hi All,
Can anyone tel me FM to get list of all directories and files on application server..i know 'F4_DXFILENAME_TOPRECURSION'
and '/SAPDMC/LSM_F4_SERVER_FILE' these are working too...but my requirement is when i click F4 i should get list of directories and whn i select one of these the only directory name should display.....and whn click again for 2nd text box field i want file name ...means directory name in one text box field and file name in another....plz help me out..
helpful answers wil b awarded.
Thanks,
JayshreeHi Jayashree
Please check this FM, SUBST_GET_FILE_LIST. Pass the file path and file name, if it returns an entry in table FILE_LIST, then the filename and path are valid.
Hope this helps !
~ Ranganath -
File from application server-- Email ?
Hi,
I need to pickup a file from application server and Email the same to the intended receipents through ABAP program
For that i had used the following code:
REPORT ZEMAIL_APP_SER_FAIL.
DATA :is_doc_chng TYPE sodocchgi1,
it_objtxt TYPE STANDARD TABLE OF solisti1,
is_objtxt TYPE solisti1,
it_objpack TYPE STANDARD TABLE OF sopcklsti1,
is_objpack TYPE sopcklsti1,
it_objbin TYPE STANDARD TABLE OF solisti1,
is_objbin TYPE solisti1,
it_reclist TYPE STANDARD TABLE OF somlreci1,
is_reclist TYPE somlreci1,
w_lines_tx TYPE i.
** Create Message Body
** Title and Description
*is_doc_chng-obj_name = 'MAIL'.
is_doc_chng-obj_descr = 'Auto genareted Mail from Application server'.
** main text
is_objtxt-line = 'This is an automatically generated mail. Please do not reply to it.'(028).
APPEND is_objtxt TO it_objtxt.
is_objtxt-line = space.
APPEND is_objtxt TO it_objtxt.
* write packing list (main)
DESCRIBE TABLE it_objtxt LINES w_lines_tx.
READ TABLE it_objtxt INTO is_objtxt INDEX w_lines_tx.
is_doc_chng-doc_size = ( w_lines_tx - 1 ) * 255 + STRLEN( is_objtxt ).
CLEAR is_objpack-transf_bin.
is_objpack-head_start = 1.
is_objpack-head_num = 0.
is_objpack-body_start = 1.
is_objpack-body_num = w_lines_tx.
is_objpack-doc_type = 'CVS'.
is_objpack-OBJ_NAME = 'GIND_EXP'.
is_objpack-Obj_langu = 'E'.
APPEND is_objpack TO it_objpack.
is_reclist-receiver = 'XXX'@'YYY'.COM'.
is_reclist-rec_type = 'A'.
Break-point.
*is_reclist-REC_ID = 'XXX@YYY'.COM'.
APPEND is_reclist TO it_reclist.
CLEAR is_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = is_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = it_objpack
contents_txt = it_objtxt
receivers = it_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
when i execute this program:
I get the following error msg:
Activation setting not yet maintained
May i know what is the problem?If you are sending an email, the receiver type should be U (internet mail address type). From your code it appears that you have input it as 'A'. I am not sure if the error message is related to this. Have you checked in transaction SOST, whether an email has been triggered from your program? At what point of execution is this error message triggered?
-
Read Tilda separated file from Application Server
I have a requirement to read a tilda separated file from application server and write a tilda separeted output to application server. Please suggest how to to get data from tilda separated file to internal table ? and also How to create a tilda separated file from internal table to application server.
Hi again,
This some sample code for outputing data on application server with tilda separator.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT. " MESSAGE msg.
IF sy-subrc <> 0.
message i812(LQ).
LEAVE LIST-PROCESSING.
ENDIF.
LOOP AT gs_input INTO wa_input.
CONCATENATE wa_input-wadat_ist
wa_input-sort2
wa_input-name1
wa_input-street
wa_input-region
wa_input-post_code1
wa_input-zzchep
wa_input-vbeln
wa_input-bstkd
wa_input-zfrom
wa_input-zland
wa_input-zccode
wa_input-zrcvd
wa_input-zfref
wa_input-znorc
wa_input-zsepr
wa_input-zvers
wa_input-zlout
wa_input-zinfo
wa_input-zinco
wa_input-zsqal
wa_input-zscod
wa_input-zrqal
wa_input-zeqal
wa_input-zecod
wa_input-zcust
wa_input-ztran INTO g_path SEPARATED BY '~'.
TRANSFER g_path TO p_file.
CLEAR : g_path, wa_input.
ENDLOOP.
CLOSE DATASET p_file.
Hope this will be helpful for you.
Regards,
Vijay -
Problem in uploading file from Application Server
Hi everyone,
i got a problem in uplaoding a file from application server.i am having two folder (one folder name is current and another one is processed)in application server. In current folder i am having N no of files.I want to upload all the files names into one internal table and i want to process one by one file.After processing each file the file should be moved to processed folder and the files should not exist in current folder.All these process must be done everyday.Please rectify my problem asap.Ramesh,
Take authorization from basis guy.
Use the below code to get the list of files from require directory
*& Report ZDIRFILES *
REPORT ZDIRFILES .
PARAMETER: p_fdir type pfeflnamel DEFAULT '/usr/sap/tmp'.
data: begin of it_filedir occurs 10.
include structure salfldir.
data: end of it_filedir.
*START-OF-SELECTION
START-OF-SELECTION.
Get Current Directory Listing for OUT Dir
call function 'RZL_READ_DIR_LOCAL'
exporting
name = p_fdir
tables
file_tbl = it_filedir.
Now in internal table "it_filedir" will have all your files.
For moving and deleting
report zrich_0001.
Parameters: d1 type localfile default '/usr/sap/TST/SYS/fld1/Data1.txt',
d2 type localfile default '/usr/sap/TST/SYS/fld2/Data1.txt'.
data: begin of itab occurs 0,
rec(20) type c,
end of itab.
data: wa(20) type c.
start-of-selection.
open dataset d1 for input in text mode.
if sy-subrc = 0.
do.
read dataset d1 into wa.
if sy-subrc <> 0.
exit.
endif.
itab-rec = wa.
append itab.
enddo.
endif.
close dataset d1.
open dataset d2 for output in text mode.
loop at itab.
transfer itab to d2.
endloop.
close dataset d2.
delete dataset d1.
Check below FM if required
To move the file to archive directoryuse FMs 'PFL_COPY_OS_FILE'
To Delete 'EPS_DELETE_FILE'.
Don't forgot to reward if useful -
Fetching of multiple files from Application Server into SAP Program
Hi All,
I have a issue related <b>Fetching of multiple files from Application Server into SAP Program</b>.
Actual issue is as below.
In the <b>selection screen</b> of <b>my program</b> i will give <b>Application Server Path</b> as :
<b>/PW/DATA/SAP/D1S/PP/DOWN/eppi0720*</b>
Then the based on above input it should pick up all the files that are matching <b>eppi0720*</b> criteria.
Suppose if i am having <b>5</b> files with above scenario, i have to fetch all those <b>5</b> files at a time and place in my SAP Program.
All those 5 file's data should come into SAP at a time.
Can anybody tell me how can we solve above issue.
If any body has come across same issue please provide me with solution.
Thanks in advance.
Thanks & Regards,
Rayeez.If you want to get around the authorization check, you can do something like this.
report zrich_0001 .
parameters: p_path type epsf-epsdirnam
default '/usr/sap/TST/SYS/global'.
parameters: p_file type epsf-epsfilnam default 'CO*'.
start-of-selection.
perform get_file_list.
* FORM get_file_list *
form get_file_list.
types: name_of_dir(1024) type c,
name_of_file(260) type c,
name_of_path(1285) type c.
data: begin of file_list occurs 100,
dirname type name_of_dir, " name of directory. (possibly
" truncated.)
name type name_of_file, " name of entry. (possibly
" truncated.)
type(10) type c, " type of entry.
len(8) type p, " length in bytes.
owner(8) type c, " owner of the entry.
mtime(6) type p, " last modification date, seconds since 1970
mode(9) type c, " like "rwx-r-x--x": protection mode.
useable(1) type c,
subrc(4) type c,
errno(3) type c,
errmsg(40) type c,
mod_date type d,
mod_time(8) type c, " hh:mm:ss
seen(1) type c,
changed(1) type c,
end of file_list.
data: begin of file,
dirname type name_of_dir, " name of directory. (possibly
" truncated.)
name type name_of_file, " name of entry. (possibly
" truncated.)
type(10) type c, " type of entry.
len(8) type p, " length in bytes.
owner(8) type c, " owner of the entry.
mtime(6) type p, " last modification date, seconds since 1970
mode(9) type c, " like "rwx-r-x--x": protection mode.
useable(1) type c,
subrc(4) type c,
errno(3) type c,
errmsg(40) type c,
mod_date type d,
mod_time(8) type c, " hh:mm:ss
seen(1) type c,
changed(1) type c,
end of file.
call 'C_DIR_READ_FINISH' " just to be sure
id 'ERRNO' field file_list-errno
id 'ERRMSG' field file_list-errmsg.
call 'C_DIR_READ_START' id 'DIR' field p_path
id 'FILE' field p_file
id 'ERRNO' field file-errno
id 'ERRMSG' field file-errmsg.
if sy-subrc <> 0.
sy-subrc = 4.
exit.
endif.
* Read the file list and add to internal table.
do.
clear file.
call 'C_DIR_READ_NEXT'
id 'TYPE' field file-type
id 'NAME' field file-name
id 'LEN' field file-len
id 'OWNER' field file-owner
id 'MTIME' field file-mtime
id 'MODE' field file-mode
id 'ERRNO' field file-errno
id 'ERRMSG' field file-errmsg.
if sy-subrc = 1.
exit.
endif.
append file to file_list.
enddo.
* Write out the file list
loop at file_list.
write:/ file_list-name.
endloop.
endform.
Regards,
Rich Heilman -
Infopackage-Load Many Files from Application Server and later Archive/Move
Hi All..
I have a doubt, I have a requirement of take many files to load into BI 7.0.. I used the infopackage before with option:
Load Binary File From Application server
I load information successfully... only with one file ...but If I can load many files (with different names) like the next list.. I think it's not a good idea modify the file name (path) on infopackage each time).. :
*All of this files will be on one server that itu2019s map into AL11.. Like
Infopfw
BW_LOAD_20090120.txt
BW_LOAD_20090125.txt
BW_LOAD_OTHER_1.txt
u2026.
Etc..
This directory it's not in BW server.. It's other server..but I can load form this location (one file by one)
Could you help me with this questions:
- How can I Use an infopackage with routine that take all the files..one by oneu2026 in order of creation dateu2026and load into Target? Is it possible?.. I have some knowledge of ABAP.. but I don´t know exactly how I can say to system this logicu2026
- In addition is it possible move this files to other locationu2026 like into Infopfwarchive u2026 just to have an history of files loaded.
I saw that in infopackage you have an option to create a routine.. in ABAP codeu2026 Iu2019m a little bit confused because I donu2019t know how I can specify all the path..
I try with:
Infopfw
InfopfwFile.csv
Infopfw
This is the abap code that automatically you see and you need to modifyu2026
Create a routine for file name
This routine will be called by the adapter,
when the infopackage is executed.
p_filename =
p_subrc = 0.
Thank you for your ideas or recommendations.
AlHi Reddy, thank you for your answer
I have some doubuts.. when you explain me the option:
All the above files are appending dates at the end of the file....
You can load the files through infopackage by using Routines and pick the files based on date at the end of the file..***
I need to ask you if you think that when you know the date of the file and the infopackage pick each file... thi can work for many files??... or how it's possible control this process?
About this option, I want to ask you If when you menction Unix code... where it's programed this code?.. in the routine of BW Infopackage??
****Or
Create two folders in your BW in Application server level, in AL11 (ask Basis team)
I call it is F1 and F2 folders.
First dump the files into F1 I assume that the file name in F1 is "BW_LOAD_20090120.txt", using Unix code you rename the file and then keep in the same foleder F1 or move to F2.
Then create InfoPackage and fix the file name (i.e. you renamed), so you don't need to change everyday your file name at infopackage level.Because in AL11 everyday the file are overwrite.
To I get BW_LOAD_20090120.txt file in F1, then I renamed to BW_LOAD.txt and loaded into BW, then tomorrow I get BW_LOAD_20090125.txt in F1, then I renamed to BW_LOAD.txt....
so in this way it will work.You need to schedule the Ubix script in AL11.
This is the way how to handle the application server...I'm using the same logic.
Thank you soo much.
Al -
Reading XML File from application server
Hi experts,
My aim is to read a XML file from application server and extract the relevant data from it and process further.
When I am trying to read a XML file from application server it is reading success fully but the problem is that its not reading the last root structure of XML file why is so happening can any body help me?
I am using the following code:
TYPES: BEGIN OF xml_line,
text(256) type x,
END OF xml_line.
DATA: e_file LIKE rlgrap-filename VALUE 'applcatin server path'
OPEN DATASET e_file FOR INPUT IN BINARY MODE.
IF sy-subrc EQ 0.
DO.
READ DATASET e_file INTO wa_item1-text.
IF sy-subrc EQ 0.
APPEND wa_item1 TO gt_item1 .
CLEAR wa_item1.
ELSE.
EXIT.
ENDIF.
ENDDO.
ENDIF.
CLOSE DATASET e_file.
after this i am passing this internal table to "cl_ixml" class to extract the data
but it returning the itab with required value except the last record.
The stream reading the file it self is i thought in complete thats why it is not converting the all values.
Please help me...
Thanks a ton in advance.Hi,
1 Copy Report BCCIIXMLT1
2 (you can change the way of filling internal table xml_table if necessary)
3 you don't need the part between
*-- render the DOM back into an output stream/internal table
and
*-- print the whole DOM tree as a list...
Comment it out or simply delete it
4 Rename form print_node to your liking e.g. process_node
5 In your new form you need three extra variables:
data: attribs type ref to IF_IXML_NAMED_NODE_MAP,
attrib_node type ref to IF_IXML_NODE,
attrib_value type string.
6 After the lines:
when if_ixml_node=>co_node_element.
string = pNode->get_name( ).
Insert:
attribs = pNode->get_attributes( ).
clear attrib_value.
case string.
when ''. "put your XML tag name here
attrib_node = attribs->get_named_item(name = '' ). "put your XML attribute name here
attrib_value = attrib_node->get_value( ).
You can also refer link,
/people/r.eijpe/blog/2005/11/21/xml-dom-processing-in-abap-part-ii--convert-an-xml-file-into-an-abap-table-using-sap-dom-approach
thanks & regards
shreemohan -
Problem while dowloading the file from Application Server
Dear Experts,
I am facing the Problem while downloading the file from Application server.
We done the automatic function while saving the invoice, this will create an idoc, and this idoc is written in the Application Server.
I am running the Transaction AL11 and select the record, and from menu --> List, i am downloading into TXT format.
But for some segments, the length is long, and so the last 3 to 4 fields values are not appearing in the File. Even though i am unable to view the values in the file before downloading. But i can view in IDOC.
Please help me to solve this issue.
Thanks & Regards,
Srinibut our user will use the Txn. AL11 and they will download from there
Educate the user On a serious note, tell him this is not how data from app server should be downloaded. You can ask him to talk to the basis team to provide him access to the app server folder where the file is being stored.
I can set the Variant and put this in background, But always the file name will be change, Like we use Time stamp in the File name.
You can't automate this process by scheduling in BG mode. This is because the in BG mode you can't dwld the file to presentation server.
Hope i'm clear.
BR,
Suhas -
Searching a file in application server
Hi Guys ,
Any ways by which i can search a file passed in my program in the sap network ...
reagrds.check out this link
http://sap.ittoolbox.com/code/d.asp?a=s&d=2241
In the code sample given there (for a different purpose), check out the form
<b>FORM SEARCH_PROT</b>
The code within this form is what is required for your case. Note that you have slightly modify the code, the code given there is for listing all files in the directory.
Just found a better sample at (after posting)
http://www.sapassist.com/code/d.asp?d=1862&a=s
Regards
Raja
Is my answer for your previous Uplaoding PDF file to Application server and Web application from net Direc useful. Do you need more help on that? -
How to Provide search Help for files on Application Server
Hi Guys,
Can anyone tell me How to Provide search Help for files on Application Server. I have put a file name on selection screen. I want to give search help for files on application server.
Thanks & Regards.
Harish.Hi Harish,
Use the following code,
tables sxpgcotabe.
data: lt_execprot LIKE btcxpm OCCURS 0 WITH HEADER LINE,
w_filepath(60) TYPE c, --> length depending on your Directory path.
SELECT SINGLE *
FROM sxpgcotabe
WHERE name = 'LIST_DB2DUMP'
AND opsystem = sy-opsys.
IF sy-subrc <> 0.
SELECT SINGLE *
FROM sxpgcotabe
WHERE name = 'LIST_DB2DUMP'
AND opsystem = 'UNIX'.
IF sy-subrc <> 0.
MESSAGE e000 WITH 'External operating system command '
'LIST_DB2DUMP not found'.
ENDIF.
ENDIF.
sxpgcotabe-parameters = p_filepath. --> provide the directory path.
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
EXPORTING
commandname = sxpgcotabe-name
additional_parameters = sxpgcotabe-parameters
operatingsystem = sxpgcotabe-opsystem
TABLES
exec_protocol = lt_execprot
EXCEPTIONS
no_permission = 1
command_not_found = 2
parameters_too_long = 3
security_risk = 4
wrong_check_call_interface = 5
program_start_error = 6
program_termination_error = 7
x_error = 8
parameter_expected = 9
too_many_parameters = 10
illegal_command = 11
wrong_asynchronous_parameters = 12
cant_enq_tbtco_entry = 13
jobcount_generation_error = 14
OTHERS = 15.
IF sy-subrc <> 0.
MESSAGE e000 WITH text-e01 p_filepath. "Directory failed
ENDIF.
Loop round the directory list, split each line up into a line table
and get the last data for each line, should be the filename
Then build the dirlist.
REFRESH t_dirlist.
LOOP AT lt_execprot.
REFRESH t_dirline.
SPLIT lt_execprot-message AT space INTO TABLE t_dirline.
DESCRIBE TABLE t_dirline LINES w_nolines.
READ TABLE t_dirline INDEX w_nolines.
MOVE t_dirline-data TO t_dirlist-filename.
APPEND t_dirlist.
ENDLOOP.
Here you will get all the files in the directory mentioned in Application server.
For displaying them as a Search help use the FM '/BMC/ZPOPUP_GET_VALUE'
Pass the Internal table to this FM.
Regards,
Paul. -
Process Chain - Delete File from Application Server
Hi Gurus,
Im working with Process chain, and i have a load from a flat file, so my question is :
How can i delete that file from the application server after was loaded ?
THANKS IN ADVANCED !!! I REALLY APRECCIATE YOUR HELP.
Marcoshi,
I have gone through the forum you have posted for deleting files from application server through process chain.
I have similar reuirement in my project.
Can you please provide me the solution?
Your inputs will be highly appreciated.
Thanks in advance.
Regards,
Lavanya. -
How to delete file from application server(Unix)
Hi All,
Using the below code downloading a file from application server(Unix) to client machine. I want to delete the file from application server once it is downloaded to client
We work on Forms 11.1.1.4.0 and Oracle DB 10g. Client machine are Windows 7.
BEGIN
IF webutil_file_transfer.AS_to_Client
(clientFile => Name_In('global.g_file_name')
,serverFile => ls_AppServer_Loc)THEN
message('Data exported Successfully');
ELSE
message('File download from Application Server failed');
END IF;
EXCEPTION
WHEN OTHERS THEN
message('File download failed: '||SUBSTR(sqlerrm,1,200));
END;
I have search for solution on OTN. Few suggested to use HOST.
Can any one help me how to use Host() built_in to delete the file.
Thanks,
MaddyCan any one help me how to use Host() built_in to delete the file.
Host('/bin/rm <complete file path>');
Maybe you are looking for
-
I've done restoring my iphone 3gs and still stuck on cannot activate and contact customer service. What shall i do? any help please.
-
Playing a video outside the browser
Say you are watching a video on flash player on a website somewhere. Is it possible to play this video outside of the browser? Meaning, can I play the same video in a different media player or just by itself on my desktop? Also, is there a way to str
-
Hi all, which roles do we need to view or access the Design Time Repository. We have been assigned to the NWDI.Developper group but it seems it not enough. Thanks.
-
I just bought new I5. It won't connect to Itunes( The iPhone "iPhone" cannot be used because it requires iTunes version 10.7 or later. Go to www.itunes.com to download the latest version of iTunes.). I try to download new Version of Itunes. It says t
-
Can't mount internal partitions whithout root password
I've been making the transition to systemd as the required updates. After last pacman -Syu, when polkit was updated, I could no longer access the CD/DVD, USB devices and the not listed in /etc/fstab internal partitions, due to permissions errors. I h