List of GL users, posting responsibility
Dear
Can any1 help me; how do i get a list of all the users whose responsibilites are GL posting only please.
Regards,
select user_id
from fnd_user fu,
fnd_user_resp_groups furg
where fu.user_id=furg.user_id
and furg.responsbility_id=<GL posting resp id>
Similar Messages
-
Re: (forte-users) No response from Router partition
Sounds like what we have been experiencing here, on Unix.
According to Forté, upgrading to 3M should resolve it. Unfortunately, we
can't
confirm it yet, as we are in the process of upgrading and testing.
I believe this is documented as an "internal" Forté bug report.
Hope this hels.
Daniel Désy
BORN
----- Original Message -----
From: "Pabbaraju, Ramarao (EXP N-IONIDEA)" <ramarao.pabbarajulmco.com>
To: "Forte-Users (E-mail)" <forte-userslists.xpedior.com>
Sent: Tuesday, November 14, 2000 10:46 AM
Subject: (forte-users) No response from Router partition
Hi All,
One of the router partitions on NT server stops responding once in awhile. We can not get to it through escript or econsole and the only
solution we have is to shutdown the ftexec using task manager and start
the partition again. We don't see any error messages in the log except
this line "LbRouter::AttachToRouter - Ignoring DOM version: -1 obj
version: 0". Does anyone have any idea what this means? Is there any way
to figure out the problem? We are using Forte 3L3. Thanks in advance.
Thanks
Ramarao--
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a
new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.comMy guess is, your third service object is not referenced.
-----Original Message-----
From: Forte App [mailto:forteapphotmail.com]
Sent: Wednesday, May 17, 2000 3:08 PM
To: kamranaminyahoo.com
Subject: (forte-users) Partition problem
Hello Everyone,
I have three (3) service objects in my project and when i went into
partition workshop i can only see two service objects instead of three and
all the three service objects properties settings are same
iam using Forte 3.0L2.
Thanks in Advance
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com -
How to copy my personal list to multiple users?
Hi SAP professionals!
How do I copy my own personal list (e.g. Posting Keys) to other existing users? It would really save me a lot of time to just copy it to their profiles, and I would greatly appreciate if somebody can teach me how. Thanks!help anybody? =D
-
How to avoid long user interface response time in long measurements ?
Hi
I tried to find more information regarding techniques how to avoid long user interface response times in case of extremely long measurement times with an external instrument communicating over GPIB, so I post this hoping to get some hint or a link to a guideline. I guess this is quite normal problem.
Problem is that when I want to measure long time in order to get an average result from the instrument, I have to wait until the result is returned from the instrument. Obviously that makes the user interface response very slow in traditional technique.
My restriction is the old GPIB 488 instrument driver that I would not want to modify, but I have source code to it.
What would be the best way to improve the response time for user interface ? I have looked into the few things:
* multithreading
* callback in main program for GPIB events
* modifying instrument driver e.g. to support VISA and creating a VISA callback
regards,
PetriSeveral ways to do this:
If you're getting several measurements, you could have the instrument generate an asynchronous interrupt (an "SRQ" in GPIB terms), then collect the data in response to the SRQ callback. While you're waiting for the SRQ's, you can have your main thread running the interface so responsive GUI. You don't have to spinlock on the GPIB read waiting for instrument data.
Or, as you mentioned, you could spawn a thread to manage the measurements, and use a timer in the main thread to periodically allow you to check the status of the measurement thread. Again, the main thread mostly just runs the user interface.
Either way, the idea is to keep the main thread freed up most of the time to run the GUI, and have it periodically check for completion of your measurement sequence. While you're waiting in the main thread, you may want to make sure the user can't inadvertently re-trigger another measurement sequence until the active one is complete.
If you do find yourself doing a dead wait, you'd want to break this up into a series of shorter waits, and in between each wait, do a ProcessSystemEvents from the main thread to keep the GUI active.
Menchar -
Hello,
Is there a function module or class/method which will give me the list of all locks of a user in the current session and not across all sessions (like transaction SM12). Function modules like ENQUE_READ and ENQUE_READ2 provides the lock list for a user across all sessions but not in the seesion in which the FM is being executed.
Please let me know if you have any information in this regard.
Thanks & Regards,
SaurabhHi saurabh,
Dont post duplicate thread . Its against the rule of engagement.
Locks list for a user session
If you have got the answer in the previous thraed then close this thread.
Regards,
Sujit -
Picking List configuration For user
Hi Friends
I do not know how to configure picking list for user ,
We are maintaining WM at Plant .
I would request you to mention entire process step by step which may help me to understand picking list configuration in totality .
Thanks In Advance
JayaHi,
You can do this in the transaction OMLV -> 'Print Code', Form name depends on the print code. Few are here with.
Single print / TO item LVSTAEINZEL
Multiple print / TO LVSTALISTE
Single print for ref.no. LVSTAEINZEL
Multiple print ref.no. LVSTALISTE
Picking list version 1 LVSKOMMIL1
Picking list version 2 LVSKOMMIL2
Posting change notice LVSUMBUCHEN
Single printout w. kanban LVSTOSOLOKANBAN
Single printout w.kanban LVSSAMMELKANBAN
Best Regards, -
Active Directory, created users not showing up in list of all users
I created a user name "test". However, when I look at a list of all users I only have the 4 users that were created on installation. When I search for "test"
it shows up. Why isn't my user showing up in the list of users?
I am looking in Active Directory Administrative Center:
<my Domain> (local) -> Users
Global Search
Sorry I cannot provide pictures; I am waiting for my account to be activated.You need to look to your search criteria to understand what might be wrong.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
RE: (forte-users) Posted Event Not Seen by EventLoop
Hi,
Event registration occurs when an event loop is activated. If your event
loop is activated before your SO is ready and registered (Init must be
finished) the event loop will be not registered for the event on your SO.
This is a typical example of race condition. A race condition may occur when
two or more processes execute simultaneously and the final result depends on
which process finishes first. Please redesign your project.
Regards,
Zenon Adamek
Purolator
-----Original Message-----
From: Denver Jobs [SMTP:fortejobsindenveryahoo.com]
Sent: Wednesday, June 14, 2000 2:48 PM
To: kamranaminyahoo.com
Subject: (forte-users) Posted Event Not Seen by Event Loop
I have two classes & an SO in a given project.
ManagerClass : object
InterfaceClass : object
ManagerSO : ManagerClass
ManagerClass has the attribute
theInterfaceClass : InterfaceClass
InterfaceClass has the attribute
theManagerClass : Manager Class
The ManagerClass Init method performs a new on
theInterfaceClass and then does a start task on a
method within theInterfaceClass which starts an
external connection listening on a port.
The method also sets theInterfaceClass.theManagerClass
to ManagerSO.
A method gets called in the ManagerClass which writes
to the external connection port within the
theInterfaceClass and then starts an event loop in the
ManagerClass to wait for notification.
When the started task for listening on the external
connection receives data, it calls a method within the
ClassManager - theClassManager.CallMethod(returndata);
The CallMethod actually posts an event within the
ClassManager which the event loop started earlier is
waiting on.
The event does get posted, however, the event loop
that was started never receives the event?!?!?
There are no lower level event loops that
should trap this event prior to this point.
The call to perform the "write" on the external
connection is done as a postregister in the event
loop, so that the event is registered before a post
for the event occurs.
Am I missing something here?
Thanks in advance for any light you might shed.
Yahoo! Photos -- now, 100 FREE prints!
http://photos.yahoo.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.comCheck if ManagerSO = ManagerSO.theInterfaceClass.theManagerClass
Why does InterfaceClass call a methon the the SO? Why doesn't it simply post
its own event, that the SO is registered for?
-----Original Message-----
From: Denver Jobs [SMTP:fortejobsindenveryahoo.com]
Sent: Wednesday, June 14, 2000 8:48 PM
To: kamranaminyahoo.com
Subject: (forte-users) Posted Event Not Seen by Event Loop
I have two classes & an SO in a given project.
ManagerClass : object
InterfaceClass : object
ManagerSO : ManagerClass
ManagerClass has the attribute
theInterfaceClass : InterfaceClass
InterfaceClass has the attribute
theManagerClass : Manager Class
The ManagerClass Init method performs a new on
theInterfaceClass and then does a start task on a
method within theInterfaceClass which starts an
external connection listening on a port.
The method also sets theInterfaceClass.theManagerClass
to ManagerSO.
A method gets called in the ManagerClass which writes
to the external connection port within the
theInterfaceClass and then starts an event loop in the
ManagerClass to wait for notification.
When the started task for listening on the external
connection receives data, it calls a method within the
ClassManager - theClassManager.CallMethod(returndata);
The CallMethod actually posts an event within the
ClassManager which the event loop started earlier is
waiting on.
The event does get posted, however, the event loop
that was started never receives the event?!?!?
There are no lower level event loops that
should trap this event prior to this point.
The call to perform the "write" on the external
connection is done as a postregister in the event
loop, so that the event is registered before a post
for the event occurs.
Am I missing something here?
Thanks in advance for any light you might shed.
Yahoo! Photos -- now, 100 FREE prints!
http://photos.yahoo.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com -
how to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?
You can use third party software True Last Logon 2.9.You can export the file in excel for report creation.You can use the trial version this will achieve what you are looking for.
True Last Logon displays the following Active Directory information:
--Users real name and logon name
--Detailed account status
--Last Logon Date & Time
--Last Logon Timestamp (Replicated value)
--Account Expiry Date & Time
--Enabled or Disabled Account
--Locked Accounts
--Password Expires
--Password Last Set Date & Time
--Logon Count
--Bad Password Count
--Expiry Date
--You can also query for any other attribute (Example: Description, telephone Number, custom attibutes etc)
Refer the below link for trial version:
http://www.dovestones.com/products/True_Last_Logon.asp
Best Regards,
Sandesh Dubey.
MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
My Blog
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
List of Portal users with the assigned Roles.....
Hello All,
I am working on EP6 SP9 and want to know from where can I get a list of all Portal users along with the assigned roles for each of them.
One way I found is by searching for all users in User Administration role and along with the searched users, there is also an icon for Assigned roles.
Apart from the above mentioned way, is there any other way by which I can get a direct list of the same. Is there a Java sample code for this.....?
Please help.
Awaiting Reply.
Thanks and Warm Regards,
Ritu R HunjanHi Ritu,
Yes it is possible to get the roles of the users. You can try the following java code.
package com.hcl.user;
import java.util.Iterator;
import java.util.Vector;
import com.sap.security.api.IRole;
import com.sap.security.api.IRoleFactory;
import com.sap.security.api.IRoleSearchFilter;
import com.sap.security.api.ISearchResult;
import com.sap.security.api.IUser;
import com.sap.security.api.IUserAccount;
import com.sap.security.api.IUserFactory;
import com.sap.security.api.UMFactory;
import com.sapportals.portal.prt.component.AbstractPortalComponent;
import com.sapportals.portal.prt.component.IPortalComponentRequest;
import com.sapportals.portal.prt.component.IPortalComponentResponse;
public class role_member extends AbstractPortalComponent {
public void doContent(
IPortalComponentRequest request,
IPortalComponentResponse response) {
try {
IUserFactory userfactory = UMFactory.getUserFactory();
IRoleFactory rolefactory = UMFactory.getRoleFactory();
IRoleSearchFilter rolefltr = rolefactory.getRoleSearchFilter();
rolefltr.setMaxSearchResultSize(2000);
ISearchResult result = rolefactory.searchRoles(rolefltr);
while (result.hasNext()) {
response.write("<table border=0>n");
String uniqueid = (String) result.next();
IRole role = rolefactory.getRole(uniqueid);
response.write("<tr><td bgcolor=Red>"+ role.getDisplayName()+ "</tr></td>n");
Iterator users = role.getUserMembers(true);
while (users.hasNext()) {
String unique_user = (String) users.next();
IUser user = userfactory.getUser(unique_user);
IUserAccount account[] = user.getUserAccounts();
response.write(
"<tr><td>" + account[0].getLogonUid() + "</tr></td>n");
response.write("</table>n");
response.write("</br>n");
} catch (Exception e) {
This code gives you the list of all the users of your portal along with the roles assigned to them.
Apart from this if you want you want to know all the roles assigned to the user on portal itself then the way you mentioned is the correct method.
Regards
Pravesh
PS: Please consider awarding points. -
Need List of Roles/Users (Dialog only)/Department
Hi,
Can anyone help me with obtaining a list of users either in SUIM or from tables that would give me the List of Roles/Users (Dialog only)/Department. I was not able to find any posts that show how to limit to dialog users only or any table that includes the users and roles and departments. Any help would be appreciated.
Thanks,
Sharongvk1305 wrote:
Hi,
> Quickviewer - SQVI is very useful tool for quick reporting. .
> Regards,
> VInod.
Priceless definition - I am sure guys at SAP would be quite proud about it -
How to find out the list of all user's whose passwords are expired
Hi
i had tried to find out the list of all user's whose passwords are expired.
i had written some jndi code by finding the max age and then find out the current time and subtracted this current time from max age using the following code
"Attributes attbts=ctx.getAttributes("cn=pwdpolicy");
String maxAge=(String)attbts.get("pwdMaxAge").get();
Date Today = new Date();
System.out.println("maxAge"+maxAge);
long curTime=(Today.getTime())-Long.parseLong(maxAge)*1000;"
and then parse it and create a string time as follows
String time=year+month+day+hour+minute+second+"Z";
where "year" "month" etc were parsed from curTime
now i can get the list by using following code
"String filterCriteria="(&(objectclass=person)(pwdChangedTime>="+time+")";
NamingEnumeration results = ctx.search(baseDN,filterCriteria, sc); "
but the current time which i am getting is the time of my system not the time of ldap server
so my questions are following;
1.Can there is any way by which i can get the tivole sever's system time.
2.If there is no way then can you suggest any other way to find out the list of user's whose passwords are expired.
please help me.
Thanks.
Krishan Rathi.Hi,
Thanx for ur reply..
I got the list from the table...
thanks,
sivagami -
How can i get a list of the user created on a database?
dear all
i need to issue a query that return a list for all users that are created on the database
please helpYou can have more refine search ,
sql > select username from dba_users ;
hare krishna
Alok -
How can I get a list of active users on an AS Java platform on a cluster?
Hello Experts,
I have an AS Java NetWeaver CE v7.1 EhP1 SP3 system and it's running in a cluster. Do you know how I can get a list of all users that are currently logged in or whom have active sessions on each application server instance?
Thanks,
Sam> I don't know how to get classes used by VA for this tab.
I wouldn't make any development investments based on classes for the VA anymore...
Considering that not only Salvatore himself, but also the JControl might decide for itself that the system needs a hard shutdown and restart.. a possibly better solution would be to use a redirect. If the message server does does not respond or does not find any DIs or not the one which your previous session state was for, then redirect to a page with a meaningfulll message (and apology on it.
Just a thought,
Cheers,
Julius -
How to get the list of IDM users in a workflow.
Hi,
I wanted to get the list of IDM users in a workflow into a list.Now I tried to use getObjects Method,I do not have the display session here,I passed the workflow context or WF_Context.But it is giving exception like context null .
I used the same method in a form and it worked.How can I get the list of users in a workflow.It is for customizing reports.
Thanks and Regards,
Pandu
Any Idea on how to customize reports including attributes from resources and auditing attributes etc.Any help would be really great.
Thank you.Hi John,
I get this exception WorkItemForm: no id.
This comes when I click on the other column.I generate the data needed in a report and display it as a sorting table when I get the data.
I want to give the user ability to sort data by different columns.But when I click any column I get the exception
WorkItemForm: no id
How can I save a workitem on a manual form before invoking it from a manual action.
Here is the code snippet
<Field name='tblUsers'>
<Display class='SortingTable'>
<Property name='selectEnable' value='false'/>
<Property name='align' value='left'/>
<Property name='linkEnable' value='false'/>
<Property name='sortEnable' value='true'/>
<Property name='width' value='400'/>
<Property name='columns'>
<List>
<String>Account id</String>
<String>First Name</String>
</List>
</Property>
</Display>
<FieldLoop for='row' in='_searchList[*]'>
<Field name='enduserId'>
<Display class='Label'>
<Property name='value'>
<block trace='true'>
<invoke name='getAccountId'>
<ref>row</ref>
</invoke>
</block>
</Property>
</Display>
</Field>
<Field name='lblfirstname'>
<Display class='Label'>
<Property name='value'>
<invoke name='getAttribute'>
<ref>row</ref>
<s>firstname</s>
</invoke>
</Property>
</Display>
</Field>
<FieldLoop> I think I may need to save some workItem,That is why this may be giving the error.How can I correct this.
Thanks,
pandu
Maybe you are looking for
-
Reg. Stock account with sale order (E)
Dear Friends How to purchase row,semifinished and accessories material against sale order (Acc.assignment cat.E) If I purchase without account assignment mean materials are posted to it's material type correctly,but when I use E the material account
-
How to open url with two varible
Hi everyone Could you tell what wrong is in this line. String x="http://localhost/Test.php?memberID=ww&movieID=mm"; Runtime.getRuntime().exec("cmd /c start iexplore "+x); why does my Test.php always only get the first parameter? Test.p
-
How do i transfer songs from my itunes music library to my new ipad mini?
I have numerous songs in my itunes account and now i want to transfer them to my new ipad mini. I can not figure out how to do this. Can anyone explain this process to me?
-
Error occurred while converting the file ".." An unknown error occurred -50
I've had a few tracks which seem to skip on my ipod but play perfectly fine on itunes. As a result, I've been converting these tracks to ACC files; this has worked for a few files but for one particular album i get the following: +error occurred whil
-
Creating a XML file from XSD file
Is there a piece of Java code that will convert a file to XML using a XSD without the use of generated Java classes? Thanks alot, Amy