List of Obsolete Tables in ECC 6.0 - Very Urgent
We are planning to upgrade from 4.6c to ECC 6.0. Heard that there are many standard objects obsolete in ECC 6.0. Can anyone give me the List of Obsolete Tables and also the standard objects in ECC 6.0 with their updated tables and obejcts. This is required very urgently.
Dear,
You may have an overview wirth Solution Browser tool (at the solution point of view) in order to compare functionality between your current system and the ERP 2005.
at:
http://solutionbrowser.erp.sap.fmpmedia.com/
You can get the detailed release information from the following link.
http://service.sap.com/releasenotes.
A release note is a brief explanation of new features or changes to the system since the last software release. A release note typically describes a new function or an existing function that has been enhanced or changed.
I hope this helps.
Lucio Rodrigues
SAP Active Global Support
Similar Messages
-
Master tables of Receipt in 11i - Very urgent
Guru's,
Oracle version: 11.5.10.2
Can you plz let me know what are the modules and its tables gets affected whenever a receipt is created in Oracle purchasing? This is of high importance, so please provide the necessary info.
Thanks in advance,
Sen
Edited by: Sen2008 on Oct 8, 2009 3:00 AMThe tables provided by Arun are right for when the receipt happens, your question is what about inventory tables.
Inventory tables are updated by a follow on transaction - if the setup for routing method is direct delivery receipt and deliver
transactions happen immediately and hence deliver populates inventory tables.
mlt_material_transactions, mtl_transaction_accounts and qoh tables.
If the receipt routing method is set to Standard/Inspection required, the delivery trxn would not happen immediately. -
Obsolete Tables in SAP ECC 6.0
Dear All,
Please let me know the ways to find out obsolete Tables in ECC 6.0 Version.
I checked for the details in table RODIR providing the Object type and Obsolete field to 'X', but RODIR table provides me only Function module (Object type 'FUNC') Information.
Kindly input your valuable suggestions.
Thanks
Senthilkumar LHi,
The obsolete objects(Function Modules & Tables) can be traced by using the table RODIR in which the Object Type should be selected and Obsolete feild as 'X'.
Regards,
Madhu -
Obsolete tables in ECC6.0
Hi All,
Please let us know the list of obsolete tables in ECC6.0 (after an upgrade from 4.6c).
We already have TVARV & BP000 in our list.
Thanks & Regards
AnjaliHi Anjali,
Check below thread:
Obsolete Keywords from SAP version 4.6C to ECC 6.0
Thanks
Sunny -
How to find Obsolete Tables?
Hi!
Can Anybody tell me how to find Obsolete tables in a ABAP System (like in 4.7B,6.0 etc)?
Or if u have list of obsolete tables in any version,please send me.
-ArunaYou may have an overview wirth Solution Browser tool (at the solution point of view) in order to compare functionality between your current system and the ERP 2005.
at:
http://solutionbrowser.erp.sap.fmpmedia.com/
You can get the detailed release information from the following link.
http://service.sap.com/releasenotes.
A release note is a brief explanation of new features or changes to the system since the last software release. A release note typically describes a new function or an existing function that has been enhanced or changed.
I hope this helps.
Reward Points If helpful
Regards
Vasanth -
List of Obsolete BAPI'S in ECC 6.0
Hi,
we are doing an upgrade from 4.7 to ECC 6.0,
kindly provide the list of obsolete function modules and BAPI's
many thanks.Hi,
Go to transaction SE16
Enter the table name RODIR and press ENTER
Enter the object type as "FUNC" and the Obsolete field as 'X'.
Press EXECUTE.
The obtained list is the obsolete function modules in the SAP system.
Check this links:
http://help.sap.com/saphelp_46c/helpdata/en/d2/42f955cafe11d1ad0c080009b0fb56/content.htm
Regards
Adil -
List of obsolete objects and tables
Hi,
Can anyone give the list of obsolete objects and tables from 4.6c to ECC 6.0 upgrade. Also other upgrade issues and solutions faced for ECC 6.0 upgrade.
Thanks in advance.You may have an overview wirth Solution Browser tool (at the solution point of view) in order to compare functionality between your current system and the ERP 2005.
at:
http://solutionbrowser.erp.sap.fmpmedia.com/
You can get the detailed release information from the following link.
http://service.sap.com/releasenotes.
A release note is a brief explanation of new features or changes to the system since the last software release. A release note typically describes a new function or an existing function that has been enhanced or changed.
I hope this helps.
Reward Points If helpful
Regards
Nilesh -
List of tables in ECC 6.0
Can anyone guide me for the procedure to extract the list of all tables (PP,MM,FICO &SD) from ECC 6.0 to excel or provide the link for the same.
Thanks
Edited by: sapsarang on Jun 24, 2009 12:33 PMHi,
You can use table DD02VV, in this table all the table names are stored.
Regards,
prabu -
Obsolete statements in ECC with respect to 4.5b
Hi Gurus,
This is really very urgent.i need an information on Obsolete Statements in ECC 6.0 with respect to 4.5B R/3 Version.please help me..
Full marks would be rewarded 100%
regards
SahilHi
check the table PRGN_CORR2 which gives the list of transactions that were changed from different versions from 3.1G to 4.70 and also above versions
Pls check this
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
Reward if useful
Regards
Raghav T -
Please provide the way to find Obsolete things in ECC 6.0
Hi All,
We are upgrading from 4.6c to ECC 6. We don't have list of Obsolete transactions / Reports / Programs in ECC 6.0.
Its is required to clean-up the roles for obsolete transactions / Reports / Programs. And please help that where we can find this information.
I have one program RFUTAX00_P exists in 4.6c version but does not exist in ECC 6.0 version. So please let me know is this a obsolete program or missed during the upgrade ?.
Your efforts to help on this information is more appreciated.
Thanks & Regards,
Kankipati.You can read the release notes at http://service.sap.com/releasenotes.
Those notes contain the delta between the previous versions so to find out what changed you will need to read the notes for
- 4.7
- ERP 2004
- ERP 6.0
They contain information about new and obsolete transactions component wise so you can select those that you use.
For the second question: Is the program you search in ERP maybe RFUTAX00 - without the _P?
Markus -
Hi all,
Can anyone suggest the replacement for the obsolete table MSKU in SAP ECC 5.0 version.
thanx
RakeshI see active version of table MSKU in ECC 5.0. Are you sure this table is obsolete in ECC5.0?
-
How to send mail to distribution list and another table list
Hi
I am facing a problem. I need to send mail to the user who is creating the SO/PO and a distribution list.
Problem is only one thing can be used at the same time. ie either Distribution list or list from internal table.
How can we use both in 1 function module. Like it should call the internal table and then the distribution list for sending the mail .
Regards,
VarunHi,
Refer to following link,
http://www.sap-img.com/abap/make-e-mail-sender-of-po-the-po-creators-name.htm
http://www.sap-img.com/fu016.htm
Reward pts. if helpfull.
Regards,
Dhan -
How to update a Z-table in ECC for the data coming from CRM
Hi Experts,
I need to store the industry code and description from customer master from CRM into a Z-table in ECC.I have checked the BDOC segments is already there in CRM.This Z-table has to be updated each time when the user save the customer master.This Z-table will be non editable in ECC.
Thanks in advance.
Regards,
SumitHello,
Do you synchronize CRM business partner with ECC business partner?
Because in standard industry code & description are replicated between both objects... so I don't really understand what you try to do.
Anyway, if you would like to save some information in a Z table each time a business partner gets replicated into ECC, you can register a function module in table COM_BUPA_CALL_FU on ECC to do the job.
Kind regards,
Nicolas Busson. -
How to find the list of existing tables in a schema using DB link?
Hi
I know how to find the list of existing tables in a schema using the following query
SQL> select * from tab;
but, how to list the tables using a DB link?
For Example
SQL> select * from tab@dblink_name;
why this doesn't work?
Pl advice me
Thanks
Reddy.ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link? -
How to find list of internal tables while debugging
Hi Experts,
I am debugging a block of an ABAP program( User Exit ). Is there any facility to see what are the internal tables, work areas are available for that particular block? Can I see it new debugger? Because I don't know from which internal table I can take a particular value, which I need to populate in an user exit.
Thanks and regards,
Venkat.hi,
you can find the exact answer here :
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/840ad679-0601-0010-cd8e-9989fd650822#q-6
under heading List of internal tables while debugging
regards
rahul
Maybe you are looking for
-
How do you add a MAC address to air port so it will recognize a Nest thermostat
How do you add a MAC address to anAir Port
-
okay so i have an iphone 4, took some HDR pictures and imported them into iphoto 09. now how do i combine them to get one better quality picture? there is no mention of HDR in iphoto manual or menus?
-
Can Portal 6.0 SP2 upgrade to EP 2004 with R/3 base release stay at 4.6C ?
Hi, portal experts, We have EP 6.0 SP2 working well with R/3 base release at 4.6C. Now we are wondering whether we can upgrade EP 6.0 SP2 alone. In other words, can we leave R/3 as it is (4.6C), and upgrade only EP 6.0 SP 2 to EP 2004 ? In general, c
-
ITunes could not sync apps because apps could not be determined
iPhone 3G with current iOS software and latest version of iTunes using a Windows 7 PC. - so I was transferring pictures from my Mom's iPhone to the computer and syncing other pictures back onto the phone. all well and good. then I do a general sync a
-
Photoshop CS5.1 VDCAssistant
Hello, I've been using the Photoshop CS5.1 trial for a while now and I noticed that Photoshop always seems to open an instance of the VDCAssistant process. This process is used to get images from the iSight webcam (Photo Booth, e.g., or a video chat