List of pm orders getting generated on the same day.

Dear all,
my problem is large nos of pm orders are generated on the same day for a particular equipment.
some information regarding this are as follows:
1) maintainance plant same for all the nos.
2) order type is ZM11----->Preventive maintainance order
please guide me how to proceed further in order to resove the issue.
Regards,
santosh.

Now you have given 1-month as the call interval but, when you have scheduled in background, what is the time interval you have given for the batch job to run daily, weekly, monthly?
Say you have given daily, system will run the job daily, will check for the plans, which are due within next 1 month (because of call interval), refer call horizon and then schedule it. So even if you have given 1-month in call interval, it depends how often you are actually scheduling it i.e. at what frequency are you running the back ground job. So it is daily, check for any plan, which is meeting these parameters i.e. call interval, next call due date and the call horizon, you will be able to see the call created tomorrow.
Regards,
Ketul

Similar Messages

  • How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

    With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
    Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
    Does anyone have a solution?
    Thanks in advance.

    Thank you very much. I'll be waiting for you message.
    Messaggio originale----
    Da: [email protected]
    Data: 26/01/2015 17.56
    A: "Umberto Gangi"<[email protected]>
    Ogg:  How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
        How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
        created by Gilad D (try67) in Creating, Editing &amp; Exporting PDFs - View the full discussion
    Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
         If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
         To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, &amp; "Stop Following"
         Start a new discussion in Creating, Editing &amp; Exporting PDFs by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Need to run sales order planning manually in the same day.

    Hi guys,
    My PP/DS planning horizon has deifned for 24 hours time period. If sales order comes today, it will be planned tomorrow. If I need to run planning manually of particular sales order same day, when it comes. How should I do?
    If the answer is to run product heuristic, Can anyone tell me how product heuristic should be run (the right steps)?
    Thanks
    Shaan

    Hi,
    You just open product view in transaction  /SAPAPO/RRP3. in edit mode, press "product heuristic" button.
    Claire

  • Multiple Purchase Requisition generate in the same date WHY ?

    Hi All,
    In MD04 Tcode for one Material No , I can see multiple PR getting generated for the same Date !! I would like to know based on what settings same date is appearing ?? and also please tell how to combine all this PR into one PR !!! Please guide me
    Thanks & Regards,
    Vinoth.

    Hi,
    Che on it:-
    Re: Third party Drop Ship
    Re: Single PO for Multiple PR
    Re: MD04 + Auto PR generation
    pherasath

  • Majority of Apps released are being reviewed/released the same day?

    Check this out:
    http://www.medialets.com/app-store-metrics/feeds/new/
    If you look at the release dates (when they get submitted), they are generally the same day that they hit the AppStore.
    I verified this by looking at one of my apps, and the "release date" was the same day I submitted it. However it showed up in the app store (10 days later) .. therefore I believe that the release date is actually accurate.
    What does this mean?
    I believe it means that most apps that hit the appstore are getting churned out the same day. If you don't get released on the same day, you might be in for a very long wait, or there is something wrong with you / your app.
    Some ideas:
    - App that is uninteresting to the reviewers
    - It's your second+ app
    - Bad reviews / low popularity for existing apps
    - Problems with the App
    It's an interesting problem. It's unclear to me that there is a solution, except to write high quality, innovative, interesting apps that your pretty sure Apple will like and will get reviewed well / be popular .. which I suppose, isn't such a bad thing, all considered.

    My first app took 8 days to go from review to pending contract. It's been pending contract for 3 days now.
    I find it unlikely a lot of apps are getting to the store in 1 day.
    {quote:title=blazespinnaker wrote:}
    I verified this by looking at one of my apps, and the "release date" was the same day I submitted it. However it showed up in the app store (10 days later) .. therefore I believe that the release date is actually accurate.
    {quote}
    This contradicts your whole point I think. If your app took 10 days from the release/submit date then why do you think so many apps are going to the store the day they are submitted. Maybe I'm misunderstanding your statement.

  • Transportation lane KEY not getting generated in the table

    Transportation lane KEY not getting generated in the table
    Hi folks,
    The issue is like this :
    We have a weekly workorders upload program from legacy systems to SAP-APO. The legacy planners send a .CSV file containing material-wise workroders. A customised zee program picks these quantities & writes them in Prod.planned keyfigures in SNP planning book. This process is done for the manufacturing locations only.
    Lately workorders for two particular material M1 & M2 had failed to get upload. It gives the error 'NO VALID SOURCE OF SUPPLY COULD BE FOUND' in its Job log. We did some debugging & found that for successful materials the  TRPID is getting generated in the table /SAPAPO/V_TRPROD  whereas this TRPID is missing for M1 & M2. Why this is happening is our main concern. We tried deleting the PPM & creating this again, assuming that the PPMID is the precursor for generating this TRPID, but this yielded no results.
    ____ for successful upload______________
    se16 --> /SAPAPO/V_TRPROD
    Version = 000
    LOCTO = LOCID KEY for manufacturing location
    MATID = MATID KEY of successfully loaded workorder
    Enter
    This gives the following results
    TRPID = TRPID KEY
    LOCFR = LOCID KEY for manufacturing location
    LOCTO = LOCID KEY for manufacturing location
    MATID = MATID KEY for successfully loaded workorder
    ( This seems a self-lane, i.e both TO & FROM location are same)
    ____ for unsuccessful upload________
    se16 --> /SAPAPO/V_TRPROD
    Version = 000
    LOCTO = LOCID KEY for manufacturing location
    MATID = MATID KEY for unsuccessfully loaded workorder
    Enter
    This gives the following results
    Error = No Table entries found for specified KEYS
    We are perplexed why this TRPID is not getting generated for these two particular material M1 & M2?
    We have deleted their PPM & re-created them to cross-check if the PPMID KEY is the trigger for generating the TRPID key. This didn't work!
    Please let us know in case someone faced a similar issue.
    Many Thanks.
    Kumar
    Edited by: Blue Lotus on Jun 9, 2011 2:44 PM

    Yes Anand.
    We deleted the PPM & created it again, which didn't work.
    Later on we deleted the product itself from APO & re-CIFed it from R3 & then re-created the PPM.
    The PPMID which was missing earlier is now getting created! However no luck with the TRPID.
    Why this TRPID is not getting generated in our only concern
    Regards
    Kumar

  • Web Matrix FTP Remote Connection Error - "Connection Error - Failure to get file list from server. An entry with the same key already exists."

    Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
    "Connection Error - Failure to get file list from server. An entry with the same key already exists."
    I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
    is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
    All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
    Issue Persists....
    Thanks in advance,
    Justin

    Turns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
    This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages.

  • Invoking C# WS from java axis proxy generated from the same WSDL

    I am trying to transparently use the same java interface for invoking a java axis WS and a C# WS generated from the same WSDL interface.
    I believe the problem may be that the .NET web service which is generated from the WSDL file, is dynamically exposing a WSDL file which is not exactly the same as the original WSDL used to generate the abstract C# class with "wsdl.exe"
    When I try to invoke the C# web service with the java axis client I get the error message:
    "Server did not recognize the value of HTTP Header SOAPAction: ."
    Any suggestions about how to be able to use the same client interface from java, to invoke a C# web service and a java axis web service supporting (i.e. generated from) the same WSDL ?

    The JNI method name in the .h file is different to that in the .c file.

  • Limiting the time when Sales Orders can be confirmed on the same day

    Hello Gurus. The business has a requirement where they want to limit the time of the day when they can confirm sales orders on the same day.
    So, when they receive a sales order, they want that if the order is received after a certain time (e.g. 14:00) then it cannot be confirmed for that same day, it can only be confirmed the next day.
    How can I implement this limitation?

    Fernando,
    Let me restate your requirement so that I understand your question: 
    A Sales order is created 'today' with a requested delivery date of 'today'.
    There exists adequate material in Stock to confirm the order.
    You want the confirmed date to be 'some-amount-of-time-later-than-now"
    (say 18 hours or so)
    Which confirmed date in the sales order are you talking about?
    Confirmed Material Availability date?
    Confirmed Loading date?
    Confirmed Transportation planning date?
    Confirmed Goods Issue date?
    Confirmed Delivery Date?
    Many people with this requirement use 'delivery scheduling', and add a half day or so in pick/pack processing time.  This means that you are recognizing that it takes a bit of time to create the delivery notice, print the shipping papers, pick and pack the parts, and get them ready for the carrier to ship.  So, for an order entered 'now', it wouldn't be due to ship from your warehouse until 'a half day from now'.
    To enable Delivery scheduling  IMG>SD>Basic Functions>Delivery scheduling and transportation scheduling>Define scheduling by sales document type. Select the relevant ordertypes, tick delivery scheduling.
    If this is already selected, then you can increase the pick/pack processing time of the shipping point in IMG transaction OVLZ.  It can be set to a fraction of a day (2 decimal points).
    Regards,
    DB49

  • I am having trouble importing photos, gets stuck on the same photo each time?!?

    I am having trouble importing almost 3000 pics from my phone to my computer. Start up disk should be fine, cleaned it up before I began.  Import gets stuck on the same photo each time I try the import.  I have had to force quit a few times, and it can't seem to get past that same picture near the end.  Please help?!? It never gives me an error, it just keeps spinning and nothing is importing.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Will mac pro and monitors ordered together ship at the same time?

    Will Mac Pro and Thunderbolt monitors, if ordered together, ship at the same time? Or will they ship the in-stock monitors now initiating the Applecare start date for the whole order even though the Mac Pro is not expected to ship until sometime in March?

    I ordered the new Mac Pro (model 6.1) on December 18, 2013 along with a 27 in. Apple thunderbolt display.  The fully maxxed out new Mac pro shipped on January 8, 2014 and arrived January 13, 2014.  My Thunderbolt display shipped within 1-2 days of placing the order, i.e. the week of December 18th and arrived before Christmas.  A few days after receivng my new Mac Pro, I received the Apple Care paperwork and both the new Mac Pro and the Apple Thunderbolt display were listed with a start date of January 7, 2014, i.e. the day that my new Mac {ro was prepared for shipment -- not the day my thunderbolt display was shipped.
    Tom

  • Several plan orders for the same day

    Hi SAP Experts,
    In my company we have a requirement to produce the same finish material in two work centers, using different BOMs. This was achieved through production versions for production orders. Now we need to plan (Indipendent requirement & Plan orders )the material based on these two BOMs.
    We enter the indipendent requirement in MD61. I have given the production version against the requirement (In schedule lines tab). However i am unable to give two different requirements for the same day in different production versions.
    Then i tried using different planning versions and assigning the different production versions to different plan versions.
    Although my indipendent requirements are taken in different production versions(As I can see in MD04). When i run MRP plan orders are raised as the total of the requirements and in only one production version.
    Please, Can some one help me to find a method to raise different plan orders for the same day in different production versions???
    regards,
    Madhushika

    Dear All,
    I tried  quota arrangements as a solution for above mentioned problem. What i require is to devide the PIR for a particular day in to two equal parts in two different production versions so that two plan orders will raise in equal quantities for the same day in two different production versions.
    With quota arrangement what i get is alternative plan oders in different versions in diffrent days.
    For example If my PIR are
    Day 1 = 1000
    Day 2 = 1500
    Day 3 =  500
    Day 4 = 1000
    what i get is
    Day 1 = 1000  - prd ver1
    Day 2 = 1500  - prd ver2 
    Day 3 =  500   - prd ver1
    Day 4 = 1000  - prd ver2
    What i want is
    Day 1 = 500 -prd ver1
    Day 1 = 500 -prd ver2
    Day 2 = 750 -prd ver1
    Day 2 = 750 -prd ver2
    Day 3 =  250 -prd ver1
    Day 3 =  250 -prd ver2
    Day 4 = 500 -prd ver1
    Day 4 = 500 -prd ver2
    Hope its clear to you all.
    Please advise me how to configure the system according to this reqirement.
    Best regards,
    Madhushika

  • I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

    I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

    Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

  • HT4463 How do I get back to the same page I was on?

    When I have finished reviewing an app, if I click the back arrow in the top left corner it takes me back to the first page of the category. Not very user friendly when there are dozens of pages to click through to get back to where you were. How do I get back to the same page I was on?

    This is what I mean:  The users guide gives me all these instructions.  BUT, it does not give instructions to just STOP.  I don't
    Pause a song
    Tap .
    Resume playback
    Tap .
    Raise or lower the volume
    Drag the onscreen volume slider or use the iPad volume buttons.
    Restart a song or a chapter in an audiobook or podcast
    Tap .
    Skip to the next song or chapter in an audiobook or podcast
    Tap .
    Go to the previous song or chapter in an audiobook or podcast
    Tap twice.
    Rewind or fast-forward
    Touch and hold or —the longer you hold the control, the faster the song rewinds or fast-forwards.
    View album art full-size
    Tap the album cover when playing a song.
    I don't want to pause, resume playback, restart or any of these things.  i just want to STOP.  How do I do that?

  • While generating reports in Oracle BI Publisher in pdf format, the generated pdf reports have hindi  इ matra displaced by one character. For example, रिपोर्ट is printed as रपेिोरट.  Word file generated of the same report have correct hindi इ  matra positi

    While generating reports in Oracle BI Publisher in pdf format, the generated pdf reports have hindi  इ matra displaced by one character. For example, रिपोर्ट is printed as रपेिोरट.  Word file generated of the same report have correct hindi इ  matra position and also pdf generated from this word file also contains the same.

Maybe you are looking for