List of problems in PPRO CC 2014 I've encountered

Suggested by Adobe Care to post here.
Issues in PPRO
-General encoder issues where a render will stop part way through without a detailed description of whats happened.
-Play head in the timeline becomes unstable when scrolling with the mouse - timeline bounces around when zooming in.
-Red flash frames have been appearing when using the multi cam feature. Clearing the cache does nothing and restarting computer/PPro fixes for a short moment but the red flash frames always come back. The red frames appear in the render as well if rendering straight out of PPRO. Ways to counter the red flash frame is to import the sequence into AME and render that way.
-PPRO occasionally believes a file is frozen and will not play it properly or render it out. source file is fine and plays without a problem and even renders/encodes no problems when put into AME. Even if you remove the file from PPRO and then relink it, PPRO still believes that the file is frozen/unplayable. The work around is to transcode the file in AME to something else and replace the source file in PPRO.
-When zooming into the timeline the green audio waveform often disappears and then comes back after a moment. Bit difficult to pin point a specific beat to cut when the waveform is gone.
-Using masks with multiple effects for one video file will often cause the program viewer to make the video appear as though it has shifted partially off the screen to the right and down. Turning off the effects will bring the video back into the center of the program viewer.
-Can no longer copy or move multiple files in multiple bin at the same time. Previously I could select a file in 'BIN A' and a different file in 'BIN B' at the same time and move them together to 'BIN C' but now I have to moves each file individually.
-Importing bulk R3D or MXF folders with spanned clips no longer registers that the clips are spanned which means there are lots of extra folders with multiple duplicate clips getting imported. There is a work around where you can import the spanned clips properly but involves individually importing only one target folder at a time. Which is incredibly time consuming when you have a very large number of folders all with spanned R3Ds. Previous versions of CC prior to 2014 allowed bulk importing of spanned clips via the top folder had zero issues.
Issue in AE/AME
I have also encountered a strange issue when exporting a video using AME which was added from AE.
-I rendered a file from PPRO using AME which had zero issues - no flash frames. Imported it into AE and ran some Noise reduction over it and then added it to the media encoder so I could encode it as H.264 - The project in AE with NR had no flash frames. Once AME was finished with the render I played back the newly created file and noticed a flash frame where a single frame of video from the 5 min mark had been dropped right into another part of the video 7 mins down the line. The AE project had one file in the timeline and on further inspection did not have any random single frames floating around which would have caused the issue.
Cheers,
James

Hi Kevin thank for replying,
The projects have all been built brand new in the most recent versions of PPRO and AE.
PC
i7 3930K
Windows 8.1
32GB Ram
GTX 580 3GB
A lot of HDD space available
Premiere Pro CC 8.1 All abode software is up to date according to the Creative Cloud manager
Nvidia drivers up to date
-Source footage mainly Canon XF300 MXF 1080P footage, R3Ds when running into batch import spanned clips issue occasional DSLR Canon footage.
-Error messages - Error compiling movie - Mostly has had to do with PPRO thinking a clip is frozen as mentioned in the post above but has also occurred recently when exporting a project conststing of MXF and DSLR footage colour graded with colorista all running with in a multicam setup.
-Errors are generally sporadic in nature but PPRO freezing has become more constant with each update.
- Most of my issues are during editing, some of which have been detailed in previous post.
-3rd Party plugins for PPRO - Colorista and twitch from video copilot. both of which have been updated this year for CC 2014. AE has trapcode, a waveform plugin and other Video Copilot plugins installed, Trapcode was only installed a couple of days ago, after the recent issues.
-Avid codec pack is installed for DNXHD encoding
-Errors happening while editing, and on export.
Dont have any videos or screenshot examples.
If you need anymore clarification let me know, basically what I want to know is if uninstalling and re installing PPRO and AE is my only option or if there is a standard reset and reconfigure scenario I can look at doing. I suspect the batch importing issue along with the inability to grab multiple files from different bins at the same time is potentially a missing feature issue while the rest are bugs.
Once again thanks for getting back to me.
Cheers,
James

Similar Messages

SharePoint Online 2013 Workflows for one List stopped working after 07/08/2014

Our client host application in Office 365 SharePoint Online 2013, and we just found that all workflows for one list stopped working after 7, Aug 2014. It kept displaying pop-up message "Something went wrong. To try again, reload the page and then start
the workflow." when manually start a workflow for this List.
Tested workflow for other list, there's no problem.
Could anyone can help on this issue?

Our client host application in Office 365 SharePoint Online 2013, and we just found that all workflows for one list stopped working after 7, Aug 2014. It kept displaying pop-up message "Something went wrong. To try again, reload the page and then start
the workflow." when manually start a workflow for this List.
Tested workflow for other list, there's no problem.
Could anyone can help on this issue?

PPro CC 2014.2 on OSX 10.9.5 - Crashing

Is anyone else with the latest PPro CC 2014.2 update on OSX 10.9.5 and experiencing a significant amount of crashing? I only updated in hopes it would resolve some of the other issues that were bugging me from the previous release.
Some of the problems include:
- Random video freezes while playing a timeline.
- Random issues with the space bar not playing the timeline, or clicking the Program Monitor's play button. One instance had the video freeze and no way of stopping audio playback.
- Non-responsive Program Monitor, regardless of resolution.
- Issues quitting PPro itself with a long hang and "Application Not Responding" after several minutes that require a Force Quit in order to fully close. This likely is tied into the crashing aspect as I have not had this problem when opening the program, doing a minimal amount of work, and then quitting.
This appears to be GPU related and shows some of the symptoms of a memory leak, similar to how AE CC2014 was responding during audio scrubbing previously. Immediately after restarting, PPro is fine. After several minutes of usage, that's when issues occur.
Having PPro open with AE and/or PS at the same time makes the frequency increase quite a bit, but I cannot 100% replicate the issue every single time. I've forced render timelines so (theoretically) there should be no real taxing effort on the GPU, but even when the entire timeline is "GREEN" the issues are not going away.
Eliminating all effects, filters, etc is not a viable option or solution. I am working on finishing a timeline and that involves using effects. All effects have been updated and are the latest versions available.
These issues happen both after quit and after a hard restart (full shut down and power on). System is a MacPro "Mid-2012" with GTX 680 (official version) running OSX 10.9.5. Have switched the NVIDIA driver from the NVIDIA version to the OSX version (via the NVIDIA Driver Manager Preferences) and the same problems persist regardless of the driver choice.
I've been holding off on the 10.10.X update, but at this point may have to give that a shot when I finish this current project.

I have submitted at least 4 crash reports when they have come up and resulted in the prompt to submit them. I do not have hard copies of them accessible currently. I know that two of them resulted in PPro being unable to save the current state of the project and at least the other two were "recoverable" after the prompt that an error was encountered and the project would be saved. A bug report has also been submitted.
This is extremely reminiscent of the AE CC2014 behavior that seemed to "build" to a GPU-related memory leak crash after scrubbing audio. With that memory leak the system started to feel sluggish, performance dwindled, then the software would either crash or lockup - sometimes with a crash prompt, other times completely unrecoverable. That's the same behavior that I'm experiencing with PPro CC 2014.2 currently.
At this time I have not switched the render to software only, though that will be the next step. A few effects/plugins are GPU accelerated and I really don't want to lose performance. I also have not rebuilt the project, exported XMLs and re-imported, or any of the other typical workaround solutions. I am just trying to get a project finished and meet a deadline - those methods more often than not require rebuilding a lot of the finishing parts of a project.

Long List of Problems and no one will help!!!

I have had NOTHING but problems with this phone since the sales clerk talked me into buying it. I've had it for a little over a year and a half. It's had "Software" issues out the rear and it's been replaced and still has the very same issues. YET I can't swap it out with another phone without paying through the nose for a new one. Verizon sold me a phone that does not work completely. Verizon keeps replacing it with the same phone and numerous Verizon employees keep telling me that this phone has MANY known issues, LOTS of complaints. Yet I am still stuck with a phone that is barely useable. I am so disgusted right now.
Here is just a SMALL sampling of issues with my phone and I am still being denied a new phone unless I want to pay $600. I have 4 weeks until I can "Upgrade" and I still can't even get an early upgrade. I have been VERY patient waiting for my "TWO YEARS" to be "UP" so I can upgrade without being robbed. This in addition to suffering through the Black Berry Storm that SUCKED and was replaced 7 times in a year and a half period due to "Software issues" I will admit, two of those replacements were my fault - one got wet and the other was stolen, but still, 5 replacements is not acceptable. Then I went to buy my new phone (Glory day for me) then I get talked into this Fascinate and it's just as bad as the Storm was, if not worse. I can't seem to win. I have decided to go for an iPhone.
Here is my list of problems and NO one can fix them, no one can help, I get told that this is a known problem yet Verizon won't take care of their customers that got screwed by this phone. I've been a loyal customer for 7 years. I love the actual cellular service, I rarely get dropped calls, which is why I stick with verizon, but I am seriously considering jumping ship, because even though I'm loyal, I buy my phones through them, I can't get support.
The SHORT LIST of problems that makes this phone 100% unacceptable:
1) Can't text 3/4 of the time because a little grey box pops up in the text box and it won't accept anything I type into it.
2) Have not been able to send picture emails for several months now - Verizon can't figure out why. My husband misses out on a lot of pics of our kids, I like to text him fun pics of them doing things or when we are on vacation without him.
3) phone freezes up on a regular basis. Several times a day. I have to pull the battery out and reboot.
4) Sometimes I can't answer the phone when it rings - the phone rings and when I slide the puzzle piece to answer the phone, it freezes and continues to ring long after the person has hung up and the only way to get it to stop ringing is to pull the battery out and reboot the whole thing.
5) a LOT of times, people will call my phone and it won't ring - it goes straight to voicemail. I have had people call me when they are sitting right next to me and it doesn't ring (and yes, I've checked the volume, it's on, the phone is on) sometimes though, it rings and I actually can answer it, but lately, it's becoming more and more of a problem being able to receive and actually be able to answer them
6) I can't use Facebook. It takes forever to actually get into FB and when I do, it only shows about 5 posts before it freezes. A few weeks ago, I could post to FB but only here and there, now I can't post from FB from my phone at all. I know that's likely due to the APP - but FB on this phone has always sucked.
7) At home, even when I standing next to my wireless router, it says I have "Lost Signal", yet all of my other wireless devices work from 5400 square feet away, on the other side of the house, upstairs. Even when I'm standing in the Verizon store, it says "Internet Connection Lost" It is so frustrating. I am a busy mom and I have 5 minuts to myself and I can't even check FB or browse on the internet and yes, I have checked, all of my connections are set up correctly. My wireless is enabled on my phone. But it still doesn't work.
8) Email - it's constantly refreshing, even though I have it set to only refresh once and hour. I think I even changed it to once a day. Instead, that little "refresh wheel" spins constantly on my phone and while this little refresh wheel spins, I can't read email, I can't write email and I can't send email. When it finally stops and I open an email and the try to respond and write back, that little refresh wheel starts spinning again and then I have to wait until i can get home to a real computer to actually read & Respond to email.
9) Calendar inputs the wrong time. I had a dentist appt at 9:30am. I set it as 9:30am. When I saved it, it changed it to 10:40am. I went back into the calendar function to change it thinking I had input the wrong time, but no, when I went to edit it, my 9:30 time was set, I hit save again and saving it changed it to 10:40. WTH? I can't even rely on the calendar function.
10) Two weeks ago, I woke up, looked at my clock, which I also rely on as an alarm clock. The room was dark. The clock said 5:30am. But for some reason, it felt later. Sure enough, I get up, check my husbands alarm clock, it's 7:30am. I am so thankful I had a gut feeling and looked at another clock. I did not change my time zone on my phone (in fact, I went looking for Time change stuff and I couldn't even find it. Then two hours later, the phone went back to normal time all on it's own.
11) Text messages occasionally pop up and it tells me it's from Jay Smith (Not real name) and when I open the actual text, it's from Sarah Jenkins (not real name) WTH? How am I supposed to rely on text if its confused itself?
12) Phone shuts itself off all the time, several times a day. All of a sudden I will hear the musical tone of my phone shutting down and then at some point, it will turn itself back on. When I turn it back on, it resends out old text messages (See below)
13) Text message randomly sends out old text messages to people that I sent text messages out to months ago. So the people will text me back saying "WTHeck is this about?" and I look and it's an old text message I sent them a month or two ago. It usually does this when the phone freezes, shuts itself down and restarts. I have found out that IF I delete my text messages timely, then it won't resend out any old text messages, but I am not very good about deleting stuff and often times, text message contains some important information that I haven't yet had the time to copy down and save. I shouldn't HAVE to delete my text messages so it doesn't randomly send out text messages to people.
14) Often times, I will send out a text message and it will fail to send the message and I get a text message saying my text message has failed.
I could go on, but I think that will give sufficient evidence that this phone stinks and that Verizon should give people owning this phone a chance to get a new phone without raping their wallets.
Maybe someone here will listen? Because no one at the store does... I pay for Verizon service that I barely even get to use because my phone doesn't perform like the guy who sold it to me told me it would.
CAN YOU HEAR ME NOW????

About the only thing I can say is to keep going to Verizon, or calling customer service to get them to look at the issues. I talked to 1 rep that told me to dial either 4# symbols, or 4* symbols (Can't remember which it was) after I got the VM message but did not have the phone ring, so it would mark my account record and they could search and troubleshoot the issue.
As far as your upgrade, I think you have done the right thing so far, and that is signing up on this forum, that way you can look at the different phone forums and see what issues that people are having. Talking to people that have the phone is a great way to find out what the issues are. Verizon Sales reps will only sell you the latest and greatest, or if there is something that they are being told to push to get out of stock.
Going with an iPhone is ok, just make sure it is correct for you, because like you said earlier, once it is done, it is done and you are stuck with it for 2 years. I had a friend who made a knee-jerk reaction to a bad phone, and did the same thing. They regretted it after 6 months. I am not saying the iPhone will be bad for you, just make sure you do your homework.

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

Attachment list printing problem

I am using the Entourage mail program. How does one get the box that lists the file names of attachments to a message to print out as part of the message? I just want to have a printed copy of the list--not the contents of the attachments called out in the list.
For instance, I send out a message with a series of attachments listed in the box below the subject line, but when I print out the message I have sent, the attachments are available when the paper clip is clicked, but are not listed when a copy of the sent message is printed.
Thank you.

Hi Experts,
Could you please let me know,which format has to be selected, my report is exceeding 255 characters.
Z_65_1032         Format for 65-1032 columns
Z_FREE_SIZE      Free size
Formats suitable under certain conditions:
X_PAPER          ABAP/4 list: Default list formattin
X_SPOOLERR       ABAP list: Spooler problem report
X_65_255            ABAP/4 list: At least 65 rows with
X_58_170            ABAP/4 list: At least 58 rows by 17
X_65_132           ABAP list: At least 65 rows by 132
X_90_120           ABAP list: At least 90 rows by 120
X_44_120          ABAP/4 list: At least 44 rows by 12
X_65_80            ABAP/4 list: At least 65 rows by 80
Regards,
IFF

Long list of problems I had, culminating in iPhone no longer powering on.

So, let me start off by saying, there is no Apple Store available save by taking a plane to another island.
Anyway, awhile back when I updated my phone to a new version (I don't remember which), a bunch of things started happening.
1. No WiFi, it was grayed out, and inaccessible.
2. Would not ring if someone called me while the phone was on standby, except sometimes if it was plugged in and charging.
3. Calls would sporadically fail, and signal strength would alternate between full bars to none, to showing "No Service", and sometimes would show "No Sim". I could usually (not always) get service or signal strength back by toggling airplane mode on or off, but the only way to get rid of "No Sim" was to power it on and off.
4. Clock would always show the wrong time. It would seemingly stick at say... 3:40.. even though it was 6:00, then suddenly before my eyes jump forward 2 hours to the right time or still a bit behind. This also caused the alarm functions to not work, because it would usually skip over the time it was supposed to go off.
5. Error messages would occasionally flash on the screen, but disappear so quickly as to be nearly unreadable, sometimes saying "Please connect to iTunes" but it hadn't done that one in awhile.
6. A general sluggishness at times, also weird delays on sounds or none at all. I.E. I'd take off standby (wouldn't make swish sound), start to type a text message, only there'd be no sound while typing, but then 30 seconds later it'd make the swish sound it normally makes as you take it off standby, and resume clicking when typing.
Restoring it through iTunes would not help at all.
Anyway, so today, I tried restoring it like 6 times in a row out of pure frustration, and it like got stuck in recovery mode while rebooting, and when iTunes was restarting it, it just turned off.
The iPhone will no longer turn on, even when plugging it in to my computer or to the outlet charger, no matter if I hold power or home button or both.
Update: I just got it to power on again, about an hour after I was last trying fruitlessly. I restored it again, so it's "working" albeit with the long list of problems above still.
Message was edited by: Dryesias
Message was edited by: Dryesias

If you regularly sync your iPhone, you won't lose ANY info when restoring.
iTunes creates and maintains a backup of your iPhone - which is updated if needed as the very first step during the sync process. The backup stores all your iPhone settings, SMS messages, notes created with the Notes application, recent calls, call favorites, visual voicemail messages, and photos captured by your iPhone - basically all data stored on your iPhone not included with the sync process.
Your iPhone has not died - not yet, but it has developed a problem which requires a Restore.
It isn't required to have an Apple Store near you. This can be handled over the phone by calling AppleCare (800) 694-7466, but I venture to say that AppleCare will try to troubleshoot the problem over the phone before having your iPhone picked up for inspection and testing, which will very likely include a Restore just as the error message provided indicates. You can do it now, which will probably resolve the problem, or wait and do it when calling AppleCare.

Problems installing Illustrator CC (2014) and InDesign CC (2014) on OS X Yosemite

I'm currently having problems installing Illustrator CC (2014) and InDesign CC (2014) on OS X Yosemite. Both applications fail with the message "Installation Failed: The download appears corrupted. Please try again after a few minutes.(-60)".
I've tried uninstalling Illustrator CC and InDesign CC and then reinstalling, but still get the same error message. Other applications in Creative Cloud all install without issues.
Has anyone else experienced this issue and resolved it please?

Sorry for the slow response. My Mac wouldn't boot following a failed Yosemite update. I've since reinstalled Yosemite but the exact same problem persists. My Mac is standalone and not on a managed network.
Thank you for the troubleshooting link. I've tried the recommended fix for the -60 error but it doesn't appear to be possible to download the trial version of Illustrator or InDesign for CC editions. They just trigger the Creative Cloud installer and shortly after the -60 error again.
The problem is still specific to Illustrator and InDesign and I've tried uninstalling all Creative Cloud applications and reinstalling. Every reinstalls except InDesign and Illustrator.

Problem with Indesign CC 2014 and tables

Problem with Indesign CC 2014 and tables. The text rearranges itself when I delete or add something in a table; the footnotes to the text associated with the overlap even getting unreadable. Just click on the chain symbol in the window and everything is fine. Why?

try circumventing your cc app and see if that helps:
if you follow all 7 steps you can directly download a trial here: Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Problem installing Indesign CC (2014) - in log - Failed in key3List generation

Trying to install InDesign CC (2014), all other apps worked no issue with Creative Cloud. Illustrator, Photoshop, Dreamweaver CC (2014) all no problems.
I keep getting there was a problem installing InDesign CC (2014) with the error Installation failed. Unable to extract to temp directory, Please contact customer support. (EX11)
There is adequate disk space, no security issues with folder, have tried disabling Norton, on admin account.
I guess maybe the next step is to uninstall Creative Cloud and run cleaner as a last possibility.
Any other thoughts?
Thanks,
Brian

I am also having the exact same issue. During installation, the CC App was unable to extract to a temporary directory. Please contact customer support (EX11). In my searches to resolve this issue someone pointed me to http://prodesigntools.com/adobe-cc-2014-direct-download-links.html to download CC apps manually. I was still having issues installing the program that way as well. When I extract the files to install an error in copying the files occurs. (Error: 0x80004005 Unspecified Error)
Thanks.
Edit:
I am using Windows 7
After troubleshooting the process with adobe customer support, The few key things that made the install successful for me were thus...
1: Find your windows temp folder (press windows key+r) and type %temp% and hit ok. Find your temporary install and delete it and any copies you might have.
2: Make sure you have winzip, winrar or some other file extraction program.
3: Re-download InDesign from your CC app, and if/when it fails go back to the temp folder. (Do not try to download InDesign from the CC app multiple times.)
4: Extract your install in the windows temp file if necessary, and install manually through the installer in your temp folder.
5: The file should install without problems as this point, and proceed to update indesign.
This worked for me. If this does not work for you, customer support is available with your Creative Cloud Membership.
Best of luck!

Problem update indesign cc 2014 (October)

problem update indesign cc 2014 (October) Adobe Creative Cloud install version 10.0.0.070 not 10.1.0 (windows) I do not understand, It seems there are no other updates ... thanks for answers

My apologies for my english.
my computer is a samsung gamer 7, Windows 7 sp1. i want install the last version of indesign, i dont know. is a computer problem?
thanks
Valerie

PPro CC 2014 Crashes and More Problems

Posted on Twitter and Adobe Help said to post our issues here....
Ever since we've updated to CC 2014 we have lots of issues on our systems:
1. Routine crashes.
2. System really lags, especailly after having PPro open for a few hours - btw, talking the entire computer slows down, along with PPro.
3. PPro won't OPEN some previously saved projects (saved in CC 2014). It tries to open them and then at 99% there the program crashes. This has been scary.
4. When we shut PPro down it often won't shut down completely and has to be Forced Quit.
We've been very happy with CC, and so hopefully Adobe will update the software soon so they don't lose they're goodwill.
Btw, this is happening on three computers... a two-year old iMac, a six-month old iMac and a brand new Mac Pro.

Hi,
Please go to following location move the Adobe folder to desktop,
User Library >> Application support>>
User Library>> Preferences>>
Make sure you're in user library not in system Library.
Access hidden user library files | Mac OS 10.7 and later
Please rename the Adobe folder in documents to old.adobe
Now try and launch.
Hope that helps.
Thanks
Mohd Naseem.

Problem installing SQL server 2014 Express Edition on Windows 8 32 bit

Installation stops at a certain point and do not progress any further.
Here i am attaching an image for the scenario.

Hello Sir,
Actually there is no error while installing that, at this point progress of installation stops.
But now I installed the LocalDb Component of sql server 2014 stand alone.
And trying to install management studio using "SQLManagementStudio_x86_ENU_2.exe" .
But same problem no progress in installation after a certain point.
Following is the content of Summary.txt.
Overall summary:
Final result: User cancelled
Exit code (Decimal): -2068380094
Exit facility code: 1207
Exit error code: 1602
Exit message: User has cancelled.
Start time: 2014-06-01 21:26:31
End time: 2014-06-01 21:26:41
Requested action: Install
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: F:\Softwares\Sql Server\Sql Server 2014 Express\SQLEXPRADV_x86_ENU\x86\setup\
Installation edition: Express
Product Update Status:
Failure to check for updates.
Error message:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException
Message:
SQL Server setup failed to search for product updates. This may indicate that the Windows Update service does not have online access to the Microsoft Update server or Windows Server Update Services.
HResult : 0x85190003
FacilityCode : 1305 (519)
ErrorCode : 3 (0003)
Data:
SQL.Setup.FailureCategory = ActionFailure
Stack:
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(ActionWorker workerDelegate)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
Inner exception type: Microsoft.SqlServer.Configuration.SmartSetupExtension.MuSearchException
Message:
SQL Server setup failed to search for product updates. This may indicate that the Windows Update service does not have online access to the Microsoft Update server or Windows Server Update Services.
HResult : 0x85190003
FacilityCode : 1305 (519)
ErrorCode : 3 (0003)
Data:
WatsonData = Microsoft.SqlServer.Configuration.SmartSetupExtension.MuSearchException@3
Stack:
at Microsoft.SqlServer.Configuration.SmartSetupExtension.MuSearchUtility.TrySearch(String serviceId, String query)
at Microsoft.SqlServer.Configuration.SmartSetupExtension.MuSearchEngine.Search(String serviceId, String query)
at Microsoft.SqlServer.Configuration.SmartSetupExtension.MuSetupSearchEngine.SearchUpdates()
at Microsoft.SqlServer.Configuration.SmartSetupExtension.SearchUpdatesAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.<>c__DisplayClasse.<ExecuteActionWithRetryHelper>b__b()
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(ActionWorker workerDelegate)
Inner exception type: Microsoft.SqlServer.Configuration.SmartSetupExtension.WuaUpdateSearchException
Message:
Failed to search for updates with query 'CategoryIDs contains '892C0584-8B03-428f-9A74-224FCD6887C0''. Error: Exception from HRESULT: 0x8024001F
HResult : 0x85170004
FacilityCode : 1303 (517)
ErrorCode : 4 (0004)
Data:
Query = CategoryIDs contains '892C0584-8B03-428f-9A74-224FCD6887C0'
ErrorMessage = Exception from HRESULT: 0x8024001F
WatsonData = Microsoft.SqlServer.Configuration.SmartSetupExtension.WuaUpdateSearchException@4
Stack:
at Microsoft.SqlServer.Configuration.SmartSetupExtension.WuaUpdateSearcher.Search(Int32 timeout, String criteria)
at Microsoft.SqlServer.Configuration.SmartSetupExtension.MuSearchUtility.Search(String serviceId, String query)
Inner exception type: System.Runtime.InteropServices.COMException
Message:
Exception from HRESULT: 0x8024001F
HResult : 0x8024001f
Stack:
at Microsoft.SqlServer.Interop.WUApiLib.IUpdateSearcher.EndSearch(ISearchJob searchJob)
at Microsoft.SqlServer.Configuration.SmartSetupExtension.WuaUpdateSearcher.Search(Int32 timeout, String criteria)
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES:
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: true
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\120\Setup Bootstrap\Log\20140601_212620\ConfigurationFile.ini
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CancelException
Message:
User has cancelled.
HResult : 0x84b70642
FacilityCode : 1207 (4b7)
ErrorCode : 1602 (0642)
Stack:
at Microsoft.SqlServer.Configuration.UIExtension.Request.Wait()
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.SubmitAndWait(Request request)
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.NavigateToWaypoint(String moniker)
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceService.Waypoint(String moniker)
at Microsoft.SqlServer.Configuration.UIExtension.WaypointAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.<>c__DisplayClasse.<ExecuteActionWithRetryHelper>b__b()
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(ActionWorker workerDelegate)

Help with PPro CC 2014.1 and Blackmagic Mini Monitor

Hello everyone
I just installed a Decklink Mini Monitor card for use with Premiere Pro CC 2014.1. I installed the latest card drivers and updates and all is working fine. I set Premiere playback settings to Blackmagic output, navigated to the Blackmagic control panel and set default video standard to 1080 50i and then I created a new Blackmagic YUV 720p 50p project. The footage used in my project is 720 50p and 1080 50i. What puzzles me is that although I have output for both the above formats when either is placed on the timeline (program monitor) I only get preview of the source monitor when the footage loaded to it is 1080 50i, no external preview of any other footage, not even 720 50p. Any ideas on this? I even tried switching default video standard output to 720 50p with no luck and I get the feeling it's a Premiere issue, because the footage loaded to the source monitor on both Avid's MC 8 and Grass Valley's Edius 7 works jist fine. Any help will be greatly appreciated :-)

Ok, since I found the solution, I felt I should share. It turns out the problem was from withim PPro. I had to navigate to Edit > Preferences > Playback, then go to the Blackmagic Setup option and select either "Scale to fit" or "Centered" at the "unsupported format" option.

PPro CC 2014 - Audio is a nightmare with plugin handling

Whilst PPro CC handles 34rd party VST plugins perfectly & as far as I can tell flawlessly in both VST2 and VST3 formats the same simply cannot be said for CC 2014.
We seem to have gone backwards with this release, as once again I seem to be stuck in a situation where once some arbitrary limitation has been reached it all goes pear shaped on me - again.
We will begin with VST2 plugins, the first ones scanned.
This gets halfway down my UAD Powered Plugins, to the Neve 31102 Console EQ (in alphabetical order) and no more are recognized whatsoever (needless to say they are all available in PPro CC).
I would guess that perhaps 2/3 of my VST2 plugins are simply not even scanned.
Same problem arises with VST3 - so many are simply missing or not scanned.
I have filed this as a bug report but it just gets marked as closed each time I try.

Thanks for the quick response, Mr. Haugen. So I tried that. It kind of works, and it'll have to do for now just so I can finish up.
Opening up a previous auto-save actually does the same as the main project file I'd been working with. But like I mentioned, if I open a working project file first and then this one, it does allow me to play back. The auto saved one at least let's me make edits and export without freezing. But I still can't switch over to another timeline, otherwise it freezes again. So, problem not really solved, but I'll kind of walk on eggshells as I work just to complete the edit, and then hopefully never have to come back to this project file again if I can't figure out the issue completely.
I'm still open to more suggestions if anyone has them!

List of problems in PPRO CC 2014 I've encountered

Similar Messages

Maybe you are looking for