List population - urgent
Hello,
I have a poplist which I am populating, in NEW_FORM_INSTANCE, using Record Group. But when I am running the Form, I ma getting error: FRM-41337, unable to populate the list. I tried deleting and adding the list again, giving initial value...etc. The strange thing is that it was working fine previously and suddenly this error popped up..
Please help..
Thanks in advance..
Anoop Joseph
I do not got your point clearly. Anyway It should work fine if the record group is valid. Please verify the elements in the list
like LSTnnn and remove the same. Save the form and close the builder. Invoke the builder and open the form and run it
again. If you get the error please revert back by explaining the situation in brief.
Similar Messages
-
Strange Problem in dynamically list population with record group
Hello Room,
I am dynamically populating a single list with 2 record groups. I am having a strange problem. All the code are written in 2 seperate buttons. The code of every button is given below.
Button 1 code:-
DECLARE
rg_reports RECORDGROUP;
rg_name VARCHAR2(40) := 'REPORTS';
vTemp NUMBER;
BEGIN
-- Pls make sure Group doesn't already exist
rg_reports := FIND_GROUP(rg_name);
-- If it doesn't exist then create it and add ur query to it
IF Id_Null (rg_reports) THEN
rg_reports:=CREATE_GROUP_FROM_QUERY(rg_name , 'SELECT companyname,to_char(co) from companymaster order by companyname');
end if;
--Populate the Record Group
vTemp:=POPULATE_GROUP(rg_reports);
POPULATE_LIST('REPORTS.EXAMPLELIST', rg_name);
Delete_Group( rg_reports );
END;
Button 2 Code:-
DECLARE
rg_reports RECORDGROUP;
rg_name VARCHAR2(40) := 'REPORTS';
vTemp NUMBER;
BEGIN
-- Pls make sure Group doesn't already exist
rg_reports := FIND_GROUP(rg_name);
-- If it doesn't exist then create it and add ur query to it
IF Id_Null (rg_reports) THEN
rg_reports:=CREATE_GROUP_FROM_QUERY(rg_name , 'SELECT accountname,to_char(co) from accountmaster order by accountname');
end if;
--Populate the Record Group
vTemp:=POPULATE_GROUP(rg_reports);
POPULATE_LIST('REPORTS.EXAMPLELIST', rg_name);
Delete_Group( rg_reports );
END;
The code is same here only the sql is different in these 2 buttons. Now the problem point.
when i press button 1, I get the list populated ok. when i try to click on the list item and keep the button pressed the list gets scrolled properly.
when i press button 2 after that i get account names well populated in the same list item as well, but this time, when i keep the button pressed the list does not scroll below as in button 1. It does not even allow to select different item from the list of button 2 code.
I tried to clear cache, cookies, exit browser everything and try to run the button 2 first, but still the problem in button 2 code.
Following are my system details.
windows 7 professional edition.
Oracle database 11g on windows 7
Oracle forms 10g patchset 10.1.2.0.2 on windows 7
Browser Netscape Navigator with oracle jinitiator 1.3.1.22
But this form is run by a client side html file where oracle forms 10g is not installed on windows xp. html file is just referring server url to run the module. The file is run on Netscape navigator browser with oracle jinitiator 1.3.1.22
My question is that is this a bug ? if button 1 gets the list item scrolled, why is the problem with button 2 even though i press it first. Here I am deleting the record group also. after the code is over. Initially I thought this may be the character length problem so I took the maximum character length for that list item as given by the 2 columns in database.
Why is the list scrolling not happening in button 2 but in button 1 with same codes on both ?
Anybody please help me.The problem is the second query. I would guess that the TO_CHAR(co) is not unique for each account, but is the same for the accounts. And as the second item in the select-list is the listitems values, all your listitem-entries have the same value. therefore, of you select any entry, the list will always go the the first entry again.
Adjust your query. -
How are the pWWN list populated in DCNM even before they are logged-in to the switch?
Hello All
DCNM v6.2.3
I see that the hosts are not logged-in to the switch, however via DCNM when I try to create device alias I find the pWWNs populated which are not logged-in. How are the pWWN list populated in DCNM even before they are logged-in to the switch?
Thanks
ChetanThis is definitely not happening automatically ? would be magic ! you can do it of course manually.
-
[svn] 3246: Fix fasttrack bug SDK-16910 - Simple List populated with strings throws RTE .
Revision: 3246
Author: [email protected]
Date: 2008-09-17 15:31:25 -0700 (Wed, 17 Sep 2008)
Log Message:
Fix fasttrack bug SDK-16910 - Simple List populated with strings throws RTE. This is fallout from the Group/DataGroup split. DefaultItemRenderer now uses a TextBox instead of a Group to show the list data.
QE: Any List tests that depended on the default item renderer to support anything other than text must be updated.
Bugs: SDK-16910
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16910
http://bugs.adobe.com/jira/browse/SDK-16910
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/DefaultItemRenderer.mxmlBTW, I do not experience the bug you had mentioned at
http://www.cs.rit.edu/~cxb0025/flex/TreeControlBugs.html
Can submit a video of my actions recorded -
Report- formatting of output list. -urgent
Hi experts,
i have done report in where i hv to display more than 20 fiedls to display. I report output list is around 300 chacertes when i am prinint the report it is printing only 132 chac per page. Remaring 168 is not printing. How can i do this one. How to print total ouput in page. The max size of print page is 132 chac .
its and urgent requiremnt to me.
<b>useful answers surely awarded with points</b>
regards,
sunil kumar.Hi ,
At start of the report program add LINE SIZE which will be required for your display examople
REPORT ztest_rep NO STANDARD PAGE HEADING
LINE-SIZE 1023 .
Above id the "ztest_rep program and line size will define the number of the characters that will be output as in this case it will be 1023 char...
Reward points if usefull....
Message was edited by:
SOURABH MALHOTRA -
Cannot navigate to the elements of a T-list populated at runtime
I'm populating a T-list dynamically at runtime using a query. The list gets populated without any error at runtime. I'm using the following program unit to populate the list :
DECLARE
v_recsql Varchar2(1000); -- The SQL for creating the Record Group.
v_recgrp RecordGroup; -- Record Group
v_status Number; -- Return Value of Populate_Group function.
BEGIN
v_recsql := 'SELECT setup_code, description
FROM setup_types
WHERE organization_id = :parameter.org_id
ORDER BY setup_code';
-- Create the Record Group
v_recgrp := CREATE_GROUP_FROM_QUERY('v_recgrp', v_recsql);
IF NOT ID_NULL(v_recgrp)
THEN -- No Error, record group has been successfully created.
-- Populate Record Group
v_status := POPULATE_GROUP('v_recgrp');
IF v_status = 0
THEN -- No Error. Record Group has been Populated.
POPULATE_LIST('b_res_setups.setup_code', 'v_recgrp');
message('Populated the list successfully');pause;
END IF; -- IF v_status = 0
-- Delete the Record Group as it is no longer needed.
DELETE_GROUP('v_recgrp');
END IF; -- IF NOT ID_NULL(v_recgrp)
END;
The problem is when i use the above program unit, then after populating the T list i'm unable to navigate to any element of my choice using the mouse. The focus returnes to the first element everytime i click any other element.
My query is :
v_recsql := 'SELECT description, setup_code
FROM setup_types
WHERE organization_id = :parameter.org_id
ORDER BY setup_code'
But when i use the following query to populate the record group there's no problem.
v_recsql := 'SELECT description, setup_code
FROM setup_types
WHERE organization_id = :parameter.org_id
ORDER BY setup_code'
In the table setup_types the column setup_code is a not null column i.e. it cant have null values, whereas the column description can have null values.
Please help,
Abhishek.There is unique constraint or index on SETUP_CODE column?
Probably, the list contains duplicated values. -
Dynamic Select List population
I have 2 lists on my form.
First one is populated from LOV...based on the value that is chosen in the first Select List I would like to populate the second LOV. Is this possible?
for example...First Select List has Company Id, Company Name. So to populate the second one I want to use the following query: select event_type_id, event_type_dec from event_type where company_id = "company_id from first select list".
Thanks.Hello,
Take a look at this
How to make LOV's reference other LOV's on the form page
Carl -
hi,
i am working with oracle forms(6i).i want to display a list of items in a listbox.the items in the listbox are from a textbox(i.e,when a button is pressed the value in the textbox should be placed in the listbox).
help me urgent..Hello,
Use the Add_List_Element() built-in.
Search in the Forms Builder on-line help (Ctrl+H)
Francois -
PWA - Access error when using a drop down list populated by SharePoint list
I am using PWA 2013. I have a list of future projects. On the form for a future project I have a department field. That field is a drop down that pulls from a Sharepoint list of departments. When I try to use the Create Projects button from
an item on the future project list it fails and gives me the error: "Sorry, you don't have access to this page". If I delete the department dropdown field off my form then the create project button functions normally and gives me the field
mapping prompt. I have full control as an admin to the project web app site which is what comes up if I request access and then go in and grant myself access. This is the same problem for everyone except the person that setup Sharepoint so that
makes me think I am missing a critical permission. I tried Site Collections admin and it didn't make a difference.I'm not sure if I understood your question clearly but here is a good resource on how to get attributes from "GetUserProfileByName" web services:
http://blog.mangroveweb.com/pre-populating-an-infopath-from-with-mysql-data-using-a-net-web-service/using-sharepoints-getuserprofilebyname-web-service-to-retrieve-ad-account-information/
Regarding filtering dropdown list then this could be done by applying form on-load rules.
Hope this helps -
I have two select lists.The first one holds the column names of a table and the second one should populate all the distinct values of the column selected in the first list.
In the second select list I have written a query like
SELECT DISTINCT V('P4_TOP_SEARCH') p,V('P4_TOP_SEARCH') r FROM INTERVIEW_DETAILS
where 'P4_TOP_SEARCH' is the session state value and is a column of a table.
I am not getting values but the session state value is populated in select list
Is there any way to do it.Is there anyone to help me out.
-
Header is not coming in alv list display- urgent
hi all,
i am sending my code below....
my requirement is in selection screen i have 4 radio buttons . if i click 1 radio button it will duiisplay data and and its header. report is working fine. my requirement id when i click r_mssng radio button(missing radio button) it is showing data correctsly. here i want to show header as 'Missing details report'.
this is not coming in my report. anybody can suggest me.
i am sending my code below....
report zvra0001ftb13 message-id zv.
Confidential and Proprietary
* Celestica Corporation
* All Rights Reserved
*ABAP Name: ZVRA0001FTB13
*Created by: Srinivasa Chakravarthi
*Created on: 26/03/2003
*SAP Version: 4.6 C
*Description: This report displays details of foreign trades
and EHS based on the deliveries made to the outside
countries.
*Input: Selection Screen Criteria includes country of
origin,Company code, Sales Organisation,
Ship-to-party, Sold-to-paarty, Goods movement date,
Invoice number, Invoice type, Material , Material
Type, Exporter ID, Province of origin.
*Output: ALV output that contains Mode of Transport, Export
HS number, Commodity Description, Quantity, UOM,
Value, Country of Destination, Goods Origin
*Dependency: Nil
*Modification Log:
*CR# Date Coded Transport Description
*====== ======== ========= ============= ===============================
*5147 26/03/2003 Srinivas ED1K922286 New Development
*8700 02/11/2004 H.Arular ED1K938380 To check if entries of Comm
Code(HS code)is less than 8
digits and give a warning
message.
*18684 25/07/2007 MAHEEDHAR Merge the logic from report
ZVRA0001FTB13_ERROR into
report ZVRA0001FTB13 and
added two radio buttons
called missing data and non
missing data, addedc logic
accoriding to the radio
buttons.
*Declaring Tables.
tables: likp, "Delivery document Header
lips, "Delivery Document Item
vbfa, "Sales document Flow
bkpf, "Accounting Document Header
eikp, "Foreign Trade:Export/Import Data
eipo, "Foreign Trade:Export/ Import
"Header data
t618t, "Forein Trade:Mode of Transport
"Description
t604t, "Foreign Trade: Commodity Code/
"Import Code number Description.
mara, "Material master data.
t005, "Countries
t001, "Company Codes
tvko, "Sales Organisations
kna1, "Customer Master
t003, "Document types
t134, "Material types
tvfk,
konv,
vbrk.
constants : c_rep like vbrk-fkart value 'YGFB',
c_for(10) value 'Foreign'.
*Decalre Type pool for ALV
type-pools: slis.
*Type declaration for LIKP.
types: begin of t_data1,
vbeln like likp-vbeln, "Delivery
kunnr like likp-kunnr,
end of t_data1.
*Type declaration for LIPS,VBFA.
types: begin of t_data2,
vbeln like lips-vbeln, "Delivery
posnr like lips-posnr, "Delivery Item
vbelv like vbfa-vbelv, "Preceding SD document
posnv like vbfa-posnv, "Preceding item of SD document
matnr like lips-matnr, "Material Number
meins like lips-meins, "Base unit of measure
lfimg like lips-lfimg, "Actual Quantity Delivered
mtart like mara-mtart,
end of t_data2.
**Type declaration for BKPF.
*types: begin of t_data3,
belnr like bkpf-belnr, "Accounting Documnet number
bukrs like bkpf-bukrs, "Company Code
end of t_data3.
*Type declaration for BKPF.
types: begin of t_data3,
vbeln like vbrk-belnr, " Billing Doc
fkart like vbrk-fkart,
land1 like vbrk-land1,
end of t_data3.
*Type declaration for EIPO.
types: begin of t_data4,
vbeln like lips-vbeln, "Delivery
posnr like lips-posnr, "Delivery Item
matnr like vbrp-matnr,
fkimg like vbrp-fkimg,
meins like vbrp-meins,
verld like eipo-verld, "Country of dispatch for Foreign
"trade
herkl like eipo-herkl, "Country of origin of material
grwrt like eipo-grwrt, "Statistical value for Foreign
" trade
stawn like eipo-stawn, "Commodity code for foreign trade
expvz like eikp-expvz, "Mode of transport for foreign
"trade
end of t_data4.
*Type declaration for T618T.
types: begin of t_data5,
land1 like t618t-land1, "Country key
expvz like t618t-expvz, "Mode of Transport
bezei like t618t-bezei, "Description
end of t_data5.
*Type declaration for T604T.
types: begin of t_data6,
land1 like t604t-land1, "Country key
stawn like t604t-stawn, "Commodity Code
text1 like t604t-text1, "Description
end of t_data6.
*Type declaration for T604T.
types: begin of t_mara,
matnr like mara-matnr,
end of t_mara.
types : begin of rep_val,
vbelv like vbfa-vbelv,
posnv like vbfa-posnv,
vbeln like vbfa-vbeln,
posnn like vbfa-posnn,
uepos like vbap-uepos,
posnr like vbap-posnr,
netwr like vbap-netwr,
end of rep_val.
types : begin of t_price,
vbeln like vbak-vbeln,
posnr like vbap-posnr,
knumv like konv-knumv,
kposn like konv-kposn,
kbetr like konv-kbetr,
kpein like konv-kpein,
end of t_price.
data : t_sord type rep_val occurs 0 with header line.
data : t_dord type rep_val occurs 0 with header line.
data : t_rord type rep_val occurs 0 with header line.
data : t_hord type rep_val occurs 0 with header line.
data : t_ford type rep_val occurs 0 with header line.
data : i_price type t_price occurs 0 with header line.
data : i_price1 type t_price occurs 0 with header line.
data : i_mara type t_mara occurs 0 with header line.
data : i_sort type slis_t_sortinfo_alv.
DATA: t_layout TYPE slis_layout_alv.
*Declaring Selection screen.
selection-screen begin of block b1 with frame title text-101.
select-options:
s_verld for eipo-verld, "Country of Dest.
s_bukrs for bkpf-bukrs, "Company code
s_vkorg for likp-vkorg, "Sales Organisation
s_kunnr for likp-kunnr, "Ship-to-Party
s_kunag for likp-kunag, "Sold-to-party
s_wadat for likp-wadat_ist, "Goods Movement date
s_belnr for vbrk-vbeln, "Invoice number
s_blart for vbrk-fkart. "Invoice type.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-101.
select-options:
s_matnr for mara-matnr, "Material
s_mtart for mara-mtart. "Material Type
selection-screen end of block b2.
selection-screen begin of block b3 with frame title text-101.
parameters:
p_export(30) type c default '1366770724RM' obligatory , "Exporter ID
p_provi(30) type c default 'ONTARIO' obligatory ,
p_sumid(30) type c default 'SUM0704'.
"Province of Origin
selection-screen end of block b3.
selection-screen begin of block b4 with frame title text-104.
parameters:
r_summ radiobutton group zsum,
r_dets radiobutton group zsum,
r_mssng radiobutton group zsum, " maheedhar
R_NMSNG RADIOBUTTON GROUP ZSUM. " MAHEEDHAR
selection-screen skip.
parameter : p_sum as checkbox .
selection-screen end of block b4.
selection-screen begin of block b5 with frame title text-105.
select-options : s_i_kun for likp-kunnr.
selection-screen end of block b5.
*Data Declaration
data: i_fieldcat type slis_t_fieldcat_alv.
data: l_fieldcat type slis_fieldcat_alv .
data: v_lin type i.
data: v_lfstk type c value 'C'.
data: v_vbtyp type c value 'U'.
data: i_data1 type t_data1 occurs 0 with header line.
data : begin of t_T005t occurs 0.
include structure t005t.
data : end of t_t005t.
data: i_data2 type t_data2 occurs 0 with header line.
data: t_delv type t_data2 occurs 0 with header line.
data: t_bild type t_data2 occurs 0 with header line.
data: i_data3 type t_data3 occurs 0 with header line.
data: i_data4 type t_data4 occurs 0 with header line.
data: i_data5 type t_data5 occurs 0 with header line.
data: i_data6 type t_data6 occurs 0 with header line.
*Declare Internal table for ALV output.
data: begin of i_output occurs 0,
belnr like vbrk-vbeln,
posnr like vbrp-posnr,
bezei like t618t-bezei,
stawn like eipo-stawn,
text1 like t604t-text1,
quantity type p decimals 2,
meins like lips-meins,
value type p decimals 2,
verld like t_t005t-landx,
herkl like t_t005t-landx,
strlen, "ED1K938380
end of i_output.
maheedhar-start.
data : i_output1 like i_output occurs 0 with header line,
i_output2 like i_output occurs 0 with header line.
maheedhar-end
data : buff_out like i_output occurs 0 with header line.
data: begin of t_outsum occurs 0,
bezei like t618t-bezei,
stawn like eipo-stawn,
text1 like t604t-text1,
quantity type p decimals 2,
meins like lips-meins,
value type p decimals 2,
verld like t_t005t-landx,
herkl like t_t005t-landx,
end of t_outsum.
data : v_ans.
data : variante LIKE disvariant.
data : v_repid LIKE sy-repid.
data : wa_listheader TYPE slis_listheader.
data : t_listheader TYPE slis_t_listheader.
data : b_text(250).
data: evntS type slis_t_event with header line. " MAHEEDHAR
EVENT AT SELECTION-SCREEN
at selection-screen.
*For Autorisation check
perform authorisation_check.
Validation of Selection screen
perform check_entry.
EVENT START-OF-SELECTION
start-of-selection.
*Get data
perform select_data.
**For calling ALV function modules
MAHEEDHAR - START
if r_mssng eq 'X'.
DELETE I_OUTPUT WHERE BEZEI NE SPACE AND
STAWN NE SPACE AND
HERKL NE SPACE AND
VERLD NE SPACE.
DESCRIBE TABLE I_OUTPUT LINES V_LIN.
IF V_LIN > 0.
PERFORM DISPLAY_OUTPUT.
ELSE.
MESSAGE E000 WITH TEXT-130.
ENDIF.
elseif R_SUMM eq 'X' OR R_DETS EQ 'X'. "ENDIF. " MAHEEDHAR
MAHEEDHAR-END
describe table i_output lines v_lin.
if v_lin > 0.
buff_out[] = i_output[].
Begin of ED1K938380
delete buff_out where stawn ne space or "ED1K938380
verld eq space or
herkl eq space.
delete buff_out where strlen ne 'X' or
verld eq space or
herkl eq space.
End of ED1K938380
describe table buff_out lines v_lin.
Lines with no commodity code exists.
if v_lin gt 0.
concatenate text-902 text-903 into b_text.
concatenate text-906 text-907 into b_text. "ED1K938380
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = Text-901
TEXT_QUESTION = b_text
TEXT_BUTTON_1 = 'Yes'
TEXT_BUTTON_2 = 'No'
DEFAULT_BUTTON = '2'
IMPORTING
ANSWER = v_ans.
if v_ans eq '1'.
perform display_output.
endif.
else.
perform display_output.
endif.
else. " MAHEEDHAR
message e000 with text-130.
endif.
MAHEEDHAR-START
*"-- If non missing details radiobutton is selected
elseif r_nmsng = 'X'.
*"-- move data from i_output to i_output1.
i_output1[] = i_output[].
sort i_output by belnr.
sort i_output1 by belnr.
*"-- to get missing data
delete i_output1 where bezei ne space and
stawn ne space and
herkl ne space and
verld ne space.
loop at i_output.
*"-- compare two int tables with respective document number
read table i_output1 with key belnr = i_output-belnr.
if sy-subrc ne 0.
move-corresponding i_output to i_output2.
append i_output2.
clear i_output2.
endif.
endloop.
describe table i_output2 lines v_lin.
if v_lin gt 0.
perform display_output.
else.
message e000 with text-130.
endif.
MAHEEDHAR-END.
ENDIF. " MAHEEDHAR
FORM SELECT_DATA *
form select_data.
Data:l_strlen type i. "ED1K938380
*Get details from LIKP.
if s_i_kun[] is initial.
select likpvbeln likpkunnr
into corresponding fields of table i_data1
from likp
inner join vbuk on likpvbeln = vbukvbeln
where
likp~vkorg in s_vkorg and
likp~kunnr in s_kunnr and
likp~kunag in s_kunag and
likp~wadat_ist in s_wadat and
vbuk~wbstk = 'C' .
else.
select likpvbeln likpkunnr
into corresponding fields of table i_data1
from likp
inner join vbuk on likpvbeln = vbukvbeln
where
( ( likp~vkorg in s_vkorg and
likp~kunnr in s_kunnr and
likp~kunag in s_kunag and
likp~wadat_ist in s_wadat and
vbuk~wbstk = 'C' )
or
likp~kunnr in s_i_kun and
likp~wadat_ist in s_wadat and
vbuk~wbstk = 'C' ) .
endif.
if sy-subrc ne 0.
message e000 with text-200.
endif.
*Get details from table LIPS
select lips~vbeln
lips~posnr
vbfa~vbeln
vbfa~posnn
lips~matnr
lips~meins
lips~lfimg
mara~mtart
from lips
inner join vbfa on vbfavbelv = lipsvbeln
and vbfaposnv = lipsposnr
inner join mara on maramatnr = lipsmatnr
into table i_data2
for all entries in i_data1
where
lips~vbeln = i_data1-vbeln and
lips~matnr in s_matnr and
vbfa~vbeln in s_belnr and
mara~mtart in s_mtart and
vbfa~vbtyp_n = 'U'.
if sy-subrc ne 0.
message e000 with text-201.
endif.
t_delv[] = i_data2[].
t_bild[] = i_data2[].
sort t_delv by vbeln.
delete adjacent duplicates from t_delv comparing vbeln.
sort t_bild by vbeln ascending vbelv descending.
delete adjacent duplicates from t_bild comparing vbeln.
*Get details of Accounting document number
select vbeln fkart land1 from vbrk
into table i_data3
for all entries in t_bild
where vbeln = t_bild-vbelv and
bukrs in s_bukrs and
fkart in s_blart and
vkorg in s_vkorg and " MAHEEDHAR
land1 in s_verld. " MAHEEDHAR
sort i_data3.
*Get details from EIPO.
select vbrp~vbeln
vbrp~posnr
vbrp~matnr
vbrp~fkimg
vbrp~meins
eipo~verld
eipo~herkl
eipo~grwrt
eipo~stawn
eikp~expvz
from eikp
inner join vbrp on vbrp~vbeln = eikp~refnr
inner join eipo on eikp~exnum = eipo~exnum
and eipo~expos = vbrp~posnr
into table i_data4 for all entries in i_data3
where vbrp~vbeln = i_data3-vbeln.
eipo~verld in s_verld.
if sy-subrc ne 0.
message e000 with text-201.
endif.
IF R_MSSNG NE 'X' or r_nmsng = 'X'. " MAHEEDHAR
perform get_price.
ENDIF. " MAHEEDHAR
Get details from T618T.
select land1
expvz
bezei
from t618t
into table i_data5
for all entries in i_data4
where
land1 = 'CA' and " Getting for Canada only
expvz = i_data4-expvz and
spras = sy-langu.
select matnr from mara into table i_mara where matnr in s_matnr
and mtart in s_mtart.
Get details from T604T.
select land1
stawn
text1
from t604t
into table i_data6
for all entries in i_data4
where
land1 = i_data4-VERLD and
stawn = i_data4-stawn and
spras = sy-langu.
select * from T005t into table t_T005t where spras = sy-langu.
loop at i_data3.
loop at i_data4 where vbeln eq i_data3-vbeln.
clear : i_data1, i_data2.
read table i_data2 with key vbelv = i_data4-vbeln
posnv = i_data4-posnr.
read table i_data1 with key vbeln = i_data2-vbeln.
if not s_i_kun[] is initial.
check ( ( i_data1-kunnr in s_i_kun ) or
( i_data3-land1 in s_verld ) ).
else.
check i_data3-land1 in s_verld .
endif.
read table i_mara with key matnr = i_data4-matnr.
if sy-subrc eq 0.
read table i_data5 with key expvz = i_data4-expvz .
land1 = i_data3-land1.
read table i_data6 with key stawn = i_data4-stawn
land1 = i_data4-VERLD.
move i_data4-vbeln to i_output-belnr.
move i_data4-posnr to i_output-posnr.
move i_data5-bezei to i_output-bezei.
move i_data6-text1 to i_output-text1.
Begin of ED1K938380.
l_strlen = strlen( i_data4-stawn ).
if l_strlen < 8.
move 'X' to i_output-strlen.
endif.
End of ED1K938380.
move i_data4-stawn to i_output-stawn.
move i_data4-meins to i_output-meins.
read table t_T005t with key land1 = i_data3-land1.
move t_t005t-landx to i_output-verld.
if p_sum eq space.
if i_data4-herkl ne 'CA'.
i_output-herkl = c_for.
else.
read table t_T005t with key land1 = i_data4-herkl.
move t_t005t-landx to i_output-herkl.
endif.
else.
read table t_T005t with key land1 = i_data4-herkl.
move t_t005t-landx to i_output-herkl.
endif.
move i_data4-fkimg to i_output-quantity.
if i_data3-fkart eq c_rep.
read table t_dord with key vbeln = i_data4-vbeln
posnn = i_data4-posnr.
if sy-subrc eq 0.
read table t_sord with key vbeln = t_dord-vbelv
posnn = t_dord-posnv.
if sy-subrc eq 0.
read table t_hord with key vbeln = t_sord-vbelv
posnr = t_sord-posnv.
if sy-subrc eq 0.
read table t_ford with key vbeln = t_hord-vbeln
posnr = t_hord-uepos.
if sy-subrc eq 0.
read table i_price with key vbeln = t_ford-vbeln
posnr = t_ford-posnr.
if sy-subrc eq 0.
read table i_price1 with key knumv = i_price-knumv
kposn = t_ford-posnr.
if sy-subrc eq 0.
if i_price1-kpein ne 0.
i_output-value =
( i_price1-kbetr / i_price1-kpein ) *
i_data4-fkimg.
endif.
endif.
endif.
endif.
endif.
endif.
endif.
else.
move i_data4-grwrt to i_output-value.
endif.
append i_output.
clear i_output.
clear : i_data5, i_data6.
endif.
endloop.
endloop.
sort i_output by verld herkl bezei stawn.
endform.
FORM DISPLAY_OUTPUT *
This form is to create the ALV output
form display_output.
data: xevents type slis_t_event,
ls_event type slis_alv_event,
slis_ev_top_of_page type slis_formname value 'TOP_OF_PAGE',
slis_ev_end_of_list type slis_formname value 'END_OF_LIST'.
*Call Function 'REUSE_ALV_EVENTS' for top of page
call function 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = xevents
EXCEPTIONS
list_type_wrong = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
read table xevents with key name = slis_ev_top_of_page
into ls_event.
if sy-subrc = 0.
move slis_ev_top_of_page to ls_event-form.
append ls_event to xevents.
endif.
read table xevents with key name = slis_ev_end_of_list
into ls_event.
if sy-subrc = 0.
move slis_ev_end_of_list to ls_event-form.
append ls_event to xevents.
endif.
if r_dets ne space.
*Call Function 'REUSE_ALV_FIELD_CATALOG_MERGE' for position fixing in
*the output.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = 'ZVRA0001FTB13'
i_internal_tabname = 'I_OUTPUT'
i_inclname = 'ZVRA0001FTB13'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME =
i_bypassing_buffer = 'X'
i_buffer_active = ' '
changing
ct_fieldcat = i_fieldcat
exceptions
inconsistent_interface = 1
program_error = 2
others = 3.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at i_fieldcat into l_fieldcat.
l_fieldcat-key = ' '.
case l_fieldcat-fieldname.
when 'BELNR'.
l_fieldcat-seltext_m = text-912.
l_fieldcat-seltext_l = text-912.
l_fieldcat-reptext_ddic = text-912.
l_fieldcat-col_pos = '1'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '12'..
when 'POSNR'.
l_fieldcat-seltext_m = text-913.
l_fieldcat-seltext_l = text-913.
l_fieldcat-reptext_ddic = text-913.
l_fieldcat-col_pos = '2'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '6'.
when 'BEZEI'.
l_fieldcat-seltext_m = text-911.
l_fieldcat-seltext_l = text-911.
l_fieldcat-reptext_ddic = text-911.
l_fieldcat-col_pos = '3'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '15'..
when 'STAWN'.
l_fieldcat-seltext_m = text-111.
l_fieldcat-seltext_l = text-111.
l_fieldcat-reptext_ddic = text-111.
l_fieldcat-col_pos = '4'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '30'.
when 'TEXT1'.
l_fieldcat-seltext_m = text-112.
l_fieldcat-seltext_l = text-112.
l_fieldcat-outputlen = '40'.
l_fieldcat-col_pos = '5'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-112.
when 'QUANTITY'.
l_fieldcat-outputlen = '18'.
l_fieldcat-reptext_ddic = text-113.
l_fieldcat-seltext_m = text-113.
l_fieldcat-col_pos = '6'.
l_fieldcat-just = 'C'.
l_fieldcat-seltext_l = text-113.
when 'MEINS'.
l_fieldcat-outputlen = '8'.
l_fieldcat-reptext_ddic = text-114.
l_fieldcat-seltext_m = text-114.
l_fieldcat-col_pos = '7'.
l_fieldcat-just = 'C'.
l_fieldcat-seltext_l = text-114.
when 'VALUE'.
l_fieldcat-outputlen = '20'.
l_fieldcat-seltext_m = text-115.
l_fieldcat-seltext_l = text-115.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-115.
when 'VERLD'.
l_fieldcat-outputlen = '20'.
l_fieldcat-seltext_m = text-116.
l_fieldcat-seltext_l = text-116.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-116.
when 'HERKL'.
l_fieldcat-seltext_m = text-117.
l_fieldcat-seltext_l = text-117.
l_fieldcat-outputlen = '30'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-117.
when others.
l_fieldcat-no_out = 'X'.
endcase.
modify i_fieldcat from l_fieldcat.
endloop.
Call Function 'REUSE_ALV_LIST_DISPLAY' for dispaly of data in ALV.
call function 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZVRA0001FTB13'
it_fieldcat = i_fieldcat
it_events = xevents
is_layout = t_layout
i_save = 'A'
i_bypassing_buffer = 'X'
i_buffer_active = ' '
TABLES
t_outtab = i_output
EXCEPTIONS
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
else. " MAHEEDHAR
ELSEIF R_SUMM EQ 'X'. " MAHEEDHAR
sort i_output by verld herkl stawn bezei.
loop at i_output.
move-corresponding i_output to t_outsum.
collect t_outsum.
endloop.
*Call Function 'REUSE_ALV_FIELD_CATALOG_MERGE' for position fixing in
*the output.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZVRA0001FTB13'
i_internal_tabname = 'T_OUTSUM'
i_inclname = 'ZVRA0001FTB13'
i_bypassing_buffer = 'X'
i_buffer_active = ' '
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
others = 3.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at i_fieldcat into l_fieldcat.
l_fieldcat-key = ' '.
case l_fieldcat-fieldname.
when 'BEZEI'.
l_fieldcat-seltext_m = text-911.
l_fieldcat-seltext_l = text-911.
l_fieldcat-reptext_ddic = text-911.
l_fieldcat-col_pos = '1'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '15'..
when 'STAWN'.
l_fieldcat-seltext_m = text-111.
l_fieldcat-seltext_l = text-111.
l_fieldcat-reptext_ddic = text-111.
l_fieldcat-col_pos = '2'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '30'.
when 'TEXT1'.
l_fieldcat-seltext_m = text-112.
l_fieldcat-seltext_l = text-112.
l_fieldcat-outputlen = '40'.
l_fieldcat-col_pos = '3'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-112.
when 'QUANTITY'.
l_fieldcat-outputlen = '18'.
l_fieldcat-reptext_ddic = text-113.
l_fieldcat-seltext_m = text-113.
l_fieldcat-col_pos = '4'.
l_fieldcat-just = 'C'.
l_fieldcat-seltext_l = text-113.
when 'MEINS'.
l_fieldcat-outputlen = '8'.
l_fieldcat-reptext_ddic = text-114.
l_fieldcat-seltext_m = text-114.
l_fieldcat-col_pos = '5'.
l_fieldcat-just = 'C'.
l_fieldcat-seltext_l = text-114.
when 'VALUE'.
l_fieldcat-outputlen = '20'.
l_fieldcat-seltext_m = text-115.
l_fieldcat-seltext_l = text-115.
l_fieldcat-col_pos = '6'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-115.
when 'VERLD'.
l_fieldcat-outputlen = '20'.
l_fieldcat-seltext_m = text-116.
l_fieldcat-seltext_l = text-116.
l_fieldcat-col_pos = '7'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-116.
when 'HERKL'.
l_fieldcat-seltext_m = text-117.
l_fieldcat-seltext_l = text-117.
l_fieldcat-outputlen = '30'.
l_fieldcat-col_pos = '8'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-117.
when others.
l_fieldcat-no_out = 'X'.
endcase.
modify i_fieldcat from l_fieldcat.
endloop.
Call Function 'REUSE_ALV_LIST_DISPLAY' for dispaly of data in ALV.
call function 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZVRA0001FTB13'
it_fieldcat = i_fieldcat
it_events = xevents
i_save = 'A'
is_layout = t_layout
i_default = 'X'
is_variant = variante
i_bypassing_buffer = 'X'
i_buffer_active = ' '
TABLES
t_outtab = t_outsum
EXCEPTIONS
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
MAHEEDHAR-START.
*"-- if detail summary checkbox is selected
elseIF R_MSSNG = 'X'.
PERFORM PREPARE_HEADER.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = 'ZVRA0001FTB13'
i_internal_tabname = 'I_OUTPUT'
i_inclname = 'ZVRA0001FTB13'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME =
i_bypassing_buffer = 'X'
i_buffer_active = ' '
changing
ct_fieldcat = i_fieldcat
exceptions
inconsistent_interface = 1
program_error = 2
hi,
*& Report ZALV_FIELD_GRID1
REPORT ZALV_FIELD_GRID1
NO STANDARD PAGE HEADING.
TABLES MARA.
type-pools :slis.
TYPES : BEGIN OF TMARA ,
MATNR LIKE MARA-MATNR,
MEINS LIKE MARA-MEINS,
ERSDA LIKE MARA-ERSDA,
color(4) type c,
SEL type c,
LIGHT TYPE C,
END OF TMARA.
TYPES: BEGIN OF TMAKT,
MATNR LIKE MAKT-MATNR,
MAKTX LIKE MAKT-MAKTX,
MAKTG LIKE MAKT-MAKTG,
SEL TYPE C,
COLOR(4),
END OF TMAKT.
DATA: ITAB TYPE TMARA OCCURS 0 WITH HEADER LINE,
ITAB1 TYPE TMAKT OCCURS 0 WITH HEADER LINE,
wa_fieldcat type slis_fieldcat_alv,
fieldcat type slis_fieldcat_alv occurs 0,
i_layout type slis_layout_alv,
WA_LISTHEADER TYPE SLIS_LISTHEADER ,
i_LISTHEADER TYPE SLIS_LISTHEADER OCCURS 0,
V_EVENTS TYPE SLIS_T_EVENT ,
WA_EVENT TYPE SLIS_ALV_EVENT,
I_TITLE_MARA TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED',
I_TITLE_MAKT TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED',
SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE,
PRINT_CONT type slis_print_alv.
SELECTION SCREE
selection-screen begin of block screen1 with frame title TEXT-001.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN COMMENT /32(35) COMM1.
SELECTION-SCREEN ULINE /27(35).
SELECTION-SCREEN SKIP.
SELECT-OPTIONS MATNR FOR MARA-MATNR.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN COMMENT /30(50) COMM2.
SELECTION-SCREEN ULINE /27(40).
SELECTION-SCREEN SKIP.
SELECT-OPTIONS ERSDA FOR MARA-ERSDA.
SELECTION-SCREEN SKIP.
selection-screen end of block screen1.
INITIALIZATION
INITIALIZATION.
MATNR-low = '23'.
MATNR-high = '1000'.
MATNR-option = 'BT'.
MATNR-sign = 'I'.
APPEND MATNR.
ERSDA-low = '20030124'.
ERSDA-high = '20050302' .
APPEND ERSDA.
PERFORM FILLFIELD.
PERFORM FILLLAYOUT.
PERFORM build_print_params.
PERFORM FILL_SORT.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
comm1 ='SELECT MATERIAL NUMBER RANGE'.
comm2 ='SELECT MATERIAL CREATION DATE'.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM READDATA.
PERFORM POPDATA.
*& Form READDATA
text
FORM READDATA .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = MATNR-LOW
IMPORTING
OUTPUT = MATNR-LOW.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = MATNR-HIGH
IMPORTING
OUTPUT = MATNR-HIGH.
SELECT MATNR
ERSDA
MEINS
FROM MARA
INTO CORRESPONDING FIELDS OF
TABLE ITAB
WHERE MATNR IN MATNR AND ERSDA IN ERSDA.
LOOP AT ITAB.
data id_color type i VALUE 1.
data id_colors(2) type c.
IF ITAB-MATNR < '000000000000000100'.
ITAB-LIGHT = '1'.
ELSEIF ITAB-MATNR < '000000000000000150' AND ITAB-MATNR >
'000000000000000100' .
ITAB-LIGHT = '2'.
ELSE.
ITAB-LIGHT = '3'.
ENDIF.
id_color = id_color + 1.
if id_color > 7.
id_color = 1.
endif.
id_colors = id_color.
concatenate 'C' id_colors '10' into itab-color.
modify itab.
CLEAR ITAB.
endloop.
ENDFORM. " READDATA
Form FILLFIELD
FORM FILLFIELD .
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-KEY = 'X'.
WA_FIELDCAT-COL_POS = '1'.
WA_FIELDCAT-outputlen = 20.
WA_FIELDCAT-HOTSPOT = 'X'.
wa_fieldcat-seltext_m = 'MATERIAL NUMBER'.
*WA_FIELDCAT-EMPHASIZE = 'C210'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-COL_POS = '2'.
*WA_FIELDCAT-EMPHASIZE = 'C510'.
WA_FIELDCAT-outputlen = 10.
wa_fieldcat-seltext_m = 'UNIT'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'ERSDA'.
WA_FIELDCAT-COL_POS = '3'.
WA_FIELDCAT-outputlen = 15.
*WA_FIELDCAT-EDIT_MASK = 'DD.MM.YYYY'.
*WA_FIELDCAT-EMPHASIZE = 'C710'.
wa_fieldcat-seltext_m = 'CREAT DATE'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
ENDFORM. "FILLFIELD
Setup print parameters
form build_print_params.
PRINT_CONT-reserve_lines = '3'. "Lines reserved for footer
PRINT_CONT-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
Form POPDATA
FORM POPDATA .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER-COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOPPAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_MARA
I_GRID_SETTINGS =
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = SORT[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = V_EVENTS
IT_EVENT_EXIT =
IS_PRINT = PRINT_CONT
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
ENDFORM. " POPDATA
Form TOPPAGE
FORM TOPPAGE.
REFRESH I_LISTHEADER.
DATA: ld_lines type i,
ld_linesc(10) type c,
I_DATE(10) TYPE C,
I_INFO LIKE WA_LISTHEADER-INFO.
WA_LISTHEADER-TYP = 'H'.
WA_LISTHEADER-INFO = 'MATERIAL DETAIL'.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
WA_LISTHEADER-TYP = 'S'.
WA_LISTHEADER-KEY = 'DATE :'.
CONCATENATE SY-DATUM+6(2) '.'
SY-DATUM+4(2) '.'
SY-DATUM(4) INTO I_DATE.
WA_LISTHEADER-INFO = I_datE.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
describe table ITAB lines ld_lines.
ld_linesc = ld_lines.
concatenate 'TOTAL NUMBER OF RECORD SELECTED: ' ld_linesc
into I_INFO separated by space.
WA_LISTHEADER-TYP = 'A'.
WA_LISTHEADER-INFO = I_INFO.
append WA_LISTHEADER to I_LISTHEADER.
clear: WA_LISTHEADER , I_INFO.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = I_LISTHEADER
I_LOGO = 'ENJOYSAP_LOGO'.
ENDFORM. "TOPPAGE
Form FILLLAYOUT
FORM FILLLAYOUT .
i_layout-zebra = 'X'.
i_layout-info_fieldname = 'COLOR'.
i_layout-box_fieldname = 'SEL'.
I_LAYOUT-lights_fieldname = 'LIGHT'.
I_LAYOUT-EDIT ='X'.
I_LAYOUT-colwidth_optimize = 'X'.
I_LAYOUT-window_titlebar = 'EXAMPLE FOR ALV GRID'.
I_LAYOUT-no_totalline = 'X'.
ENDFORM. "FILLLAYOUT
Form FILL_SORT
FORM FILL_SORT .
SORT-DOWN = 'X'.
SORT-SPOS = 1.
SORT-FIELDNAME = 'MATNR'.
SORT-tabname = 'MARA'.
APPEND SORT.
ENDFORM. " FILL_SORT
Form EVENT_CALL
FORM EVENT_CALL .
DATA: I_EVENT LIKE V_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " EVENT_CALL
Form POPULATE_EVENT
FORM POPULATE_EVENT .
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
READ TABLE V_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO WA_EVENT.
IF SY-SUBRC = 0.
move 'END_OF_PAGE' to WA_EVENT-FORM.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
endif.
ENDIF.
ENDFORM. "POPULATE_EVENT
FORM END_OF_PAGE.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
ENDFORM.
*& Form USER_COMMAND
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
CASE RS_SELFIELD-FIELDNAME.
when 'MATNR'.
read table itab with key matnr = RS_SELFIELD-VALUE.
if sy-subrc = 0.
PERFORM DATA_RETRIEVAL_MAKT USING RS_SELFIELD-VALUE.
PERFORM BUILD_FIELDCATLOG_MAKT.
PERFORM FILLLAYOUT_MAKT.
PERFORM DISPLAY_ALV_MAKT.
CLEAR RS_SELFIELD.
ENDIF.
ENDCASE.
ENDCASE.
ENDFORM. "user_command
Form DATA_RETRIEVAL_MAKT
FORM DATA_RETRIEVAL_MAKT USING TMATNR .
SELECT MATNR
MAKTX
MAKTG
UP TO 100 ROWS
FROM MAKT
INTO TABLE ITAB1
WHERE SPRAS = 'EN' AND MATNR = TMATNR.
LOOP AT ITAB1.
data id_color type i VALUE 1.
data id_colors(2) type c.
id_color = id_color + 1.
if id_color > 7.
id_color = 1.
endif.
id_colors = id_color.
concatenate 'C' id_colors '10' into itab1-color.
modify itab1.
CLEAR ITAB1.
ENDLOOP.
ENDFORM. "DATA_RETRIEVAL_MAKT
Form FILLLAYOUT_MAKT
FORM FILLLAYOUT_MAKT .
CLEAR I_LAYOUT.
i_layout-zebra = 'X'.
i_layout-info_fieldname = 'COLOR'.
i_layout-box_fieldname = 'SEL'.
I_LAYOUT-EDIT ='X'.
I_LAYOUT-colwidth_optimize = 'X'.
I_LAYOUT-window_titlebar = 'EXAMPLE FOR ALV GRID'.
ENDFORM. " LAYOUT_MAKT
Form BUILD_FIELDCATLOG_MAKT
FORM BUILD_FIELDCATLOG_MAKT .
REFRESH FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-KEY = 'X'.
WA_FIELDCAT-COL_POS = '1'.
*WA_FIELDCAT-EDIT_MASK = 'DD.MM.YYYY'.
WA_FIELDCAT-EMPHASIZE = 'C510'.
wa_fieldcat-seltext_m = 'MATERIAL NUMBER'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'MAKTX'.
WA_FIELDCAT-COL_POS = '2'.
WA_FIELDCAT-EMPHASIZE = 'C710'.
wa_fieldcat-seltext_m = 'MATERIAL DESCRIPTION'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'MAKTG'.
WA_FIELDCAT-COL_POS = '3'.
WA_FIELDCAT-EMPHASIZE = 'C210'.
wa_fieldcat-seltext_m = 'MATERIAL DESCRIPTION'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
ENDFORM. " BUILD_FIELDCATLOG_MAKT
Form DISPLAY_ALV_MAKT
FORM TOP-OF-PAGE.
REFRESH I_LISTHEADER.
DATA: ld_lines type i,
ld_linesc(10) type c,
I_DATE(10) TYPE C,
I_INFO LIKE WA_LISTHEADER-INFO.
WA_LISTHEADER-TYP = 'H'.
WA_LISTHEADER-INFO = 'MATERIAL DESCRIPTION FOR SELECTED NUMBER'.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
WA_LISTHEADER-TYP = 'S'.
WA_LISTHEADER-KEY = 'DATE :'.
CONCATENATE SY-DATUM+6(2) '.'
SY-DATUM+4(2) '.'
SY-DATUM(4) INTO I_DATE.
WA_LISTHEADER-INFO = I_datE.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
describe table ITAB1 lines ld_lines.
ld_linesc = ld_lines.
concatenate 'TOTAL NUMBER OF RECORD SELECTED: ' ld_linesc
into I_INFO separated by space.
WA_LISTHEADER-TYP = 'A'.
WA_LISTHEADER-INFO = I_INFO.
append WA_LISTHEADER to I_LISTHEADER.
clear: WA_LISTHEADER , I_INFO.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = I_LISTHEADER
I_LOGO = 'ENJOYSAP_LOGO'.
I_END_OF_LIST_GRID =
I_ALV_FORM =
ENDFORM. "TOP-OF-PAGE
*& Form DISPLAY_ALV_MAKT
text
FORM DISPLAY_ALV_MAKT .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
I_GRID_TITLE = I_TITLE_MAKT
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = fieldcat
TABLES
T_OUTTAB = ITAB1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_MAKT
Regards
Ashok kumar -
Hide delete option is not working in ALV List Display- urgent
Hi All,
In my program i am displaying the output by using alv list display. after displaying the data i am displaying my own pf status here. in this i have few pushbuttons like
selest all, deselect all, hide . first two options are working fine. when i click hide button selected records are going to be hide.but this is not happening in my program. any body cam send me the code plz.
i am sending my code below. if possible please modify and resend the code asap.
my code:
type-pools : slis.
tables : zuser_secobjects.
data : t_header1 like zuser_secobjects.
data : begin of it_secobjects occurs 0.
include structure t_header1.
*data : box,
input(1) type c,
data : checkbox type c,
flag type c,
end of it_secobjects.
data : wa_ita like line of it_secobjects.
*data : it_secobjects like zuser_secobjects occurs 0 with header line.
data : i_field type slis_t_fieldcat_alv with header line.
data : w_field like line of i_field.
data : i_sort type slis_t_sortinfo_alv.
data : w_sort like line of i_sort.
data : it_filt1 type slis_t_filter_alv with header line.
data:
i_tabname type tabname,
i_repid like sy-repid,
is_lout type slis_layout_alv.
data : it_filt type slis_t_filter_alv with header line,
it_evts type slis_t_event with header line.
DATA : is_vari type disvariant.
constants : c_default_vari value 'X',
c_save_vari value 'U',
c_checkfield type slis_fieldname value 'ACTION',
c_f2code type sy-ucomm value '&ETA'.
data : chk_box type slis_fieldname.
selection-screen: begin of block b1 with frame title text-t01.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
p_partnr type zuser_secobjects-appln_partner,
p_ptype type zuser_secobjects-partner_type default '02',
p_upostn type zuser_secobjects-user_position,
p_sdate like likp-erdat default sy-datum,
p_edate(10) default '12/31/9999',
p_revnum type zuser_secobjects-revnum,
p_cted type zuser_secobjects-created_by,
p_cdate type zuser_secobjects-creation_date,
p_ctime type zuser_secobjects-creation_time,
p_chnby type zuser_secobjects-changed_by,
p_cdate1 type zuser_secobjects-changed_date,
p_ctime1 type zuser_secobjects-changed_time.
selection-screen: end of block b1.
form user_command using p_ucomm like sy-ucomm
rs_selfield type slis_selfield.
*DATA : it_filt type slis_t_filter_alv with header line.
case p_ucomm.
when 'SELECT_ALL'. " SELALL is the FCODE of ur push button
loop at it_secobjects into wa_ita.
wa_ita-checkbox = 'X'.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
when 'DESLCT_ALL'.
loop at it_secobjects into wa_ita.
wa_ita-checkbox = ' '.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
is_lout-f2code = c_f2code.
is_lout-box_fieldname = c_checkfield.
is_lout-get_selinfos = 'X'.
is_lout-detail_popup = 'X'.
is_lout-detail_initial_lines = 'X'.
when 'HIDE_DEL'.
rs_selfield-exit = 'X'.
it_filt-fieldname = 'CHECKBOX'.
it_filt-tabname = '1'.
it_filt-valuf = 'X'.
it_filt-intlen = '1'.
it_filt-inttype = 'C'.
it_filt-datatype = 'CHAR'.
it_filt-valuf_int = 'X'.
it_filt-sign0 = 'E'.
it_filt-optio = 'EQ'.
if it_filt[] is initial.
append it_filt.
else.
modify it_filt index 1.
endif.
perform display using i_object.
PERForm ALV_LIST_DISPLAY.
WHEN 'SHOW_DEL'.
rs_selfield-exit = 'X'.
free it_filt.
PERForm ALV_LIST_DISPLAY.
when 'SAVE1'.
select * from zuser_secobjects where
appln = zuser_secobjects-appln
and appln_partner = zuser_secobjects-appln_partner
and partner_type = zuser_secobjects-partner_type
and start_date = zuser_secobjects-start_date
and end_date = zuser_secobjects-end_date.
endselect.
if sy-subrc eq 0.
message e000(ZV) with 'Duplicate Entry'.
endif.
endcase.
endform.
*& Form delete
form delete.
data : begin of is_secobjects occurs 0.
include structure zuser_secobjects.
data : checkbox type c.
data : end of is_secobjects.
is_secobjects-checkbox = 'X'.
modify is_secobjects
from it_secobjects
transporting checkbox
where checkbox = 'X'.
endform.
*& Form get_data
form get_data.
select * from zuser_secobjects
into table it_secobjects.
endform. " get_data
*& Form prepare_fieldcatalog
text
--> p1 text
<-- p2 text
form prepare_fieldcatalog.
clear: w_field,i_field.
refresh:i_field.
i_field-key = 'X'.
i_field-col_pos = 1.
i_field-ddictxt = 'S'.
i_field-seltext_s = '@11@'.
i_field-checkbox = 'X'.
i_field-input = 'X'.
i_field-fieldname = 'HEADER'.
i_field-outputlen = 0.
append i_field.
clear i_field.
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_USER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
endform. " prepare_fieldcatalog
*& Form ALV_LIST_DISPLAY
text
--> p1 text
<-- p2 text
form alv_list_display.
i_repid = sy-repid.
is_lout-box_fieldname = 'CHECKBOX'.
it_filt-fieldname = 'CHECKBOX'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = i_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
is_layout = is_lout
it_fieldcat = i_field[]
it_filter = it_filt[]
it_events = it_evts[]
i_default = c_default_vari
i_save = c_save_vari
is_variant = is_vari
tables
t_outtab = it_secobjects.
endform. " ALV_LIST_DISPLAY
*& Form display
text
-->P_I_OBJECT text
form display using object.
case object.
ENDCASE.
endform. " display
thanks,
maheedhar.tHi,
What do you mean by Hiding the records.
Deleting completely from the screen.
You can just delete the records from the internal table and pass to field catalog before displaying again.
or serach in the slis structrue for hiding the contents of the output.
reward if useful
regards,
Anji -
How to edit particular field in alv list display-urgent
HI ALL,
my requirement is i am displaying output using alv list display. now my rewuirement :
i am displaying out in edit mode only. when user clicks one particular field
for example record is like
runrate a01 maheed -> if user clicks on a01 this field should be editable. i have a following code
w_field-edit = w_edit.
w_field-input = 'X'. -> using this code i can able to display entire colomn in edit mode. this not suits my requirement.anybody can send me the sample code please.
thanks,
maheedhar.tCan you please send me the sample code plz.
i am sending my code below.
type-pools : slis.
tables : zuser_secobjects.
data : t_header1 like zuser_secobjects.
data : begin of it_secobjects occurs 0.
include structure t_header1.
data : checkbox type c value 'X',
action type c,
end of it_secobjects.
data : begin of it_secobjects1 occurs 0.
include structure ZUSER_SECOBJECTS.
data : checkbox type c VALUE 'X',
end of it_secobjects1.
data : wa_ita like line of it_secobjects.
data : i_field type slis_t_fieldcat_alv with header line.
data : w_field like line of i_field.
data : i_sort type slis_t_sortinfo_alv.
data : w_sort like line of i_sort.
data : it_filt1 type slis_t_filter_alv with header line.
data:
i_tabname type tabname,
i_repid like sy-repid,
is_lout type slis_layout_alv.
data : it_filt type slis_t_filter_alv with header line,
it_evts type slis_t_event with header line.
DATA : is_vari type disvariant.
constants : c_default_vari value 'X',
c_save_vari value 'U',
c_checkfield type slis_fieldname value 'ACTION',
c_f2code type sy-ucomm value '&ETA'.
data : chk_box type slis_fieldname.
selection-screen: begin of block b1 with frame title text-t01.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
p_partnr type zuser_secobjects-appln_partner,
p_ptype type zuser_secobjects-partner_type default '02',
p_upostn type zuser_secobjects-user_position,
p_sdate like likp-erdat default sy-datum,
p_edate(10) default '12/31/9999',
p_revnum type zuser_secobjects-revnum,
p_cted type zuser_secobjects-created_by,
p_cdate type zuser_secobjects-creation_date,
p_ctime type zuser_secobjects-creation_time,
p_chnby type zuser_secobjects-changed_by,
p_cdate1 type zuser_secobjects-changed_date,
p_ctime1 type zuser_secobjects-changed_time.
selection-screen: end of block b1.
form user_command using p_ucomm like sy-ucomm
rs_selfield type slis_selfield.
case p_ucomm.
when 'SELECT_ALL'. " SELALL is the FCODE of ur push button
loop at it_secobjects into wa_ita.
wa_ita-checkbox = 'X'.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
when 'DESLCT_ALL'.
loop at it_secobjects into wa_ita.
wa_ita-checkbox = ' '.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
is_lout-f2code = c_f2code.
is_lout-box_fieldname = c_checkfield.
is_lout-get_selinfos = 'X'.
is_lout-detail_popup = 'X'.
is_lout-detail_initial_lines = 'X'.
maheed-start.
*when 'SAVE'.
*LOOP AT IT_SECOBJECTS WHERE CHECKBOX = 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
CLEAR IT_SECOBJECTS1.
DELETE IT_SECOBJECTS.
*ENDLOOP.
*DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
WHEN 'DELETE'.
loop at it_SECOBJECTS where checkbox eq 'X'.
delete it_SECOBJECTS.
endloop.
*RS_SELFIELD-REFRESH = 'X'.
maheed-end.
maheed-start. apr 13
WHEN 'DELETE'.
loop at it_SECOBJECTS where checkbox eq 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
delete it_SECOBJECTS.
endloop.
RS_SELFIELD-REFRESH = 'X'.
when 'SAVE'.
DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
commit work.
refresh :IT_SECOBJECTS1.
maheed-end. apr 13
*when 'SAVE'.
*LOOP AT IT_SECOBJECTS WHERE CHECKBOX = 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
CLEAR IT_SECOBJECTS1.
DELETE IT_SECOBJECTS.
*ENDLOOP.
*DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
ENDCASE.
endform.
*& Form delete
form delete.
data : begin of is_secobjects occurs 0.
include structure zuser_secobjects.
data : checkbox type c.
data : end of is_secobjects.
is_secobjects-checkbox = 'X'.
modify is_secobjects
from it_secobjects
transporting checkbox
where checkbox = 'X'.
endform.
*& Form get_data
form get_data.
select * from zuser_secobjects
into table it_secobjects.
endform. " get_data
*& Form prepare_fieldcatalog
text
--> p1 text
<-- p2 text
form prepare_fieldcatalog." USING w_edit TYPE any.
data : w_edit type c.
clear w_edit.
clear: w_field,i_field.
refresh:i_field.
i_field-key = 'X'.
i_field-col_pos = 1.
i_field-ddictxt = 'S'.
i_field-seltext_s = '@11@'.
i_field-checkbox = 'X'.
i_field-input = 'X'.
i_field-fieldname = 'HEADER'.
i_field-outputlen = 0.
append i_field.
clear i_field.
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-EDIT = 'X'. "maheed
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_USER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_PARTNER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m03.
w_field-edit = w_edit.
w_field-input = 'X'.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'INACTIVE'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 3.
append w_field to i_field.
clear w_field.
endform. " prepare_fieldcatalog
*& Form ALV_LIST_DISPLAY
text
--> p1 text
<-- p2 text
form alv_list_display.
DATA : LC_GLAY TYPE LVC_S_GLAY.
LC_GLAY-EDT_CLL_CB = 'X'.
i_repid = sy-repid.
is_lout-box_fieldname = 'CHECKBOX'.
it_filt-fieldname = 'ACTION'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = i_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
is_layout = is_lout
it_fieldcat = i_field[]
it_filter = it_filt[]
it_events = it_evts[]
i_default = c_default_vari
i_save = c_save_vari
is_variant = is_vari
tables
t_outtab = it_secobjects.
endform. " ALV_LIST_DISPLAY
*& Form display
text
-->P_I_OBJECT text
form display using object.
case object.
ENDCASE.
endform. " display
thanks,
maheedhar.t -
Transaction for active article list -sitewise-urgent
Transaction for active article list -sitewise plz
Hello,
You can get site-wise list of articles using transaction MM60. But this shows all the articles - active and blocked.
In order to filter blocked articles, you may create an SQVI query between MARA and MARC tables. In the query, include MARA-MSTAE and MARC-MMSTA in the selection screen. They should be set to blank while executing the query to get active articles.
Thanks,
Venu -
Purchase order sample - drop down list populating another drop down list
hello, when i use this sample script, it works fine. but when i add additional arrays to it, it doesn't work at all. please let me know what i need to change in this script in order to add additional items into the drop down lists. here is the script that works (displays 3 options in first drop down list (blank, option, another option)):
// This script object controls the interaction between the carrier and plan Drop-down lists.
// The array contains the carriers and the corresponding plans.
var myCarriers = new Array(new Array(2), new Array(14), new Array(17)); // Create a two-dimensional array.
// For each carrier, add a 'new Array(number of plan +1)'.
// Define the carrier and the corresponding plans.
// The array syntax is arrayName[index][index].
// The first index number represents the carrier,
// the second index number is the actual data value.
myCarriers[0][0] = " "; // The first items in the Drop-dowm Lists should be blank.
myCarriers[0][1] = " ";
myCarriers[1][0] = "ANERT"; // The first data value is the carrier name,
myCarriers[1][1] = "MC250"; // the rest are plans.
myCarriers[1][2] = "MC2501";
myCarriers[1][3] = "MC5002";
myCarriers[1][4] = "MC5003";
myCarriers[1][5] = "MC1000";
myCarriers[1][6] = "MC2000";
myCarriers[1][7] = "MCHC2300";
myCarriers[1][8] = "MCHC3000";
myCarriers[1][9] = "MC2500";
myCarriers[1][10] = "MB";
myCarriers[1][11] = "P500";
myCarriers[1][12] = "MHH3000";
myCarriers[1][13] = "MHH5000";
myCarriers[2][0] = "BCCA"; // This is a new carrier, see how the first number is now [1].
myCarriers[2][1] = "S Plan";
myCarriers[2][2] = "BPlan";
myCarriers[2][3] = "P40";
myCarriers[2][4] = "P30";
myCarriers[2][5] = "P35*";
myCarriers[2][6] = "P45*";
myCarriers[2][7] = "Ad25*";
myCarriers[2][8] = "Pr20";
myCarriers[2][9] = "Pr10";
myCarriers[2][10] = "PH750*";
myCarriers[2][11] = "PH500*";
myCarriers[2][12] = "2400HD";
myCarriers[2][13] = "3500HD";
myCarriers[2][14] = "2000HD";
myCarriers[2][15] = "LH1500";
myCarriers[2][16] = "LH3000";
// This function will populate the carrier Drop-down List.
// This function is called from the initialize event of the carrier Drop-down List.
function getCarriers(dropdownField)
dropdownField.clearItems();
for (var i=0; i < myCarriers.length; i++)
dropdownField.addItem(myCarriers[i][0]);
// This function will populate the plans Drop-down List for any event EXCEPT the change event.
// This function is called by the initialize event of the plan Drop-down List.
function getPlans(carrierField, dropdownField)
dropdownField.clearItems(); // Clear the items of the Drop-down List.
for (var i=0; i < myCarriers.length; i++) // Look through all the carriers until we find the one that matches the carrier selected.
if(myCarriers[i][0] == carrierField.rawValue) // Check to see if they match.
for (var j=1; j < myCarriers[i].length; j++) // When they match, add the plans to the Drop-down List.
dropdownField.addItem(myCarriers[i][j]);
dropdownField.rawValue = myCarriers[i][1]; // Display the first item in the list.
// This function will populate the plans Drop-down List for the change event.
// This function is called by the change event of the carrier Drop-down List.
// The first parameter is simply a pointer to the xfa object model.
function getPlansOther(myXfa, dropdownField)
dropdownField.clearItems(); // Clear the items of the Drop-down list.
for (var i=0; i < myCarriers.length; i++) // Look through all the carriers until we find the one that matches the carrier selected.
if(myCarriers[i][0] == myXfa.event.newText) // Check to see if they match. Note: we have to use the event.newText in this case because
{ // the chcontinued...
change hasn't been committed yet.
for (var j=1; j < myCarriers[i].length; j++) // When they match, add the states/provinces to the Drop-down List.
dropdownField.addItem(myCarriers[i][j]);
dropdownField.rawValue = myCarriers[i][1]; // Display the first item in the list.
when i try to add 4 more arrays (add items to first drop down list and second drop down list), nothing displays in either drop down lists. please let me know the items that need to be changed - besides these items (i know i need to add arrays and add myCarriers[1][0],[2][0],[3][0] to [6][0] --- for 4 additional items in the first drop down):
var myCarriers = new Array(new Array(2), new Array(14), new Array(17)); // Create a two-dimensional array.
// For each carrier, add a 'new Array(number of plan +1)'.
// Define the carrier and the corresponding plans.
// The array syntax is arrayName[index][index].
// The first index number represents the carrier,
// the second index number is the actual data value.
myCarriers[0][0] = " "; // The first items in the Drop-dowm Lists should be blank.
myCarriers[0][1] = " ";
myCarriers[1][0] = "ANERT"; // The first data value is the carrier name,
myCarriers[1][1] = "MC250"; // the rest are plans.
myCarriers[1][2] = "MC2501";
myCarriers[1][3] = "MC5002";
any help would be greatly appreciated. thank you!
Maybe you are looking for
-
I have just bought an ipad mini with ret.display, I wish to link up my MacBook Pro to icloud with my ipad, but my MacBook doesnt have an icloud icon in system preferences. How do I upgrade my MacBook to accept iCloud link.
-
How can I install Windows 7 on Macbook Pro 17' (2009 model)?
I cannot Install, neither enter on the setup screen. When I go to Bootcamp (3.0.1) and do everything then at the end when it says to done & restart my Macbook Pro 17' Inch (2009 model (MacbookPro 5,2)). I get into a white screen (bootscreen) then it
-
Where would i get Batch Size in SAP BI and what is the cocept of Batch Size
<heading 4> Dear Experts, I have to create a report on batch size adherence i.e. Actual Vs. Standard Batch Size Deviation,but i am unable to find batch size in sap R/3 AFKO & APPO tables and was unable to find it in material master too.
-
Report Unallocated Cash Item (Account payable)
Hi, I'd like to know the transaction to view a report about unallocated cash item. Thanks a lot!
-
Another kind of error, upgrading Cisco ISE 1.1.4patch3 to 1.2
I'm failing to upgrade our distributed ISE environment of 3 nodes. Using ise-upgradebundle-1.1.x-to-1.2.0.899.i386.gz, MD5 sum is verified. All nodes are running 1.1.4 patch 3 and the cluster is in sync. Trying to upgrade secondary admin node first a