Listener doesn't pick up messages from a particular source.

I have a queue populated from two different sources. My listener configured on that queue receives messages send from one source and not the other.
I can see the messages from both sources in the queue when I check through the server administration page.
To make things interesting, messages from both the source looks identical (in terms of all the properties except id and timestamp).
Any clues anyone?
Thanks

Are the two queues are having two different names.
which server are you using
Can you tell me how to see the messages from in queue from administration console

Similar Messages

File(FTP) Adapter doesn't pick any file from FTP server

Hi All,
This is a strange problem. I am trying to pick all the file from a FTP server using File Name: . . But the file adapter doesn't pick any file from the directory. When I change it to a specific file name eg. ABC.txt then it picks up the file ABC.txt only.
My requirement is to pick up all files in the directory and I just do not seem to understand what is wrong. I have used this wildcard option several times earlier and it always worked fine. But in this case, this does not work.
I changed the FTP server to point to an internal FTP server and it works fine.
I have checked all my parameters and everything looks okay. Like I mentioned earlier, if you specify exact file name, it picks up the file.
Any guess as to what is going on here?

Transport Protocol: FTP
Message Protocol: File
source directory: /test or test ( either one works)
file name: * or . or *.txt nothing works
server: ftp server name
port: 21
data connection: passive
user: ******
pass: ******
connect mode: permanently
transfer mode: text
QOS: exactly once
poll: 10 secs
processing mode: archive ( changed to test and delete as well, but made no difference.)
archive dir: dir path
file type: text
adapter specific attributes:
checked: set adapter specific attributes
and file name.
status: active.

JMS sender adapter is not picking up message from MQ

Hi Experts,
I have configured the JMS sender adapter for getting message from Websphere MQ. In RWB the adapter and the communicaiton channel all looking good. The trace file tells me the connection to the queue has been established.
But the problem is this JMS sender adapter is not picking up message from the Queue defined on the MQ site.
Any Idea what could be wrong?
Thanks!
Jason
Jason

Hi,
1) Can you activate the JMS adapter again ( edit save and activate it )
2) Check whether the right Queue is addressed.
Regards
Agasthuri Doss

"Messages" doesn't sync old messages from my iphone

Hello there,
I've got a problem since few weeks. Actually Messages app from my macbook doesn't sync old messages from my iPhone. It does sync new messages, that i'm sending from now, but it didn't take the olds. I would like to sync everything, knowing that "Messages" has very old messages which aren't more on my iPhone and that I want to keep.
So to resume : Messages app has got very old messages. My iPhone has got new ones. Very new text messages (since today) are saved on both. And I want to sync on Messages app messages which aren't there.
I hope it's understandable, sorry for my english ^^
Maurice.

Hi,
Messages on the Mac will only sync iMessages from the time the iPhone and a Mac are linked by adding the Apple ID to the iPhone and then the pop up accepted on the Mac to add the iPhone number to the list of Alternatives.
This means that a New Mac will not get older iMessages from the server (They actually no longer exist).
iMessages are "duplicated" at the iMessages Severs and sent out (pushed) to the specific devices.
Once that device has received the iMessage the iMessages is deleted from the server
This may mean an iPhone has an iMessages and that "version" has been deleted from the iMessages server - whilst a version that is going to be sent to the Mac is waiting for the Mac to respond so it's version can be sent.
iMessages are Pushed as it is called from the servers and not "fetched" like email are in the Mail app.
So...
A New iPhone will not get "old" iMessages that still show on a Mac.
If the Mac is New (or the Mac User accounts is new) and the iPhone has the "old" iMessages the Mac will only see/sync the "new" iMessages.
There are ways of using iTunes to Save a Backup of the iPhone and tools that can be downloaded to "Save" older Messages to the Mac if they have not synced in Messages.
However there is no method to get older iMessages on the Mac to put them on an iPhone
8:59 pm Friday; May 1, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to pick a message from a mail box using shell script

Hi
Can any one tell me how to pick a message from a mail box using shell script.
Thanks,
Suman.

Hi Suman,
Can any one tell me how to pick a message from a mail box using shell script.Grep for the message and then either cut or awk for the text. . . Something like this:
ls -al /mail/directory | grep "$1"* | awk '{print $9}'
Jon emmons has working samples in his book on Oracle shell scripting . . .
Hope this helps . . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference"
http://www.rampant-books.com/book_2005_1_awr_proactive_tuning.htm

Switched from 9900 to q10 and a particular i cannot receive messages from a particular bbm pin

switched from 9900 to q10 and a particular i cannot receive messages from a particular bbm pin
the messages are not being delivered to me from a particular pin

Can you send messages to that particular pin?
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

How do I stop notifications from a particular source?

Perhaps I inadvertently clicked on something recently, but I've begun getting notifications from "Mac Prices Australia" (I live in the United States). I can see the item listed in Notifications in System Preferences, but I don't see an option to remove it. Plus, there are a number of items here that I don't actually use and would like to remove. How do I go about this?

Well, I realize that would keep the notifications from appearing, but I also assume there's a bit of code for Mac Prices Australia that would still remain on my Mac, and I'd like to delete that entirely. I poked around in the Library, hoping to find a folder with these notifications, but I haven't found one yet.
I guess I titled my question incorrectly. I should have asked how to remove rather than just stop notifications from a particular source.

Delete All Indexed data in Oracle SES or Indexed data from a particular source (UCM,Discussion Forum)

Hi ,
We have configured Oracle SES 11.2.2.2 with Oracle Webcenter 11.1.1.8 and UCM .
We are able to index all the data successfully.
For some test cases , i would like to delete all the indexed data / indexed data from a particular source from backend and run crawlers again .
Is there any SP exists that can do the job or any table that i can purge to achieve this?
Thanks
Regards,
Sid

Hi Sripathy,
From webcenter we had crawled everything including the user profiles which are appearing in the search results , we would like to get rid of that indexed data and would re index data with params as /rsscrawl?excludedServiceIds=oracle.webcenter.peopleconnections.profile,oracle.webcenter.community,oracle.webcenter.list
We will try your suggestion for recrawling the whole source for our first requirement .
-Sid

Thunderbird doesn't download any message from any of the different email accounts

The app is not able to sync messages from the email accounts (IMAP)
I run thunderbird in Ubuntu 14.04 LTS
I tried to run it in "safe mode" but it doesn't change things
attached you can find a printscreen from the inizial part of error consol report
please, help me to find a solution

how about you clear the console and then screen dump the new stuff when you try and get mail.
Has it ever worked?
Firewall is not blocking ports is it?

Junk Mail folder refusing to show messages from a particular account

So, I have a weird problem with Leopard Mail (3.2) - when I click on the junk mail folder, 99% of the time it won't show messages from my Yahoo POP account. The only way I can get messages from this account to show is by expanding the junk mail folder, clicking on a different sub-account, then clicking on my Yahoo account. This will show the messages in its junk folder, and if I click on the combined junk folder they will show up inside it. This will work until I click away from junk - say, to my inbox - at which point the procedure will need to be repeated if I wish to see my Yahoo junk mail.
I've only noticed it very recently, but I'm not sure how long it's been going on. Unbelievably annoying. I deleted the junk folder, no luck. I toggled the account off/on - this seemed to work for a day, but the behaviour's back and I can't make this work again. I rebuilt the mailbox... Even deleted and added the account again, but it still did the same thing.
Has anyone else experienced this? Is it just a bug in Leopard Mail? Something specifically with POP accounts, perhaps? (My 5 IMAP accounts seem fine). If anyone has any further suggestions I'd be really, really grateful.

Ok, so, something in way of an update: Normal behaviour appears to be restored after Mail detects a piece of junk mail and puts it in the junk folder for this account (manual marking of junk doesn't do the trick). Then it works ok until I quit Mail.

Thunderbird doesn't pick up mail from Cox server

I just reinstalled Thunderbird after my computer (Windows 7) was wiped. I backed it up first, and I can see my email and address book. I can send mail, but I can't receive it, although I can see mail in my webmail at Cox. Thanks in advance. (It's possible that someone posted an answer to a previous, more vague, query, but I'm unable to access some older messages.)

Your provider should be able to provide you with the correct settings so you can see if you need to change anything.
If you want someone here to look at your settings you would have to post them. No one can guess what you have now.
From the Help menu select Troubleshooting Info, '''clear the box to Include Account Names.'''
Press Copy to Clipboard and come back and paste that info into a reply window.

ITunes doesn't pick up information from mp3 files - resorts into unknown..

I installed iTunes to use with my new iPod shuffle. Previously I had used Real Player to manage my music. All of my music in my library was setup in folders (i.e. Artist Folder\Album Folder\Tracck no. - Songtitle.mp3). This worked fine and all the information for the files was intact.
When I installed iTunes and added my music library to it, it resorted my songs and placed more than half of them in a folder called "Unknown Artist" and now all I have are hundreds of files with just the track and song title. If I open this folder with Windows (in My Computer) it shows all the information for the file (i.e. artist, album, etc.) but iTunes still placed it in "Unknown"
Just another shining example of Apple and PCs not playing well together? Has anyone else had this problem? More importantly, how do I fix it or can I use Real Player to manage music my iPod?
This is a real problem for me, I have over 2500 songs in my library and now over 900 are basically unidentifiable for artist or album....

First try another cable since Googling shows that has cause this problem in the past. Especially non-Apple cable.
Also see:
https://discussions.apple.com/thread/5748822?tstart=0

My BlackBerry Curve doesn't pick up calendar from yahoo mail.

When I synchronise my BlackBerry curve with my laptop it changes contact details ok but then fails to connect with the calendar in my Yahoo mail account. It tells me this - connection to Yahoo server was lost - I wonder what is happening and if there is any way I can synchrinise the two calendars.

Hi MaureenCooper,
What version of BlackBerry Desktop Software are you using?
Are you syncing your Yahoo Contacts?
Does your contact information show in a desktop program, such as Outlook or Windows Contacts?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Can I have the option of rejecting messages from any particular mobile?

Hello to all! Am new to iPhone. Mt previous inexpensive had this feature: I could bar any number from which I get uneeded messages. I have tried to do so on my iPhone 5 and have not been able to find such a feature. Is there any such feature on this phone? If not, are there any apps for the same?
Thanks in advance.

There is no setting on the phone that does this. Check with your carrier they may be able to help

Event structure doesn't handle all events from external DLL source

Hi!
I use a DLL, wich handles an USB CAN transceiver device, and generates LabVIEW user events with extcode.h and PostLVUserEvent() function.
In my vi I use an event case structure to handle theese external events. The problem is, that if the events come too frequently, then it cannot handle all events.
The vi contains a couple of parallel while loops which process the incoming data from the external event.
In another application I use the same architecture, and that works fine. This one is more complex.
Do you think I have reached the limits of the program? Or what else can be the problem?
I have tried to use a queue in the event structure, it helped a little, but yet, not all the events are handled. My external DLL sends all event, so the problem is not there.
Thanks in advance!

Hi Wasz,
Thanks for the post and I hope your well.
It is not possible for the event structure to miss events - it simply queues them up. To keep the event structure 'in time' with the code you must ensure the code to execute in each event is minimal to allow the event structure to handle the next event.
Please see this two links:
event structure buffering: leading to,
How to avoid built-up for "cursor move" events? : where somone is trying to avoid handling all events.
What sort of events are not being handled? Could it be an issue your events are not configured correctly? Maybe if you could produce a small example in LabVIEW code, so we can just test the event structure configuration... someone working around the external dll call - which you seem sure is working correctly.
In terms of queuing to process the events in other loops is certainly an option to speed up the event structure. To do this, use a produce/consumer design pattern.
hope this helps,
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

Listener doesn't pick up messages from a particular source.

Similar Messages

Maybe you are looking for