Listener serving two services. Need to stop connections to one of the Dbs
I have two Databases, a 10gR2 and an 11g Db in one machine. The 11g listener is serving both these Databases. I want to stop all connections to the 10gR2 database. How can i do that?
You can try to change the LOCAL_LISTENER instance parameter for the 10g instance to a unused port number on the current host. For example;
alter system set local_listener='(ADDRESS = (PROTOCOL = TCP)(HOST = <your hostname>) (PORT = 9999))';Check that the listener is no more listening for the 10g instance services:
lsnrctl status <your listener name>Note this should only disable new Oracle Net connections to the instance: existing connections are not affected.
Edited by: P. Forstmann on Jul 16, 2009 5:09 PM
Edited by: P. Forstmann on Jul 16, 2009 5:13 PM
Edited by: P. Forstmann on Jul 16, 2009 5:14 PM
Similar Messages
-
HT1657 Do I need a wifi connection to watch once the movie has been downloaded
Do I need a wifi connection to watch once the movie has been downloaded
Nope.
Watch it anywhere you want no connection needed. -
since i updated my iphone 4 to ios 6, i ve noticed that the wifi connection turns off each time when the screen is locked. I need to be connected with wifi all the time so as to stay updated with all my emails. is there anyway for this problem.
(PS: i know we could use 3G but i want to use wifi instead)I am having a really wierd issue as well that is probally related. I dont see 95% of the album artwork associated with my music. Also, it seems as if this has gotten worse since I started using that match feature
-
"Digital Editions could not connect to the fulfillment server. Please check your internet connection." This is the message I get, yet my internet connection is good. Help!
we dont have a answer
-
Hello! I bought an iphone on ebay. I feel the introduction says that is not a service. need to unlock official data on where the contract but I am not asking for help
I'm sorry but your post doesn't make much sense in English. You may want to try posting again in your native language.
Best of luck. -
Hi
I have installed coheI have installed coherence server "fmw_12.1.3.0.0_coherence_Disk1_1of1.zip" along with Examples on windows machine and C++ client coherence-cpp-12.1.3.0.0b51709-windows-x86-vs2012.zip on the same machine.
I have built the "contacts" C++ Example successfully and while I execute this "contacts" using run I am facing TcpAcceptor error.
On my coherence server the TcpAcceptor is listening on port 8088, so I have modified the extend-cache-config.xml file with values "ip address of my windows machine" and port as "8088".
All the time I am getting below error,
coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
at class coherence::lang::TypedHandle<class coherence::component::net::extend::PofConnection> __thiscall coherence::component::util::TcpInitiator::openConne
ction(void)(TcpInitiator.cpp:307)
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@029EAD78{Id=NULL, Open=1, LocalAddress=NULL,
RemoteAddress=10.242.152.242/10.242.152.242:8088}: socket disconnect
at class coherence::lang::TypedHandle<class coherence::net::messaging::Response> __thiscall coherence::component::net::extend::AbstractPofRequest::Status::g
etResponse(void)(AbstractPofRequest.cpp:203)
at coherence::component::net::extend::AbstractPofRequest::Status::getResponse
at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse
at coherence::component::util::Initiator::openConnection
at coherence::component::net::extend::PofConnection::open
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object
,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void
,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::io::IOException: socket disconnect
at unsigned int __thiscall coherence::net::Socket::readInternal(unsigned char *,unsigned int)(Socket.cpp:333)
at coherence::net::Socket::readInternal
at coherence::net::Socket::SocketInput::read
at coherence::io::BufferedInputStream::fillBuffer
at coherence::io::BufferedInputStream::read
at coherence::component::util::TcpInitiator::readMessageLength
at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify
at coherence::component::util::Daemon::run
at coherence::lang::Thread::run
on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"We are facing same issue. Could you please provide us any working .Net sample code for the version 12.1.2.0.
<ssl>
<protocol>Tls</protocol>
<local-certificates>
<certificate>
<url>c:\Cert\</url>
<password>password</password>
<flags>DefaultKeySet</flags>
</certificate>
</local-certificates>
</ssl>
thanks
Bala -
Dear Sir/Madam:
Good day!
I went to an Apple Store here in Legazpi City, Philippines and inquired from a store attendant about the problem of my IPAD 2 which lost its 3G feature after I downloaded the iOS7 operating system which she said needed to be "Restored" at a cost.
I am right now trying to "Restore" my IPAD2 to have the former 3G feature return and my IPAD2 is currently connected to one of the USB slots of my laptop.
Please help me how to go about it so I may be able to do it myself if it is possible.
Thank you.
Sincerely yours,
EDWIN M. VIBAR
([email protected])Make sure that you have the latest version of iTunes installed on your laptop and then follow the instructions here http://support.apple.com/kb/HT1414
-
I have two email accts. set in my iphone,one is the default setting.when I send an email it shows that it was sent from a 3rd email acct. that I no longer use,and had been deleted from my phone?
Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
We have created two partitions in removable drive(USB). One of the partition is active and the other is hidden. We are trying to access the hidden partition in Win PE 3.0 environment using WMI. VBScript code snippet used to detect the partitions is given
below:-
SetobjWMIService = GetObject("winmgmts:"_&
"{impersonationLevel=impersonate}!\\"&
strComputer & "\root\cimv2")
SetcolDisks = objWMIService.ExecQuery
Select * from Win32_LogicalDisk")
It will return the partition which is active but fails to list the partition which is hidden. The same piece of code was supported on WinPE 2.0I am giving the complete code, may be you are able to understand better. We are using Win32_LogicalDisk to retrieves the complete information of all the drives (like C:, D:) including removable drives.
Function
LocalDriveFound()
strComputer =
SetobjWMIService = GetObject("winmgmts:"_
"{impersonationLevel=impersonate}!\\"&
strComputer & "\root\cimv2")
SetcolDisks = objWMIService.ExecQuery
"Select * from Win32_LogicalDisk")
ForEachDiskDrive
IncolDisks
DriveLetter = Left(DiskDrive.Name,1)
DriveType = DiskDrive.DriveType
VolumeName = DiskDrive.VolumeName
WScript.echo Driveletter &
"|"& Drivetype &
"|"&VolumeName
SelectCaseDriveType
Case2 ,3
'Fixed or removable
If(VolumeName=USBVolumeName)
Then
If(DriveLetter<>
"Z")
Then
ChangeDriveLetterWithMountvol DriveLetter,
"Z"
EndIf
bIsLocal=
True
EndIf
If(VolumeName=USBRootName)
Then
If(DriveLetter<>
"Y")
Then
ChangeDriveLetterWithMountvol DriveLetter,
"Y"
EndIf
bIsLocal=
True
EndIf
CaseElse
EndSelect
Next
SetDrives =
Nothing
SetFileSystemObject =
Nothing
End
Function -
Dear All,
I'm working on reporting of Project Server 2010, while configuring SQL SERVER REPORTING SERVICES faced issue after two complete days of troubleshooting along with this gone through plenty of forums, unable to figure out any solution. So finally posting on
technet in order to find solution.
ISSUE/PROBLEM:
At initial configured the SQL REPORTING CONFIGURATION to sharepoint integrated database (SQL SERVER is installed on seperate machine), change the service to Domain Account and also installed sharepoint add in on server story was fine at this point. Furthur
moving to SHAREPOINT ADMIN console and while configuring the Sharepoint Integrated Reporting continuously facing this error:
Failed to establish connection with report server. . . . (Snapshot is attached for your further reference).
My point of concern is that whenerver i try to open the REPORT SERVER URL on project server machine it prompts me to enter username and password but whenever i insert the domain credentails it didnt accept though it can be accesible by using the credentials
of Local Admin of sql server machine. So i wana come to know whether its permission issue if yes then where i should mention the domain credentials.?
REGARDS DANISH DANIEDear Paul,
I am able to open the URL (http://psdb/ReportServer )using
domian credential and page open with these contents
Reporting Services Error
The configuration parameter SharePointIntegrated is set to True but Share Point Object Model cannot be loaded
Second,
Configured the SPN on domain controller , performed the steps required to change the AUTHENTICATION in rsreportserver.config
file also done the registry settings to disable the loop back settings.
Same error still ! .... what should i do now ???
REGARDS DANISH DANIE -
Hi All,
Need to restart exchange server 2013 services automatically at a certain period of time is there a script to schedule to automate can you please help me step by step process.
Thanks & Regards, Santosh Chowdary Vasireddy System Administrator Prolifcs DHFLVC Silicon Towers, 5th Floor, Survey #14, Kondapur, Hyderabad – 500 032. Work +91 40 3999 1999 Ex.1656 l Cell +91 9849277255 l [email protected] A Global
Provider of IBM, Microsoft and Testing Solutions Award Winner for Technical Excellence, BPM, SOA, Portal and GovernanceYou can create a PS1 file and run it in a scheduled task.
The PS1 files will need to have this.
Restart-Service MSExchangeTransport
Restart-Service MSexchangeIS
etc...
How to add a Scheduled task is given in this link.
http://www.mikepfeiffer.net/2010/02/creating-scheduled-tasks-for-exchange-2010-powershell-scripts/ -
Exchange Server 2013 Service Pack Upgrade - Outlook connectivity issue
Hi,
After upgrading to Exchange Server 2013 service pack 1, we are unable to connect via Outlook 2010 or Outlook 2013. Outlook Web Access is working fine though. We have followed all the instructions, and have applied Outlook upgrades, but the issue remain the
same. Outlook was working fine before the upgrade.
Have we missed out something. I would highly appreciate if someone can help out? I'm not sure if this is the known issue as I can't seem to find anything on the internet.
Already applied the transport fix.
Thanks in advance!Hi,
According to your description, your Outlook 2010 and Outlook 2013 come across the connectivity issue.
To narrow down the issue, I’d like to recommend the following troubleshooting:
1. Check if the issue happens on all Outlook users
2. Check the Outlook Anywhere connectivity by using ExRCA:
https://testconnectivity.microsoft.com/
Additionally, MAPI over HTTP is only supported when you use Outlook 2013 sp1 and Exchange 2013 sp1 at the same time. Since the issue also happens on Outlook 2010 client, we can firstly try the above troubleshooting.
If you have any question , please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support -
Can two different SRM clients systems connect to one R/3 Back-end system?
Hello,
Trying to developing SRM Co-Exist/Global strategy, based on the following scenario:
1. Two different SRM client systems, each at DIFFERENT SRM Version/Release Level. SRM system "A" runs in Stand-Alone and Extend Classic Scenario mode. SRM system "B" runs in Classic Scenario mode
2. Two different R/3 back-end systems, each with SAME R/3 4.7 Version/Release Level.
Question 1: Can the two (2) different SRM client systems be connected to one (1) of the R/3 back-end systems?
Question 2: Are there any Basis Plug-In (PI_BASIS) issues/difficulties to consider from either the SRM client or R/3 back-end side?
Question 3: Does each SRM client need it own unique transaction document type(s) and number range(s) definitions?
Question 4: Are there any other difficulties, for example, with RFC and Partner Profile related definitions and what are the steps to address/resolve difficulties?
Please advise and thanks in advance for your feedback!
Regards,
Ed
Edited by: Ed Shigo on Mar 16, 2009 6:40 AMQuestion 1: Can the two (2) different SRM client systems be connected to one (1) of the R/3 back-end systems?
They can be connected
Question 2: Are there any Basis Plug-In (PI_BASIS) issues/difficulties to consider from either the SRM client or R/3 back-end side?
Make sure that you have unique consumer entries for Middleware for Material replication, RFCs etc
Question 3: Does each SRM client need it own unique transaction document type(s) and number range(s) definitions?
Yes you need to have them.
Question 4: Are there any other difficulties, for example, with RFC and Partner Profile related definitions and what are the steps to address/resolve difficulties?
Don't see any difficulties as long as the a structured approach is followed. -
Need to Remote Connect to Mac at the Office... HELP!
Alright, I've seen topics similar to this one on the Leopard thread but I really, REALLY, need someone to help me. I know about Apple Remote Desktop but I don't have $300. I have downloaded Vine Viewer/ Vine Server VNC and Chicken of the VNC. When I'm at the office and connected to the office network I have no problems being connected and controlling my other Mac. The default port for forwarding is 5900 but is being used by another coworker, so I tried to configure port 6900. I'm not sure what I'm doing wrong so if someone could help me step by step that would be awesome. Thanks.
Please check out this thread. You don't need Vine server on the work machine. Set up the office computer like how I told Bruce to set up his Quicksilver. Your home computer is like his iBook. You won't need to deal with forwarding ssh port 22 on your home router, your work IT guy will have to ensure that that port will allow inbound traffic to pass to your work computer. Also, this will give you remote keyboard/screen, but you won't be able to drag&drop files across locations. To get that, tunnel afp as I discussed in a later post in that thread. Then you'll have both encrypted drag & drop and encrypted remote keyboard/screen.
-
HT201077 I need to stop photos from syncing to the ipod touch how
How can I find the menu where you can choose what sync's to the ipod touch? I cannot find it with the "new" set up. I need to stop the photos from my computer from moving to the ipod touch.
in iTunes while your iPod is connected - http://support.apple.com/kb/HT1386?viewlocale=en_US&locale=en_US
LN
Maybe you are looking for
-
I changed permission setting on main disk...took forever now when I bootup I get the chime...apple icon...fan noise...thats it...internal drive is broken...no Mac install disk..I have a windows XP desktop with installation disk..if I was to get exter
-
Trouble with Mac mini and samsung 5 series tv
Hi there, have just bought a second hand mini and trying to hook it up to my samsung 5 serties tv!!! easy or so i thought!! iget the apple loading screen (grey one!) and then it goes blank and nothing else happens! has anyone got any suggestions? tha
-
Windows 7 doesn't work optimal
Hi, i've installed W7 with bootcamp and all the drivers + bootcamp 3.1 and bootcamp 3.2, but my graphics doesn't work optimaal. ormaal kleurt de taakbalk mee met de achtergrond, maar mijne is grijs - blauw en ik kan het niet veranderen bij mijn perso
-
In Classic Scenario SRM 5.0 with ECC 6.0, how can I create an ECC Contract with a requirement from the Purchaser's Worklist ? Do I use the Global Outline Agreement? If so, what are the config steps ? Full points assured. Thx. Raja
-
Performance Issue with the Query urgent
is there any way to get the data for the material Rejected with Movement type 122 & 123 except MSEG table, as my report is very slow... my query is as below : - SELECT SUM( a~dmbtr )INTO value1 FROM mseg AS a INNER JOIN mkpf AS b ON ambl