Live in China, need to send to the U.S to fix

Hi,
I currently live in Beijing, my friend bought me an iPhone 4 from the states (AT&T) but the sim card tray is stuck and the apple here, refuse to fix it. I talked to the Apple people in the U.S and they said I need to send it to the states and they will replace my phone.
Sending it is expensive and might get stolen on the way, in your opinion, should I try to give it to non authorized people here who fix cell phones and stuff? Will I loose my insurance if they will open the phone? The sim tray problem, is a common one, do you think Apple should pay for the delivery?
Any advice will be welcome,
thanks...

Apple warranty for the iPhone is country specific... this is nothing new.
If anyone other than Apple opens or works on the device, the warranty is void.
This is exactly why everyone recommends purchasing an iPhone in the country where it is going to be used most frequently.

Similar Messages

Reg: PO release notification needs to send to the PR Creater with PO num

HI Gurus,
Iam new to workfow. I have one senario in workflow.
Requirement: when ever PO release notification needs to send to the PR Creater with PO number and corresponding PR number.
Please guide how to do this .
My questions :
1.How can we can get the PR Creater user id to send notification mail
Thanks & Regards
Ramesh

Hi Ramesh ,
Which workflow you are using for PO . If it is the standard one , there is a rule used in the worklfow called 20000027.
In this there is an USer exit . In this exit , you can write your code for sending the workitem to the PR creator.
If you are using a custom workflow for this , then create a new rule and in that write the code for fetching the PR Creator and assign the user ro the actor tab. Incluse this rule in ur task .
This will solve your problem.

Look I need to send my Ipod in to get fixed but I don't know where to send it so I need help!?!?!?!

When I got my ipod which was about 2 years ago I had went go disconnect the charger from the ipod and the place where the charger goes busted out and I wasn't ruff with it. It just fell out and I wanna send it in but I don't know the location and I don't have a store near me at all so I would need to send it on my own.

Follow the instructions here.
Apple - Support - iPod - Service FAQ

All Line Items need to send in the PO Change EDI IDoC - ORDCHG

Hi EDI Experts ,
We have ECC 6.04.
We are sending PO Change Message Tyep by using Message Type ORDCHG ( Basic Type ORDERS05)
If PO Changes system trigger IDoc and in Std IDoc it displays only that Line Item who had been changed .
Requierment is that if there is change in any single item, then sytem should send entire/whole PO document ( all Line Items) .
I think we need to write some code in teh routine /requierment ...etc.
Can anyone suggest what I need to do to acehive the above ?
Thanks
NAP

Hello NAP ,
I have the same problem that you. I ´m using the message type ORDCHG with basic type ORDERS05. when sending change order through Idoc only show me the updete/delete Item in segnment E1EDP01.
What object did you use for the message type ORDCHG ?
What settings should I consider for this?
Thanks in advance,
Luis.-

Send all the pdf with mail

Hello!
In my pdf's file, i have a button that send a xml file with the pdf's content, but i need to send all the pdf with mail, i need to send a .pdf file with mail, not an xml. Is it possible?
Thank you

put this script under a button
event.target.submitForm({cURL:"mailto:[email protected]?subject=Submitted Form&body=Please find attached the completed form.",cSubmitAs:"PDF",cCharset:"utf-8"});
[email protected]

HT204266 I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the di

I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the differences between countries' iTunes offerings? Does one really need an address and a credit card for any country to be able to access that countries iTunes store? Why these restrictions?

You cannot.
You cannot use another countrys itunes store.
You must be physically locates inside the borders of a country to use that countrys itunes store and a credit card issued in that country with a valid billing address in that country.
The owners of the distribution rights of movies/music/etc differ by country. These distributors decide who can sell their content in that country.
Buy from another source if your countrys itunes store does not carry somehting that you want.

Why does the iPhone 4 need to send an SMS to activate FaceTime when the iPad 2 doesn't?

Hi there.
I keep wondering why iPhone 4 need to send a international SMS to activate FaceTime when the iPad 2 doesn't?
It cost's 2,50 dkr ($0.48) every time it does that.
I have a mobile subscription where i get 5 hours talk time, Free SMS, Free MMS, Free talk to all with same subscription and 5GB data for 129 dkr/month ($24.77).
But the internation SMS is not free.
And it really bugs me that my danish iPhone has to send an SMS to England to acticate FaceTime that i only can use on WiFi.
I also have a iPad 2 (WiFi model), and it can activate FaceTime fine via WiFi. So why can't the iPhone 4 do that?
I really really need a good explanation to why i have to pay to activate FaceTime.
Why can't you make local numbers to send the SMS too, or do it via WiFi just like the iPad 2.
The strangest this is that you have to be on WiFi to use FaceTime, so why use the mobile network to activate FaceTime?

Where are you, what network are you on and where did you get your phone?
The fact that it uses SMS isn't really the issue here and no-one on this forum can answer the "why" question. We are end users, not Apple. The accepted answer is if it's going to tie facetime to your phone number (which it does) then that's the way it's got to work.
The puzzling part is why it would be sending one to England... unless of course, you purchased the phone in the UK and actually live in another region entirely.

HT4528 im trying to download an app on my new ios 7 update and it popped up something that said i need to accept to the following to procede download so i clicked on that and it popped up the page and when i tried to click send me an email to accept it it

i tried to download an app on my ne ios 7 and something popped up that said i needed to accept to the following so i clicked on that and the page popped up and when i tried to click on the button that said send email to accept it wouldnt let me click on the button and now i cant download any apps on my phone

There must be a problem with the app store right now as a number of people seem to be having this problem right now. Try purchasing it using iTunes on your computer, accept the terms and conditions there, then either sync it to your phone or download it on your phone as a past purchase (http://support.apple.com/kb/HT2519).

How can I get a representative to help me with my Apple ID when I live in China (where I don't speak or read the language) and I created it in Canada (where I used to live)?

I explained to Kavitha from the iTunes Store Customer Support the following information:
- my home country is Canada
- I am an English speaker
- I currently live in China, but I don't read or speak Chinese
- my Apple ID was created in Canada
- my husband bought me a new iPad last Sunday in China where we live
- I couldn't remember the answers to my security questions, so I followed Apple instructions to reset it by adding a rescue email address to my Apple ID
- I have received no email message in the inbox for my rescue email address as promised to help me reset my security questions for my Apple account
- I updated the email address for the Apple ID (the login) and, for some reason, my old Apple ID is still showing up on my new iPad when I try to sign in
- you told me to select the website of the country that I live in (which is China - I've already explained this) and therefore directed me to a Chinese website which I CANNOT read
- I was NOT asking Kavitha about how to change the language on my new iPad and she sent me an article about resolving that type of issue in error
- I can't choose Canada as my country because I don't live there ANYMORE and I don't have a Canadian phone number anymore
- I have a Chinese phone number because I LIVE in China
Response from Kavitha:
- she can't help me
- advised me to select the website of the country that I live in which is China (I already explained this) and therefore directed me to a Chinese website which I CANNOT read
- not helpful
- also, I can't schedule a call using China as the country associated with my Apple ID because everything will be in Chinese and a Chinese representative who I will NOT be able to understand will call me
Can anyone at Apple help me????

Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
Regards.

HR: Need to Send the Paysilp as a PDF file through Mail to Employees

Dear All ,
       Need to Send the Paysilp as a PDF file through Mail to Employees.
       can anyone please suggest any Standard Function Modules which takes the Payslip Form as input and convert it into PDF and can send it through mail to the concern employees.
      Can anyone please explain the procedure in detail.
Thanks in Advance,
Regards.

venu,
below is code which helps to generate pdf ,,,,hope u know how to use the mail sending function
data:
fm_name TYPE RS38L_FNAM, "Smart Forms: FM Name
sf_name TYPE TDSFNAME
value 'YOUR_FORM_NAME', "Smart Forms: Form Name
P_OUTPUT_OPTIONS TYPE SSFCOMPOP,
P_JOB_OUTPUT_INFO TYPE SSFCRESCL,
P_CONTROL_PARAMETERS TYPE SSFCTRLOP,
P_LANGUAGE TYPE SFLANGU value 'E',
P_E_DEVTYPE TYPE RSPOPTYPE.
data:
P_BIN_FILESIZE TYPE I,
P_BIN_FILE TYPE XSTRING,
P_OTF type table of ITCOO,
P_DOCS type table of DOCS,
P_LINES type table of TLINE,
name type string,
path type string,
fullpath type string,
filter type string,
guiobj type ref to cl_gui_frontend_services,
uact type i,
filename(128).
GET SMARTFORM FUNCTION MODULE NAME ---
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = sf_name
IMPORTING
FM_NAME = fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
I_LANGUAGE = P_LANGUAGE
I_APPLICATION = 'SAPDEFAULT'
IMPORTING
E_DEVTYPE = P_E_DEVTYPE.
P_OUTPUT_OPTIONS-XSFCMODE = 'X'.
P_OUTPUT_OPTIONS-XSF = SPACE.
P_OUTPUT_OPTIONS-XDFCMODE = 'X'.
P_OUTPUT_OPTIONS-XDF = SPACE.
P_OUTPUT_OPTIONS-TDPRINTER = P_E_DEVTYPE.
P_CONTROL_PARAMETERS-NO_DIALOG = 'X'.
P_CONTROL_PARAMETERS-GETOTF = 'X'.
****...................................PRINTING.........................
CALL FUNCTION fm_name
EXPORTING
CONTROL_PARAMETERS = P_CONTROL_PARAMETERS
OUTPUT_OPTIONS = P_OUTPUT_OPTIONS
(....) <--- your form import parameters
IMPORTING
JOB_OUTPUT_INFO = P_JOB_OUTPUT_INFO.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
P_OTF[] = P_JOB_OUTPUT_INFO-OTFDATA.
****...................................CONVERT TO PDF...............
CALL FUNCTION 'CONVERT_OTF_2_PDF'
IMPORTING
BIN_FILESIZE = P_BIN_FILESIZE
TABLES
OTF = P_OTF
DOCTAB_ARCHIVE = P_DOCS
LINES = P_LINES
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
now you can mail the pdf.
Reward points if helpful
Regards,
jinesh

A UK calendar has appeared on my phone. I live in New Zealand and don't need a reminder of the Battle of the Boyne! How do I get rid of it (why is it there)? There is no option to delete.

A UK calendar has appeared on my iPhone 5s. I live in New Zealand and don't need a reminder of the anniversary of the Battle of the Boyne!. It just appeared after the last update. No option to remove it in edit. How can I get rid of it? A New Zealand holiday calendar would be a help instead!

Set the home page to http://www.google.co.nz/
*https://support.mozilla.com/kb/How+to+set+the+home+page

What information do I need to send in my IPod touch to be replaced and how do i get the box to ship it in

What info do i need to send in my ipod touch to be replaced (i still have the 1 year warranty) and how do i get the box to ship it in also I have no clue what the address is please help

The instructions on how to obtain warranty work is covered here:
Apple - Support - iPod - Service FAQ

I need to send a lot of invitations by e-mail today. How can I do this without problems? Last time I ried, I got the message that I was not allowed to send more than a special amount..

I want to know how I can assembly the adresses so that I can send everything the same day. Otherwise, I can't remember to whom I have (or have not!) sent my e-mails.
I need to do that some times a year, when I send invitations för me little art-gallery!
I would be grateful if you could answer as soon as possible, becaue the happening-day is tomorrow abnd I am very late for sending the invitaions..

There are currently 3 threads re: battery performance and a solution to improve it.
do a quick search in the forum and it will yield you those results.

I need to send my iphone in for a repair, a box to do so was sent to me but it has expired, how do i request a new one or at least the sticker?

I need to send my iphone in for a repair, a box to do so was sent to me but it has expired, how do i request a new one or at least the sticker?

Repeat the process you used to obtain the first box.

InDesign CC no longer packages fonts when I need to send a project to the printer

Hey Adobe team: Long-time user from when Photoshop was but a sprout. I recently upgraded from Creative Suite 6 to Creative Cloud and have run into a troubling problem. InDesign CC no longer packages fonts when I need to send a project to the printer. This meant that I had to completely redo a project on deadline for a problem that I’ve never had before. How is this possibly helping your users? And is there a solution in the works or do I need to cancel Creative Cloud and go back to CS6?

@OurPlace
First of all, you are not addressing any Adobe team. These forums are primarily supported by volunteers who are not Adobe employees and don't officially represent Adobe Technical Support.
That having been said ...
There was nothing done specifically with InDesign 9 or 10 (the CC and CC 2014) versions of InDesign to change or disable packaging of fonts when packaging a document. It should be absolutely no different from InDesign 8 (the CS6 version).
Troubleshooting hints:
(1)     Make sure you check the Copy Fonts (Except CJK and TypeKit) option in the package dialog.
(2)     Make sure that you are not using any CJK (Chinese, Japanese, and Korean) complex fonts that we specifically will never put into a package.
(3)     TypeKit fonts won't package.
(4)     Make sure that your file system permissions are such that InDesign can create all the necessary directories and subdirectories for the packaging operation.
(5)     If on MacOS, exit InDesign and try forcing a clearing of your system font cache and then reboot.
(6)     Exit InDesign and then find and delete all files on your system with filenames of the form AdobeFnt##.lst where ## is a two digit number; don't delete any other files that start with AdobeFnt. Then reboot and restart InDesign.
(7)     Reset InDesign's preferences that may have become corrupted. For Windows, start InDesign, and then press Shift+Ctrl+Alt. Click Yes when asked if you want to delete preference files. For MacOS, while pressing Shift+Option+Command+Control, start InDesign. Click Yes when asked if you want to delete preference files.
One of these should either address or resolve your problem. Again, we at Adobe are not aware of any generic issue with packing fonts with InDesign.
          - Dov

Live in China, need to send to the U.S to fix

Similar Messages

Maybe you are looking for