LMS 3.2 and MS SCOM and SCCM

Is there any recommendation regarding installation of CW LMS 3.2 and MS SCOM and SCCM on the same server?

This was not tested internally, so I cannot say whether or not there are any conflicts or problems. If possible, consider virtualizing LMS on one VM with the MS managers on another VM. Provided resources on the hardware are sufficient, this would be the safest course if all suites need to be on the same physical server.

Similar Messages

Upgrade from LMS 3.0.1 to LMS 3.1 or 3.2 and problem with devices update

Hello
How to upgrade from LMS 3.0 December 2007 update to LMS 3.1 or LMS 3.2. The problem is the large number of C2960S-24TS-L switches that my organization has and cannot managed them..
I tried to upgrade devices through Software Center but always Ciscoworks informs me with the following message.
"Error while downloading package information from Cisco.com for the selected products. See the log file for details".
Also i can not run EOL/EOS inventory report. The message is
" INVREP0102: Cisco.com user credentials are invalid. Enter correct credentials." I check my credentials and is right.
The server has access to www through proxy without any restrictions.
In the past I've already updated devices through the software center. Also in the past i ve run EOS/EOL inventory reports.
The LMS 3.0 December 2007 has the following products
LMS
3.0.1
16 May 2008
CiscoWorks Common Services
3.1.1
02 Jul 2009, 07:44:58 EEST
2.
Campus Manager
5.0.5
11 Oct 2009, 07:36:10 EEST
3.
CiscoView
6.1.7
02 Jul 2009, 07:45:05 EEST
4.
CiscoWorks Assistant
1.0.1
02 Jul 2009, 07:45:05 EEST
5.
Device Fault Manager
3.0.5
12 Jun 2010, 07:31:48 EEST
6.
Internetwork Performance Monitor
4.0.1
02 Jul 2009, 07:45:11 EEST
7.
Integration Utility
1.7.1
02 Jul 2009, 07:45:14 EEST
8.
LMS Portal
1.0.1
02 Jul 2009, 07:45:16 EEST
9.
Resource Manager Essentials
4.1.1
02 Jul 2009, 07:45:17 EEST
Has anyone knows what can be the problem??.
Thanks

Hi,
the problem to access cisco.com is because of a "bug". Its ID is CSCto46927.
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCto46927
Symptom:
After the 16th of June 2011 LMS will no longer be able to download Software and Device Package updates, or PSIRT and End of Sale/Life information from CCO
Conditions:
Hosted services in Cisco.com that are being leveraged by LMS, for downloading the latest Software and Device Package updates, as well as the PSIRT and End of Sale/Life information are being migrated to a new framework and the old services will be retired.
This will affect all LMS 3.x and 4.x versions.
Refer to https://supportforums.cisco.com/docs/DOC-16806 for more information
Workaround:
Users of LMS 3.2.1 , 4.0 should install the patch that can be downloaded from cisco.com
Users of earlier version will need to upgrade to LMS 3.2 and then install the LMS 3.2 SP1 patch set before installing the patch"
Because of that it is necessary to upgrade not only to 3.1 or 3.2, you need 3.2.1 to get the patch and then access to cisco.com again.
The question about the better way for updating I can't answer. I did a update to 3.1 and then to 3.2. But I think you will find the requirements for the updates in the notes for them.
But I can't find LMS 3.1 in the cisco download center. There is only 3.2 and 3.2.1 available for me.
Sven

SCOM and SharePoint 2010 Add-In for Dashboards (Issue)

I have an environment with SCOM 2007 R2, all working fine. I have installed ans new test server to integrate SCOM and SahrePoint 2010. On this server I have installed Visio 2010 (Yes, I know, never install Visio in a server, but this ins juts for test).
I have installed Visio Add-In and SharePoint 2010 Add-In.
All my dashboards created in Visio to reflect health state are working fine on Visio, in fullscreen. But, When I import this Visio file, (in . VWD), to SharePoint, I can see normally the Visio in my Webpart, all showing fine (I have used the step by step
to configure SCOM and SharePoint integration). But, after my first Refresh for the diagram all Health State Icons becomes a FAIL Icon (like image below). This sounds like some permission problem, because on Visio all Health State Icons works fine.
Someone can help me?

I have used this step by step before, but I think the problem is a parte, because I dont understand better, the part is:
To configure Visio Services for Read-Only Operator permissions on the RMS
In order for Visio Services to refresh the diagrams that are published and connected to Operations Manager data, the Visio Services service application must be configured with credentials that have access to the RMS. This is because
the Visio Services service application is executing the data provider which is responsible for returning the updated dataset from the RMS.
The easiest way to configure this is to make the account that Visio Services is running as a Read-Only Operator on the RMS.
To do this…
Create domain account
Run the Operations Manager console.
From the Administration tab click on User Roles.
In the User Roles list double-click on the Read-Only Operators role.
Add the account that is configured for Service Application Pool.
Can anyone help me about where configure this account on SharePoint??

SCOM and Dashboards, SharePoint - Visio - PerformancePoint - suggestions

Looking for a suggestion on what is the best tool/platform for integration of dashboards for SCOM. Need a replacement for our existing system that is being outdated. Need something very flexible giving insight into system infrastructure (CPU Memory
Disk etc), application (Web services, web requests, web site, etc), and network (speeds, latency, etc). We have a good foundation with SCOM 2012 and the SCOM APM, so looking to pull that data source as the base. Have looked at the built-in SCOM
dashboards, Visio, SharePoint (we have servers), and now I see something called PerformancePoint. Getting overwhelmed at what is out there and just need some direction, we run in a OPS Team fashion, with monitors displaying running statistics and performance
metrics (graphs and gauges) that are reacted upon during escalations.

Hi,
In addition above, please also check below articles for more information about SCOM dashboard and sharepoint and performancepoint server:
Using SharePoint to View Operations Manager Data
http://technet.microsoft.com/en-us/library/hh212924.aspx
Publishing SCOM 2012 dashboards to SharePoint
http://blogs.technet.com/b/kevinholman/archive/2013/04/03/publishing-scom-2012-dashboards-to-sharepoint.aspx
Operations Manager and PerformancePoint Server
http://blogs.technet.com/b/momteam/archive/2009/02/04/operations-manager-and-performancepoint-server.aspx
Regards,
Yan Li
Regards, Yan Li

Best practise for installing patches for SCCM Client 2012 (Both x86 and x64)) - OSD and Client Push Installation

Hi All,
What is best practice for automatic installing of SCCM 2012 client Patches
(using Patch switch) during installation of SCCM 2012 clients? The challenge is that now there are two versions of clients and updates (x86 and x64).
I need information for:
OSD
Client Push Installation
Thank you in advance.
Regards,

Not everything that can be or is supported or not supported is documented (or ever can be):
http://technet.microsoft.com/en-us/magazine/jj643252.aspx
Your expectation here needs to be adjusted. No one recommended contacting support. William just mentioned that *if* you have an issue and needed to contact support, they may decline to help you because you've done something explicitly unsupported.
For clientpatch, here's the specific documentation noting it as unsupported:
http://blogs.technet.com/b/configmgrteam/archive/2009/04/08/automatically-applying-hotfixes-to-the-configuration-manager-2007-client-during-installation.aspx
Additionally, I've also been in contact with the sustained engineering folks responsible for the CUs and they've reinforced the statement.
What can happen? Who knows? Microsoft does not test against unsupported configurations and features -- that's the definition of unsupported. It's not tested so no one really knows. They did find a couple of explicit issues (outlined in that post above) so
know that at least those exist and probably more since it is, as mentioned, abandoned code.
Why does it matter what can happen though? If the folks who write and support the code tell you shouldn't do it, you are simply asking for problems by doing it. Ultimately, you're asking a question that has no defined answer (except "bad"/unsupported things)
that really doesn't matter if you follow the explicit guidance. If you don't, as William points out, that's a risk for you take and an answer for you to discover.
Jason | http://blog.configmgrftw.com

LMS 4.2.4 Threshold Settings and High Severity Faults

Hi,
I have implement the LMS 4.2.4 few months back. I tried to setup the unreachable alert when some switch is down. I understand that the new LMS do not have the feature and it only can send out alert when reach some threshold.
I tried to click on the Fault > Threshold Settings and getting the below error message.
Cannot retrieve the list of groups from the grouping service.
Please check the PTMClient.log file for more details.
I have attached the log files. Anyone know how can I resolve it? Really completely out of idea.

your server has CTM errors as following :
27 May 2014|15:09:37.137|ERROR|PTMClient_Log|Thread-53|PTMOGSInteractor|getThresholdGroupFilter|.|CTMRequestProcessor::handleRequest() : java.lang.NoSuchMethodException
27 May 2014|15:09:37.139|ERROR|PTMClient_Log|Thread-53|PtmThresholdAction|perform|.| Exception occurred while applying OGS filterCTMRequestProcessor::handleRequest() : java.lang.NoSuchMethodException
27 May 2014|15:09:37.139|ERROR|PTMClient_Log|Thread-53|PtmThresholdAction|perform|.|java.lang.Exception: CTMRequestProcessor::handleRequest() : java.lang.NoSuchMethodException
at com.cisco.nm.trx.ptm.ui.PTMOGSInteractor.getThresholdGroupFilter(PTMOGSInteractor.java:314)
It may be a corrupt DFM DB which may lead you to re-initialize your DFM DB, procedure here.
Mostly such CTM errors are sometime due to some port clash or resource crunch, try to remove/disable any unwanted third part software, specially Antivirus and Active scan for sometime and reboot your server to see it goes away.

How to get alerts out of SCOM and into a 3rd party management tool

Hi
I am creating an integration between a 3rd party management tool and System Center Operations Manager 2012 R2. I need to export alerts such as Power Off / Power On / Configuration change for both virtual machines and hyperv servers from SCOM
into our application. Our application runs on linux so I cannot do any .NET programming, however I can run Powershell scripts remotely using WinRM.
What is the best way to do this? I am aware of using the powershell cmdlet Get-SCOMAlert but is there any other way that does not involve polling?
thanks in advance

Think of Orchestrator as a "router", that will route information and workflows between SCOM, and [insert 3rd party product here]. Depending on your 3rd party product, there may be an "integration pack" for it that Orchestrator can use for out of the
box tasks.
So what's an integration pack? Well - think of it like a management pack, but for Orchestrator. SCOM does monitoring, but it doesn't know how to monitor something unless you install the relevant management pack. The management pack contains
all the rules/monitors for monitoring whatever it is you wish to monitor.
Well, an integration pack is similar in concept, except it tells Orchestrator how to interface and integrate with whatever it is you're trying to perform tasks with.
For what you want to do, there is a SCOM integration pack. This is a set of tasks that can get alerts and events out of Operations Manager (there are also tasks that can create and close alerts in Operations Manager).
From what I can imagine - you would want to get alerts out of SCOM when they happen (so you would use one of the SCOM orchestrator tasks to "get alert if status = new, and source = myapplication"), and then you can pass that alert to another task - such
as write it to a CSV file or something. You could then have another task that picks up that CSV file, and passes it to your application where it can be captured. Or you could use the CSV to populate variables in a powershell script, and then powershell
that information into your app.
There are many ways you could do this, but I do believe that Orchestrator would be the better option.
http://www.dreamension.net

CAS and three primary hierarchy SCCM 2012 r2 can i get any runbook from microsoft for Step by step installation

Hi All
need CAS and three primary hierarchy SCCM 2012 r2 can i get any runbook from microsoft for Step by step installation
need step by step installation guide with screenshots.

There's a lots of installation guide but each guide is for a "standard" installation, your environment is unique and you should get help to be sure to implement SCCM to fulfill your needs.
Installing SCCM without any experience will be tricky and maintain it will be even harder. This is not a simple product.
http://sccmentor.wordpress.com/2014/01/08/sccm-2012-r2-step-by-step-installation-guide/
http://www.windows-noob.com/forums/index.php?/topic/4045-system-center-2012-configuration-manager-step-by-step-guides/
Benoit Lecours | Blog: System Center Dudes

Adobe Reader 9.1 and Flash 10 installation SCCM command

Hi All
I planning to update our Adobe Flash and Reader version to the latest one.
Our environment is a little messy because we have got different version all over the place. Have you guys had same issue how should I remove different version of adobe application via SCCM?
Another question is do you guys have got command line to install Adobe Flash and Reader via SCCM using msiexec option to install with out reboot, silent and never ask for adobe update notification (As attached file)?
Thank you all.

No let me clarify. Adobe has a tool that allows you to create an answer/configuraiton file to do unattended installs of Adobe products. So what we were able to do was use this application suppied by Adobe to create a separate answer file (MST file) that was used in conjunction with the .msi package to deploy the Adobe software with all of the settings and configurations required by the organization, such as the disable of auto update and application of patches etc.
What you need is the stand alone redistibutable adobe msi package and the following program.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=3993
If you download that application it lets you create a custmized install of Adobe Acrobat using that MST transform file in conjunction with the .msi file. Once you have created the answer file and configured the install the way you want all you have to do is create the SCCM package using that syntax pointing to your custom msi and mst files and it should execute. It is very granular right down to removing splash screens etc.
I also confirmed that for the flash update I just used the following command for my program to execute within SCCM and this worked to install the latest version of Flash. This just does a silent install
Msiexec /i <path to Adobe Flash msi file> /qn
This just does a silent install of the mis package with no user interaction. There is no removal or reboot required for adobe flash so it should not be an issue.
Here is a list of the different commands and switches you can use on an msi package.
http://msdn.microsoft.com/en-us/library/aa367988(VS.85).aspx
Hopefully this helps

LMS 3.2-2.6 : migration and master/slave

Hi,
Customer has 2 LMS 2.6 standalone server, server A and server B
He wants to migrate both to 3.2 and he will have a new LMS 3.2 server C.
He would like to have server C master and server A and B slaves.
Do you think that we can migrate server A and B to LMS 3.2
Then, configure server C as master and server A and B as slaves without lost DCR data from server A and B ?
Many thanks, Elisabeth

No, this will not be possible. When you demote A and B to slaves, their DCRs will be overwritten by the new DCR on C. You can maintain the consolidated device list, but not the application data.

What is difference between sy-index and sy-tabix and where both are using ?

what is difference between sy-index and sy-tabix and where both are using ?

hi nagaraju
sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
SY-INDEX is a counter for following loops: do...enddo, while..endwhile
SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
Here is an example from which you can understand the difference between sy-tabix and sy-index.
Itab is an internal table with the following data in it.
id Name
198 XYZ
475 ABC
545 PQR.
loop at itab where id > 300.
write :/ itab-id, itab-name , sy-tabix, sy-index.
endloop.
My output will be :
475 ABC 2 1
545 PQR 3 2
Sy-tabix is the index of the record in internal table.
sy-index gives the no of times of loop passes.
So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
Regards,
navjot
award points

Hi Guys, I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
Alex

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Customer/Vendor A/C with line item details and with opening and closing Bal

Dear Sir / Madam,
Is it possible to have a customer and / or vendor Sub-Ledger account-
with line item details and with opening and closing balance detail
for a particular period.?
Regards
Chirag Shah
I thank for the given below thread which has solved the same problem for G/L Account
Re: Report to get the ledger printout with opening balances

Hello Srinujalleda,
Thanks for your precious time.
I tried the referred T-Code
But this report is not showing Opening balance, closing balance detail.
It only gives transactions during the specified posting period and total of it.
Please guide me further in case if I need to give proper input at selection screen or elsewhere.
Client Requires Report in a fashion
Opening Balance as on Date
+ / - Transactions during the period
= Closing Balance as on date
As that of appearing for G/L Account by S_ALR_87012311
Thanks once again & Regards
Chirag Shah

Open sales orders and open deliveries and open billing doc to sap from legesy

Dear all
i have some open sales orders and open deliveries and open billing doc are there in the legesy system
so i want to know how to transfer the doc to sap by using lsmw plz tell me

Hi Amith,
it is always good to search in Google before posting .LSMW is very old topic and i am sure you will get lots of Documents on this .Please go through the below link .you will get some idea on this.
http://scn.sap.com/thread/1012472
there are 14 steps in LSMW and it is same for all (master data and Transaction Data)
Pls practice this in your sand box or quality system before working it in the client requirement.
Hope this helps to you
Regards
Sundar

I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up und one account.

I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up under one account.

You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.

LMS 3.2 and MS SCOM and SCCM

Similar Messages

Maybe you are looking for