LMS 3.2 Interface Inventory

Is there a way to create a report of interfaces that contains the information contained in the Module Port Interfaces section of the detailed device report?:
I've attempted creating some custom templates to create a single table containing this information, but have not had any luck. In particular I'm interested in the Port Vendor Type along with Admin Status and Operational Status to identify all the active optical/removable interfaces such as SFP modules and XENPAKS for all devices in inventory, primarily 6500s. Thanks.

These properties are not yet available in custom reports. I've been pushing to get all inventory attributes available in custom reports as part of CSCsj78780. Unfortunately, not all of the attributes are there yet.

Similar Messages

Interface inventory and training

Hi all
About the interface inventory and training:
I’m working in a SAP solution implementation, just at the preparation phase.
We have already identified the external systems that have to be integrated with our SAP
solution and my client would like to know which is the most suitable training,
as general approach, he should follow to understand how interfaces work and how
they are established between the external system and SAP.
Could anyone give me some advice?
Thank you
Xavier Llurba

Hi Abhinav ,
I have tried that frist but it was not helpful for me . Sh module is only giving the below out put .
Kindly share if you have any feedback .
Rgeards
Vineeth

LMS 4.0.1 - inventory does not provide details about ports on T1/E1 HWIC

Hi,
I'm running LMS 4.0.1 on Windows Server 2008 Standard SP2
In the management system I have Cisco ISR 2921 and Cisco ISR 3945 devices with Cisco 4-Port Clear Channel T1/E1 High-Speed WAN Interface Card.
The issue is that for some of those devices, the inventory does not discover the ports on the T1/E1 HWIC card
When i run a Detailed Inventory report (attached is a screenshot) it shows that there is T1/E1 HWIC in the device, but it states the it has 0 ports. In the same time these ports are operational and are managed by the Fault Monitor application.
Another thing is, when i use CiscoView to monitor/config the device, it does not show color information about these T1/E1 ports (screenshot attached).
The SNMP settings are verified.
Any idea would could be the problem?
KR,
Velin

Hello Colin,
Thank you for your help.
I have copy the "List Access Servers" in below:
Name Hostname Port
acs001 scvs032.test.com 6021
acs002 scvs033.test.com 6021
acs003 scvs031.test.com 6021
acs004 scvs030.test.com 6021
But, I don't know how to check whether AccessGate is connected to Access Server surely. Because I have Add a New Access Gate following the Oracle Access Manager Access Administration Guide. but it still connect AccessGate unsuccessfully.
Thanks,
Jowvid
Edited by: user12009746 on 2010-5-24 下午10:31

LMS 4.2.2 - Inventory fails when hardwareplatform is changed ?

Hi,
You all know the senario; A managed device, let's say a c2801 router is being replaced with newer platform, let's say a c3900e series router.
Might aswell be a C2960 being replace by a c3750x
I the goodolddays, with LMS3.2.1, you would get the "conflicting device" notice that the SNMP OID has changed on this managed device. you then need to press update and the device would then be managed once more.
How is tyhis done in LMS 4.2.2 ?
I seem to see more and more device in one of my installation, that DCR sees teh new OID and updates, but Inventory fails ...
I get more of this, and the error is just; Internalt error in the job-browser ...
I see Device Center info is wrong, but DCR info is right ...
What to do, and how do LMS handle this ?
Can I get notice around when a device has been changed ?
regards
Martin

Dear Vinod,
Thank you so mush for your answers - I was starting to wonder If I am the only one seeing this ...
But I think not - I checked closely one of my other clients installations, and this infact does the same !
DCR Info is ok, but DeviceCenter info is wrong, and from the old device - also Inventorycollect fails.
I might have been unclear in my posts, but the JobBrowser say this after InvCol fails:
"RICS0001:Internal Error,unable to process the collected data from the device."
(I think many will find this issue if they look hard)
Also please finde the attached screenshot, after device search in upper right corner, hover mouse over crosshairs, to see the wrongly info ! (I have blurred client info)
(Please note that I see the exact same in more than one PrimeLMS4.2.2 installation)
I sure will try the Unmanage/Managed trick, but I really need to see this more clearly with in the LMS.
The Alias device I am aware of, but that is just not the same as the older "conflicting" device in LMS3.2.1
So were is Conflicting devices ?? The doc's say its gone in LMS4.2, but what has replaced that info ?
I kindda disagree your point of view in regards to old data. many clients need to have history tracking like features within the networks device, so just deleting device is not alway an option. So it does make sense to keep config arcihve etc in some cases.

Problem LMS 3.1 Upgrade Inventory

I am having a problem with a computer to update the inventory, the equipment is added but can not collect the information, and try deleting it and making it to add and you do a server restart is the only team that I have problems.
three devices are found in the stack model is WS-C3750G-48PS-S.
I can give suggestions to try.
Greetings.

Invenotry Purely depends on SNMP. Make sure you device is SNMP reachable from ciscoworks server (Check snmpwalk from device center) and make sure the LMS has right set of SNMP credentials for device (check Credential Verification Job).
Post the failure Reason/screenshot and NMSROOT/log/IC_server.log.
Also, i would recommend to upgrade your server as LMS 3.1 is pretty older and you can upgrade to LMS 3.2 for free.
-Thanks
Vinod Arya

LMS 4.0.1 - Inventory problem with 6500 VSS

Hello,
I have just made a fresh install of LMS 4.0. I installed the 4.0.1 version too. It is done on a Windows 2008 STD running a WM environment.
I have only one problem : I cannot get the inventory collection for a 6500 VSS chassis. It is discovered, I got the archive configuration, it is visible on the data topology and on CiscoView but when I try to collect it for the inventory I got the following message :
R2-C6509-01
Device Collection Failed.
Someone has an idea?
Thanks by advance,
Regards,
Abel JULIAN,
Nextiraone France.

Login to LMS, then point your browser to
http://SERVERIP:1741/rme/devices.do
select your device and click "Edit Device Attributes", then click "Inlide Edit" and adjust the SNMP timeout settings for this device; in a first step change it to 10 (default is 2); Save the settings by clicking "Modify" and on the next screen "Apply".
Retry Inventory Collection and see if it will be successful now.

LMS and Web interface

Have LMS 4.0 a web interface for remoute control?

Yes,
LMS do have web interface (GUI) that wil allow you do different task like backing up the configuration of the devices, upgrading IOS, monitioring device proactively, viewing topology of your network, possible almost everything that do exist in the domain of Network management.
To know more about it, kindly visit the below URL :-
www.cisco.com\go\lms
Hope it helps,
Many Thanks,
Gaganjeet

LMS 4.x Interface Availability

I have an issue where I want to remove an interface from a device on the network, but I can't get LMS to not show it as down on the monitoring dashboard under Interface Availability. I've removed the IP from the interface and put it in admin shutdown, but it continues to show up as down in the Interface Availability chart. I also tried setting it to false under DFM for monitoring, but that didn't work. What is the correct way to remove an interface that shows down under Interface Availability that isn't actually down due to an error? It has been days since I shut down the interface.
Thank you,
Mark

Marvin,
Thanks for the reply. So you are saying that setting the interface to false in DFM removes it from the Interface Availability report on the Monitor Dashboard for you? That would make since to me, but it is still there. I did remove and re-add a device the last time I saw this issue, but thought there has to be a better way. When setting to false under DFM didn't work, I thought maybe that was just for alert generation and not the Interface Availability dashboard widget. I hate having to reboot servers. It seems this one has to be rebooted too often to fix minor issues like this.
Thank you,
Mark

SAP Learning solution and SABA LMS Centra Integration/Interface

Hi Everyone,
I am busy with a SAP Learning Solution implementation and I have a requirement to integrate with Centra which is SABA LMS virtual classroom software. Does anyone know where I can get documentation on how to do this, how long it takes and what skills are needed to do it?
Thanks.

Hi there,
I am not aware of any customer who has integrated SABA Centra with SAP Learning Solution. However there are several implementations of SAP Learning Solution integrated with Adobe Connect. Studying the documentation of this integration and talking to the consultants who have done such implementation might give you an idea of the skills required and the time taken. A good amount of documentation is available from the [book on SAP Enterprise Learning|http://www.sap-press.com/products/SAP-Enterprise-Learning.html] You may want to talk to the product owner Srinivasa Raghavachar to get his thoughts and additional documentation.
If possible ask your customer if they are willing to consider using Adobe Connect, which is part of SAP Enterprise Learning.
Edited by: Prashanth Padmanabhan on Sep 25, 2011 11:27 PM
Edited by: Prashanth Padmanabhan on Sep 25, 2011 11:27 PM

Lms 4.2 interface down alert

Hi
I receive email when an interface comes down but because i have a lot of routers with a lot of interfaces i can' tell which one came down , is there any way to include the description under the interface in the email ?
Also can i monitor the existence/not of specific route in the routing table and receive email ?
I appreciate any reply
Sent from Cisco Technical Support iPhone App

yes ,i receive the same alert but the case i have like 60 routers and lots of interfaces on every router so interfacse s0/0/0.1 is meaningless for me so i need the alert includes the description configured under the interfaces via CLI
Thanks for your reply
Sent from Cisco Technical Support iPhone App

Nexus5010 Chassis Interface Inventory and typ of module

Hi Support,
All other cisco Switch models sh inventory commands will show the sl number and type of the module inserted on the switch ports any such commands available on Nexus5010 switch to know the sl number and media type .
OS Version :version 4.0(1a)N1(1)
Regards
Vineeth Mohan

Hi Abhinav ,
I have tried that frist but it was not helpful for me . Sh module is only giving the below out put .
Kindly share if you have any feedback .
Rgeards
Vineeth

LMS 3.2 Inventory collection - Job timeouts after ~5h, all devices "Not attempted"

Hello All,
We have a strange problem with LMS 3.2 regarding Inventory Collection.
This problem started immediatelly after the LMS installation/upgrade (LMS 3.2 was installed on a new server, and LMS 2.6 database migrated to it).
All Jobs finish as failed, with all devices "not attempted".
Job hangs for a five and a half hours and then reports failed status.
The symptoms are the same for scheduled jobs and manually created jobs.
I also have opened a TAC case, but it seems that nothing relevant can be found in the IC_Server.log.
Also, according to a packet capture, it seems that LMS does collect SNMP data from devices after a job is started...
We tried to upgrade RME 4.3.0 to 4.3.1.
One Job immediately after the upgrade was succesful (Inventory was collected for manually selected device), but the next day all Inventory Jobs were failing again with the same symptoms...
Does anyone have a sugestion where to look for a problem trace?
Thanks in advance!
Ragards,
Jasmina

Hi Jasmina ,
Please chech the Existing MDF pacakge :
go to common service > software center > device update >>> check the checkbox for Cisco works common service and click on check for updates
--if there is an Update , please upgarde the MDF version..
--Similarly look for any Available Device Pacakges update for RME , if there are Upgarde all the Device Pacakages ....
--After all of the above Task is done , Now re-run the Job and it still fails then share the IC_server.log again..
Thanks--
Afroj

Automatic TO Creation for Inventory loading

Hi ,
Is there any way to create Transfer Order for a material document with 561 movement type (With and without Handling Units ) ?
I believe system doesn't create any TR for intial inventory upload , is that also correct ?
Regards
Sandeep

Dear Sandeep,
You can configure to create the transfer requirement or transfer order creation for 561 movments also. under
customizing path: SPRO --> Logistics Execution --> Warehouse management --> Interfaces --> Inventory Management --> Define Movement Types
In case you want to do with HU management then there will be delivery gets created instead of material document.
so naturally you can putaway or pick using the delivery document.
Kind regards,
Ramana

Cisco LMS 4.2.3 - Nexus VDC - SNMP

Hi All,
I am having some trouble with getting inventory collection work for the VDC's of a Nexus 7k from LMS 4.2.3.
The collection works for the main VDC, just not any of the others.
I have verified (using SNMPWALK) from the LMS server that the snmp credentials in use on the LMS for these VDC's is correct.
We are using SNMP V3.
The error I am getting when trying to run an inventory collection is:
Device Collection Failed. Failed to fetch Containment details.
Does anyone have any experience with getting VDC's to work in LMS and may have seen this error before?
Thanks in advance.

Hi ,
You are hitting the below BUG:
LMS 4.2.3 Inventory collection is failing for some of Nexus 7k devices
CSCuh49814
Development team is still working on the fix.
Thanks-
Afroz
[Do rate the useful post]

Lms 3.1 Device Collection Failure for Cat 6506-E

Unable to pull an updated device collection for a Cat6506-E running 12.2(33)SXI3. Was able to pull one when the device was running 12.2(33)SXH3, but not now. Anyone aware of a bug with the 12.2(33)SXI3 code? All other devices function correctly so I'm guessing an IOS bug, although I got tired of searching for it. Thanks in advance, Ernie

I've just upgraded to LMS 3.2, and LMS still can't inventory my two 6506-E.
I've run an "SNMP Walk" against one device, and it seems to work : here's the first few lines of it :
The following is a SNMP walk of device 10.x.x.x starting from
SNMP Walk Output
RFC1213-MIB::sysDescr.0 = STRING: "Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-VM), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Tue 01-Sep-09 22:55 by prod_re"
RFC1213-MIB::sysObjectID.0 = OID: CISCO-PRODUCTS-MIB::cat6506
EXPRESSION-MIB::sysUpTimeInstance = Timeticks: (803850159) 93 days, 0:55:01.59
And I checked the IC_Server.log... this time it mentions SNMP timeout... I tried bumping the timeout to 20 seconds with 2 retries in Campus Manager.
I've attached my IC_Server.log excerpt.
Thanks for the help!
Alex.

LMS 3.2 Interface Inventory

Similar Messages

Maybe you are looking for