LMS 3.2 Notification problem

Hi,
we have some routers with poor bandwith, and lot of HighUtilizaton SYSLOG messages.
I create new event set for them in DFM, I unchecked the HighUtilizaton message, but I still got the HighUtilization messages.
What could be the problem? Thanks for your help.

Post a sample of the messages you are recieving.

Similar Messages

LMS E-Mail Notifications Errors Defination

Dears,
LMS send email notification to the customer (critical) as i customized
with error (authentication failure)
is there any sheet to know or identify what each error means ?
as i googled it and didnt find a solution
Thanks in advance

You can check following document which describes what alerts mean, which are raised by LMS:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/user/guide/lms_monitor/Events.html#wp1078033
Also, LMS listens to some specific traps sent from device and process them to send some alerts.
For some SNMP traps, LMS either processes them or treats them as pass-through traps. These traps, and how LMS treats them, are described in these topics:
Processed SNMP Traps
When LMS receives certain SNMP traps, it analyzes the data found in the following fields of each SNMP trap message, and changes the property value of the object property if required:
•Enterprise (the sysObjectID of the agent or object)
•Generic Trap Identifier
•Specific Trap Identifier
•Variable-Bindings
•IP address of the SNMP agent
Pass-Through SNMP Unidentified Traps
Pass-through traps are the traps that are generated from devices and are not processed by LMS. The traps appear in the alerts and activities page, if they are generated from the devices that are managed by LMS. LMS cannot process these traps and map them to a topology element such as cards and interfaces. However, LMS can forward the traps irrespective of the device state is either managed or unmanaged. Forwarding these traps is controlled using Monitor > Fault Settings > SNMP Traps > Forwarding.
Pass-through traps are displayed as follows:
•As one of the following events:
–InformAlarm
–MinorAlarm
–MajorAlarm
•With the device type and the device name from which it was generated
Unidentified Traps
LMS may display an event as an Unidentified Trap. Normally an Unidentified Trap is reported when an event occurs on a device that is being discovered by LMS. To get more information on an Unidentified Trap see the corresponding Events page.
For more details check :
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/user/guide/lms_monitor/TrapFwd.html#wp1007519
-Thanks
Vinod

I reset my iPhone 4 Network settings to fix the push notification problem, but I lost my internet connection. How do I fix it?

I tried to solve the "connect to iTunes to receive push notifications"-problem by resetting my network settings, but it only caused me to lose my internet connection when using 3G. Now I can't do anything with this stupid phone. How do I fix it? I don't want to reset anything anymore, I'm sick of this new iOs update, it seriously messed up my phone and I can't do anything properly anymore. Any help?
And btw, I would also like to get the push notifications back on. Connecting to iTunes did absolutely nothing. Resetting the network settings only made my situation worse. Help please!

Hi there Julia,
Ahh The iPhone isn't "stupid" it's been called "stupid" because you are frustrated at the situation , but try
Load iTunes. Backup your phone. Make sure it is backed up !! Run restore. This will get rid of the error! And please what ever you do , do not skip the back up!
Thanks,

LMS 3.2 DFM email notification problem

Hi,
I got a problem in a newly installed LMS 3.2 with the DFM email notification.
I can see the alerts appering on Alerts&Activities, but DFM would not send any emails.
I can get emails from other moduls of LMS. CS sends me emails from successfully backups.
The SNMP Server works fine. The settings are ok.
I already reinstalled DFM.
I have seen a thread exists on supportforum.cisco.com with the same problem.
(https://supportforums.cisco.com/message/3033101#3033101)
Maybe anyone have the answer to this problem.
Thanks,
C8-Netzwerk

This looks like an issue I am currently tracking. I have written a patch which should correct this. You can get the patch by opening a TAC service request, and having your engineer contact me directly.
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com

ICal Notifications (problems)

I'm having a heck of an introduction into the world if notifications, and I can honestly say, I'm frustrated, so I apologize if this comes off sounding short.
I received an important notification from a business partner of mine with all of the details of the meeting enclosed in an iCal Invitation attached to an email from them. The attachment seemed fine, the icon displayed inline with the attached message. (using Mail.app). I clicked on it, and was taken to iCal.
The notification appeared in the notification box in iCal.
Clicking on the invite, iCal spat back the error: "Someone invited you to an event using an email address that isn’t on your “me” card in Address Book. Find your email address in the following list and add it to your card in Address Book."
Unfortunately there is no email address listed for me to add to my Me card. I've looked all over the web, and no one seems to have a fix.
1. Tried recreating card in Address book and re-associating it to me
2. Tried making a card with JUST the email address the invite was sent to
3. Searched the web and found a few references on how frustrating it is, no answers
4. Submitted a bug report to Apple (4/29/07)
Any help would be most appreciated.

I have this exact same problem, and I cannot figure out what to do. My "me" address card now includes 3 versions of the e-mail address receiving he invitation:
[email protected]
<[email protected]>
My Name <[email protected]>
iCal still will not recognize it, and will not accept the invitation.
What can I do?

Extended notifications problem

Hi experts,
I am trying to configure extended notifications for around 7 to 8 different taks
pertaining to different workflows.
I could successfully do it for 1 task.
Then after successful testing I did add more filters to the same configuration
under same subscription and delivery.
I even created new schedules for the new filters. But unfortunately it is not working.
I could debug the standard program SWN_SELSEN and found that the particular WAPI call to
select the delta Work Items from SWWWIHEAD and SWWWIHIST is failing because of some
timestamp mismatch.
Can you please provide me some help regarding this ?
Thanks,
Deb

Hi Purvesh,
You can find the step by step procdure in the following blog.
How to get Work items @ your Outlook Inbox
You can find all the definitions and theories in the SAP Help link provided in the same blog.
I initially followed the above and could successfully do it for 1 task.
However, I was stuck in achieving the same for multiple task belonging to different workflows.
Here is how I did it:
1) Do the configuration in SWNCONFIG as per the blog and SAP Help
     A) Create your own delivery schdule
     B) Create your own subscription using the above delivery schedule
     C) Create your own filters
     D) Create your own selection schedule
2) Then run the report SWN_SELSEN to do the actual selection and delivery based on the schedules    you created.
The key is creating the filters. Follow the SAP Help link closely and try it. If you face any problems
the please let me know.
Please award appropriate points.
Thanks & Regards
Deb
Edited by: debabrata mohanty on Dec 10, 2008 11:26 AM

Speaker and notification problem on my iPod touch...?

Earlier today, I was listening to music on my ipod when it suddenly turned off. This confused me, so I just turned it back on- the only problem is that it didnt work. I pressed the play button, and it showed the song was playing, but it wasnt. I did not have headphones in. After a few minutes of trying, I just tried to turn it up, resulting in the discovery that my volume buttons were not working, and on my music app the music bar didnt show up. Also, after this happened, I realized that when my ipod was locked- I was no longer getting my notifications alerting me. The ipod music works fine with headphones plugged in, and now the volume buttons are working but the only time sound comes out is from the settings volume when I tested it.
I have already reset my ipod, both ways. I reset it just by pressing the home and power button and then reset it by resetting all settings. I really need help, I don't know what's going on with it.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Workflow Notification problem

Hello,
I have a problem with WorkFlow Notification.
When a send a workflow test notification. I reveive the mail, in my inbox. I use Webaccess. The notification server works. But in the body of the mail, i don't have the Acknowledge button, I have only &MAILTO....
I have three tiers for OCS 10.1.2.3 and the OID is separate of the Store database. I have run the Worflow Assistant configuration on my middeltier, and I have change the password on OID for the user owf_mgr to be the seem that in the store database.
I have a single box installation and is work proprely...
Can I help me ?
Message was edited by:
user473198
The middle tier has been Migrate to a v2 installe (9i) to a 10.1.2.0 ... and the schema of OWF_MGR cannot be removed... it's the problem ?

Hello Deepika,
I don't know, how to integrate the
<a href="http://...">URL-description</a>
into the notification, but when using plain text, most of the email clients suppress the line-breaks when the URL is fit in-between of < and >
<http://www.long-url-here-with-a-line-break-in-the
middle-of-nowhere.com>
Maybe this gives you a quicker help.
Best wishes,
Florin

Nokia lumia 520 push notification problem with wha...

I have a Lumia 520, and i find that i do not receive push notifications for my whatsapp messages. I have to open the application before the messages come through. I would like to know how to correct this. I have checked all my settings.

On a HTC-forum I saw the next solution, and it works also for Nokia Lumia! That means it is a Microsoft Issue!
1) Unpin Windows store from start
2) ERASE Internet Explorer History
3) ADD new language to the keyboard (Settings-->keyboard-->add keyboards
(CHOOSE A LANGUAGE THAT REQUIRE DOWNLOAD)
4) When downloading is finished, it will ask to restart and install
5) After installation and restart do the following;
A) UNINSTALL WHATSAPP
B) REINSTALL WHATSAPP (you can get conversation history back when asked, so no problem)
After this the push function works, but there is still a delay up to 10 minutes! So when you test, be patient.
NO BETTER PRESSURE MEDIUM THAN ANTI ADVERTISING SO AFTER THIS EXPEDITION PLEASE CHANGE YOUR STATUS TEXT TO:
USING WINDOWS; THAT MEANS DELAY UP TO 10 MINUTES
When all Window Phone users display that message, Microsoft has to come with a final solution!
Please spread the word

Community boards notification problem.

Didn't quite know where to post this, hope here is okay!
Although I have all the various options for notifications by email selected in the board preferences, I am not getting any sent through, the email address is correct. Any one else having this problem and/or know how to rectify the problem?
Cheers.

Thank you, Andrew.
I have reported the matter to the hosts. As you will understand, they operate in their own way and we cannot guarantee they will reply. But my experience is they are very helpful and usually resolve matters like this.

Web Expense Notification problem in 11.5.7

Hi all,
When we create an Internet Expense with 40 lines the notification does not reach the manager for approval but it can be approved from Workflow Administrator responsibility.
The problem does not occur for Expenses upto 30 lines.
We are doing this on 11.5.7.
Your valuable suggestions are appreciated.
Regards,
Avi

This may seem a bit silly but could you install a 10g/11g database somewhere and then create a plsql package/function on the new rdbms to call the webservice? Then access the function via a dblink? I haven't done it with webservices but we do access plsql programs over dblinks all the time (we usually do keep them at the same rdbms version though).
Edited by: mcharchu on Jan 8, 2009 8:56 AM

Email notification problems

Used to be the email notification appeared in my outlook in box and then disappeared when the message was delivered. Now it just stays there and also appears in my 8830. How can I fix this problems? Thanks.

This is the notification that is also appearing in the blackberry:
-----Original Message-----
From: [email protected]
[mailto:[email protected]]
Sent: Saturday, August 02, 2008 07:05
To: Dale Brown
Subject: [NEWSENDER] - RIM_bca28a80-e9c0-11d1-87fe-00600811c6a2 -
Message is from an unknown sender
This message is used to carry data between the BlackBerry handheld and
an associated server. Please do not delete, move or respond to this
message - it will be processed by the server.
BEGINETP 10
A4kFAAAAAAAAAQ!!
ENDETP 505820133

Notification Problem on: Calendar Server 6.0 and IMServer 6.1

Hello everybody,
I have a very confusing problem with the Instant Messenger notification feauture for the Sun ONE Calendar server. I have set up both servers and the jms can communicate with ens and the other way round. But if a event occours I get the following Message in the /var/opt/SUNWiim/default/log/server.log file:
[19/Mar/2004:15:35:00 +0100] WARNING: CalendarReminder: User [email protected] Does not exist. (xxx is username and domainname)
But now its getting confusing, if I send myself an Alert message over the IMS client applet I can see the following Message:
[19/Mar/2004:17:53:00 +0100] DEBUG: [Realm] getUser: [email protected]
[19/Mar/2004:17:53:00 +0100] DEBUG: [Realm] found user in cache: [email protected]
[19/Mar/2004:17:53:00 +0100] DEBUG: Sending Alert/Invite
Any ideas what I could have done wrong?
Many thanks in advance
Stefan Peinkofer

I have the same problem... any forward in Struts after a call to WebLogic 8 session EJB will give me the same AccessControlException in HttpRequestFacade.getHttpRequestBase.
It seems that after WebLogic EJBs is called, the security policy gets all mixed up. You can fix this by granting in code the correct policy just before the forward... but this is a workaround not a fix (and a potential security hole).
            Policy.setPolicy(
                new Policy() {
                    public PermissionCollection getPermissions(CodeSource cs) {
                        Permissions perms = new Permissions();
                        perms.add(new AllPermission());
                        return(perms);
                    public void refresh() {
            return actionMapping.findForward("success");

Notifications problem in Mountain Lion

I have Calendar notifications set to Alerts. When I receive several Alerts at once, then try to close one, I am locked out of notifications, and attempts to close the Alerts produces only the dreaded spinning beach ball. I suspect some kind of third party software conflict, but don't know what it might be.
At present the only remedy seems to be to restart the iMac (mid 2011) Logging out and back in does not resolve the issue. I am going to try changing the Calendar notification from Alerts to Banners and see if that works better.
Has anyone else had this problem or found a solution? Any help would be appreciated.
Thanks,
Keith

I have exactly the same problem waking up my mid-2011 MBA (updated from factory Lion to OS X 10.8.2): multiple calendar alerts will appear together with alert e-mails from Yahoo account. Clearing the alerts or deleting the alert e-mails will lead to spinning beach ball. Remaining alerts at Notification Center cannot be cleared.
The only alternative to shut down or restart the OS is to launch Activity Monitor via Spotlight, from filter search for and select Notification Center, click Quit Process and confirm Quit. Spinning beach ball and orphan alerts will disappear. Notification Center will remain working. Extremely annoying but beats having to reboot.
Cheer!

LMS 3.2 discovery problem

Hi
I am doing a POC at one of the customer location for LMS 3.2
Now the problem i am fcaing is that when i have enabled the discovery based on CDP i am only able to discover two to 3 cisoc device only.
The customer has around 75 cisco devices including routers.
Its is not able to discovers the MPLS router across WAN however it is discovering the router where peer to peer link is there.
Am i missing something
I have enabled CDP in all the devices but still it is not able to discover the devoves.
I am using the evaluation version.
Thanks

Make sure the SNMP credentials you have configured in Discovery are the correct ones, and that the LMS server is capable of polling these missing devices with SNMP. You can use a sniffer trace filtering on udp/161 traffic to see what Discovery is sending, and whether or not the devices are replying correctly.
Yes, Discovery will pick up firewalls with the ICMP module provided the firewall allows LMS to ping it, and poll it with SNMP.

LMS 3.2 Notification problem

Similar Messages

Maybe you are looking for