LMS 3.2 discovery problem
Hi
I am doing a POC at one of the customer location for LMS 3.2
Now the problem i am fcaing is that when i have enabled the discovery based on CDP i am only able to discover two to 3 cisoc device only.
The customer has around 75 cisco devices including routers.
Its is not able to discovers the MPLS router across WAN however it is discovering the router where peer to peer link is there.
Am i missing something
I have enabled CDP in all the devices but still it is not able to discover the devoves.
I am using the evaluation version.
Thanks
Make sure the SNMP credentials you have configured in Discovery are the correct ones, and that the LMS server is capable of polling these missing devices with SNMP. You can use a sniffer trace filtering on udp/161 traffic to see what Discovery is sending, and whether or not the devices are replying correctly.
Yes, Discovery will pick up firewalls with the ICMP module provided the firewall allows LMS to ping it, and poll it with SNMP.
Similar Messages
-
CiscoWorks LMS 3.2 device driver discovery problem
Hi,
We have many devices Cisco 3825 on our network. For some of them, the device driver is correctly discovered but not for others.
- Devices correctly discovered : cisco3825 : Cisco IOS Software, 3800 Software (C3825-ADVSECURITYK9-M), Version 12.4(5a), RELEASE SOFTWARE (fc3)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2006 by Cisco Systems, Inc.Compiled Fri 13-Jan-06 21:09 by alnguyen : snmp oid : .1.3.6.1.4.1.9.1.543
- Devices not recognized : cisco3825 : Cisco IOS Software, 3800 Software (C3825-ADVSECURITYK9-M), Version 12.4(15)T9, RELEASE SOFTWARE (fc5)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2009 by Cisco Systems, Inc.Compiled Tue 28-Apr-09 17:45 by prod_rel_team : snmp oid : .1.3.6.1.4.1.9.1.543
I didn't see any new device driver package on Cisco site.
Does somebody has an idea ?
Many thanks,
Fabien GIRAUDI'm not sure I clearly understand the problem. Are you saying that some 3825s are not being discovered by Common Services Discovery? If so, are they showing up as unreachable, or are they not showing up at all in the Discovery reports?
-
Discovery problem in LMS 4.0.1
Hello all,
I have a problem discovering some ASA firewalls on a network. I have several ASA firewalls on this /24 network, but some of them I can't discover e.g 149.x.x.107 is discovered ok, but 149.x.x.20 I can't discover. It seems that it's not even trying to discover the devices I have problems with. Nothing is shown in the discovery log
I hope someone can help me.
Thanks in advanceIf I ping the firewalls, then I can see all the firewalls in the ARP table, including the firewalls I can't discover.
Below is a part of the ARP table from the seed device
Internet x.x.x..21 172 7081.05d3.91ea ARPA Ethernet0/0 (can't disover)
Internet x.x.x..20 17 7081.05d3.a158 ARPA Ethernet0/0 (can't disover)
Internet x.x.x.13 12 001a.6dea.51cb ARPA Ethernet0/0 (can't discover)
Internet x.x.x.14 12 30e4.db7b.7021 ARPA Ethernet0/0 (can't discover)
Internet x.x.x.19 0 68ef.bdb1.6227 ARPA Ethernet0/0
Internet x.x.x.18 0 5475.d0c3.9827 ARPA Ethernet0/0
Internet x.x.x.7 0 001e.f762.d405 ARPA Ethernet0/0
Internet x.x.x.8 0 001e.f762.d3e1 ARPA Ethernet0/0
Internet x.x.x..33 0 0012.d94f.c1b4 ARPA Ethernet0/0
Internet x.x.x..34 0 0012.0182.d82e ARPA Ethernet0/0
Internet x.x.x.107 0 0015.c695.b879 ARPA Ethernet0/0
Internet x.x.x.108 2 0015.fac8.15b3 ARPA Ethernet0/0 -
LMS 3.2 discovery process runs for ever
Dear friends,
I am having a problem with discovery on Ciscoworks LMS 3.2. The discovery process runs eternally and does not discover any devices.
Here are the individual device versions:
Name Version Size Status Expiration Date
1. CM 5.2 300 Purchased Never
2. DFM 3.2 300 Purchased Never
3. HUM 1.0 100 Evaluation Sun Jul 26 12:18:01 GMT+03:00 2009
4. IPM 4.2 300 Purchased Never
5. RME 4.3 300 Purchased Never
6. VNM 1.0 Unlimited Purchased Never
Please find enclosed the csdiscovery.log which indicates the following error
1000 [main] DEBUG com.cisco.nm.csdiscovery.CSDiscoveryManager - FATAL: Exception occured in the start discovery Exception occured during start of discovery in CS.
Reason : failed to initialize DiscoveryController
I am also enclosing the CSDiscovery-config.xml under the config directory and the specific job as well.
ngdiscovery.log shows 0 bytes. I am not sure if it is to be populated only when we initiate some debugging?
Thanks a lot
GautamIt seems you're missing some critical files. Under NMSROOT/conf/csdiscovery, you should have the following zip files:
SharedDiscoveryAUS.zipSharedDiscoveryCluster.zipSharedDiscoveryGeneral.zipSharedDiscoveryIGX.zip
The casusers group should have full control on all four files. If these files really are missing, you will need to contact TAC to get new ones, or you will need to reinstall Common Services. -
Hi,
I am having problem starting device discovery in Campus Manager. After looking at a couple of different things, noticed that DeviceDiscovery is in TRANSIENT TERMINATED ProcessState.
I attached device discovery properties file. Please anyone check and help me to find the issue. Thanks.
Best Regards
S.RajkumarTransient terminated is a normal state for DeviceDiscovery. See my LMS daemon cheat sheet at https://supportforums.cisco.com/docs/DOC-8798 for more details. When Discovery stops, the daemon will terminate.
-
LMS 4.2 | discovery based on specific IP Adress
Hi Netpro
1)is there any methods to let LMS 4.2 discover Cisco devices based on specific ip like Loopback address ? coz in my Cisco devices i have more than ip address configured , please advice?
thanks
ibrahim1. Please refer to the context-sensitive help when you get to this step. It will give you a page with very detailed file formats and fields that are used (see screenshot below from my lab server). That page is also in Chapter 4 of the Inventory Management guide online.
2. Device adjacencies are determined via a correlation of various MIB variables including CDP neighbor details and other details. I recommend you read through Joe Clarke's document on understanding LMS discovery.
One thing to note is that is is best to have the IP addresses of the devices in DNS. If that is difficult for whatever reason, the first create a local hosts file with the devices. You will get better results if the device IPs resolve to host names. -
LMS 4.2 discovery does not resolve hostname
Hi,
I'm trying automatic discovery with Ping on sweep module. I'm using the following configuration (you can also see it in the attached file):
discovery module - ping on sweep
global seed device - 192.168.6.35
preferred DCR display name - DNS resolvable hostname
The LMS server has its hostfile populated with the device ip/hostname that i'm testing with and resolving from the server works in both directions. Nevertheless, after discovery proccess is finished, the device is added in DCR with its IP address as dispaly name (screenshot in the attached file).
I've tried the same method in CiscoWorks 4.0.1 and it works fine.
I'm attaching the debug log files from discovery test. The LMS is running on Windows Server 2008 standard
Please advice,Hi,
I'm trying automatic discovery with Ping on sweep module. I'm using the following configuration (you can also see it in the attached file):
discovery module - ping on sweep
global seed device - 192.168.6.35
preferred DCR display name - DNS resolvable hostname
The LMS server has its hostfile populated with the device ip/hostname that i'm testing with and resolving from the server works in both directions. Nevertheless, after discovery proccess is finished, the device is added in DCR with its IP address as dispaly name (screenshot in the attached file).
I've tried the same method in CiscoWorks 4.0.1 and it works fine.
I'm attaching the debug log files from discovery test. The LMS is running on Windows Server 2008 standard
Please advice, -
Hi
I have Cisco LMS 4.2 installed i was using SNMP V2c for polling my devices. After i turned on SNMPv3 all devices are reachable and even when i make credentials check it's ok, but the issue when i access any device from search pane it shows me in the collector status " Discovery failure"
Steps i made to troubleshoot but not succeeded :
1. Rediscover Devices
2. Modify SNMP timeout & retry settings
Devices: Catalyst 2960 , Catalyst 3560
I've attached a snapshot of collector error
Please help
Thanks1. Please refer to the context-sensitive help when you get to this step. It will give you a page with very detailed file formats and fields that are used (see screenshot below from my lab server). That page is also in Chapter 4 of the Inventory Management guide online.
2. Device adjacencies are determined via a correlation of various MIB variables including CDP neighbor details and other details. I recommend you read through Joe Clarke's document on understanding LMS discovery.
One thing to note is that is is best to have the IP addresses of the devices in DNS. If that is difficult for whatever reason, the first create a local hosts file with the devices. You will get better results if the device IPs resolve to host names. -
Hi,
I have successfully connected my WLC 2500 controller with 20 light weight Access points 1262N.
I have used the internal DHCP server option in the controller for the AP's and client.
Port 1 of the WLC is trunked with the switch 2960. All is working fine
The problem comes when I remove the Ethernet cable from the management interface and restart the WLC. The AP's don't come back. If I don't restart the WLC the AP's remain.
On the other hand, when I leave the Ethernet cable connected to the management port with my pc and then reboot the WLC, the AP's appear.
Seems like whenever im not physically connected to the management port of the WLC and restart it, the AP's don't come back. The only way to make them come back again is to connect my PC to the management port.
Please help me. What seems to be the problem here ?
Best Regards,Hi,
All 20 Pc;s are in one area connected to the same AP im assuming. The PC;s are stationary, so didnt check for roaming, but generally my laptop connectivity is fine while roaming. It rarely disconnects but users have complained that it did disconncect a few times.
Please see below the WLC configuration:
User:Dawaa
Password:********
(Cisco Controller) >sh
(Cisco Controller) show>running-config
Notice: "show running-config" has been changed to be an alias to "show run-config".
Use "show run-config commands" to display the configuration commands.
Press Enter to continue or to abort...
System Inventory
NAME: "Chassis" , DESCR: "Cisco 2500 Series Wireless LAN Controller"
PID: AIR-CT2504-K9, VID: V01, SN: PSZ163602PD
Burned-in MAC Address............................ 20:3A:07:67:C3:00
Maximum number of APs supported.................. 15
Press Enter to continue or to abort
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.3.101.0
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 1.0.0
Firmware Version................................. PIC 16.0
Build Type....................................... DATA + WPS
System Name...................................... tEthernet0
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
IP Address....................................... 192.168.0.140
Last Reset....................................... Software reset
System Up Time................................... 0 days 1 hrs 23 mins 40 secs
System Timezone Location......................... (GMT +3:00) Baghdad
Configured Country............................... SA - Saudi Arabia
Operating Environment............................ Commercial (0 to 40 C)
--More or (q)uit current module or to abort
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +26 C
External Temperature............................. +30 C
Fan Status....................................... 4200 rpm
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 1
Number of Active Clients......................... 10
Burned-in MAC Address............................ 20:3A:07:67:C3:00
Maximum number of APs supported.................. 15
Press Enter to continue or to abort
AP Bundle Information
Primary AP Image Size
ap1g2 10596
ap3g1 11088
ap3g2 10968
ap801 7092
ap802 8428
c1130 5072
c1140 9288
c1250 6784
c1520 7852
c602i 3736
Secondary AP Image Size
ap1g2 10596
ap3g1 11088
ap3g2 10968
ap801 7092
ap802 8428
--More or (q)uit current module or to abort
c1130 5072
c1140 9288
c1250 6784
c1520 7852
c602i 3736
Press Enter to continue or to abort
Switch Configuration
802.3x Flow Control Mode......................... Disable
FIPS prerequisite features....................... Disabled
secret obfuscation............................... Enabled
Strong Password Check Features:
case-check ...........Enabled
consecutive-check ....Enabled
default-check .......Enabled
username-check ......Enabled
Press Enter to continue or to abort
Network Information
RF-Network Name............................. Dawaa
Web Mode.................................... Enable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Disable
Secure Web Mode RC4 Cipher Preference....... Disable
OCSP........................................ Disabled
OCSP responder URL..........................
Secure Shell (ssh).......................... Enable
Telnet...................................... Enable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Multicast Address : 239.60.60.60
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds
MLD snooping................................ Disabled
MLD timeout................................. 60 seconds
MLD query interval.......................... 20 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
--More or (q)uit current module or to abort
Cisco AP Default Master..................... Enabled
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Enable
Mgmt Via Dynamic Interface.................. Enable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Web Auth Proxy Redirect ................... Disable
Web Auth Captive-Bypass .................. Disable
Web Auth Secure Web ....................... Enable
Fast SSID Change ........................... Disabled
AP Discovery - NAT IP Only ................. Enabled
IP/MAC Addr Binding Check .................. Enabled
CCX-lite status ............................ Disable
oeap-600 dual-rlan-ports ................... Disable
oeap-600 local-network ..................... Enable
Press Enter to continue or to abort
Port Summary
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE
1 Normal Forw Enable Auto 1000 Full Up Enable N/A
2 Normal Disa Enable Auto Auto Down Enable N/A
3 Normal Disa Enable Auto Auto Down Enable Enable (Power Off)
4 Normal Disa Enable Auto Auto Down Enable Enable (Power Off)
Press Enter to continue or to abort
AP Summary
Number of APs.................................... 14
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
AP6c20.56a0.b352 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:52 default location 1 SA 1
AP6c20.5666.e34a 2 AIR-LAP1262N-E-K9 6c:20:56:66:e3:4a default location 1 SA 1
AP6c20.56a0.b341 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:41 default location 1 SA 1
AP6c20.56a0.b4db_(Expiry) 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b4:db Expiry Warehouse 1 SA 1
AP6c20.569a.59da 2 AIR-LAP1262N-E-K9 6c:20:56:9a:59:da default location 1 SA 1
AP6c20.5666.e2db 2 AIR-LAP1262N-E-K9 6c:20:56:66:e2:db default location 1 SA 1
AP6c20.568c.d530_(Expiry) 2 AIR-LAP1262N-E-K9 6c:20:56:8c:d5:30 default location 1 SA 1
AP6c20.5666.e2ca 2 AIR-LAP1262N-E-K9 6c:20:56:66:e2:ca default location 1 SA 1
AP6c20.5666.e354 2 AIR-LAP1262N-E-K9 6c:20:56:66:e3:54 default location 1 SA 1
AP6c20.569a.59fd 2 AIR-LAP1262N-E-K9 6c:20:56:9a:59:fd default location 1 SA 1
AP6c20.56a0.b346 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:46 default location 1 SA 1
AP6c20.56a0.b2f0 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b2:f0 default location 1 SA 1
AP6c20.568c.d1ec 2 AIR-LAP1262N-E-K9 6c:20:56:8c:d1:ec default location 1 SA 1
AP6c20.56a0.b425 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b4:25 default location 1 SA 1
--More or (q)uit current module or to abort
AP Tcp-Mss-Adjust Info
AP Name TCP State MSS Size
AP6c20.56a0.b352 disabled -
AP6c20.5666.e34a disabled -
AP6c20.56a0.b341 disabled -
AP6c20.56a0.b4db_(Expiry) disabled -
AP6c20.569a.59da disabled -
AP6c20.5666.e2db disabled -
AP6c20.568c.d530_(Expiry) disabled -
AP6c20.5666.e2ca disabled -
AP6c20.5666.e354 disabled -
AP6c20.569a.59fd disabled -
AP6c20.56a0.b346 disabled -
AP6c20.56a0.b2f0 disabled -
AP6c20.568c.d1ec disabled -
AP6c20.56a0.b425 disabled -
Press Enter to continue or to abort
AP Location
Total Number of AP Groups........................ 0
Site Name........................................ default-group
Site Description.................................
AP Operating Class............................... Not-configured
RF Profile
2.4 GHz band.....................................
5 GHz band.......................................
WLAN ID Interface Network Admission Control Radio Policy
1 management Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
AP6c20.56a0.b352 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:52 default location 1 SA 1
AP6c20.5666.e34a 2 AIR-LAP1262N-E-K9 6c:20:56:66:e3:4a default location 1 SA 1
AP6c20.56a0.b341 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:41 default location 1 SA 1
AP6c20.56a0.b4db_(Expiry) 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b4:db Expiry Warehouse 1 SA 1
--More or (q)uit current module or to abort
AP6c20.569a.59da 2 AIR-LAP1262N-E-K9 6c:20:56:9a:59:da default location 1 SA 1
AP6c20.5666.e2db 2 AIR-LAP1262N-E-K9 6c:20:56:66:e2:db default location 1 SA 1
AP6c20.568c.d530_(Expiry) 2 AIR-LAP1262N-E-K9 6c:20:56:8c:d5:30 default location 1 SA 1
AP6c20.5666.e2ca 2 AIR-LAP1262N-E-K9 6c:20:56:66:e2:ca default location 1 SA 1
AP6c20.5666.e354 2 AIR-LAP1262N-E-K9 6c:20:56:66:e3:54 default location 1 SA 1
AP6c20.569a.59fd 2 AIR-LAP1262N-E-K9 6c:20:56:9a:59:fd default location 1 SA 1
AP6c20.56a0.b346 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:46 default location 1 SA 1
AP6c20.56a0.b2f0 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b2:f0 default location 1 SA 1
AP6c20.568c.d1ec 2 AIR-LAP1262N-E-K9 6c:20:56:8c:d1:ec default location 1 SA 1
AP6c20.56a0.b425 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b4:25 default location 1 SA 1
Press Enter to continue or to abort
RF Profile
Number of RF Profiles............................ 0
Out Of Box State................................. Disabled
RF Profile Name Band Description Applied
Press Enter to continue or to abort
AP Config
Cisco AP Identifier.............................. 0
Cisco AP Name.................................... AP6c20.56a0.b352
Country code..................................... SA - Saudi Arabia
Regulatory Domain allowed by Country............. 802.11bg:-AE 802.11a:-E
AP Country code.................................. SA - Saudi Arabia
AP Regulatory Domain............................. -E
Switch Port Number .............................. 1
MAC Address...................................... 6c:20:56:a0:b3:52
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.0.111
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.0.220
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
--More or (q)uit current module or to abort
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.3.101.0
Boot Version ................................... 12.4.2.4
Mini IOS Version ................................ 7.3.1.73
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1262N-E-K9
AP Image......................................... C1260-K9W8-M
--More or (q)uit current module or to abort
IOS Version...................................... 15.2(2)JA$
Reset Button..................................... Enabled
AP Serial Number................................. FCZ1642Z0A6
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... CUSTOMIZED
AP User Name..................................... dawaa
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 0 days, 22 h 01 m 44 s
AP LWAPP Up Time................................. 0 days, 01 h 25 m 37 s
Join Date and Time............................... Wed Mar 13 16:10:25 2013
Join Taken Time.................................. 0 days, 00 h 02 m 19 s
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211n-2.4
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
--More or (q)uit current module or to abort
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 1c:e6:c7:04:7a:20
Operation Rate Set
1000 Kilo Bits........................... SUPPORTED
2000 Kilo Bits........................... SUPPORTED
5500 Kilo Bits........................... SUPPORTED
11000 Kilo Bits.......................... MANDATORY
MCS Set
MCS 0.................................... DISABLED
MCS 1.................................... DISABLED
MCS 2.................................... SUPPORTED
MCS 3.................................... DISABLED
MCS 4.................................... DISABLED
MCS 5.................................... DISABLED
MCS 6.................................... DISABLED
MCS 7.................................... DISABLED
MCS 8.................................... DISABLED
MCS 9.................................... DISABLED
MCS 10................................... DISABLED
--More or (q)uit current module or to abort
MCS 11................................... DISABLED
MCS 12................................... DISABLED
MCS 13................................... DISABLED
MCS 14................................... DISABLED
MCS 15................................... DISABLED
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ SA
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 13
--More or (q)uit current module or to abort
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 3
Phy DSSS parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 6
Extension Channel ......................... NONE
--More or (q)uit current module or to abort
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11,12,
......................................... 13
Current CCA Mode .......................... 0
ED Threshold .............................. -50
Legacy Tx Beamforming Configuration ....... CUSTOMIZED
Legacy Tx Beamforming ..................... ENABLED
Antenna Type............................... EXTERNAL_ANTENNA
External Antenna Gain (in .5 dBi units).... 0
Diversity.................................. DIVERSITY_ENABLED
802.11n Antennas
A....................................... ENABLED
B....................................... ENABLED
C....................................... ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
--More or (q)uit current module or to abort
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Radio Extended Configurations
Beacon period.............................. 100 milliseconds
Beacon range............................... AUTO
Multicast buffer........................... AUTO
Multicast data-rate........................ AUTO
RX SOP threshold........................... AUTO
CCA threshold.............................. AUTO
Cisco AP Identifier.............................. 0
Cisco AP Name.................................... AP6c20.56a0.b352
Country code..................................... SA - Saudi Arabia
Regulatory Domain allowed by Country............. 802.11bg:-AE 802.11a:-E
AP Country code.................................. SA - Saudi Arabia
AP Regulatory Domain............................. -E
Switch Port Number .............................. 1
--More or (q)uit current module or to abort
MAC Address...................................... 6c:20:56:a0:b3:52
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.0.111
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.0.220
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
--More or (q)uit current module or to abort
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.3.101.0
Boot Version ................................... 12.4.2.4
Mini IOS Version ................................ 7.3.1.73
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1262N-E-K9
AP Image......................................... C1260-K9W8-M
IOS Version...................................... 15.2(2)JA$
Reset Button..................................... Enabled
AP Serial Number................................. FCZ1642Z0A6
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... CUSTOMIZED
AP User Name..................................... dawaa
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
--More or (q)uit current module or to abort
AP Up Time....................................... 0 days, 22 h 01 m 44 s
AP LWAPP Up Time................................. 0 days, 01 h 25 m 37 s
Join Date and Time............................... Wed Mar 13 16:10:25 2013
Join Taken Time.................................. 0 days, 00 h 02 m 19 s
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211n-5
Radio Subband................................ RADIO_SUBBAND_ALL
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 1c:e6:c7:04:7a:20
Operation Rate Set
6000 Kilo Bits........................... MANDATORY
--More or (q)uit current module or to abort
9000 Kilo Bits........................... SUPPORTED
12000 Kilo Bits.......................... MANDATORY
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... MANDATORY
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
MCS Set
MCS 0.................................... DISABLED
MCS 1.................................... DISABLED
MCS 2.................................... DISABLED
MCS 3.................................... SUPPORTED
MCS 4.................................... SUPPORTED
MCS 5.................................... SUPPORTED
MCS 6.................................... SUPPORTED
MCS 7.................................... SUPPORTED
MCS 8.................................... SUPPORTED
MCS 9.................................... SUPPORTED
MCS 10................................... SUPPORTED
MCS 11................................... SUPPORTED
MCS 12................................... SUPPORTED
MCS 13................................... SUPPORTED
MCS 14................................... SUPPORTED
--More or (q)uit current module or to abort
MCS 15................................... SUPPORTED
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ SA
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 36
Number Of Channels ........................ 4
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
--More or (q)uit current module or to abort
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 7
Tx Power Level 1 .......................... 17 dBm
Tx Power Level 2 .......................... 14 dBm
Tx Power Level 3 .......................... 11 dBm
Tx Power Level 4 .......................... 8 dBm
Tx Power Level 5 .......................... 5 dBm
Tx Power Level 6 .......................... 2 dBm
Tx Power Level 7 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 36
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
......................................... 104,108,112,116,132,136,140
TI Threshold .............................. -50
Legacy Tx Beamforming Configuration ....... CUSTOMIZED
--More or (q)uit current module or to abort
Legacy Tx Beamforming ..................... ENABLED
Antenna Type............................... EXTERNAL_ANTENNA
External Antenna Gain (in .5 dBi units).... 0
Diversity.................................. DIVERSITY_ENABLED
802.11n Antennas
A....................................... ENABLED
B....................................... ENABLED
C....................................... ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 16 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
--More or (q)uit current module or to abort
CleanAir Capable......................... No
Radio Extended Configurations
Beacon period.............................. 100 milliseconds
Beacon range............................... AUTO
Multicast buffer........................... AUTO
Multicast data-rate........................ AUTO
RX SOP threshold........................... AUTO
CCA threshold.............................. AUTO
Press Enter to continue or to abort
Cisco AP Identifier.............................. 1
Cisco AP Name.................................... AP6c20.5666.e34a
Country code..................................... SA - Saudi Arabia
Regulatory Domain allowed by Country............. 802.11bg:-AE 802.11a:-E
AP Country code.................................. SA - Saudi Arabia
AP Regulatory Domain............................. -E
Switch Port Number .............................. 1
MAC Address...................................... 6c:20:56:66:e3:4a
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.0.39
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.0.220
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or to abort
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.3.101.0
Boot Version ................................... 12.4.2.4
Mini IOS Version ................................ 7.3.1.73
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1262N-E-K9
AP Image......................................... C1260-K9W8-M
IOS Version...................................... 15.2(2)JA$
--More or (q)uit current module or to abort
Reset Button..................................... Enabled
AP Serial Number................................. FCZ1642Z09V
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 0 days, 22 h 03 m 17 s
AP LWAPP Up Time................................. 0 days, 01 h 28 m 23 s
Join Date and Time............................... Wed Mar 13 16:10:26 2013
Join Taken Time.................................. 0 days, 00 h 02 m 04 s
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211n-2.4
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
--More or (q)uit current module or to abort
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 54:78:1a:f2:51:c0
Operation Rate Set
1000 Kilo Bits........................... SUPPORTED
2000 Kilo Bits........................... SUPPORTED
5500 Kilo Bits........................... SUPPORTED
11000 Kilo Bits.......................... MANDATORY
MCS Set
MCS 0.................................... DISABLED
MCS 1.................................... DISABLED
MCS 2.................................... SUPPORTED
MCS 3.................................... DISABLED
MCS 4.................................... DISABLED
MCS 5.................................... DISABLED
MCS 6.................................... DISABLED
MCS 7.................................... DISABLED
MCS 8.................................... DISABLED
MCS 9.................................... DISABLED
MCS 10................................... DISABLED
MCS 11................................... DISABLED
--More or (q)uit current module or to abort
MCS 12................................... DISABLED
MCS 13................................... DISABLED
MCS 14................................... DISABLED
MCS 15................................... DISABLED
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ SA
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 13
--More or (q)uit current module or to abort
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 2
Phy DSSS parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 1
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
--More or (q)uit current module or to abort
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11,12,
......................................... 13
Current CCA Mode .......................... 0
ED Threshold .............................. -50
Legacy Tx Beamforming Configuration ....... CUSTOMIZED
Legacy Tx Beamforming ..................... ENABLED
Antenna Type............................... EXTERNAL_ANTENNA
External Antenna Gain (in .5 dBi units).... 0
Diversity.................................. DIVERSITY_ENABLED
802.11n Antennas
A....................................... ENABLED
B....................................... ENABLED
C....................................... ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
Coverage exception level................... 25 %
--More or (q)uit current module or to abort
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Radio Extended Configurations
Beacon period.............................. 100 milliseconds
Beacon range............................... AUTO
Multicast buffer........................... AUTO
Multicast data-rate........................ AUTO
RX SOP threshold........................... AUTO
CCA threshold.............................. AUTO
Cisco AP Identifier.............................. 1
Cisco AP Name.................................... AP6c20.5666.e34a
Country code..................................... SA - Saudi Arabia
Regulatory Domain allowed by Country............. 802.11bg:-AE 802.11a:-E
AP Country code.................................. SA - Saudi Arabia
AP Regulatory Domain............................. -E
Switch Port Number .............................. 1
MAC Address...................................... 6c:20:56:66:e3:4a
--More or (q)uit current module or to abort
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.0.39
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.0.220
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
--More or (q)uit current module or to abort
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.3.101.0
Boot Version ................................... 12.4.2.4
Mini IOS Version ................................ 7.3.1.73
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1262N-E-K9
AP Image......................................... C1260-K9W8-M
IOS Version...................................... 15.2(2)JA$
Reset Button..................................... Enabled
AP Serial Number................................. FCZ1642Z09V
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 0 days, 22 h 03 m 17 s
--More or (q)uit current module or to abort
AP LWAPP Up Time................................. 0 days, 01 h 28 m 23 s
Join Date and Time............................... Wed Mar 13 16:10:26 2013
Join Taken Time.................................. 0 days, 00 h 02 m 04 s
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211n-5
Radio Subband................................ RADIO_SUBBAND_ALL
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 54:78:1a:f2:51:c0
Operation Rate Set
6000 Kilo Bits........................... MANDATORY
9000 Kilo Bits........................... SUPPORTED
--More or (q)uit current module or to abort
12000 Kilo Bits.......................... MANDATORY
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... MANDATORY
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
MCS Set
MCS 0.................................... DISABLED
MCS 1.................................... DISABLED
MCS 2.................................... DISABLED
MCS 3.................................... SUPPORTED
MCS 4.................................... SUPPORTED
MCS 5.................................... SUPPORTED
MCS 6.................................... SUPPORTED
MCS 7.................................... SUPPORTED
MCS 8.................................... SUPPORTED
MCS 9.................................... SUPPORTED
MCS 10................................... SUPPORTED
MCS 11................................... SUPPORTED
MCS 12................................... SUPPORTED
MCS 13................................... SUPPORTED
MCS 14................................... SUPPORTED
MCS 15................................... SUPPORTED
--More or (q)uit current module or to abort
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ SA
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 36
Number Of Channels ........................ 4
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
--More or (q)uit current module or to abort
Tx Power
Num Of Supported Power Levels ............. 7
Tx Power Level 1 .......................... 17 dBm
Tx Power Level 2 .......................... 14 dBm
Tx Power Level 3 .......................... 11 dBm
Tx Power Level 4 .......................... 8 dBm
Tx Power Level 5 .......................... 5 dBm
Tx Power Level 6 .......................... 2 dBm
Tx Power Level 7 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 64
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
......................................... 104,108,112,116,132,136,140
TI Threshold .............................. -50
Legacy Tx Beamforming Configuration ....... CUSTOMIZED
Legacy Tx Beamforming ..................... ENABLED
--More or (q)uit current module or to abort
Antenna Type............................... EXTERNAL_ANTENNA
External Antenna Gain (in .5 dBi units).... 0
Diversity.................................. DIVERSITY_ENABLED
802.11n Antennas
A....................................... ENABLED
B....................................... ENABLED
C....................................... ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 16 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
--More or (q)uit current module or to abort
Radio Extended Configurations
Beacon period.............................. 100 milliseconds
Beacon range............................... AUTO
Multicast buffer........................... AUTO
Multicast data-rate........................ AUTO
RX SOP threshold........................... AUTO
CCA threshold.............................. AUTO
Press Enter to continue or to abort
Cisco AP Identifier.............................. 2
Cisco AP Name.................................... AP6c20.56a0.b341
Country code..................................... SA - Saudi Arabia
Regulatory Domain allowed by Country............. 802.11bg:-AE 802.11a:-E
AP Country code.................................. SA - Saudi Arabia
AP Regulatory Domain............................. -E
Switch Port Number .............................. 1
MAC Address...................................... 6c:20:56:a0:b3:41
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.0.120
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.0.220
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or to abort
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.3.101.0
Boot Version ................................... 12.4.2.4
Mini IOS Version ................................ 7.3.1.73
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1262N-E-K9
AP Image......................................... C1260-K9W8-M
IOS Version...................................... 15.2(2)JA$
--More or (q)uit current module or to abort
Reset Button..................................... Enabled
AP Serial Number................................. FCZ1642Z09Y
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... CUSTOMIZED
AP User Name..................................... dawaa
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 0 days, 22 h 07 m 08 s
AP LWAPP Up Time................................. 0 days, 01 h 31 m 05 s
Join Date and Time............................... Wed Mar 13 16:10:26 2013
Join Taken Time.................................. 0 days, 00 h 02 m 19 s
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211n-2.4
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
--More or (q)uit current module or to abort
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 1c:e6:c7:04:81:f0
Operation Rate Set
1000 Kilo Bits........................... SUPPORTED
2000 Kilo Bits........................... SUPPORTED
5500 Kilo Bits........................... SUPPORTED
11000 Kilo Bits.......................... MANDATORY
MCS Set
MCS 0.................................... DISABLED
MCS 1.................................... DISABLED
MCS 2.................................... SUPPORTED
MCS 3.................................... DISABLED
MCS 4.................................... DISABLED
MCS 5.................................... DISABLED
MCS 6.................................... DISABLED
MCS 7.................................... DISABLED
MCS 8.................................... DISABLED
MCS 9.................................... DISABLED
MCS 10................................... DISABLED
MCS 11................................... DISABLED
--More or (q)uit current module or to abort
MCS 12................................... DISABLED
MCS 13................................... DISABLED
MCS 14................................... DISABLED
MCS 15................................... DISABLED
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String .............. -
LMS 4.2.4 -- Problem with UT & Inventory when using SNMP v3
Hello,
I have created a Credential-Set with SNMP v2 and SNMP v3 credentials and enabled at the discovery settings the fallback option from snmp v3 to v2. For the discovery this setting works but at the inventory collection and the UT it seems that the LMS just tries the snmp v3 credentials. Is there a way to enable also a fallback to snmp v2? Because now only our devices with snmp v3 get a success all other devices get a failed.
Using LMS 4.2.4
regards,
DavidHi David,
What type of credentials set you are using in DCR ?
there is no fall back mechnasim for Inventory collectio and User tracking .
Inventory collection and user tracking will get the credentials from the credentials that you are using in DCR .
Inventory should be sucessfull as long as you have correct credentils defied in DCR.
Thanks-
Afroz
[Do rate the useful post] -
Hi everyone.
I just installed SCCM 2012 on windows Server 2012 R2 and it on (real) HOST PC not a VM.
before I installed SQL 2012 And domain on same server. i know it's Far not recommended. but
Problem is my SCCM 2012 cannot discover any device in my network,when OS it self (in: my computer\ My network) can see all the host pc that i have in my environment.
i turned on all the methods of discovery.
Please help.i tried everything, even reinstall, everything from beginning,
1. install Win Server 2008 R2, install all updates, and then activate it.
2 Roles : a. Active Directory Domain Services
b. DNS
c. File Services
d. web Server (IIS)
e. WSUS
3. made container :System management
. WSUS + updates WSUS-KB2720211-x64, WSUS-KB2734608-x64
.opened ports
.did changes in IIS
. install SQL 2012 with cuml Updates "SQLServer2012-KB2703275-x64"
. checked TCP/IP
. installed windows assessment and deployment kit for win 8.1
and finally
.installed SCCm 2012 R2 . without any errors, just 2 warnings.
pc is Domain controller and wind Firewall
BUt still no sense
no users or devices in assets and compliance -
I am currently setting up a 4402 controller and lwapps. Our wireless right now is all managed by corp and is a combination of autonomous and lwapp. Here is my problem.
I have setup option43 in my dhcp scope. When I connect a fresh radio to the same subnet as the controller I see that the radio goes to the controller but then there is a message and the radio goes to the corp controller.
Here is the boot log from a new radio.
%LWAPP-3-CLIENTEVENTLOG: Controller address 10.200.190.10(MINE) obtained through DHCP
%LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP.
%LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER.gtna.gt.ds
%LWAPP-3-CLIENTEVENTLOG: Controller address 10.148.198.7(CORP) obtained through DNS
I see that message about a log server. Did I miss something?
thanks
tonyHi Guys,
I just thought that I would link this info for the LWAPP Layer 3 startup. +5 points for both Wesley and Leo for your ongoing great work here :)
The LWAPP AP goes through this process on startup for Layer 3 mode:
The LAP boots and DHCPs an IP address if it was not previously assigned a static IP address.
The LAP sends discovery requests to controllers through the various discovery algorithms and builds a controller list. Essentially, the LAP learns as many management interface addresses for the controller list as possible via:
DHCP option 43 (good for global companies where offices and controllers are on different continents)
DNS entry for âcisco-lwapp-controllerâ (good for local businesses - can also be used to find where brand new APs join)
Management IP addresses of controllers the LAP remembers previously
A Layer 3 broadcast on the subnet
Over the air provisioning
Statically configured information
From this list, the easiest method to use for deployment is to have the LAPs on the same subnet as the management interface of the controller and allow the LAP's Layer 3 broadcast to find the controller. This method should be used for companies that have a small network and do not own a local DNS server.
The next easiest method of deployment is to use a DNS entry with DHCP. You can have multiple entries of the same DNS name. This allows the LAP to discover multiple controllers. This method should be used by companies that have all of their controllers in a single location and own a local DNS server. Or, if the company has multiple DNS suffixes and the controllers are segregated by suffix.
DHCP option 43 is used by large companies to localize the information via the DHCP. This method is used by large enterprises that have a single DNS suffix. For example, Cisco owns buildings in Europe, Australia, and the United States. In order to ensure that the LAPs only join controllers locally, Cisco cannot use a DNS entry and must use DHCP option 43 information to tell the LAPs what the management IP address of their local controller is.
Finally, static configuration is used for a network that does not have a DHCP server.You can statically configure the information necessary to join a controller via the console port and the AP's CLI. For information on how to statically configure controller information using the AP CLI, refer to Manually Configuring Controller Information Using the Access Point CLI.
For a detailed explanation on the different discovery algorithms that LAPs use to find controllers, refer to LAP Registration with WLC.
For information on configuring DHCP option 43 on a DHCP server, refer to DHCP OPTION 43 for Lightweight Cisco Aironet Access Points Configuration Example.
Send a discovery request to every controller on the list and wait for the controller's discovery reply which contains the system name, AP-manager IP addresses, the number of APs already attached to each AP-manager interface, and overall excess capacity for the controller.
Look at the controller list and send a join request to a controller in this order (only if the AP received a discovery reply from it):
Primary Controller system name (previously configured on LAP)
Secondary Controller system name (previously configured on LAP)
Tertiary Controller system name (previously configured on LAP)
Master controller (if the LAP has not been previously configured with any Primary, Secondary, or Tertiary controller names. Used to always know which controller brand new LAPs join)
....continued on next page -
Mac OS 10.5.6 network discovery problems
Hello All!!
I have got a small network in my home. There is Two apple computers (one iMac wired to network another MacBook wireless), one Vista computer (wired) and two Vista laptops (wireless)
All the Windows based computers have no problems with seeing all the computers connected to network. But the apple computers got it different way.
Sometimes i am able to see all the computers connected (even the windows based ones:)
But most of the time i can see only the other mac (MacBook)
Of course manual connection trough "Go.. Connect to Server" is working fine with all the computers.
My question is: "Why my iMac and the other MacBook are have problems with seeing all the computers all the times? Why its only sometimes i can see them all in Finder?"
Thank you
JacobWe have the same problem. The user rights under Leopard are not interpreted correctly while the Tiger clients show the correct entries. I´ve posted another topic to that thing...
-
Hi,
we have some routers with poor bandwith, and lot of HighUtilizaton SYSLOG messages.
I create new event set for them in DFM, I unchecked the HighUtilizaton message, but I still got the HighUtilization messages.
What could be the problem? Thanks for your help.Post a sample of the messages you are recieving.
-
Hi,
I am trying to setup syslog server on LMS 4.0.
Everything seems to be working fine but I have a lot of stragne logs in my syslog.log file.
Every single day I receive logs like :
Mar 05 09:31:03 127.0.0.1 100: <30> dmgt[1136]: 3007(I):Started application(1015) "e:\CSCOpx\bin\cwjava.exe -cw:jre lib/jre -cp e:\CSCOpx\MDC\tomcat\shared\lib\MICE.jar;e:\CSCOpx\MDC\tomcat\shared\lib\NATIVE.jar;e:\CSCOpx\MDC\tomcat\shared\lib\jdom.jar;e:\CSCOpx\MDC\tomcat\shared\lib\xalan.jar;e:\CSCOpx\MDC\tomcat\shared\lib\xerces.jar;e:\CSCOpx\MDC\tomcat\common\lib\servlet.jar;e:\CSCOpx\MDC\tomcat\shared\lib\castor-0.9.5.jar;e:\CSCOpx\MDC\tomcat\shared\lib\castor-0.9.5-xml.jar;e:\CSCOpx\lib\classpath;e:\CSCOpx\www\classpath;www\classpath\vbjorb.jar;MDC\tomcat\webapps\upm\WEB-INF\classes;lib\jre\lib\endorsed\jacorb.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\ctm.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\log4j.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\jep-3.2.0.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\struts.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\upmcmn.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\upmplr.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\xstream-1.1.1.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\xpp3.jar;MDC\tomcat\webapps\up
Mar 05 09:31:03 127.0.0.1 100: <30> dmgt[1136]: 3009(I):Application "1018" registered.
Mar 05 09:31:03 127.0.0.1 100: <30> dmgt[1136]: 3007(I):Started application(1018) "e:\CSCOpx\bin\cwjava.exe -cw:jre lib/jre -cp e:\CSCOpx\MDC\tomcat\shared\lib\MICE.jar;e:\CSCOpx\MDC\tomcat\shared\lib\NATIVE.jar;e:\CSCOpx\MDC\tomcat\shared\lib\jdom.jar;e:\CSCOpx\MDC\tomcat\shared\lib\xalan.jar;e:\CSCOpx\MDC\tomcat\shared\lib\xerces.jar;e:\CSCOpx\MDC\tomcat\common\lib\servlet.jar;e:\CSCOpx\MDC\tomcat\shared\lib\castor-0.9.5.jar;e:\CSCOpx\MDC\tomcat\shared\lib\castor-0.9.5-xml.jar;e:\CSCOpx\lib\classpath;e:\CSCOpx\www\classpath;www\classpath\vbjorb.jar;MDC\tomcat\webapps\upm\WEB-INF\classes;lib\jre\lib\endorsed\jacorb.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\log4j.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\jep-3.2.0.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\ags.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\xdi.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\ctm.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\deviceselector.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\mibmgr.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\upmcmn.jar;MDC\tomcat\webapps\upm\W
Mar 05 09:31:36 127.0.0.1 100: <30> dmgt[1136]: 3021(I):Died method called for process (1018, pid=6600).
Mar 05 09:31:36 127.0.0.1 100: <30> dmgt[1136]: 3011(I):Application "1018" unregistered.
Mar 05 09:31:36 127.0.0.1 100: <30> dmgt[1136]: 3021(I):Died method called for process (1015, pid=5632).
Mar 05 09:31:36 127.0.0.1 100: <30> dmgt[1136]: 3011(I):Application "1015" unregistered.
Mar 05 10:48:01 127.0.0.1 100: <30> dmgt[1136]: 3021(I):Died method called for process (UTMajorAcquisition, pid=10388).
Mar 05 08:31:03 127.0.0.1 100: <30> dmgt[1136]: 3009(I):Application "1015" registered.
Mar 05 08:31:03 127.0.0.1 100: <30> dmgt[1136]: 3007(I):Started application(1015) "e:\CSCOpx\bin\cwjava.exe -cw:jre lib/jre -cp e:\CSCOpx\MDC\tomcat\shared\lib\MICE.jar;e:\CSCOpx\MDC\tomcat\shared\lib\NATIVE.jar;e:\CSCOpx\MDC\tomcat\shared\lib\jdom.jar;e:\CSCOpx\MDC\tomcat\shared\lib\xalan.jar;e:\CSCOpx\MDC\tomcat\shared\lib\xerces.jar;e:\CSCOpx\MDC\tomcat\common\lib\servlet.jar;e:\CSCOpx\MDC\tomcat\shared\lib\castor-0.9.5.jar;e:\CSCOpx\MDC\tomcat\shared\lib\castor-0.9.5-xml.jar;e:\CSCOpx\lib\classpath;e:\CSCOpx\www\classpath;www\classpath\vbjorb.jar;MDC\tomcat\webapps\upm\WEB-INF\classes;lib\jre\lib\endorsed\jacorb.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\ctm.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\log4j.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\jep-3.2.0.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\struts.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\upmcmn.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\upmplr.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\xstream-1.1.1.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\xpp3.jar;MDC\tomcat\webapps\up
Mar 05 08:31:03 127.0.0.1 100: <30> dmgt[1136]: 3009(I):Application "1018" registered.
Mar 05 08:31:03 127.0.0.1 100: <30> dmgt[1136]: 3007(I):Started application(1018) "e:\CSCOpx\bin\cwjava.exe -cw:jre lib/jre -cp e:\CSCOpx\MDC\tomcat\shared\lib\MICE.jar;e:\CSCOpx\MDC\tomcat\shared\lib\NATIVE.jar;e:\CSCOpx\MDC\tomcat\shared\lib\jdom.jar;e:\CSCOpx\MDC\tomcat\shared\lib\xalan.jar;e:\CSCOpx\MDC\tomcat\shared\lib\xerces.jar;e:\CSCOpx\MDC\tomcat\common\lib\servlet.jar;e:\CSCOpx\MDC\tomcat\shared\lib\castor-0.9.5.jar;e:\CSCOpx\MDC\tomcat\shared\lib\castor-0.9.5-xml.jar;e:\CSCOpx\lib\classpath;e:\CSCOpx\www\classpath;www\classpath\vbjorb.jar;MDC\tomcat\webapps\upm\WEB-INF\classes;lib\jre\lib\endorsed\jacorb.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\log4j.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\jep-3.2.0.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\ags.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\xdi.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\ctm.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\deviceselector.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\mibmgr.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\upmcmn.jar;MDC\tomcat\webapps\upm\W
Mar 05 08:31:39 127.0.0.1 100: <30> dmgt[1136]: 3021(I):Died method called for process (1015, pid=7600).
Mar 05 08:31:39 127.0.0.1 100: <30> dmgt[1136]: 3011(I):Application "1015" unregistered.
Mar 05 08:31:39 127.0.0.1 100: <30> dmgt[1136]: 3021(I):Died method called for process (1018, pid=6596).
Mar 05 08:31:39 127.0.0.1 100: <30> dmgt[1136]: 3011(I):Application "1018" unregistered.
I dont want to get any logs from 127.0.0.1. Is it possible to filter out logs from server ?
Thanks and best regars.I don't think you can easily stop LMS from logging its own starting and stopping of processes.
Why does this bother you? It doesn't appear in you reports
Cheers,
Michel
Maybe you are looking for
-
Hi Experts, I am loading Data for 0FIGL_O02 DSO (Business Content) How can i check wether delta is working properly. Thanks
-
Importing SQL into Discoverer?
I've converted an Access application (35 tables and 150 queries) to Oracle. Is there any way to import or 'cut and paste' the SQL into Discoverer? I don't like to think I have to do each by hand.
-
BW Security roles based on query
Hello All, If a User 1 needs to have access to ZQUERY_1 restricted by a company code AB11 and need to have full access (without restriction to AB11) to a different query ZQUERY_2. Similarly if a User 2 needs to have access to ZQUERY_1 restricted by a
-
2008 Macbook pro Spinning color wheel
2008 Macbook pro will load to the desktop after login, but the spinning color wheel spins nonstop. I can access application on the dock, but i cannot click on any functions on the top toolbar. I restored the OS but it just sat at a grey loading scree
-
Purchased app "Million Pound Drop" Play Any Tim - but it won't download?
Any advice on app that will not download?