LMS 4.2 ANIserver problem

Hello, we are running LMS 4.2.2 and our Topology maps have stopped working and I noticed that the ANIserver process is down.
By tailing the /var/adm/CSCOpx/log/dmgtd.log i got the messages below, any idea whats going on?
A shutdown of LMS + reboot did not help.
BR /Crille
Jan  9 12:39:12 xxx dmgt[3318]: #3007:TYPE=INFO:Started application(ANIServer) "/opt/CSCOpx/lib/jre/bin/java -Xbootclasspath:/opt/CSCOpx/lib/jre/lib/jsse.jar:/opt/CSCOpx/MDC/tomcat/webapps/campus/WEB-INF/classes:/opt/CSCOpx/MDC/tomcat/webapps/campus/WEB-INF/lib/log4j.jar:/opt/CSCOpx/www/classpath/jacorb.jar:/opt/CSCOpx/lib/jre/lib/rt.jar:/opt/CSCOpx/lib/jre/lib/jce.jar -Xminf0.1 -Xmaxf0.1 -Djava.class.path=/opt/CSCOpx/campus/lib/classpath/castor-1.2.jar:/opt/CSCOpx/campus/lib/classpath/commons-logging-1.1.1.jar:/opt/CSCOpx/campus/www/classpath/jndi.jar:/opt/CSCOpx/campus/www/classpath/providerutil.jar:/opt/CSCOpx/lib/jre/lib/ext/dnsns.jar:/opt/CSCOpx/campus/lib/classpath:/opt/CSCOpx/campus/www/classpath:/opt/CSCOpx/lib/classpath:/opt/CSCOpx/www/classpath:/opt/CSCOpx/MDC/tomcat/webapps/campus/WEB-INF/lib/ctm.jar:/opt/CSCOpx/lib/classpath/cmfjms.jar:/opt/CSCOpx/MDC/tomcat/webapps/campus/WEB-INF/lib/xalan.jar:/opt/CSCOpx/MDC/tomcat/webapps/campus/WEB-INF/lib/xerces.jar:/opt/CSCOpx/lib/jre/lib/jsse.jar:/opt/CSCOpx/lib/jre/lib/jce.jar:/opt/CSCO
Jan  9 12:39:16 xxx dmgt[3318]: #3021:TYPE=INFO:Died method called for process (ANIServer, pid=10851).#015
Jan  9 12:39:16 xxx dmgt[3318]: #2135:TYPE=WARNING:Stale socket -1 while establishing connection with ANIServer: Bad file descriptor. #015

Topology is dependent on ANIServer and it may not work if it goes down. Better is you share aniserver.properties and aniserver.log and ani.log from your server for more insight.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

Similar Messages

  • LMS 3.2 discovery problem

    Hi
    I am doing a POC at one of the customer location for LMS 3.2
    Now the problem i am fcaing is that when i have enabled the discovery based on CDP i am only able to discover two to 3 cisoc device only.
    The customer has around 75 cisco devices including routers.
    Its is not able to discovers the MPLS router across WAN however it is discovering the router where peer to peer link is there.
    Am i missing something
    I have enabled CDP in all the devices but still it is not able to discover the devoves.
    I am using the evaluation version.
    Thanks

    Make sure the SNMP credentials you have configured in Discovery are the correct ones, and that the LMS server is capable of polling these missing devices with SNMP.  You can use a sniffer trace filtering on udp/161 traffic to see what Discovery is sending, and whether or not the devices are replying correctly.
    Yes, Discovery will pick up firewalls with the ICMP module provided the firewall allows LMS to ping it, and poll it with SNMP.

  • LMS 3.2 Notification problem

    Hi,
    we have some routers with poor bandwith, and lot of HighUtilizaton SYSLOG messages.
    I create new event set for them in DFM, I unchecked the HighUtilizaton message, but I still got the HighUtilization messages.
    What could be the problem? Thanks for your help.

    Post a sample of the messages you are recieving.

  • LMS 4.0 syslog problem

    Hi,
    I am trying to setup syslog server on LMS 4.0.
    Everything seems to be working fine but I have a lot of stragne logs in my syslog.log file.
    Every single day I receive logs like :
    Mar 05 09:31:03 127.0.0.1 100: <30>   dmgt[1136]: 3007(I):Started application(1015) "e:\CSCOpx\bin\cwjava.exe -cw:jre lib/jre -cp e:\CSCOpx\MDC\tomcat\shared\lib\MICE.jar;e:\CSCOpx\MDC\tomcat\shared\lib\NATIVE.jar;e:\CSCOpx\MDC\tomcat\shared\lib\jdom.jar;e:\CSCOpx\MDC\tomcat\shared\lib\xalan.jar;e:\CSCOpx\MDC\tomcat\shared\lib\xerces.jar;e:\CSCOpx\MDC\tomcat\common\lib\servlet.jar;e:\CSCOpx\MDC\tomcat\shared\lib\castor-0.9.5.jar;e:\CSCOpx\MDC\tomcat\shared\lib\castor-0.9.5-xml.jar;e:\CSCOpx\lib\classpath;e:\CSCOpx\www\classpath;www\classpath\vbjorb.jar;MDC\tomcat\webapps\upm\WEB-INF\classes;lib\jre\lib\endorsed\jacorb.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\ctm.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\log4j.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\jep-3.2.0.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\struts.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\upmcmn.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\upmplr.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\xstream-1.1.1.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\xpp3.jar;MDC\tomcat\webapps\up
    Mar 05 09:31:03 127.0.0.1 100: <30>   dmgt[1136]: 3009(I):Application "1018" registered.
    Mar 05 09:31:03 127.0.0.1 100: <30>   dmgt[1136]: 3007(I):Started application(1018) "e:\CSCOpx\bin\cwjava.exe -cw:jre lib/jre -cp e:\CSCOpx\MDC\tomcat\shared\lib\MICE.jar;e:\CSCOpx\MDC\tomcat\shared\lib\NATIVE.jar;e:\CSCOpx\MDC\tomcat\shared\lib\jdom.jar;e:\CSCOpx\MDC\tomcat\shared\lib\xalan.jar;e:\CSCOpx\MDC\tomcat\shared\lib\xerces.jar;e:\CSCOpx\MDC\tomcat\common\lib\servlet.jar;e:\CSCOpx\MDC\tomcat\shared\lib\castor-0.9.5.jar;e:\CSCOpx\MDC\tomcat\shared\lib\castor-0.9.5-xml.jar;e:\CSCOpx\lib\classpath;e:\CSCOpx\www\classpath;www\classpath\vbjorb.jar;MDC\tomcat\webapps\upm\WEB-INF\classes;lib\jre\lib\endorsed\jacorb.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\log4j.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\jep-3.2.0.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\ags.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\xdi.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\ctm.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\deviceselector.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\mibmgr.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\upmcmn.jar;MDC\tomcat\webapps\upm\W
    Mar 05 09:31:36 127.0.0.1 100: <30>   dmgt[1136]: 3021(I):Died method called for process (1018, pid=6600).
    Mar 05 09:31:36 127.0.0.1 100: <30>   dmgt[1136]: 3011(I):Application "1018" unregistered.
    Mar 05 09:31:36 127.0.0.1 100: <30>   dmgt[1136]: 3021(I):Died method called for process (1015, pid=5632).
    Mar 05 09:31:36 127.0.0.1 100: <30>   dmgt[1136]: 3011(I):Application "1015" unregistered.
    Mar 05 10:48:01 127.0.0.1 100: <30>   dmgt[1136]: 3021(I):Died method called for process (UTMajorAcquisition, pid=10388).
    Mar 05 08:31:03 127.0.0.1 100: <30>   dmgt[1136]: 3009(I):Application "1015" registered.
    Mar 05 08:31:03 127.0.0.1 100: <30>   dmgt[1136]: 3007(I):Started application(1015) "e:\CSCOpx\bin\cwjava.exe -cw:jre lib/jre -cp e:\CSCOpx\MDC\tomcat\shared\lib\MICE.jar;e:\CSCOpx\MDC\tomcat\shared\lib\NATIVE.jar;e:\CSCOpx\MDC\tomcat\shared\lib\jdom.jar;e:\CSCOpx\MDC\tomcat\shared\lib\xalan.jar;e:\CSCOpx\MDC\tomcat\shared\lib\xerces.jar;e:\CSCOpx\MDC\tomcat\common\lib\servlet.jar;e:\CSCOpx\MDC\tomcat\shared\lib\castor-0.9.5.jar;e:\CSCOpx\MDC\tomcat\shared\lib\castor-0.9.5-xml.jar;e:\CSCOpx\lib\classpath;e:\CSCOpx\www\classpath;www\classpath\vbjorb.jar;MDC\tomcat\webapps\upm\WEB-INF\classes;lib\jre\lib\endorsed\jacorb.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\ctm.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\log4j.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\jep-3.2.0.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\struts.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\upmcmn.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\upmplr.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\xstream-1.1.1.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\xpp3.jar;MDC\tomcat\webapps\up
    Mar 05 08:31:03 127.0.0.1 100: <30>   dmgt[1136]: 3009(I):Application "1018" registered.
    Mar 05 08:31:03 127.0.0.1 100: <30>   dmgt[1136]: 3007(I):Started application(1018) "e:\CSCOpx\bin\cwjava.exe -cw:jre lib/jre -cp e:\CSCOpx\MDC\tomcat\shared\lib\MICE.jar;e:\CSCOpx\MDC\tomcat\shared\lib\NATIVE.jar;e:\CSCOpx\MDC\tomcat\shared\lib\jdom.jar;e:\CSCOpx\MDC\tomcat\shared\lib\xalan.jar;e:\CSCOpx\MDC\tomcat\shared\lib\xerces.jar;e:\CSCOpx\MDC\tomcat\common\lib\servlet.jar;e:\CSCOpx\MDC\tomcat\shared\lib\castor-0.9.5.jar;e:\CSCOpx\MDC\tomcat\shared\lib\castor-0.9.5-xml.jar;e:\CSCOpx\lib\classpath;e:\CSCOpx\www\classpath;www\classpath\vbjorb.jar;MDC\tomcat\webapps\upm\WEB-INF\classes;lib\jre\lib\endorsed\jacorb.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\log4j.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\jep-3.2.0.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\ags.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\xdi.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\ctm.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\deviceselector.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\mibmgr.jar;MDC\tomcat\webapps\upm\WEB-INF\lib\upmcmn.jar;MDC\tomcat\webapps\upm\W
    Mar 05 08:31:39 127.0.0.1 100: <30>   dmgt[1136]: 3021(I):Died method called for process (1015, pid=7600).
    Mar 05 08:31:39 127.0.0.1 100: <30>   dmgt[1136]: 3011(I):Application "1015" unregistered.
    Mar 05 08:31:39 127.0.0.1 100: <30>   dmgt[1136]: 3021(I):Died method called for process (1018, pid=6596).
    Mar 05 08:31:39 127.0.0.1 100: <30>   dmgt[1136]: 3011(I):Application "1018" unregistered.
    I dont want to get any logs from 127.0.0.1. Is it possible to filter out logs from server ?
    Thanks and best regars.

    I don't think you can easily stop LMS from logging its own starting and stopping of processes.
    Why does this bother you? It doesn't appear in you reports
    Cheers,
    Michel

  • Cisco Works LMS 3.1: ANIServer failed to start

    Hi fellows,
    I've been trying to start the ANIServer process manually, also rebooted the CW server couple of times, but the ANIServer process wouldn't start.
    This issue started 3 days ago and I'm sure no settings have been changed on the server.
    Any thoughts would be much appreciated.
    Many thanks,
    Moath,

    Well, that works too .  Your ANIServer.properties was probably corrupted.  When this happens you can restore from the .orig after some minor changes.  Corrupted files is a common issue on Windows platforms mostly, and can occurr due to full disk drive, unclean shutdown of processes, power outage, anti-virus scanning among others.  Basically, follow these guidelines which can also apply during an upgrade.

  • LMS 4.2.4 -- Problem with UT & Inventory when using SNMP v3

    Hello,
    I have created a Credential-Set with SNMP v2 and SNMP v3 credentials and enabled at the discovery settings the fallback option from snmp v3 to v2. For the discovery this setting works but at the inventory collection and the UT it seems that the LMS just tries the snmp v3 credentials. Is there a way to enable also a fallback to snmp v2? Because now only our devices with snmp v3 get a success all other devices get a failed.
    Using LMS 4.2.4
    regards,
    David

    Hi David,
    What type of credentials set you are using  in DCR ?
    there is no fall back mechnasim for Inventory collectio and User tracking .
    Inventory collection and user tracking will get the credentials  from the credentials that you are using in DCR .
    Inventory should be sucessfull as long as you have correct credentils defied in DCR.
    Thanks-
    Afroz
    [Do rate the useful post]

  • How to make course 'review' from LMS app?

    I have package and uploaded my CP 5 lesson into LMS (SumTotal) and works as expected. I need the ablility to review the content after the first time a user views and recorded as 'Completed/Passed'. Is there a special setting is CP? I can click the review option is LMS and it plays the first and last slides extremely fast and then closes. Any guidance is extremely appreciated. I have to have this finalized by Friday October 12. Thanks in advance, Diana

    This something you have to organise via the LMS settings.  Your problem will be that in SumTotal if the user re-enters the content after completing it, SumTotal views this as a new attempt and their score for that content is set back to incomplete.
    The reason your LMS jumps from first to last slide quickly is probably due to Resume Data bookmarking.  Captivate 5 and 5.5 didn't implement this very well.  If you want better Resume Data bookmarking, you'll need to upgrade to Captivate 6 with the new Rustici SCORM drivers.

  • LMS 4.2.4 User Tracking Acquisitions Info almost empty

    Hi ,
    I reinstalled lms because I had problems on the server, they are now more than a month that the new use but I have trouble seeing the hosts connected to a switch or rather I see only a few. The settings are identical to the old man all by default, but with the old man had acquired many hosts. I suggested a way to make a little troubleshooting. I attach screensshot.
    Thanks Emiliano
    the old had over 5000 acquisitions

    When a fresh installed LMS is working properly for all the modules, like Inventory, config, fault, performance etx, it could be something on this module which is responsible for Data collection.
    It doesn't have much data which can be lossed, it can be easily taken as the first step to verify and rule out any possibilites of DB not working properly.
    Also, you can share :
    NMSROOT\campus\etc\cwsi\portsData.xml
    NMSROOT\campus\etc\cwsi\RouterData.xml
    NMSROOT\campus\etc\cwsi\vlanData.xml
    These files have essential entries to be used by User tracking.
    -Thanks
    Vinod
    **Encourage contributors, RATE them. **

  • TinCan not reporting on Instancy LMS provider.

    Has anybody in the community ever used the company Instancy as your LMS provider and had problems with TinCan not working?
    Thanks for any help or TinCan support anybody could provide me with.

    TinCan in Captivate is not properly documented. I haven't heard of its usage as well. As per a comment from Dr. Allen Partridge on this blog post, Captivate just suppports "TinCan in the sense that you can do standard reporting (mirror SCORM reporting) with TinCan format".
    http://blogs.adobe.com/captivate/2013/11/whats-new-and-whats-fixed-in-the-adobe-captivate- 7-0-1-update.html
    Upload your course to SCORM clould and check whether it is giving the expected results (for example, whether it is passing the correct statements). If it is, then you may have to check with your LMS vendor.
    Sreekanth

  • IE Streaming/Progressive Download Video Problem

    I have a e-learning course with 24 videos and 10 quizzes. It's self-paced, with the quizzes being required. It will eventually be uploaded to a LMS.
    I have problems with the videos skipping/stuttering and the audio being out of sync ONLY in IE 7 and 8. When tested in Firefox and Chrome the videos play correctly.
    It is a recent problem, they course WAS working perfectly in IE, so something changed along the way. And I have tried progressive download versus streaming with the same problem.
    I've watched the videos outside of the course and they play fine. I've also tested the videos in a standalone flash player and they play correctly.
    I'm really at a loss of what could be causing this problem.

    Chrome 18 Flash 11.2.202.229
    Firefox 3.6 Flash 10.3.183.18
    IE 8 Flash 11.2.202.233
    I noticed there was an update to the Flash player on April 11th. My problem is recent, which makes me think the update is the cause.
    I'd like to uninstall Flash on IE and go back to an the previous version. Even if that is the problem, I'm not sure how to fix it.
    I'm testing them on an internet connection to a web server.

  • Managing Cisco Works Logfiles - Problems Running Logrot

    I'm trying to run logrot to maintain some large LMS logfiles.
    The problem that i'm having is that when I run C:\Program Files\CSCOpx\bin>perl.exe "\Program Files\CSCOpx\bin"\logrot.pl -c
    I'm getting the error message
    "C:\Program Files\CSCOpx\bin\perl.exe is not a a valid Win32 application."
    Any ideas?
    Thanks
    Tim

    Sounds like you're corrupted your Perl executable. You will need to either restore this from a file system backup, or reinstall Common Services.

  • SCORM 1.2 tracking Captivate 3 lesson_location

    I have a client who is using Captivate 3 to author a SCORM 1.2 course. When deployed to the LMS we have experienced problems with bookmarking, in that it does not appear to work all of the time.
    On investigating this further using ADL Testsuite to track the data being passed between content and LMS, I was able to establish that a "lesson_location" vary rarely written back to the LMS, even upon Save and Exit. There were a couple of slides and button interactions that trigerred data to be written to the LMS, but upon looking at the author file, there was nothing to suggest why these slides or button clicks should send back data.
    I have 2 questions.
    1: Is it possible to manipulate when data is being written back to the LMS, ie, can I choose when a lesson_location is saved? The solution I am looking for would be one that is native to Captivate 3 and not a custom JavaScript solution as I need to provide it to a non developer a non developer.
    2: What would be the likely cause of the lesson_location being sent to the LMS on the slides and button clicks that it did happen. Understanding this, I hope will help me manipulate it.
    I appreciate any help you can provide on this.
    Thanks,
    Sam

    i HAVE ATTEMPTED TO RESTART CAPTIVATE MANY DIFFERENT WAYS WITH BOOKMARKS....NOTHING SEEMS TO WORK WHEN SCORM
    1.2.
    HERE IS MY COMMUNICATION LOGS:
    Fri May 14 16:48:35 CDT 2010
    LMSInitialize
    LMSGetValue:[cmi.core.lesson_location] value:G0Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enon e%24nPA
    LMSGetLastError: value=0
    LMSGetValue:[cmi.core._children] value:credit,entry,exit,lesson_location,lesson_mode,lesson_status,score,session_time,stud ent_id,student_name,total_time
    LMSGetLastError: value=0
    LMSGetLastError: value=0
    LMSGetLastError: value=0
    LMSGetLastError: value=0
    LMSGetValue:[cmi.launch_data] value:G0Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enon e%24nPA
    LMSGetLastError: value=0
    LMSGetLastError: value=0
    LMSGetLastError: value=0
    LMSGetValue:[cmi.core.lesson_location] value:G0Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enone%24nP1Enon e%24nPA
    LMSGetLastError: value=0
    LMSSetValue:[cmi.core.lesson_status] value=failed
    LMSGetLastError: value=0
    LMSGetLastError: value=0
    LMSSetValue:[cmi.core.lesson_location] value=1
    LMSGetLastError: value=0
    LMSSetValue:[cmi.core.session_time] value=00:00:19
    LMSGetLastError: value=0
    LMSSetValue:[cmi.suspend_data] value=B0Enone%24nP0Enone%24nP0Enone%24nP0Enone%24nP0Enone%24nP0Enone%24nP1Enone%24nP1Enon e%24nPA
    LMSSetValue:[cmi.core.lesson_status] value=failed
    LMSCommit
    LMSCommit
    i HAVE ATTEMPTED TO USE
    cmi.core.lesson_location
    cmi.launch_data
    to place the contents of "cmi.suspend_data" and nothing seems to restart the Captivate 4 with Bookmarks, in continually restarts the course in the beginning.
    Any Help would be appreciated.
    reference:
    RESTART CAPTIVATE COURSE WITH BOOKMARK SCORM 1.2
    RESTART CAPTIVATE 4 COURSE WITH BOOKMARK SCORM 1.2
    thanks,
    Doug Lubey of Louisiana
    www.douglubey.com

  • Captivate LMSFinishissued needs to be reset

    We're in the process of upgrading our LMS. We've noticed that our Captivate programs (mostly Captivate 4....just starting to use Captivate 5) aren't reporting back in the new version as it did in the old.
    According to our LMS Technical Support, the problem is that we need to change our LMSFinishissued setting from 0 to 1. The challenge...they didn't tell me where I can find this value. I've spoken with our most experienced developer, and she doesn't know where to find this setting.
    Any guidance?

    Please repost in the Captivate forum.

  • Stopping Sum Total completed activity popup

    1st time posting and new user of Adobe Captivate 5. Hoping to find some help.
    Here is my scenario.
    I have a Power Point presentation that I have brought into captivate 5.
    The steps I need to accomplish are
    1) Disable the SumTotal player (done through edit of Manifest.xml file.
    2 Have user page through all slides to end.
    3) Captivate send a completion to LMS
    Here is my problem.  As soon as user enters last slide Sum total pops up the "You have completed the activity. Click OK to close the player." button right in the middle of the slide forcing the user to move it to finish reading the slide and then they would need to click OK to close thus generating a completion status in the LMS.
    My publish settings are
    Quiz enabled
    LMS standard SCORM Template default (have also tried the Captivate 4 template i found)
    Manifest version 1.2
    Mastery Score 100
    Reporting Status Complete/Incomplete
    Report to LMS Percent
    Chose Report Data Slide Views Only Slide Completion 100
    Reporting Level Report Score
    LMS Customerization Settings
    Never Send Resume Data checked.
    I really just need the Sum Total box to appear after the last slide or at least set it so that I can control a set time that it appears.
    Thanks

    Whenever I hear someone having issues getting an LMS to work with Complete/Incomplete, suggest they try using Pass/Fail instead.  Call me cynical, but I've seen so many people have problems with getting it to work reliably that I've grown to be very distrustful of Complete/Incomplete as a solution for LMS tracking.
    Also, try testing what happens if you add a scored button on that last slide which the user must click to indicate they've completed the module.  See if adding such an interactive object to the last slide will delay the appearance of that nuisance Sum Total dialog.
    I wish I could get hold of a trial or developer setup for Sum Total and run it on my development machine.  Too many people report issues with getting Captivate to work reliably in Sum Total, yet Captivate content seems to work fine for most other LMSs.  I find this intriguing.

  • Reporting the text entries

    Hi all,
    I want students to write in TEB and I want to recieve whatever they have typed in. I don't want to score them but I assume I have to include the TEB in a quiz to be able to report the entries.
    I use Acrobat.com as the LMS platform, but the problem is that I can not see the entries there.
    I use Captivate 5.0.
    Please is there anyone who could help me with this? it is so urgent.
    Thanks in advance

    Hi Lilybiri,
    Thanks for reply.
    this is the quiz setting. like I said, it is a survery sort of question and I want to retain and report the answers that students enter in the TEB. this is not possible in Acrobat.com , is it? I just need the answers come through us.
    What LMS do you use?
    Many thanks

Maybe you are looking for