LO-VC  Variant Config - update STPO-SANKA field at Plan/Prod Order Creation

Hi All VC Expert,
We are facing an issue with the update by reference characteristic of the field STPO-SANKA Cost relevancy indicator on the BOM.
We are on SAP ECC 6.0 release 700 on Oracle
          Hot Package
               - SAPKA70015 on ERP Cross Application componenent
               - SAPKH60013 on SAP-APPL Logistics and accouting
We are using material variant
We are on the first level of configuration
Classically, we built a procedure to set X to this data base field as below :
$self.STPO_SANKA = 'X'
We assigned this procedure to the relevant items
Here is the result we have:
At the creation of the Plan Order, this is not working
At the creation of the Prod Order, this is not working
When we do a Reload PP master data, this is working very well
On CU50/VA02 when we check the trace,  the procedure is executed.
Do somebody have an idea or already facing this and solve it ?
Thanks in advance for your appreciated help.
Edited by: Fabien MAUPIN on Jan 24, 2012 11:49 AM
I still have issue with this object characteristics. I didn't find Oss note to correct the issue.
Do somebody is facing the same issue as me and find a solution ?
Edited by: Fabien MAUPIN on Jan 24, 2012 11:51 AM

Hi Fabien,
I have series of questions to ask.
1. How are you creating the Planned order or Production Order. Is it created directly in PP module or through the requirement transfer from SD.
2. What do you mean by PP master data.
If you trigger the BOM for the planned order or production order from Sales order and some other reqmt trigger, what is your precondition for updating the cost relevancy indicator.  If you some script some lines of your process, I can check if you should include the $PARENT clause somewhere. I think the problem lies somewhere in the origin of configuration.

Similar Messages

  • Mass updation of Priority field in the process order header screen

    Hi Friends,
    Can any body knows on how to do mass update the Priority field in the process orders after release.(with out upload using BDC).
    or can we update the priority field in process order during mass release of process orders using  T- code: COHVPI?
    Is there any standard transaction? else please tell me the solution if there is any other way of doing this task.
    thanks&regards,
    Purna

    Purnachander,
    Your requirement can not be fullfilled with any standard transaction.
    BDC is best suitable option.
    Hope this helps you.
    SmanS

  • How to update condition value using e1edp05 segment during order creation

    Hi,
    I have a requirement where I need to update the item level condition value (komv-kbeter)  to the condition type (komv-kschl) from the incoming idocs (orders05).
    But  the same is configured  in such a way to populate automatically with the default condition value zero during the order creation level using VA01 at condition tab.
    I am able to populate condition values from incoming idoc using segment E1EDP05 which is good, but it was getting created as new entry with the same condition type  instead of updating the condition value to the existing condition type(which got populated from automatically from configuration) .
    So I want to restrict to one entry instead of two with same condition type. Is there any userexit/gap to restrict automatic population of condition type thru programming or to update with idoc (orders05) value rather than inserting as new row?
    My client doesn’t want to restrict the pricing automation from configuration. So I have to handle through programming level.
    Your  inputs are appreciated

    It doesn't really matter if it's a credit/debit memo, it's the same transaction anyway and pretty much the same functionality. What is your requirement exactly? Do you always have to override the price from Siebel or, let's say, some price is automatically proposed and you might or might not need to override it?
    We use a custom (Z..) condition for price override. When a material is entered in VA01, some price (condition PR00, for example) is assigned automatically. Then, let's say, a special price has been negotiated with this customer just for this purchase. So the user goes into Conditions, types in condition code Z... and types in the new price. This basically annuls the previous PR00 condition. I'm not a functional consultant and can't give you all the config details, but your SD person should be able to help.
    I'm still positive that conditions cannot be removed or changed by IDoc. One thing I would suggest for your situation: do not create ZCD2 condition initially and then just add ZCD2 condition when you receive the data from Siebel. Otherwise it seems that you would have to write a user exit or a requirement to deal with the duplicate conditions.

  • Need exit or Badi for updating Warranty data in IE02 while Prod Order conf.

    Hi All,
    I need a user exit or Badi for updating the Warranty data in IE02(Equipment Master) while production order confirmation(CO15)?
    I need to update the Begin guarantee date from Production order and warranty master type in IE02 while confirming the production order.
    Thanks,
    Sudha

    Hi,
    Are you saying first create notification,then service order
    and then Sales order.
    But the requirement is create notification then sales order and when you go in va02 and while modifying the sales order and create service order.
    Thanks & regards,
    chetan.

  • Wrong user ID appearing in entered by field of planned Maintenance Orders

    Hi,
    Only few planned orders those are generating from maintenance plan (Having order types PM02  and PM05 for QM Inspection plan), Instead of user ID system is being taken a code in entered by field as {IP1020100416 It looks like the combination of IP10 scheduling T-code of Maintenance plan and 020100416 = 16042010 is the created on date of Maintenance order}
    Please advise, what should I do to bring user ID instead of above shown code?

    This is the Batch input : Group name (contains the session name). It is not specific to any user. This is helpful in listing down all the maintenance call objects that the system generated during deadline monitoring.
    In the field Entered by, enter the group name that the system proposes on the initial screen of the date monitoring session.
    IP1019950101 --> All maintenance orders from January 1, 1995
    IP10199501 --> All maintenance orders in January 1995
    This is helpful when background scheduling is activated for Maintenance Plan.
    To View which User was responsible for the Scheduling of the maintenance Plans, View the Transaction IBIPA, give the user name it would list all of the Sessions run by this user and the Group Names for the correponding sessions.
    Edited by: Usman Kahoot on Jun 2, 2010 10:43 AM

  • Update termination error at the time of order creation and chamge?

    Dear gurus,
    Facing an error at the time of creation of order.
    system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
    please treat on priority
    regards,
    krai

    Hi,
    Goto ST22 T.Code and analyse the error.The error message why it is terminated will be displayed here.
    Or go to SBWP T.Code in the user where you got this error and check the inbox.
    It will display why the error is appearing.
    Show the same to the ABAPer and ask them to work on it.
    I think your server may be slow and it will take some time to update the order created by you.But I am not sure.Check the error message.
    Regards,
    Krishna.

  • Update termination error at the time of order creation

    Dear gurus,
    Facing an error at the time of creation of order.
    system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
    please treat on priority
    regards,
    krai

    Hello ,
    "Update terminated " error has two reasongs.
    First is system update  was not active and hence terminated
    For this to check Goto the transaction code SM13  and  check whether the SYSTEM UPDATE is active or not.
    If it is active ,
    Then click on the Option TOBE updated in the status  and execute, then in the next screen you can find some list of documents that are not updated and causing error .
    Click on MODULES in the screen and find the erro which causing this error.
    Most this kind of error will happen if something in the Funcion Module or USER EXIT is missing.
    Please check and revert back if you need further details
    Also check the link
    http://help.sap.com/saphelp_nw04/helpdata/en/e5/de870535cd11d3acb00000e83539c3/frameset.htm
    regards,
    santosh

  • Created by field determined  in sales order creation

    Hi,
    I am trying to integrate SAP with a third party program. Sales orders are created by idocs but I want to differentiate the sales orders created by interface from the orders created in SAP directly. So I created a user id as RFCUSER. I want to show this in the sales order header sales view created by field (VBAK_ERNAM) How can it be automatically determined when a sales ordr created by an idoc. I can not send this information in the idocs as I see?
    Thank you

    Hi,
    You can check it in this path:
    - System / Service for an object / display relations.
    I dont know the tables and programs but if you do a trace surely you will know how to do it.
    Regards,
    Eduardo
    PD: the name of the author is the name of the user ID that run the reports that create the idocs and so on.
    Edited by: Eduardo Hinojosa on Sep 7, 2009 3:45 PM

  • Issue with update of BOM by Variant Config - Cost relevant indicator

    Hi All VC Expert,
    We are facing an issue with the update by reference characteristic of the field STPO-SANKA Cost relevancy indicator on the BOM.
    We are on SAP ECC 6.0 release 700 on Oracle
    Hot Package
    - SAPKA70015 on ERP Cross Application componenent
    - SAPKH60013 on SAP-APPL Logistics and accouting
    We are using material variant
    We are on the first level of configuration
    Classically, we built a procedure to set X to this data base field as below :
    $self.STPO_SANKA = 'X'
    We assigned this procedure to the relevant items
    Here is the result we have:
    At the creation of the Plan Order, this is not working
    At the creation of the Prod Order, this is not working
    When we do a Reload PP master data, this is working very well
    On CU50/VA02 when we check the trace, the procedure is executed.
    Do somebody have an idea or already facing this and solve it ?
    Thanks in advance for your appreciated help.

    Hi Fabien. Did you solve your problem?

  • Fields for Super BOM, Work Center & Super Routing for Variant Config

    hi! gurus,
    Please can you give me mandatory fields & values for Super BOM, Work Center & Super Routing for Variant Config
    thank you

    Hi,
    In the Super BOM you need to maintain the object dependencies.
    Workcenter fields are as usual for other production processes.
    Also you can use search option in the forum to view the threads posted in the past. There are many posts related to variant configuration.
    Regards,
    Senthilkumar

  • Problem in updating PA0028-SBJ fields

    Hello Experts,
           I have a requirement where i need to check for the values of SBJ01 to SBJ30 and based on the values we have to update correspondign WTF fields.
    I tried with Do varying but got lost some where and my code is not working.  pl. help me with a piece of code ASAP. 
    Thanks
    RK

    Hi,
    g_sbj01 is the varible which the value and p0028 is the internal table type p0028.
    check the below code for better understanding..
    Example...
      rp_provide_from_last p0028 '0001' g_begda g_endda.
      IF pnp-sw-found = '1'.
        DO 30 TIMES VARYING g_SBJ01 from p0028-SBJ01 NEXT p0028-SBJ02
                    VARYING g_wtf01 from p0028-wtf01 NEXT p0028-wtf02.
          CASE g_SBJ01.
            when '08'.
              i_final_line-WTFLD = g_wtf01.
            when '09'.
              CONCATENATE i_final_line-WTFLD g_wtf01
                    INTO i_final_line-WTFLD.
        ENDDO. 
      ENDIF.
    OR
    loop at p0028.
        DO 30 TIMES VARYING g_SBJ01 from p0028-SBJ01 NEXT p0028-SBJ02
                    VARYING g_wtf01 from p0028-wtf01 NEXT p0028-wtf02.
          CASE g_SBJ01.
            when '08'.
              i_final_line-WTFLD = g_wtf01.
            when '09'.
              CONCATENATE i_final_line-WTFLD g_wtf01
                    INTO i_final_line-WTFLD.
        ENDDO. 
    ENDLOOp.

  • How to find variant config material changes

    Hi!
    I have a requirement to compare variant config material under an equipment sales order. Scenario is:-
    Suppose company has sold one product and that product is variant configured. Under configuration tab user has selected different characteristics and because of that characteristics some materials has come under that config material in sales order. Suppose customer has returned that material after some time and now I have to create a follow on return order. My requirement is , I have to check that if that configured material has been changed now (depending upon same characteristic values ) or not. May be that configured material is now having one more component material added that is priced now and that configuration product price has been changed because of that new added component .
    Is there any way I can compare that configured material in sales order with regards to todays date. (Depending upon characteristic values) .
    Regards
    Yogesh

    The material documents are NEVER deleted. You can reverse them (MBSM provides a list of reversed documents) but not delete them.
    You can delete the delivery, then the VBFA is cleared but in MKPF table a trace of this still stay in field MKPF-XBLNR that contains the deleted delivery number.
    Regards
    Roberto

  • Variant config - Two Varinat class to single material

    Hi
    I had defined two variant classes eg: Class1 & class2 and assigned it to material in clasiification view.
    While sales order the systems take me to variant config screen which shows charateristics of both the class combined. I need to display separately .
    How can do this ? please help
    regards
    Arun prasad

    Some light on Variant Configuration in Detail.
    The procedure is as follows:
    Create a Material - KMAT type with Item category (002)
    Create Charateristics in CT04 - Zbike, where in values mention the Color of the bile like Red, Blue etc
    Create another characteristics in CT04 - ZPrice, where directly go the additional data tab and maintain the table SDCOM and field VKOND (ABAP Dictionary it will ask for)
    Assign these two characteristics to a Class in CL01 - ZBikeclass ( Type 300) in characteristics tab page.
    Then go to CU41 Configuration profile select the material and enter the description click on the class assignment ie assign Zbikclass.
    Now go back to CT04 - enter Zbike -go to values- select Red- go to extras - Other Dependencies - Select Procedure enter in front 10 write - $self.ZPrice='Red' and save
    Now go back go to extras - Other Dependencies - assignments and assign relationship ( by default it will come just save)
    Now select Blue- go to extras - Other Dependencies - Editor - Select Procedure enter in front of 10 write - $self.ZPrice='Blue' and save
    Now go back go to extras - Other Dependencies - assignments and assign relationship ( by default it will come just save)
    Now go to VK11 - Enter VA00 (Condition)(For Std RVA001 Pricing Procedure) - enter variant Red and Blue give the rates accordingly and create the sales order.
    regards
    Satish

  • Variant config in MM

    Hi,
    I need to map VC in MM side, i have went thru the blw link... where i need to work out on PO i.e how the characteristic values transferred from Sale order to PR and PO.
    Re: Variant config in MM
    rgds
    Jay

    Hi,
    For variant config. in MM you have to use the comunication structure as MMCOM in additional data for charactoristics.
    to configure follow the steps :
    u2022     Create a Material - KMAT as Material Type with Item Category - 0002 by using TCode MM02
    u2022     Create Charateristics using TCode CT04 - Zbike, where in values mention the Color of the bile like Red, Blue etc
    u2022     Create another Characteristics using TCode CT04 - ZPrice, where directly go the additional data tab and maintain the table MMCOM and field VKOND (ABAP Dictionary it will ask for)
    u2022     Assign these two characteristics to a Class using TCode CL01 - ZBikeclass (Type 300) in characteristics tab page.
    u2022     Then go to Configuration Profile using TCode CU41 select the material and enter the description click on the Class assignment, i.e., assign Zbikclass.
    u2022     Now go back to Characteristic using TCode CT04 - enter Zbike -go to values- select Red- go to extras - Other Dependencies - Select Procedure enter in front 10 write - $self.ZPrice='Red' and save
    u2022     Now go back go to Extras - Other Dependencies - Assignments and Assign relationship ( by default it will come just save)
    u2022     Now select Blue- go to Extras - Other Dependencies - Editor - Select Procedure enter in front of 10 write - $self.ZPrice='Blue' and save
    u2022     Now go back go to Extras - Other Dependencies - Assignments and Assign relationship ( by default it will come just save)
                         Create a condition type ( e.g. ZVAR) with variant condition tick.
    u2022     Now go to Condition Record using TCode MEK1 - Enter ZVAR (Condition)(For created  Pricing Procedure which contains the defined condition ZVAR) - enter variant Red and Blue give the rates accordingly and create the purchase order.
    In the material tab new button will appear for configuration-- here you select the variant value ( value for the charactoristics - e.g. 'Red') - press enter and come back.
    Check the pricing in condition tab.
    Br,
    Satish

  • Variant config billing error

    Experts!
    I am very new in SD variant config. I managed to setup and get the pricing
    matrix working. But I am stuck with generating invoice. When I try to generate
    invoice, error message "000010 The item is not relevant for billing"
    I have done the following:
    1. Account assignment, I have created the access key by customer by account key
    2. In SE11, I extended the structures for KOMCV and KOMPCV for variant key field
    VARCOND account determination.
    3. Document type billing copy control ZOR to F2.
    What are the possible cause and what else do I require to setup in order to
    generate invoice and post to finance?

    Chidam,
    Ok, I got it.  The item cat was not set to billing related.  I changed to billing related and billing was generated but still cannot post to FI, no accounting document generated.  I think maybe it's related to FI profitability analysis.  I will check with FI guy but this guy is only back tomorrow.  By the way, do you know what's require to setup??
    Also I noticed the pricing condition description are all the same.  This is a bundle price and goes to different GL account.  I just enter the package material code e.g. IT services and it will compute all the pricing condition:-
    Computed
    ZZ1 IT project  $10
    ZZ2 IT project  $20
    ZZ3 IT project  $30
    The correct description should be:
    ZZ1 IT consultation  $10
    ZZ2 Servicing          $20
    ZZ3 Documentation $30
    Anything I missed out?
    Any idea how to set the

Maybe you are looking for