Variant config billing error

Experts!
I am very new in SD variant config. I managed to setup and get the pricing
matrix working. But I am stuck with generating invoice. When I try to generate
invoice, error message "000010 The item is not relevant for billing"
I have done the following:
1. Account assignment, I have created the access key by customer by account key
2. In SE11, I extended the structures for KOMCV and KOMPCV for variant key field
VARCOND account determination.
3. Document type billing copy control ZOR to F2.
What are the possible cause and what else do I require to setup in order to
generate invoice and post to finance?

Chidam,
Ok, I got it. The item cat was not set to billing related. I changed to billing related and billing was generated but still cannot post to FI, no accounting document generated. I think maybe it's related to FI profitability analysis. I will check with FI guy but this guy is only back tomorrow. By the way, do you know what's require to setup??
Also I noticed the pricing condition description are all the same. This is a bundle price and goes to different GL account. I just enter the package material code e.g. IT services and it will compute all the pricing condition:-
Computed
ZZ1 IT project $10
ZZ2 IT project $20
ZZ3 IT project $30
The correct description should be:
ZZ1 IT consultation $10
ZZ2 Servicing $20
ZZ3 Documentation $30
Anything I missed out?
Any idea how to set the

Similar Messages

Variant config

Hi gurus
cofniditon type va00 is manadatory or manual conditon in prcing procedure. Can any one suggest me. When i am maintaining in conditon records for the condition type va00 is not coming the it showing messege variant not found. So that price is not coming in sales order. Please help me in this regard
Points will be rewarded

Dear rack,
VA00 is a condition record maintained for variant config material. So if your material is not under variant config the error will come. you can delete that line if you dont have a variant material.
Regards,
Sudhir

Variant configuration-- syntax error in creation of object dependencies

In variant configuration when i try to create object dependency (tcode=cu01), after entering the dependency and also description when i enter the syntax in the source code it is giving error: error in syntax check for simple condition
I have entered syntax as : engine_cap in ('1000','1400','2000'), pls guide me with the solution to create object dependency

Dear, Shakeer
Please follow along with my very own config guide of variant config.
1)     Create a configurable Material Using KMAT u2013Material Type. Item Category 0002 and Item Category Group 0002. Go to classification tab-here you maintain the class type 300 and assign the class, we will create this shortly. (So after creating class come back into MM02 and input the class that you create in step 2.)
2)     Create a class in T-Code CL01. Use class type 300 for Variants. In this we assign the characteristics we will create shortly.
3)     Create characteristics in T-Code CT04. Create your characteristic like for example, Z_Type, Z_Model, and Z_Color.
4)     We must create a characteristic for the pricing. Example, Z_CarPrice inside this characteristic we must maintain. Table Name SDCOM, Field Name VKOND in the additional data tab. Also, go to restrictions tab and enter the class type 300 Variants. Now in order to make this pricing work for you, you must maintain (enter) all the values from the characteristics. For example, Red, Blue, Black, Honda, Toyota, GLI, XLI, and 2.0D.
5)     Now going back to the characteristics in CT04 change mode. Make sure Basic Data has *Multiple Selections circled. * Character Format has 26 and a check in case sensitive. Make sure in restrictions tab class type 300 Variants is present. Go back to Values and highlight the first one. Example, Red then go to Extras->Object Dependencies->Assignments You must maintain this code $self.Z_CarPrice=u2019Redu2019 in basic data make sure itu2019s released & procedure is filled in. Go back to dependency editor and paste the same code there after 000010 $self.Z_CarPrice=u2019Redu2019 and do this for each and every value. Very Important * Maintain configuration profile in T-Code CU41 for the material -> Priority 01, Variant Configuration, Class 300, status, Released 1, then click save. Note: If 2 conditions are inactive use class group A instead of B in SPRO for Condition type VA00.
6)     Go to T-Code VK11 and enter VA00 condition type. Enter all the values maintained in the characteristics for example, Red, Blue, Black, Toyota, Etc and enter the price then click on save. Now it should work fine in VA01. Make sure you have assigned the VA00 condition type in the pricing procedure.
Good Luck,
Muhammad Ali Lozada

Text item cateory for variant config item

Hi,
I'm trying to create a text type item category for a variant config item. I tried to use the std TEXT but it doesn't work possibly coz its a variant config item. The item category grp assigned to this item is 0002. I used ZVAC and removed relevant for delivery n billing as I don't wnt this item to b relevant for either or even appear in either of those. But it still doesn't work. When i create the order and enter the item and hit enter, it takes the default item category grp for that order type (TEXT item category is added in manual item category field) and it grays out. I cannot make any changes to this item category although the order has not even been saved yet.
Has anyone done any such config or know anything abt it? Pls help.

0002 is basically for single-level configuration. So right there you are probably getting the issue, as well as using the standard TEXT item categoty..
0004 is for multi-level config, which is, I guess, what you are looking for.
But you will also want some other "Z__" item category defined for what you are looking for - don't use TEXT. I know, then it's a pain 'cuz you have to do all the copy control, but you really need to.
Now with your new "Z__" make it Non-pricing-delivery-rqmts-picking-delivery-billing-etc.
It's lots of fun, isn't it !

HT3702 I have put 25 pound on my iTunes account but when I try to buy something it says billing error and goes to my visa card account and says payment declined but I have 25 pound in my iTunes account can someone help?

I have put 25 pound on my iTunes account but when I try to buy something it goes to my visa account and says billing error payment declined but I have 25pound in my I tunes account why can't I use the money in my I tunes account ?

If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account.

BAPI_SALESORDER_CREATEFROMDAT2 is not carrying out pricing for variant config materials

Hi Guys
I need to create a BAPI to create sales orders coming in through a web service from an external system, for normal materials all works well, but for variant config materials the pricing is not happening, like the way it does when I manually create an order, I don't want to manually pass the pricing condition in BAPICOND as I want the BAPI to dynamically determine the conditions from the access sequence.
While debugging VA01 I found that the control goes to the 'PRICING' function module twice, ones for the main material , and next for all its config materials, the second time it calls the 'PRICING' fm with pricing type 'O'. Here it selects the price for all the variant materials and loads into an internal table vkomv and displays in VA01 the variant materials that we select while creating the order, but in the case of the BAPI call, the control is going only to the 'PRICING' fm call for the header.
I have passed 'V' in the application parameter and the variant material in the varcond parameter of the BAPICOND structure.
Any idea what I might be missing ??
Thanks
Sameer

Solved by reading the following OSS notes
562124 Configuration change via
549563 BAPI: Filling the configuration structures
567348 – Fill configuration via BAPI

Windows LV6.0 running on Linux Wine: config.cpp error (line 404)

Have anyone tried to run LabView (Windows version) under Linux using the Wine "emulator"?
Trying this on Debian Woody, with a Win98 install of LabView 6.0 returns:
config.cpp error (line 404)
I tried to search for such a file on both Win/Linux partitions: there's none.
So how am i gonna check this line 404?
Any clue would be strongly welcome!

I agree with Labviewguru about getting Labview for Linux. The only
problem is that you have to dish out $2000 or $3500. They don't have a
Base package.
I'm not sure if NI recomends a particular window manager but I do know it
will run on any of them. In an extreme case I used it on a PII 233MHz,
64MB ram, and a 300 MB disk. It was a Slackware distro using the fvwm2
window manager. Ran great. Presently I run it with Gnome.
My point is that if you have to buy a LV for Linux license, at least you
can save money buy putting it on a machine that's been used as a paper
weight for several years.
-kevin
In article <[email protected]>,
"Labviewguru" wrote:
> I don't believe you can run LabVIEW in an e
mulation environment. There
> is too much system control that LabVIEW needs a handle on to be able to
> run on an emulator.
>
> The reason you are not able to find and troubleshoot that file is
> because it is part of the source code for LabVIEW, and doesn't exist
> except in a super secret vault which may or may not be located in Austin
> Texas...
>
> Are you aware that there is a version of LabVIEW for Linux? I believe
> that they recommend running KDE or similar GUI, but check on the support
> website for that at ni.com/linux.
>
> I hope that was enough of a clue...

I went to comand R, turned off the system to format and reinstall when I put in the Mac OS Lion I downloaded the Apple Store to a billing error in the account, now I'm no OS, what should I do?

I bought the OS Lion in apple store, I downloaded and installed, it happens that wanted to erase everything and reinstall the OS, I went with the comand + R, reinstall Mac OS Lion, but when he arrives at the apple to put the id is a billing error in the account,now my macbook is no OS

Try here > Apple - Support - Lion - Installation and Recovery
To edit payment information for your account click Account under Quick Links right side of the App Store window.
Then click Edit to the right of Payment Information.

How to find variant config material changes

Hi!
I have a requirement to compare variant config material under an equipment sales order. Scenario is:-
Suppose company has sold one product and that product is variant configured. Under configuration tab user has selected different characteristics and because of that characteristics some materials has come under that config material in sales order. Suppose customer has returned that material after some time and now I have to create a follow on return order. My requirement is , I have to check that if that configured material has been changed now (depending upon same characteristic values ) or not. May be that configured material is now having one more component material added that is priced now and that configuration product price has been changed because of that new added component .
Is there any way I can compare that configured material in sales order with regards to todays date. (Depending upon characteristic values) .
Regards
Yogesh

The material documents are NEVER deleted. You can reverse them (MBSM provides a list of reversed documents) but not delete them.
You can delete the delivery, then the VBFA is cleared but in MKPF table a trace of this still stay in field MKPF-XBLNR that contains the deleted delivery number.
Regards
Roberto

How can I get a credit card re-instated with ITunes/Apple Store? It was blocked due to an ITunes billing error. Called customer (lacking in) service, but they were no help!

How can I get a credit card re-instated with ITunes/Apple Store? It was blocked due to an ITunes billing error. Called customer (lacking in) service, but they were no help! The rep emailed that I had to get a new credit card No way.... --PB

Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
Regards.

Aspnet_compiler web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'

My latest MVC 5 project built with VS 2013 compiled and works fine on my PC but can not be published to server using command line aspnet_compiler. I kept getting the web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'
In my web.config file, I have the following as suggested by many for solution:
<add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<add assembly="System.Data.Entity.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
However, the error is persisting. I have no clue how to fix this. Hope someone can help.

Hello FredVanc,
As you mentions, it could work with your develop environment, so I am wondering it is that on the server machine, the assembly is not there actually. Here are some information I found which might be helpful:
https://support.microsoft.com/en-gb/kb/958975?wa=wsignin1.0
https://social.msdn.microsoft.com/Forums/en-US/1295cfa8-751b-4e9b-a7a7-14e1ad1393b6/compiling-error?forum=adodotnetentityframework
By the way, since this issue is related with ASP.ENT project, I suggest that you could post it to the ASP.NET forum, there are web experts will help you:
http://forums.asp.net/
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Billing error: "Division" information missing

Hi gurus,
I need your help/guidance, please!
When I am billing a sales order (VA01), I am getting an error: FI accounting document has not been created, because the "Division" value is missing.
I have checked the sales order, and all the "Division" fields have the right information.
I can´t see any "empty" field in sales order..
Do I need to do any parametrization in FI?
Can you guys help me on this, please?
Where can I find this "Division" field with the missing value?
How can I sort this problem?
ANY GUIDANCE / LIGHT ON THIS WILL BE GOOD!!
Thank you!!!!
Kind regards
S.

The error code is "ZI004".
While your subject says Billing error, you have indicated that the error is in sale order.
Coming to the issue, this is not a standard one. Control has been impleted through some exit in such a way that you should have a valid tax code for the combination of a selected Division and this is only my guess. Take the help of ABAPer and redo the process in debug mode so that you will come to know what exactly the issue is.
thanks
G. Lakshmipathi

System config network error while parsing /etc/hosts

I am configuring RAC on Oracle Linux,i have configured /etc/hosts on both nodes,when ever i opened network, its displaying error message.
system config network error while parsing /etc/hosts
wrong ip on line 25
wrong ip on line 26
wrong ip on line 27
here is my host entries.
node1
====
[root@racnode1 ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
#::1 localhost6.localdomain6 localhost
#####Public#####
192.168.1.101 racnode1.reg.com racnode1
192.168.1.102 racnode2.reg.com racnode2
192.168.1.103 racnode3.reg.com racnode3
192.168.1.104 racnode4.reg.com racnode4
####Private######
10.10.1.1 racnode1-priv.reg.com racnode1-priv
10.10.1.2 racnode2-priv.reg.com racnode2-priv
10.10.1.3 racnode3-priv.reg.com racnode3-priv
10.10.1.4 racnode4-priv.reg.com racnode4-priv
#####Virtual#####
192.168.1.201 racnode1-vip.reg.com racnode1-vip
192.168.1.202 racnode2-vip.reg.com racnode2-vip
192.168.1.203 racnode3-vip.reg.com racnode3-vip
192.168.1.204 racnode4-vip.reg.com racnode4-vip
#SCAN
#192.168.1.301 racdb-scan.reg.com racdb-scan
#SCAN
192.168.1.301 racnode1-scan.reg.com racnode1-scan
192.168.1.302 racnode2-scan.reg.com racnode2-scan
192.168.1.303 racnode3-scan.reg.com racnode3-scan
[root@racnode1 ~]# hostname
racnode1.reg.com
[root@racnode1 ~]#
node2 host entries
===========
[root@racnode2 ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
#::1 localhost6.localdomain6 localhost
#####Public#####
192.168.1.101 racnode1.reg.com racnode1
192.168.1.102 racnode2.reg.com racnode2
192.168.1.103 racnode3.reg.com racnode3
192.168.1.104 racnode4.reg.com racnode4
####Private######
10.10.1.1 racnode1-priv.reg.com racnode1-priv
10.10.1.2 racnode2-priv.reg.com racnode2-priv
10.10.1.3 racnode3-priv.reg.com racnode3-priv
10.10.1.4 racnode4-priv.reg.com racnode4-priv
#####Virtual#####
192.168.1.201 racnode1-vip.reg.com racnode1-vip
192.168.1.202 racnode2-vip.reg.com racnode2-vip
192.168.1.203 racnode3-vip.reg.com racnode3-vip
192.168.1.204 racnode4-vip.reg.com racnode4-vip
#SCAN
#192.168.1.301 racdb-scan.reg.com racdb-scan
#SCAN
192.168.1.301 racnode1-scan.reg.com racnode1-scan
192.168.1.302 racnode2-scan.reg.com racnode2-scan
192.168.1.303 racnode3-scan.reg.com racnode3-scan
[root@racnode2 ~]#
i am not able to ping racnode1-priv or racnode2-priv.
from node1:
========
[root@racnode1 ~]# ping racnode2-priv
PING racnode2-priv.reg.com (10.10.1.2) 56(84) bytes of data.
From racnode1-priv.reg.com (10.10.1.1) icmp_seq=2 Destination Host Unreachable
From racnode1-priv.reg.com (10.10.1.1) icmp_seq=3 Destination Host Unreachable
From racnode1-priv.reg.com (10.10.1.1) icmp_seq=4 Destination Host Unreachable
5 packets transmitted, 0 received, +3 errors, 100% packet loss, time 4002ms
, pipe 3
[root@racnode1 ~]#
from node2:
=======
[root@racnode2 ~]# ping racnode1-priv
PING racnode1-priv.reg.com (10.10.1.1) 56(84) bytes of data.
From racnode2-priv.reg.com (10.10.1.2) icmp_seq=2 Destination Host Unreachable
From racnode2-priv.reg.com (10.10.1.2) icmp_seq=3 Destination Host Unreachable
From racnode2-priv.reg.com (10.10.1.2) icmp_seq=4 Destination Host Unreachable
--- racnode1-priv.reg.com ping statistics ---
4 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2999ms
, pipe 3
[root@racnode2 ~]#
any idea where configuration went wrong.
Thanks

here is output, i can see lot of additional characters.
[root@racnode1 ~]# cat -vet /etc/hosts
# Do not remove the following line, or various programs$
# that require network functionality will fail.$
127.0.0.1 localhost.localdomain localhost$
#::1^I^Ilocalhost6.localdomain6 localhost$
$
#####Public#####$
192.168.1.101 racnode1.reg.com racnode1$
192.168.1.102 racnode2.reg.com racnode2$
192.168.1.103 racnode3.reg.com racnode3$
192.168.1.104 racnode4.reg.com racnode4$
####Private######$
10.10.1.1 racnode1-priv.reg.com racnode1-priv$
10.10.1.2 racnode2-priv.reg.com racnode2-priv$
10.10.1.3 racnode3-priv.reg.com racnode3-priv$
10.10.1.4 racnode4-priv.reg.com racnode4-priv$
#####Virtual#####$
192.168.1.201 racnode1-vip.reg.com racnode1-vip$
192.168.1.202 racnode2-vip.reg.com racnode2-vip$
192.168.1.203 racnode3-vip.reg.com racnode3-vip$
192.168.1.204 racnode4-vip.reg.com racnode4-vip$
#SCAN$
#192.168.1.301 racdb-scan.reg.com racdb-scan$
#SCAN$
192.168.1.301^Iracnode1-scan.reg.com^Iracnode1-scan$
192.168.1.302^Iracnode2-scan.reg.com^Iracnode2-scan$
192.168.1.303^Iracnode3-scan.reg.com^Iracnode3-scan$
[root@racnode1 ~]#
from node2:
========
[root@racnode2 ~]# cat -vet /etc/hosts
# Do not remove the following line, or various programs$
# that require network functionality will fail.$
127.0.0.1 localhost.localdomain localhost$
#::1^I^Ilocalhost6.localdomain6 localhost$
$
#####Public#####$
192.168.1.101 racnode1.reg.com racnode1$
192.168.1.102 racnode2.reg.com racnode2$
192.168.1.103 racnode3.reg.com racnode3$
192.168.1.104 racnode4.reg.com racnode4$
####Private######$
10.10.1.1 racnode1-priv.reg.com racnode1-priv$
10.10.1.2 racnode2-priv.reg.com racnode2-priv$
10.10.1.3 racnode3-priv.reg.com racnode3-priv$
10.10.1.4 racnode4-priv.reg.com racnode4-priv$
#####Virtual#####$
192.168.1.201 racnode1-vip.reg.com racnode1-vip$
192.168.1.202 racnode2-vip.reg.com racnode2-vip$
192.168.1.203 racnode3-vip.reg.com racnode3-vip$
192.168.1.204 racnode4-vip.reg.com racnode4-vip$
#SCAN$
#192.168.1.301 racdb-scan.reg.com racdb-scan$
#SCAN$
$
192.168.1.301^Iracnode1-scan.reg.com^Iracnode1-scan$
192.168.1.302^Iracnode2-scan.reg.com^Iracnode2-scan$
192.168.1.303^Iracnode3-scan.reg.com^Iracnode3-scan$
Edited by: Endeca on Apr 7, 2013 10:13 AM

MI31 - Phy Inv. - how to exclude Variant Config Materials

For our Variant Cofiguration Materials (parent materials) we don't have stock to count for the physical inventory (MI31). The company would like to exclude these items from the material selection automatically.
I've looked around in the IMG for material master and in physical inventory but I didn't find anything that looked like a "exclude from Phys Inv." indicator or anything that could be used on one of these materials.
The site could "exclude" the individual material #'s in the selection screen of the MI31 transaction and save a variant or something...but it would have to always be monitored when new materials were created, etc. Company would like to know if there is a configuration setting of some kind that can exclude a Variant Material from the phys inventory run.
Any ideas would be appreciated.
Thanks,
Jason

what is wrong with ACC TO STOCK settings?
Does it exclude to much? more than you expect?
Unfortunatly you have not done anything in your design to distinguish Variant Config Materials from standard materials.
Same material type mean probably the same number range as well.
I have other ways to select, but it depends on the number of materials that are in this material type.
How many do you have in that material type, how many do you want to exclude.
How often will you count?

Accessing Variant config characterisctics during CONDITION BASE formula

Hi,
I would like to access the characteristics values for a variant config during the SD pricing in the order. Since I don't have the batch at that point, how to I read from the variant itself? The document may not even be saved at that point yet.
Any ideas?
Thanks
Leonardo

Hi Leonardo,
You can use reference characteristic to read data from the database table. To do pricing per the values of characteristic you can write object dependencies to set values in pricing. Note 935885 has information reference characteristics you can use. Please review help,sap.com for more information on how these can be set. If you give me an exact example for your requirement , I can guide you with the steps you can use.
Thanks Amber

Variant config billing error

Similar Messages

Maybe you are looking for