Load content in another viewing space... Button..Viewer..Video..Panorama.. Carousel..Dreamw..Flash..

Dear Reader,
I made a site with a custom player to show video. I made my own buttons in Flash. On type showed while hovering over the played video and are used for controlling play/pause - button for homepage and two buttons for the next or previous gallery. The other type are underneath the playing video and let you pick thumbnails whose links were shown in the player window.
First I wanted to use a carousel (Lee Brimelow) for the second type of buttons, but I couldn't integrate these with the rest of the player code (my flash-code knowledge is rather limited).
Later on I wanted to show a panorama wich I only got to work with the Away3D-method. In this case I couldn't integrate it with any other code, so I used Dreamweaver to let a viewer choose thumbnails. One can navigate in the viewer window by dragging in the window, so I left out the other navigation buttons within the player window, mentionned earlier.
Now I am thinking of this concept:
- Button(s) for Homepage and (Next/Previous) gallery;
- Viewer window, with
- timeslider and Play/Pause button integrated in case of a video or slideshow;
- dragging in case of a Panoramic view;
- Carousel for picking a subject that will be shown in the Viewer window.
Question:
- Can I combine these 3 types of the concept as Flash-movies and buttons/carousel in Dreamweaver and still have the carousel control the viewer window?
or:
- Should I do all in Flash and make a personal Flashplayer (like I did before) and study more Flash?
What tutorials could I take a look at? (For instance I found a lot of sites about how to make a carousel. I don't know how to make it control a viewer window (to make it load content in another window or space.)
Greatings,
Richafrost.

Hi,
Just wanted to clarify a few things to try and eliminate what could be causing the problem.
1. You are using rtmps protocol. Do you have SSL certificate configured and port 443 enabled?
2. When you tried playback via the hosted OSMF player was it via rtmps?
3. The standard way the request url is protocol://server-domain-or-IP/fms-app-name/[fms-app-instance-name/][codec-prefix:]file-pa th[filename-extension]. Could you try with that?
I tried to reproduce your issue with simple rtmp prtocol and here are my observations/suggestions :
1.When I first entered the source url I got the error you mentioned : "The video player is in the connection error state." However, when I publish the same .fla again it works fine.
2. When you are placing the on a computer on the same network and running the html in the browser, it might not have permission to access the network. You will generally get a pop-up saying "Flash Player has stopped a potentially unsafe option". In any case, in your Flash player settings manager you can go to the Advanced tab and add the location of the folder containing the swf as a Trusted location and then try to reload the page again. I get the "status bar spin" when the folder did not have permissions.
3. Also, when you try playback via Share Point can you go back to FMS and check if a connection request has actually come to the server. You can check under the access logs in root_install/logs or the application logs under root_install/logs/_defaultVHost_/vod/
Please let me know if this helps.
Thanks,
Apurva

Similar Messages

My website is loading but I get a scroll button to view the page and see only part of my page...

I am using full screen but the website only loads top 1/3 of page. to view the rest I must scroll down to see content. how do I see the entire application/information on my full screen?

YOu restore your phone from your icloud backup.
http://support.apple.com/kb/HT1766

I have a Mac Air. When I go to view any video online (youtube for example)and click on a video, I get the space where the video should play but there is just a black screen and no play button and the video does not start. Any ideas?

I have a Mac Air. When I go to view video online (youtube for example), the screen for the video comes up with a black square space where the video should play. But there is no pay button and the vidoe never starts playing. Any suggestions would be appreciated.

Shockwave and Flash are not the same. Try installing a Flash plug-in. Here's the latest: Adobe Flash Player 11.2.202.183

How to make an alert view without buttons on iphone?

Hi,
I'm trying to create an alert view without buttons. On my iphone application I have to run a process, while the process is running I want to display an alert view with info about the process, and then when the process is done I want to dismiss that alert view.
Any ideas about how to do this?
Thx!

this is what i use. I added in an ActivityIndicator just for looks
UIActivityIndicatorView *loadingInd = [[UIActivityIndicatorView alloc] initWithFrame:CGRectMake(120.0, 90.0, 30.0, 30.0)];
alertView = [[UIAlertView alloc] initWithTitle:@"Loading" message:@"Telling your Mom" delegate:self cancelButtonTitle:nil otherButtonTitles: nil];
loadingInd.activityIndicatorViewStyle = UIActivityIndicatorViewStyleWhiteLarge;
[loadingInd startAnimating];
[alertView addSubview:loadingInd];
[loadingInd release];
[alertView show];
[alertView release];

How to pass a internal table used in one method to another method in a view

hi all,
Is it possible to pass a internal table from one method to another method in a view??
If so , kindly help me.

Hi Bala,
If you want to pass this internal table between different methods of the same view then write the contents of this internal table to a context node of your view using BIND_TABLE. You can then read the contents of this internal table from the other method using the reference of that node & the GET_STATIC_ATTRIBUTES_TABLE method.
However if you want to pass the internal table between methods of different views then create a context node at the COMPONENTCONTROLLER level & then do a context mapping of this node to your local views context in both your views. You can follow the same BIND_TABLE & GET_STATIC_ATTRIBUTES_TABLE methods approach.
Regards,
Uday

InfoPath 2013: InfoPath cannot load the view. The view may have been modified to contain unsupported HTML such as frames.

Hello Folks,
I'm facing a strange behavior of InfoPath 2013 while using with SharePoint Designer 2013 to customize the forms. Whenever i open any SharePoint form to customize it in InfoPath 2013, it gives me error "InfoPath cannot load the view. The view may have
been modified to contain unsupported HTML such as frames."
Just like all other folks, i also assumed that the forms are corrupted and i need to change the extension to *.cab and blah blah blah. But, when i noticed that the error is coming with new list forms, new workflow forms as well then i tried to research on
the issue. Surprisingly, all forms are opening on my colleague's PC but not from my PC. We're using the same server, same SharePoint Production, same SharePoint Development and similar InfoPath. Infact, our system team has prepared both of us in a similar
way. The only difference is OS, where he is using Win 8 and mine is Win 7 Pro.
Therefore, from last 1 week, i've to swap my PC with my colleague if i've to customize or update any form in InfoPath 2013. This is quite bizarre. Can someone let me know what's wrong with this issue?
Regards,
Sohaib
Sohaib Khan

Hi Sohaib,
I'd like to double confirm with you that the issue only occurs to your client machine. Please log on to another machine and see if the issue is related to your account.
If the issue is only related to your machine, I'd recommend you clear InfoPath cache and repair Office program.
Then go to InfoPath > Options > More Options > General > Internet Options > Add SharePoint sites to your trusted sites and disbale protected mode.
http://blogs.msdn.com/b/michael_yeager/archive/2008/07/09/infopath-cache.aspx
http://office.microsoft.com/en-in/infopath-help/repair-office-programs-HA010357402.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

View output button disabled when publishing to pdf

I am using Captivate 4 and must publish all my Captivate files to pdf for distribution throughout my organisation. I have two issues:
1) After publishing to pdf, the View Output button is disabled, and I get the message you must have Adobe Reader 9 or better installed to view
I have Adobe Reader XI installed
I am able to open the pdf from my desktop
I saw elsewhere to try unticking the Zip files output option. Zip files and all other output options are unticked
I have tried publishing using Flash Player 7 (the earliest version available in the Flash Player Version menu) with same result
So the question is, is there some setting I am missing to enable the view output button, or another solution?
2) This wouldn't really be a problem, except some users with Adobe 9 installed are reporting they cannot open the pdfs from their desktop. I thought I would try publishing so that output is compatible with earlier versions of Adobe Reader but can't figure out how to do that.
So, is there some way to publish to be compatible with Adobe Reader 8 or earlier? Also, many users are accessing videos through a terminal server - could that be the problem?
Thanks very much in advance

You aren't printing the PDF. You're printing the spool because the user ID has the print immediately field selected and the GET_PRINT_PARAMETERS picks up that setting. You simply need to blank out the value of TDIMMED in your l_print_parameters
structure...

InfoPath cannot load the view. The view may have been modifed to contain unsupported HTML such as frames.

Hi,
I'm running InfoPath 2013 Designer and I'm experiencing a very annoying bug. Whenever I try to open a Infopath file I get the error, "InfoPath cannot load the view. The view may have been modifed to contain unsupported HTML such as frames."
Sometimes it opens without a problem but most the time I get this error message. The strange thing is that I can create a new form without any frames, save it and then when I go to open it have the same problem. I've tried reinstalling InfoPath but it didn't
help.
Please help!!!
Thanks in Advance,
Mark Elliott
Windows 7 Home Premium 64 bit; Internet Explorer 11; Office 2013 Pro

Has anybody figured this out? I have the same problem. InfoPath 2013 will not open any files from one computer which all work from another computer with the same version of InfoPath so this basically rules out file corruption. (The files are in
a network share). Both computer have InfoPath 2013. If I reboot the computer in question it will sometimes work then goes back to the error.
The only difference between this computer an all the others is that this one has a bunch of Office 2010 updates since it has SharePoint 2010 designer installed, (not office). I did try to uninstall the updates but the problem has not been resolved.
This is the second time this happens. Last time I had to completely remove Office 2013 & SharePoint designer then used the Windows rollback feature and finally reinstall office 2013. Everything worked great until I installed SharePoint 2010
designer then after a few updates the problem resurfaced.
This is really annoying, I cant believe its not happening to more people.
Ben
** Update **
The problem went away although I am not 100% sure why. I decided to provide additional information in case someone has the same issue. I deleted the Digital Certificate that I had previously requested from our domain server. Now suddenly everything
is working. Like I said before, I'm not sure if this was the cause/fix but if you are having the same problem perhaps you can try the same thing and provide some feedback to possibly help others.
I would like to thanks anyone who spent time on this.
**Update**
The problem came back. At this point I suspect either an update or something with Visual Studios 2012. My forms are heavy on custom code so I must be doing something wrong. I doubt it was an update since it would be happening to more people
Again, I am able to open the same file from another computer with the only difference being that the other PC does not have Visual Studio 2012

HT204088 I was billed for a rented movie that never completely down loaded and I never was able to view. How do I get reimbursed???

I was billed for a rented movie that never completely down loaded and I never was able to view. How do I get reimbursed???

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

How modify data one view from another view in Cluster view

Hi,
I have a cluster view which includes two independent maintenance views. These views have not a direct relationship.
If I would append or change or delete records in the first view I want to add or change or delete some records in the second view.
1.
I have tried to use Extended Table Maintenance Events of the first view to modify the second but I cant access to the TOTAL and EXTRACT tables the second view from the fist view.
Is there any way to get access from one view to another using Extended Table Maintenance Events?
2.
I have tried to use the Event 04/VC: Before Saving the Data in the Database of the cluster view. I can access and modify the second view internal table using routines
READ TABLE vcl_struc_tab WITH KEY object = 'ZFIRST_VIEW' INTO structab_wa.
if not structab_wa-UPD_REQU is initial.
 perform VCL_SET_TABLE_ACCESS_FOR_OBJ using 'ZSECOND_VIEW' changing error_flag.
 it_tbl_second = <VCL_TOTAL>.
 loop at it_tbl_second into wa_second.
 wa_tbl_second-vim_action = 'U'.
 modify it_tbl_second from wa_second
 endloop.
endif.
But to save modified entries of the second view to database I have to twice press SAVE buttons.
The first time I have pressed SAVE above routines are executed and modified entries appear only in the second view internal table. The second time I have pressed SAVE modified entries appear in the database.
I would like user press SAVE button only once. How I can do it?
Regards,
Malnor
Edited by: Malnor on Nov 30, 2010 9:11 PM

If I would append or change or delete records in the first view I want to add or change or delete some records in the second view
Without a dependant field how will you perform this operation ?
You have to link the fields in the tables, generate maintenance view, add it to cluster view and do it.

Parameters Unslesct when view report button is pressed

Greetings!,   I'm experiencing a very odd issue with my report. I've created a report that has 3 multi value drop down lists (Location, Program, and Class Standing). I've built all 3 using the same format and
procedures but when I click on select all within all 3 of the parameters and press the View Report button Class Standing and Location unselect all and I'm unable to run the report.Has anyone experienced anything like this before??

Hi Solo01,
According to your description, when clicking on "Select All", some parameter became unselected. Right?
In this scenario, this issue happens when it has space/enter character within parameter. You need to replace them when creating DataSet. Please refer to a similar thread below:
SSRS 2012 multi select parameter not working in
Report Manager
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Airplay mirroring is taking very long to load and is only showing one static view then it crashes

airplay mirroring is taking very long to load and is only showing one static view then it crashes.
I am tring to mirror ipad2. I just upgraded to IOS5. Is it an apple TV problem or an Ipad2 problem?
What should I try to fix the problem?

I think i found the solution. I got mine working.
Reboot the iPad by holding down the Home button and power button at the same time for 6 seconds. The screen will turn black, apple logo will appear, and it will restart.
Then restart the Apple TV. (I just unplugged the power)
Then restart your wireless router. (again, I just pulled the plug on it)
After doing that, i tried the mirroring again, and it worked great. As soon as I turned it on, it appeared on my TV and is working very quickly. (well, everything I do on the iPad is delayed on the TV by half a second)

View Failure - the view failed to load

Hi,
I am working on a master project with several subprojects, and when I published the project, and then go to look at it in PWA i get a warning popup that says "The view failed to load. Press OK to reload this view with the default settings". Pressing OK leads
to the popup showing up again.
As suggested in other threads i tried updating to the October CU but that didn't solve the problem.
Any help is much appreciated!
Makolyte, Software Developer + System/Network Admin

Makolyte,
Since this is master project issue could be related to one or more sub project. How many sub projects do you have?
Can you try to open each sub project separately in PWA?
Another way to narrow down the issue is to publish one project at a time.
Open the master project in Project Pro. Insert a column "Publish"
Set No for all sub projects. Save and Publish master project. Try to reproduce the issue in PWA.
Next set Publish=Yes for 1 project plan and repeat the rest of the procedure. This will help to identify the project plan causing view to failure.
Also if you have access when issue occurs review latest ULS log from the server.
Hrishi Deshpande – Senior Consultant DeltaBahn
Blog | < |
LinkedIn
Please click Mark As Answer; if a post solves your problem or Vote As Helpful; if a post has been useful to you.This can be beneficial to other community members reading the thread.

Clicking on another app I get the video automatically returning to normal screen view

I wonder why, if I put a youtube video in full screen and I click on another app WHILE THE VIDEO IS PLAYING all remain this way. On the contrary, if I first stop the video, clicking on another app I get the video automatically returning to normal screen view... This is very annoying. Is it possible to avoid this?
Thanks

Sorry, Mozilla doesn't support the patent-encumbered and royalty-encumbered H.264 standard, they support the OGG/Theodora and WebM free open source standards.
Microsoft has a H.264 plugin for Firefox, but it is for Windows7 not WinXP or Win Vista. 
http://www.interoperabilitybridges.com/html5-extension-for-wmp-plugin
There may be other H.264 Firefox plugins out there for WinXP, so do a Google search. Or maybe contact support for that DVR security system and see if they know of or have a Firefox plugin.

SSRS: "View Report" button doesn't refresh parameter dropdowns

So many people have asked similar questions about why SSRS report parameters are not refreshed when "View Report" button is clicked and MSDN simply comes back with an answer "work as designed". It's a bad design, period.
Here is my suggestion to Microsoft team who works on SSRS: either add a "Refresh Parameters" button at the end of the last parameter dropdown so users can force reload the parameter list, or add "Reload
Report" after "View Report" button (which should be re-named "Refresh Report" more precisely) to allow user reload the entire report (as if it was Ctrl-F5 is pressed in I.E.), not just to refresh the main report dataset as "Review
Report" button is currently doing.

Hi Steve Liu,
Thanks for your suggestion and you can also submit this suggestion at
https://connect.microsoft.com/SQLServer/
If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the level
of service provided.
Thanks for your understanding
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Load content in another viewing space... Button..Viewer..Video..Panorama.. Carousel..Dreamw..Flash..

Similar Messages

Maybe you are looking for