Load.cpp error

i fail to run my VI and it shows load.cpp line:4081 failure. what happen?

There are number of threads on this error. Here are some:
Failure : "load.cpp", line 4081
Failure : load.cpp in line 4081
failure at load.cpp in line 4081
Is
there a fix yet for error load.cpp line 4081?
They all happen when you try to open in LabVIEW 6.1 a VI, that has some tab controls on its front panel, and that was developed in the student or evaluation edition version 6i.
If you send me the VI that causes the error, I may be able to recover it. You can either post it here, or send it to [email protected]
Zvezdana S.
National Instruments

Similar Messages

Failure load.cpp line 4835 VI runs ok in 6i will not load in 6.1

I have created a rather complex instrument interface in 6i and it works fine. I have recently upgraded to 6.1 professional; the VI will not load and an internal failure occurs in load.cpp on line 4835. Is this a bug, or did I do something incorrect? I tried to do a mass compile, but this fails also. The load seems to have problems with a specific VI, so I removed this VI and was able to load by cancelling attempts to locate. I have tried to re-link the problem VI, rebuild the problem VI in 6.1, modify the diagram so that the problem VI is not used/referenced; none of these worked. Labview generally would crash when I save after making the aforementioned modifications. Note: the problem VIs consist of a globa
l variable, and a case VI that uses the same global variable.
I hope that this information is complete enough to point to a solution. Thank You,
Howard Havlicsek, Acutronic

This is typically a result of having more than 555 controls/indicators on
a front panel. A workaround is to place controls/indicators into clusters
since each cluster only counts as a single UI object. Do this until you
get below the 555 limit. A better ideal in most cases is that you don't
need that many indicators on the front panel where a user has to try and
figure out what he should be looking at. If they are not used often move
them into subVIs and display the subVI front panels as needed.
If this doesn't appear to be the cause of your load.cpp error I would
contact NI tech support at ni.com/ask.
Marcus Monroe

SOS:How to solve "internal fatal error:load.cpp line6345"?

hello,everybody. now i meet with a sharp problem in labview. when i try to save a .vi file in labview, sometimes an error information will happen which is "internal fatal error:"load.cpp", line6345". i have tried almost every way to solve this problem but falied at last.
Can you tell me how to solve this problem? thank u all!

beryllan;
Let us know which version of LabVIEW you are using. After a quick search in here at the Discussion Forums, I found that problems with load.cpp were common in LabVIEW 6, (with special mentions to the Student Edition). If that's your case, try updating LabVIEW here.
Regards
Enrique
www.vartortech.com

Labview 6.0.2 patch does not remove my "image.cpp" error

I have an industrial PC with the following characteristics:
* Sharp LQ10D367 10.4" TFT screen, running a VGA driver (16 colours only option)
* ROBO 608, Industrial SBC motherboard with onboard video driver, from Chips and Technologies, 69000; 2MB onboard video memory
The standard VGA driver is the most recent driver, and in fact the only one available for this hardware.
Labview 5.1 runs without problem on this machine, but when I loaded Labview 6 (with the 6.0.2 patch) it came up with an "image.cpp error, line 4150" every time I tried adding a graph to the front panel. Changing the screen acceleration properties did not make any difference.
Though I have gone back to version 5.1
for the time being, my application would benefit substantially from the current version.
Are there any fixes for this, or is Labview 6 simply not compatible with VGA screen drivers?
Thanks,
Jo

I have LV6.0.2 running on an Arcom SBC with the Chips and Technology 69000
HiQVideo 2MB display chip. This chip is not capable of rendering 3D graphics.
I have noticed the CPU will go to 100% usage if I open a sub-VI panel with lots
of the new 3D graphics on it, as the display chip passes rendering off to the
main processor.
Perhaps you could try replacing the LV6 3D graphics with the older versions
that are available on the Controls pallet. At 16 colors the new graphics look
terrible anyway.
I am running the chip at 1024 X 768 screen resolution and 65K colors with
no other problems.
Regards,
Alan Brause
"Jo" wrote in message news:[email protected]..
> I have an industrial PC with the following characteristics:
>
> * Sharp LQ10D367 10.4" TFT screen, running a VGA driver (16 colours
> only option)
>
> * ROBO 608, Industrial SBC motherboard with onboard video driver,
> from Chips and Technologies, 69000; 2MB onboard video memory
>
> The standard VGA driver is the most recent driver, and in fact the
> only one available for this hardware.
>
> Labview 5.1 runs without problem on this machine, but when I loaded
> Labview 6 (with the 6.0.2 patch) it came up with an "image.cpp error,
> line 4150" every time I tried adding a graph to the front panel.
> Changing the screen acceleration properties did not make any
> difference.
>
> Though I have gone back to version 5.1 for the time being, my
> application would benefit substantially from the current version.
>
> Are there any fixes for this, or is Labview 6 simply not compatible
> with VGA screen drivers?
>
> Thanks,
> Jo

Failure : "load.cpp", line 4081

My main front panel VI will no longer open and I just get the error, Failure : "load.cpp", line 4081.
I am running an Eval version of 6.0.1 and was deciding whether to buy this product for a new project.
Given that I see from this forum that this error has been known for 9 months plus and I've lost a weeks
work I am not so sure.
It occured after I added some tab controls to the front panel, so beware.

Hi RCT,
This error occurs in LV 6.0.1. It seems that it is fixed in LV 6.0.2 and LV 6.1.
One thing you can do is ask NI to delete the insane objects for you. You have to redo your work you have done since the time the VI was correct until it got corrupt.
The other thing you can do is use a copy from a backup and redo the rest of the work.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Failure load.cpp 4081(labview 6.0.1)???????????????

failure load.cpp 4081(labview 6.0.1)???????????????
i work on only one project and this happens from time to time but its boring.i even cant find the logic of the apearing.

This sounds like one of the errors that was fixed in the LabVIEW 6.0.2 update.
I suggest you try loading the update.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Failure : load.cpp in line 4081

I'm working in a new application demo. Yesterday i saved it normally, but today when i tried to open gives me this failure message:
"Failure : load.cpp in line 4081"
I need to recover the file, because i don´t have any backups.
Thank you in advance, regards.
Fede

On Tue, 12 Nov 2002 12:58:08 -0600 (CST), Fede2002 wrote:
>I'm working in a new application demo. Yesterday i saved it normally,
>but today when i tried to open gives me this failure message:
>"Failure : load.cpp in line 4081"
>
>I need to recover the file, because i don=B4t have any backups.
>
I had the same error changing video resolution (developed both in
1280x1024 and 1024x768).
The error has gone returning to the higher resolution.
Try It & let us know! :-)
Bye!
http:\\www.depquest.net

Unable to down load file error 1321?

Unable to down load file error 1321?
Error_Message

Hi grahamg,
Please see my response in your other post: I am unable to download Acrobat message reads Insuffient prileges to modify the file C:\ Program Files [ x 86] Adobe\ Acrobat 11.0\Acrobatwow_exe.
Best,
Sara

Unable to load report error

Hi
This started with an asp.net application which I have been maintaining for several years, on an XP 32-bits box. Alas, the box died, and I have acquired a new Development machine, now with Windows 7/64-bits. I have installed Visual Studio 2010 and Crystal reports (13.0.,9), including runtime for 32 and 64 bits.
I got the "unable to load report" error, and I think I have tried everything I could find on the web related to solving this issue.
Finally I got Down to creating a new dummy asp.net application with a dummy report just displying the text TEST. This report Works fine when run from within VS, but if I deploy it to the web server on the Development machine I also get the unable to load report failure.
I believe this is a configuration issue. The application has run fine for years, I just can't get it to Work on the new development machine.
Please help
Peter

Make sure that process has read / write rights to the %TEMP% folder. Process Monitor may help.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Unable to load GUI error when trying to download newest flash player

I had deleted the older flash player , 10.0.42.34 and tried to download 10.0.45.2. Went to the adobe site, clicked the link for "get adobe flash player" from the ADOBE home page .
Got the "Unable to load GUI" error message, so I just went to the bottom of the download page and installed from this link here
click here to download (fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe)
Is that a legitimate way to download the flash player? I mean it put flash10e.ocx in C:\Windows\System32\macromed\Flash and in the manage add ons and in the add/remove programs version in Vista. Just want to make
fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe
gave me the right and secure flashplayer download.
thanks

Hey habnots, like a lot of things in life, there is the hard way and the easy way. Your way just took longer:-)
Regards,
eidnolb

"Unable to load URL" error when importing VS2008 created WSDL

One of my developers created a simple web service in Visual Studio 2008 that queries a database on our SQL Server 2005. I can view the web service results in a web browser with no problems. I can also pull up the WSDL in the web browser with no problems (http://<ip address>/Service.asmx?WSDL). However, when I try to load WSDL into a Web Service Connection in Xcelsius 2008, I get the "Unable to load URL" error.
I've also tried to use the web service as a data source in Crystal Reports 2008, but I get another error:
Logon failed.
Details: Schema file is invalid
error: src-resolve: element 'schema@http://www.w3.org/2001/XMLSchema' not found
I've seen a post in which it looked like Crystal acknowledged this as a bug in the XML driver used by Crystal products, but it should be fixed in a service pack update. I've got the latest service packs and fix packs installed for both Xcelsius 2008 and Crystal Reports 2008.
I scanned the information being sent/returned to Xcelsius using Fiddler and it looks like the request is getting through and the actual WSDL file is being returned to Xcelsius, so it shouldn't be an authentication issue. It seems like Xcelsius doesn't like the WSDL file for some reason. However, it is automatically generated by Visual Studio 2008.
Any ideas as to how I can get Xcelsius to use this test web service?

Having the same issues here also.
I can see the wsdl file being accessed successfully in the web access log, but Xcelsius v5.3 return "unable to load URL"
Only thing I can guess is that the schema is "untyped"
So, nobody in SAP has a solution?

Plug-in load class error while running portalapp.xml file in NWDS7.0

hi,
im facing a problem in NWDS7.0 while running portalapp.xml file im getting error realted some plug-in load class error.
Even 3 times i have re-installed but still getting same error.
Please help me how to over come this. This is error im getting :
Please open this link with Firefox so that you can able to see error.
http://www.imageurlhost.com/images/jri5lj7lpftu23ejyye0_Error.jpg
Regards,
prasad.

Dear Prasad
Please right click on portalapp.xml > open with > check all the available editors.
Also restore default edition in NWDS. Go to windows > preference > Workbench OR Web editors > click on restore default and Apply and then Ok.
then close the NWDS and open it.
Hope it will helps
Best Regards
Arun Jaiswal

SQL*Loader-925: Error while parsing a cursor (via ocisq)

Receiving the following error message when trying to use SQLLoader (on NT) >>>
SQL*Loader-925: Error while parsing a cursor
(via ocisq)
ORA-00942: table or view does not exist
Trying to use the application for the first time, logon using userid for which sqlplus operates, and the table does exist under the user schema, as owner.
ctl and dat file are correct. Log file gives me no further detail of the errors.
Are there any configuration settings or something required for this app?
Thanks

Thanks Warren. I was concentrating more on the first line of the error.
You are right. The issue was of insufficient privileges. The table did not have all the necessary grants provided.

Failed to load preferences error on upgrade of Anyconnect to 3.0.3054 on my MAC OSX LION 10.7.1

Hi Folks,
Since the upgrade of Anyconnect to 3.0.3054 on my MAC OSX LION 10.7.1, i have been getting
failed to load preferences error. During the upgrade the vpn connection get established, but once
i disconnect and try to connect again its starts bombing on "failed to load preferences". For now
i keep uninstalling anyconnect and reinstall an older version which while autoupgrading to 3.0.3054
is able to connect for the first time. Its getting very painful. Any help from the support team will be
appreciated!

I had the same issue and it is due to corrupted preferences.xml file under /opt/cisco/vpn/profile directory. Easy way to fix is uninstall the client and remove the profile directory under /opt/cisco/vpn. Removing the profile directory requires a root access on MAC OS X.

[bug-report] AI CC for Mac got "loading plugin error" at startup

Enviornment: 2012 late Mac Mini, OSX 10.8.6( English )
Just fresh installed adobe illustrator cc for Mac(Simplified Chinese), which is got "loading plugin error" at startup, even update AI or reinstall it after using adobe cc clean tool.
Finally I found it will be solved by selecting default lanugauge (North America English) at installer. Then I changed my OSX language to S Chinese then installed S_Chinese version AI CC that works without problem.
So, it shows AI got some language compatiabitily bug which is not happen on PS and InDesign (I installed Simplified Chinese version of both them on my english OSX without error)
Plz fix it in next version. Thanks so much.

Can you give this a try, that is try using a seperate boss?
DECLARE_PMID(kClassIDSpace, kIDCStartupShutdownServiceBoss, kIDCPrefix + 10)
Class
                    kIDCStartupShutdownServiceBoss,
                    kInvalidClass,
                              // Implementation of IStartupShutdownService
                              IID_ISTARTUPSHUTDOWN, kIDCStartupShutdownImpl,
                              // Implementation to IK2ServiceProvider to identify the service type as startup-shutdown
                              IID_IK2SERVICEPROVIDER, kLazyStartupShutdownProviderImpl,

Load.cpp error

Similar Messages

Maybe you are looking for