Load data from 0IC_C03 into cummulative target

Hi Gurus,
I'm using 0IC_C03 standard inventory cube.
It contains so much data that makes the reporting impossible.
I want to build a cube/ods with cummulative values of 0TOTALSTOCK and other KF.
I need the value for the last day and the average form the first day fo the month till last day.
This record should be overwritten daily.
In the result I want to keep only one record for every month.
What is, in our opinion, the best way to achieve it ?
I'm thinking of building a new ODS with cumulative KF.
Should I feed it with Inflow and outflow KF or 0TOTALSTOCK from export datasource ?
Is exception aggregation a solution for that ?
When using Inflow and outflow KF how to load initial value of the stock ?
Thanks,
Marek

You can use the Oracle functions in the database to load the XML see the post here:
http://blogs.oracle.com/warehousebuilder/2007/09/leveraging_xdb.html
Cheers
David

Similar Messages

How to load data from Quikbooks into PeopleSoft General Ledger module ?

Folks,
Hello.
My client's data is currently stored in Quikbooks.
After install PeopleSoft FSCM 9.0, I need to load the data from Quickbooks into PeopleSoft General Ledger module. But I don't know how to use PeopleSoft Integration Broker to integrate with Quikbooks.
Can any folks tell me how to load data from Quikbooks into PeopleSoft General Ledger module ?

Hi,
If the data load is one time process, then you can use PL/SQL or datamover to load the data to PeopleSoft application.
If you want to load the data in real time, then you need to create In-bound and out-bound nodes to perform the transaction.
Thanks
Soundappan

Error Occures while loading data from Source system to Target ODS

Hi..
I started loading Records From source system to target ODS.while i running the job i got the following errors.
Record 18211 :ERROR IN HOLIDAY_GET 20011114 00000000
Record 18212 :ERROR IN HOLIDAY_GET 20011114 00000000
sp Please help me in these following Errors..
Thanks in advance,

Hello
How r u ?
I think this problem is at the ODS level, ZCAM_O04 is ur ODS Name.
Could u check the ODS Settings, and the Unique Data Records is Checked or Not ?
Best Regards....
Sankar Kumar
+91 98403 47141

Error while loading data from DS into cube

Hello All
I am getting the below error while loading data from Data source to the cube.
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
Wht am i suppose to do?
Need ur input in this regard.
Regards
Rohit

Hi
Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
If your business is April to March make it as 'V3'
If your business is January to Decemeber make it as 'K4'..
activate your update rules delete old data and upload again....
Hope it helps
Thanks
Teja

Load data from flat file to target table with scheduling in loader

Hi All,
I have requirement as follows.
I need to load the data to the target table on every Saturday. My source file consists of dataof several sates.For every week i have to load one particular state data to target table.
If first week I loaded AP data, then second week on Saturday karnatak, etc.
can u plz provide code also how can i schedule the data load with every saturday with different state column values automatically.
Thanks & Regards,
Sekhar

The best solution would be:
get the flat file to the Database server
define an External Table pointing to that flat file
insert into destination table(s) as select * from external_table
Loading only single state data each Saturday might mean troubles, but assuming there are valid reasons to do so, you could:
create a job with a p_state parameter executing insert into destination table(s) as select * from external_table where state = p_state
create a Scheduler chain where each member runs on next Saturday executing the same job with a different p_stateparameter
Managing Tables
Oracle Scheduler Concepts
Regards
Etbin

Need help to load data from PSA TO deta targets

Hello BW Gurus,
I have done the INIT for 2LSI_11_VAHDR and data target I have selected is OSD_CO3. after doing INIT I realized that I have other two ODS which I want select as data target with same datasource.
My question is
1) Is it possible / recommended to create another infopackage and do the INIT for pending ODS.
2) If I want to add the remaining two ODS in existing
request, can you please suggest me how I can do that.
Thank you very much
Krish

Hi Krish,
I don't think it is necessary to create another InfoPack to load the other two DataTargets(ODS. Instead you can delete the Initialization for source systems from the cube and then delete the same from the InfoPack (scheduler option -->Init for Source system) and then check the other two ODS as Datatargets and then schedule with Initialization option.
Otherwise also you can create IPack for the 2 ODS as datatargets and then do the Init. But i prefer the 1st way unless you have huge data in the cube for the init request.
Hope it helps...
Best Regards,
DMK
*Assign points if it helps...

Import form data - load data from webserver into local Apex Application

Hello Apex-Forum,
I am trying to use apex with Oracle XE for a small hotel reservation software.
Because I have no Oracle Webserver the database runs local. Now I am trying to get the bookings from the website form into my local database.
My question: Is there an easy way to recieve these formulardata by email, web service, as csv,with an db-link from an web mysql db or via UTL_HTTP?
I am not very firm in programming, so I need an easy solution. I think this might be an normal problem, but I found nothing in the forum. My goal is to have a button "refresh" in the application to get the new booking information from the webserver.
Thank you very much for every hint!
Best regards, Moritz
(Sorry for my english )

Hello:
I suggest you take a look at UTL_HTTP. I think it will work for what you want to do. I have provided an example below which retrieves a csv file from a US Fed Govt web site. You can put this block into a page process on your APEX page.
DECLARE
req   utl_http.req;
resp utl_http.resp;
value VARCHAR2(1024);
BEGIN
req := utl_http.begin_request('http://www.ofheo.gov/media/hpi/3q08hpi_reg.csv');
utl_http.set_header(req, 'User-Agent', 'Mozilla/4.0');
resp := utl_http.get_response(req);
LOOP
    utl_http.read_line(resp, value, TRUE);
    dbms_output.put_line(value);   ---- do your stuff with the data retrieved
END LOOP;
utl_http.end_response(resp);
EXCEPTION
WHEN utl_http.end_of_body THEN
    utl_http.end_response(resp);
END;varad

Error while loading data from R/3 into DSO

Hi,
While loading data from 2lis_02_s012 into a DSO the following error occured:
=============================================
Diagnosis
    Updating for the information structure is still activated in client 150
    (and possibly also in other clients).
System Response
    o   It is not possible to upload data in the initial mode.
    o   Generation of the delta update was terminated.
Procedure
    1. Switch off updating in all system clients.
    2. Repeat the relevant activity.
=============================================
Anyone plz help me in solving the issue.
Thanks & Regards,
VN.

Hi VN,
1. Incase you do full update , system will allow you to load without any error.
2. In case you want to do init then
      Lock users
      Stop the update in the system .
      Load init Package
      Start the update
      Unlock users.
      Load delta package.
Hope it helps.
Regards
Mr Kapadia

Data load failed while loading data from one DSO to another DSO..

Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
Sneha

Hi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR

Loading data from APO-BW cube into DP planning area

Hello,
Please explain to me how to load data from an infocube within APO into the DP planning area. So far, I generated the data mart, created the update rules for the DP planning area (cube) and replicated data sources. The problem that I am having is that when I create the infopackage, there is no data targets on the data target tab. How can I get the data targets to display? All the other actions appear to be set up correctly (confirmed by BW experts). Can data be loaded from an APO-BW cube directly to the DP planning area cube?
Thanks

Hi James,
Loading of data from an InfoCube to a Planning Area is done using transaction /SAPAPO/TSCUBE (program /SAPAPO/RTSINPUT_CUBE). You just specify the InfoCube, target Planning Area, Selection condition, Infocube Key Figure to PA KF mapping, etc).
Have you tried this transaction already?
Hope this helps.

Loading data from flat file into 0EMPLOYEE

Dear,
I want to see the <b>'monthly change of numbers of employees'</b> of my company in a BW report.
i want to do this by loading data from a dummy flat file into 0EMPLOYEE and afterwards into cube 0PAPA_C02.
i've searched the whole 'help and service sap' websites but nowhere, i could find a usefull user guide.
Could you explain me how this job needs to be done, are there certain steps that need to be taken?
here are a few of my questions:
1: what fields and data do i have to fill in my flat file?
2: how does the time-dependency of master data of employee work?
3: why do you only have to map 0calday and 0employee from infosource 0HR_PA_PA_1 to the corresponding fields of cube 0PAPA_C02?
4: how is the key figure 0HDCNT_VC filled automathically?
(the activation of cube 0PAPA_C02 and its flow is already done.)
or maybe you know a user guide which explains the whole picture and could you send me its link?
thanks a lot in advance,
Julie de Meyer

Hi,
Employee is master data : You need to extarct data every month.Once the extraction is done , you need rto activate to see the results. Otherwise it will display old result.
You can extract data for 0HR_PA_0 and 0HR_PA_1 cubes also. After that you can do the reporting based on this.
You can try some sap standard BI reports .
Headcount is calculated based on employement percentage which is maintained in infotype 0007 (Planned Working Time). If it is 100 then it is considerd as headcount 1.
you can check .
http://help.sap.com/saphelp_nw2004s/helpdata/en/63/351e3c6a2fc036e10000000a114084/frameset.htm
Regards
Nilesh

Loading data from .csv file into existing table

Hi,
I have taken a look at several threads which talk about loading data from .csv file into existing /new table. Also checked out Vikas's application regarding the same. I am trying to explain my requirement with an example.
I have a .csv file and I want the data to be loaded into an existing table. The timesheet table columns are -
timesheet_entry_id,time_worked,timesheet_date,project_key .
The csv columns are :
project,utilization,project_key,timesheet_category,employee,timesheet_date , hours_worked etc.
What I needed to know is that before the csv data is loaded into the timesheet table is there any way of validating the project key ( which is the primary key of the projects table) with the projects table . I need to perform similar validations with other columns like customer_id from customers table. Basically the loading should be done after validating if the data exists in the parent table. Has anyone done this kind of loading through the APEX utility-data load.Or is there another method of accomplishing the same.
Does Vikas's application do what the utility does ( i am assuming that the code being from 2005 the utility was not incorporated in APEX at that time). Any helpful advise is greatly appreciated.
Thanks,
Anjali

Hi Anjali,
Take a look at these threads which might outline different ways to do it -
File Browse, File Upload
Loading CSV file using external table
Loading a CSV file into a table
you can create hidden items in the page to validate previous records before insert data.
Hope this helps,
M Tajuddin
http://tajuddin.whitepagesbd.com

Load data from an infocube into other infocube

Hi guys....i try to load data from an infocube to other infocube.....i generated the infosource for export without problems i can visulize the datasource in my BW System assigned well...but how i can run the extraction from one infocube into the other?
I view that in ODSs there's an option to run load of data into datatargets but in the infocube i can´t find this option......
is there anything else to do?
Regards

The Infosurce and Datasource was linked automatically i can see this in Source System Myself but i can´t see it in Infosources Tab and i can´t create a Infopackage....that´s my problem

How to load the data from informatica into bw & how to report the data

Hi friends,
how to load the data from informatica into bw & how to report the data
using cognos.(i.e how to access the data in sap bw using cognos 8 BI suite).
Thanks,
madhu.

Inorder to report BW data into Cognos you can extract data from using Open Hub to the DB table from which Cognos reads.
For BW informatic integration refer following docs:
http://www.aman.co.il/aman/pfd/DataInteg_BR.q103cd.pdf.pdf
http://h71028.www7.hp.com/enterprise/cache/3889-0-0-225-121.html
http://devnet.informatica.com/learning/ePresentations.asp
http://72.14.203.104/search?q=cache:C741L86Q19oJ:devnet.informatica.com/showcase/resources/Essbase_DataSheet.pdfinformaticapowerconnect(BI)&hl=en&gl=in&ct=clnk&cd=3
http://www.informatica.com/customers/utilities_energy/fpl_group.htm
http://www.informatica.com/solutions/resource_center/technote_sapbw_65241004.pdf#search=%22Informatica%20to%20Bw%22

Load data from XML files into BI

Hi All,
Can any one guide me through the steps which involve in loading data from XML files into BI?
Thanks
Santosh

Hi James,
I have followed upto step No: 12 .
Please could you let me know how to link the XML file on my local drive to BI,
I am not able to find figure out where to specify the path of the XML file to be loaded into BI.
Thanks In Advance
Regards,
San
1. Create a Infosource(ZIS), with transfer structure in accordance with the structure in the XML file. (You can open the XML file with MS Excel.This way you can get to know the structure).
2. Activate the transfer rules.
3. After activation ;from the Menu Bar , Select Extras>Create BW Datasource with SOAP connection.
4.Now Activate the Infosurce again, this creates an XML based Datasource(6AXXX...)
5.These steps would create two sub nodes under the Infosource(ZIS).
6.Select Myself system and create a data package and execute it run in Init mode(without Data Transfer).
7. This would create an entry in RSA7(BW delta Queue)
8. Again create another Delta Infopackage under it, and run it. Now the Datasource(6AXXXXXX..) would turn green in RSA7.
9.In Function builder(SE37) select your FM( do a search ,F4, on the datasource 6AXXX....) .
10.Inside this RFC based FM , from the Menu Bar select Utilities>more Utilities>Create Web services>From Function module.
11.A wizard will guide you through the next steps .
12.once this is done a Web serrvice would be enabled in WSADMIN. Select your FM and execute it.
13.From here you can upload the data from XML file into BW delta queue.
Edited by: Santosh on Nov 30, 2008 2:22 PM

Load data from 0IC_C03 into cummulative target

Similar Messages

Maybe you are looking for