Load data from ODS 3.5 to Info Cube 7.0 ?
Hi BI Experts
I am new to BI 7.0 , my requirement is i want to load the data from ODS 3.5 to Info Cube 7.0
Is this Possible to load from old version to new version?
If Possible please let me the steps
Thanks in advance
Hi there,
ODS 3.5 is just like DSO 7.0 and InfoCube 7.0 is just like InfoCube 3.5
So you can still use the old fashion 3.5 mode with InfoSource, update rules, transfer rules and InfoPackage to the InfoCube, or you can now use a transformation with DTP
Diogo.
Similar Messages
-
Error While Loading data from ODS to Infocube
I am trying to load data from ODS to Infocube thru Update ODS data into data target. My requirement was to take a small subset of fields from ODS and design IC and load the data.
My load fails at Extraction process as I get 0 records from total number of records sent in each package. Please let me know if you need more information.
Please advise.
Thanks,
RRIn Details tab of monitor, in extraction step,
Extraction(messages): Errors occured
Green Light for Data Request Received
Green Light for Data Selection Scheduled
Yellow for 25000 Records sent(0 records received)
Yellow for 25000 Records sent(0 records received)
Yellow for 15000 Records sent(0 records received)
Green Light for Data Selection Ended
Please let me know, If you need more information.
Thanks,
R R -
Error while loading data from ODS to IC.
Hi Experts,
I am trying to load data from ODS to IC using Initial load. I failed first time. Then when I am trying to schedule it again I am getting a error message. I deleted the intial request. Even after that, I am getting the following message. Am I missing something?
Delete init. request
REQU_BQQCBQV5ZK9YEBB416C8QXXLC before running
init. again with same selection
Also can any one provide me a document that contians the lenght of all teh technames? I know I can find it out by looking into each one of the Tech Names. But I would be nice if anyone of you can provide me a document.
Can anyone of you please help me.
Thanks,
Nandini.Hi,
By reading the error:
No transfer structure for InfoSource 8ZYNA_ODS and source system B3TCLNT800
I think the problem is actually with a Datamart. You can try to regenerate the export datasource and activate it.
Also, you can try to activate only the transfer structure again using the report "RS_TRANSTRU_ACTIVATE_ALL".
I hope this helps!
Pietro -
Error while loading data from ODS to CUBE.
Hi friends,
When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
Its is showing like this .
Transfer Rules : Missing Massage.
Update PSA : missing massage.
Processing end : missing message.
I have checked the coding in update rules, everything is ok.
Plz any inputs.
hari
Message was edited by:
hari reddyMight means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
Regards,
Vitaliy -
Error when trying to load data from ODS to CUBE
hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani....... -
Help needed with loading data from ODS to cube
Hi
I am loading data from an ODS to a cube in QA. The update rules are active and definition seems right. I am getting the following error, in the update rules.
"Error in the unit conversion. Error 110 occurred"
Help.
Thanks.Hi Chintai,
You can see the record number where the error occured in the monitor (RSMO) for this data load > goto the details tab and open up the Processing area (+ sign). Try it out...
Also about ignoring the error record and uploading the rest, this is done if you have set Error Handling in your InfoPackage (Update tab), but this would have to be done before the load starts, not after the error happens.
Hope this helps...
And since you thanked me twice, also please see here:-) https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/7201c12f-0701-0010-f2a6-de5f8ea81a9e [original link is broken] -
"Error While loading data from ODS to Target "
Hi All,
I am loading masterdata from ODS to infoobject as data target, I am getting an error message as
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
DataSource 80BP_ID does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 09.08.2006 10:17:24.
The time stamp in the BW system is 15.03.2006 16:44:34.
But we are getting Data till ODS, when we manually load from ODS to infoobject this error is coming up.
Please help in resolving this,
Thanks,
Sairam.You are welcome Sairam
The generated objects are export datasources based on the ODS objects. These are automatically generated because ODS objects are a key component to a data model or datawarehouse strategy where their role is to stage the data for consolidation or harmonization purposes. The generated datasource helps you to load data into further data targets. The use of a cube as an export datasource is not as common, and so the datasource is not automatically generated for them.
Hope this helps... -
Error While Loading Data from ODS to ODS
Hi Experts,
When i'm loading the data from ods to further ods, i'm facing an error while activating the data saying that 0ref_doc_no consists of invalid characters.Also it is saying that Error when assigning SID.
I'm unable to see the long text for further information.
Regards,
VijayHi vijay bhaskar,
first go to RSA1 -> go to datasource -> search for the data source with name "8<old DSO>". Go to dispaly and click on PSA button on top. Now you can see PSA data request. in the bottom left you select error records and display. now you will see all the error records. go through each and every records and see what is the special characteristic in that record and copy that special character in notepad. After collecting all the special characters in notepad, goto RSKC -> paste all the special characteristics from note pad. execute it.
Now, go back to PSA, delete the request from PSA. Schedure the infopackage to load the data. Now, will not see any error like special characteristics.
I hope you understood and can handle your issue.
Assign points if it is helpful.
Reagds,
S P. -
Problem while loading data from ODS to infoobject
Hi guys,
I am facing problem while loading data from <b>ODS to infoobject</b>.
If I load data via PSA it works fine but
if I load data without PSA its giving error as Duplicate records.
Do u have any idea why it is so.
Thanks in advance
savioHi,
when you load the data via the PSA, what did you select? Serial or Paralel?
If you select serial most likely you don't have duplicates within the same datapackage and your load can go through.
Loading directly in the IObj will happen thefore if you have the same key in two different packages, the "duplicate records" will be raised; you can perhaps flag your IPack with the option "ignore duplicate records" as suggested...
hope this helps...
Olivier. -
The error about loading data from ODS to master data.
hi,experts,when I load the data from ODS to master data,there is an error messege:
" InfoSource 8ZPA_0022 is not defined in the source system.
Message no. R3005
Diagnosis
The InfoSource 8ZPA_0022 specified in the data request, is not defined
in the source system.
System response
The data transfer is terminated.
Procedure
In the Administrator Workbench of the Business Information Warehouse,
update the metadata for this source system, and delete the InfoPackages
belonging to InfoSources that no longer existing ."
But,the InfoSource 8ZPA_0022 is not problem,how can I do?thanks.Hi,
as suggested by the message, did you update the meta data by doing a replication of datasources for the source system 'myself'? If not, do so and reactivate the communication structure. Then reload.
regards
Siggi -
How to upload data from POS Workbench to BW Info Cubes and then to SAP R/3
Hi,
I have used some sample data as input to BAPI "/POSDW/BAPI_POSTR_CREATE" to create sample transactions in POSDM.
Then I had executed this data to POS Workbench.
Now my requirement is to upload this data further to Info Cubes and then to R/3 in IDocs format.
Can anyone please tell me the method to how to do this?
Thanks in advance.Hi,
Please see the below links,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/5ef84112f49c39e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0f/7af634b576bc4ee10000009b38f83b/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/b7/b6d59344e93443a7ac8934d2acfb55/frameset.htm
Hope this helps,
Regards
CSM Reddy -
Date load error From ODS to Cube?
Guru's,
Here is a status of data load and suggest me.
Actually we are loading data from ODS to Cube which is full load.This loading is done thorugh process chain and it is loaded for every half an hour.Every time the earlier load will be deleted and next load will be taken to cube.Two days ago the load had gone wrong.When I tried to see cause for the failure in Monitor details I could see Update missing and processing missing.When I see in process chains log view I got info stating some invalid characterstic had appeared.But when I search in PSA the whole of the data packets are green.If there is any invalid characterstics PSA should show a red status.But it is not showing.Please guide me how could I solve this?
point will be definitely awarded for the proper answers.
Thanks in advance.
vasu.Hi Vasuvasu
Once the edit is done and reloade the sata it wont show u the records in Red..
Hope itz Helps..!
Regards
KISHORE M REDDY
**Winners Don't Do Different things,They Do things Differently...!**
> I dont whink this is with Disk space Y because after
> every full load we are deleting data. -
ERROR : "Exceptions in Substep: Rules" while loading data from DSO to CUBE
Hi All,
I have a scenario like this.
I was loading data from ODS to cube daily. everything was working fine till 2 days before. i added some characteristic fields in my cube while i didn't do any change in my key figures. now i started reloading of data from ODS to cubes. i got the following error "Exceptions in Substep: Rules" after some package of data loaded successfully.
I deleted the added fields from the infocube and then i tried toreload data again but i am facing the same error again "Exceptions in Substep: Rules".
Can any one tell me how to come out from this situation ?
Regards,
Komik ShahDear,
Check some related SDN posts:
zDSo Loading Problem
Re: Regarding Data load in cube
Re: Regarding Data load in cube
Re: Error : Exceptions in Substep: Rules
Regards,
Syed Hussain. -
Error while laoding data from ODS to infocube
Hi all,
I am trying to load data from ODS to Cube but its giving error.
I am getting following error
An error occurred while executing a transformation rule:
The exact error message is:
The argument 'Result dependent booking' cannot be interpreted as a
number
The error was triggered at the following point in the program:
GPD5CD2GMGXQYJ77HKMS0C0CQVE 2510
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
o Transformation ID
o Data record number of the source record
o Number and name of the rule which produced the error
Procedure for System Administration.
How to resolve this error, it will be great help if anyone post the stepsThanks Ananda for your suggestion,
CAn you please tell me How to identify which rule has a problem ..is there any way which tell me which rule and which record is creating a problem -
Error During Load Infocube from ODS
Hi guys i hae an infocube and an ODS i load data to the ODS directly from SAP and its OK but i have an error when i try to load data from ODS to infocube, i`ve created an update rule from ODS to infocube theres an error in the load request "Load Request is invalid" i try to load to infocube from ODS in many ways Full, Init Delta but i have the same error in all of them.....i need to do something before or i need to change in any way the data targets.....
I hope somebody could help me with this.......HI,
Activate the data in ur ODS. Then right click on ur ODS n choose "create export datasource". Now right click ur ODS and go to "Manage" and make sure that the QM status is green and the Datamart status is checked with a green mark. Now carry on the load from ODS to infocube.
Hope this helps...Let me know
Regards,
R.Ravi
Maybe you are looking for
-
Hi, I was forced to upgrade to IOS 6 due to a restore. Since the upgrade, I have lost information, the App store is stuck in update mode, my battery drains in hours and many more problems. Is there a way to go back to the VERY RELIABLE IOS 5? This ph
-
Problems + Itunes no longer works
Hello, I recently used a system optimization tool because my system in running pretty slow. It worked somewhat, but now I am having problems in other area that previously were just fine. For instance, whenever (since the optimization) I open iTunes,
-
Price Difference GL During MIRO
We have a scenario where we receive Invoice for a material (with MAP) after some time of GR for e.g., 10 to 15 days of GR. Mean while we consume some of the stocks already received. When we post invoice (MIRO) with some price changes to PO price, sy
-
SharePoint 2013 Document Conversion from PDF to Word (docx) format
Hello all, I know that SharePoint has the facility to convert documents from Word to PDF using the Word Conversion Service, and I've worked with it in C# using the object model. We have a client request for the opposite process. They have an email-en
-
To Get material group for a particular Plant
HI, I need some info like to find all the materil groups and the related plants for the same. Regards, Ramesh.