Load failure: TREX_EXT_GET_INDEX_INFO Index does not exist

Hi,
One of our load(Trex index details) failed with the error message as TREX_EXT_GET_INDEX_INFO Index does not exist:index=bwp_zxxxcube-union_of_ 2007 Message no. R3299.
In job log, job is finished succesfully. source is BW itself and in process monitor -> Details it say's ' Error occurred in the data selection '. When i checked for the info package selection it was like RFCDEST='TREX_BIA'.
I tried to repeat the step, but it failed again. Any ideas why it failed, and what will be the reason.
Regards,
Vishnu

We also implemented the new data sources ZTCT_DS33 and ZTCT_DS34. While loading the detail data (ZTCT_DS34), we are facing the similar issue - TREX_EXT_GET_INDEX_INFO Index does not exist index=wbp_zwbs_c01-union_of_w 2007. Can you please let us know if you are able to rectify the error.
Thank you.

Similar Messages

Primary index does not exist in database but shows in SE14?

I added a couple of key fields to a Z table and activated it. Every thing went well - adjusted it with SE14 also.
When I checked the Runtime object - it is OK.
When I checked Database Object, it is showing that the Primary Index does not exist in Database but SE14 says that the Priamry Index exists in Database.
Please advise how to correct this. I saw another psoting when I searched per this error message: "Indexes: Inconsistent with DDIC source" . It tells to create this index at Database but need to know the steps.
pl advise.
(reposting here)
Edited by: Venkatabby on Mar 26, 2008 4:05 PM

hi,
To create a index for a table,
go to se11->click on Indexes tab and create a primary index.
Indexes speed up data selection from the database. They consist of selected fields of a table, of which a copy is then made in sorted order. If you specify the index fields correctly in a condition in the WHERE or HAVING clause, the system only searches part of the index (index range scan).
The system automatically creates the primary index. It consists of the primary key fields of the database table. This means that for each combination of fields in the index, there is a maximum of one line in the table. This kind of index is also known as UNIQUE.
If you cannot use the primary index to determine the result set because, for example, none of the primary index fields occur in the WHERE or HAVINGclauses, the system searches through the entire table (full table scan). For this case, you can create secondary indexes, which can restrict the number of table entries searched to form the result set.
You create secondary indexes using the ABAP Dictionary. There you can create its columns and define it as UNIQUE.
reward points if useful.
regards
sandhya

Warning: Index does not exist in database system MSSQL

Hi,
After activating the Index from SE11,
I receive the following Warning:
Index does not exist in database system MSSQL.
What does this mean? Has performance been increased or does the index 1st have to exist in the database system MSSQL?

When you create index at SE11 and you need activate database utility.
utilitities-database utility->then click activate and adjust database.
else you can use SE14 and so that Index will create databse level.
Reward Points if it is helpful
Thanks
Seshu

Index does not exist in database system ORACLE??????

Hi Experts,
I created a Secondary Index in DEV, its fine and the message is,
Index KNA1~Z01 exists in database system ORACLE
I moved it to TEST and there I got the message is like,
Index does not exist in database system ORACLE
So,
1 - Wht I hv to do now? Shuld I see BASIS people?
2- Why its happened like that? Coz of not enough space?
ThanQ.

thanq sudheer,
I got the return code as 4, so Can I go for creation of new request and there by moving to test?
1 - Anyways, so, after Activating Seconadyr Index, Shuld I come back and Do I need to activate the Table also?
or
2- Just activating the index is enough?
thanq.
Message was edited by:
Srikhar

Index does not exist in database system DB6 sap

Hi All
In development system i have added a field into already existing index and activated successfully without any errors or warnings and after transported the TR into Quality system,In Quality system it shows the warning Index does not exist in database system DB6 sap
Thanks
Vamsi

Hi Mohan,
After any change in the existing structure of the table you need to adjust and then activate it.
It can be done using SE14 tcode, please try using this.
Regards,
Mohammed

Index Does Not Exist In Database System MSSQL

Hello,
I have an Index that has this message:
" Index Does Not Exist In Database System MSSQL"
Can someone guide me how to update Index to the database?
Thank you.

Check this thread:
missing primary index
Otherwise, a few more informations would help! Thanks.

Index does not exist in database system DB6

Hi,
Problem : Index does not exist in database system DB6.
I need further explanation why when i transport index from Development Client to Production Client the index is active but does not exist in database system DB6.
So when the cases is occurs i must re-create the index again in Production Level...
Can someone give me some ideas?
Thanks.

Hi,
it might be due to some BUG in RDBMS...
First Check the Secondary index in TEST system
Look at the Transport Number in DEV system, If this is having error, then it will show you the error details also,
If that not moved Properly then you need to create another request for the INDEX and move it again
See the threads with similar problem...
Warning: Index does not exist in database system MSSQL
Index does not exist in database system ORACLE??????
Re creation of database index
Hope it will solve your problem...
Reward Points if useful
Thanks & Regards
ilesh 24x7

[bumblebee] Failed to load module "nouveau" (module does not exist, 0)

Hello my friends,
bumblebee does not work for me. I installed bumblebee, nvidia, nvidia-utils, mesa-libgl, bbswitch-dkms ...
# lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:04.0 Signal processing controller: Intel Corporation 3rd Gen Core Processor Thermal Subsystem (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
00:1f.6 Signal processing controller: Intel Corporation 7 Series/C210 Series Chipset Family Thermal Management Controller (rev 04)
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M] (rev a1)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24)
nVidia 620M at PCIBus 01.00.0
First, nvidia is disabled by bbswitch.
# cat /proc/acpi/bbswitch
0000:01:00.0 OFF
Then I execute the command
# optirun -vv glxspheres
[ 505.314018] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 505.315297] [DEBUG]optirun version 3.2.1 starting...
[ 505.315938] [DEBUG]Active configuration:
[ 505.316203] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 505.316421] [DEBUG] X display: :8
[ 505.316552] [DEBUG] LD_LIBRARY_PATH:
[ 505.316674] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 505.316788] [DEBUG] Accel/display bridge: auto
[ 505.316900] [DEBUG] VGL Compression: proxy
[ 505.317014] [DEBUG] VGLrun extra options:
[ 505.317126] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 505.317295] [DEBUG]Using auto-detected bridge virtualgl
[ 506.597122] [INFO]Response: No - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 506.597316] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 506.597448] [DEBUG]Socket closed.
[ 506.597538] [ERROR]Aborting because fallback start is disabled.
[ 506.597654] [DEBUG]Killing all remaining processes.
Now, the nvidia is enabled.
# cat /proc/acpi/bbswitch
0000:01:00.0 ON
# modprobe nvidia
modprobe: FATAL: Module nvidia not found.
/etc/bumblebee/bumblebee.config
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
/etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:01:00:0"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
What is wrong? Thanks so much for help!

Just did a downgrade and it's working again, here are my versions.
linux 3.9.9-1
linux-headers 3.9.9-1
nvidia 319.32-2
nvidia-utils 319.32-1
bbswitch 0.7-4
If you have conflicts, I found it easiest to remove those (bbswitch, virtualbox in my case), downgrade linux and then install the appropriate bbs/vb packages

Index does not exist error while running the query

Hi Everone,
I am facing some problem when i try to tun the query in BEx. When i run the query, it is giving the error "Index does not exist". Please help me out.
With Regards
Pavan
Edited by: PavanRaj_S on Mar 3, 2010 4:50 AM

Hi,
If you facing index problem go to mange create the index and you want to know what are all the infocubes not maintained index go db02 you can find out.
Regards
sivaraju

Setup solution database - "2007 index does not exist"

Hi all,
after setting up the solution database following the Implementation Guide on a Solution Manager 7 SP 19 system, I created some test problem and solution articles and linked them.
When I try to do now a full compilation for the first time via SAF Diagnosis, Goto > Indexes, then the error message "2007 - index does not exist" comes up.
So, I checked the customizing and did the customizing again. I assigned the Knowledge Base SDB to a higher level than its sub knowleged bases SDB Problems, SDB Solutions like this:
SDB
- SDBATTACHEMENT
- SDBICS
- SDB PROBLEMS
- SDB SOLUTIONS
- SDB SOLUTIONS DOC
Anyway, the same error message
I checked some threads but it didn´t help so far.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID1583639050DB00866280264985025627End blog=/pub/wlg/7522
Did anyone solved this issue?
How can I activate the index?
Any hints/ ideas are highly appreciated.
jan

Hi guys, just to get the thread up.. quite important.
Is there anyone who can share some ideas?

TREX "Index does not exist" in TrexQueueServerAlert.trc

Hi Portal Gurus
We have installed EP 6 SP9 + KM/CM, then upgraded to SP16, and installed TREX 6.1 with Patch 27 all on AIX 5.3. I cannot get the indexing to work, I get green lights for the index monitor and the crawler monitor finds the index but no documents are indexed ie. all fields 0's. I have the following error in the TrexQueueServerAlert.trc file:
CLIENT_TRACE TRexApiAdmin.cpp(04615) : TNS: getServer failed for index 'adrienne_test', function: 'getAttributeList'
CLIENT_TRACE TRexApiAdmin.cpp(04695) : Index does not exist;index=adrienne_test : return code: 2007
I also get the following error in the TrexIndexServer.Alert:
TrexNet Channel.cpp(00222) : ERROR: reading from 3 <my.ip.num.here:30001> failed with rc=14 (connection broken)
TrexNet Channel.cpp(00222) : ERROR: reading from 3 <my.ip.num.here:30001> failed with rc=14 (connection broken)
TrexNet BufferedIO.cpp(00440) : ERROR: read from 3 <my.ip.num.here:30001> failed - resetting buffer
TrexNet BufferedIO.cpp(00440) : ERROR: read from 3 <my.ip.num.here:30001> failed - resetting buffer
TNSClient.cpp(00448) : sendRequest to myhostname:30001 failed with NetException. data=[setinactive](S)client_
id=myhostname:30013.145012...
TNSClient.cpp(00448) : sendRequest to myhostname:30001 failed with NetException. data=[setinactive](S)client_
id=myhostname:30003.116748...
I have seen other threads for the above error that involves assigning the CM System for the TaskQueueReader which I have done but this has not solved the problem.
Points rewarded for answer that solves this issue.
Thanks
Adrienne

Hi Adrienne,
One more suggestion..
Trying to deactivate the Index management service and activating it back.
Steps:
1. Go to System Admin - system Config - KM - Global Services
2.Activate the "advanced mode" from the top level menu
3. Find "Index Management Service" and go inside.
4. Edit the same and remove the tick mark from "Active" field.
5. To view the change,Restart the J2ee engine. Now you Index management service in "inactive".
6. Check the Index Management Service. ( if available, it shouldnt)
7. Now activate the index management service again by placing the "tick mark" in the "Active " field and restart the entire service (j2ee,db, trex)
8. Now go the "Index Managment" and delete old indexes and its references.
9. Try creating a new index with a new data source.
10. Now it should work.
Regards,
venkat.
[Pls say the SDN way of thanks by rewarding points for all helpful answers]

ORA-01418: specified index does not exist though the index exist !!

Hi all,
This problem occures only sometimes. I'm getting the list of indexes from the user_indexes table and later perform on them a rebuild operation by using the command :
Alter index index_name coalesce
This might cause on some indexes to the following error:
ORA-01418: specified index does not exist
I know these indexes exist and I didn't find any reson for this situation.
Does anyone have any idea about it ?
Thanks,
Lital

The index name can be created in sensitive case. Try to use double-quote.
Alter index "index_name" coalesce;That give something like this :
SCOTT@demo102> create index "Titi" on emp2(empno);
Index created.
SCOTT@demo102> alter index titi coalesce;
alter index titi coalesce
ERROR at line 1:
ORA-01418: specified index does not exist
SCOTT@demo102> alter index "Titi" coalesce;
Index altered.
SCOTT@demo102> Nicolas.
Add example
Message was edited by:
N. Gasparotto

ORA-22160 - element at index does not exist

A script that I am running to load data into a table using bulk
binding (using nested table variables and FORALL) produces an
error
"ORA-22160: element at index [77] does not exist".
Just prior to the forall...insert... I report the size of each
nested table variable using COUNT and get a number that is much
larger than 77. I run a query on the data to see if the data
got loaded despite the error message and it did get loaded. Is
this a bug in Oracle 8.1.6 or is something else going on?
sample code:
dbms_output.put_line(i_sec_cn.count);
dbms_output.put_line(i_twn_cn.count);
dbms_output.put_line(i_sec_no.count);
forall i in i_sec_cn.first..i_sec_cn.last
insert into sections (cn,township_cn,section_no)
values(i_sec_cn(i),i_twn_cn(i),i_sec_no(i));
output excerpt:
2687
2687
2687
ORA-22160: element at index [77] does not exist

A script that I am running to load data into a table using bulk
binding (using nested table variables and FORALL) produces an
error
"ORA-22160: element at index [77] does not exist".
Just prior to the forall...insert... I report the size of each
nested table variable using COUNT and get a number that is much
larger than 77. I run a query on the data to see if the data
got loaded despite the error message and it did get loaded. Is
this a bug in Oracle 8.1.6 or is something else going on?
sample code:
dbms_output.put_line(i_sec_cn.count);
dbms_output.put_line(i_twn_cn.count);
dbms_output.put_line(i_sec_no.count);
forall i in i_sec_cn.first..i_sec_cn.last
insert into sections (cn,township_cn,section_no)
values(i_sec_cn(i),i_twn_cn(i),i_sec_no(i));
output excerpt:
2687
2687
2687
ORA-22160: element at index [77] does not exist

Index does not exist in database system MaxDB

Hi!
Could some one tell me what can I do with this error message.
This message is in Prod, it doesn't happen in Qas and Test environment. The Database and sap was down and up again.
The Index was active in prod. again.
I really need help.
Thanks in advance

Dear Mr. Rodriguez,
You wrote that the problem occurred on the PROD system.
Are you SAP customer?
If you are SAP customer plese see the SAP notes::
928037 FAQ: MaxDB Indexes
940420 FAQ: Database structure check (VERIFY)
990602 FAQ: CCMS for MaxDB/SAP liveCache technology
896023 Incorrect CREATE INDEX statement in DFACT.SQL
767598 Available documentation
If you are SAP customer, please create the ticket on queue BC-DB-SDB for
your issue.
Please review the Rules of Engagement at
Welcome and Rules of Engagement
Please provide more information to get clear on your problem:
-> What is the database version?
 < dbmcli -d <SID> -u control,<control> show version >
-> What were the errors in the knldiag* files?
-> If you restarted the database ones, it will be helpful to
 review the knldiag.old file for additional information.
-> Please run Database structure check & review the results.
Thanks you and best regards, Natalia Khlopina

Bumblebee complains that nouveau does not exist (using nvidia)?

I'm trying to get bumblebee working with the nvidia driver. Nouveau is not installed and the driver is set to "nvidia" in /etc/bumblebee/bumblebee.conf. For some reason I'm getting the following error:
[ 1435.391816] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
Here is the full output of optirun -vv glxgears --info :
[ 506.838977] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 506.839573] [INFO]Configured driver: nvidia
[ 506.839939] [DEBUG]optirun version 3.2 starting...
[ 506.840004] [DEBUG]Active configuration:
[ 506.840025] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 506.840045] [DEBUG] X display: :8
[ 506.840064] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[ 506.840082] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 506.840101] [DEBUG] Accel/display bridge: auto
[ 506.840120] [DEBUG] VGL Compression: proxy
[ 506.840132] [DEBUG] VGLrun extra options:
[ 506.840143] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 506.840175] [DEBUG]Using auto-detected bridge primus
[ 507.012729] [INFO]Response: No - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 507.012746] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 507.012752] [DEBUG]Socket closed.
[ 507.012767] [ERROR]Aborting because fallback start is disabled.
[ 507.012773] [DEBUG]Killing all remaining processes.
/etc/bumblebee/bumblebee.conf looks like this:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
Any ideas?
Thanks,
H.

click

Load failure: TREX_EXT_GET_INDEX_INFO Index does not exist

Similar Messages

Maybe you are looking for