Load Search Interfaces in Endeca 3.0

Hi,
In version 2.4 we had this nice LoadIndexingConfiguration graph which sets some input attributes to searchable and create different search interfaces based on the input file.
In version 3.0 this graph is gone and now (as far as I see) the LoadConfiguration graph sets the attributes in the attributemetadata file as searchable and creates 1 search interface 'All' for all these attributes.
What is the best way to load some additional search interfaces in Endeca Server? I have tried to change 'All' to another name but it simply replaces the 'All' interface with the new one. I also tried to use the 2.4 LoadConfiguration graph but this doesn't work. It loads the search interfaces in Endeca Server but I don't see them in Studio.
Kind regards,
Marco

Marco,
Keep in mind that all your search interfaces reside in the recsearch_config document in the Dgraph. You can load this document via a Web Service Client in a graph (like the Load Search Interfaces component in the LoadConfiguration graph). You can, for example, write your own set of search interfaces with a text editor (like TextPad) and then load it via the Web Service Client. Similar to this in the Integrator User's Guide:
http://docs.oracle.com/cd/E39272_01/integrator.300/integrator_users/toc.htm#Configuring%20record%20search
Two things to keep in mind:
1. The recsearch_config document that you load completely overwrites the one that is currently in the Dgraph. That is, you can't incrementally add a new search interface. So if you have 2 search interfaces in the Dgraph and want to add a third, you have to load all 3 in the same recsearch_config doc.
2. In Studio, make sure you configure the new search interface, as documented here:
http://docs.oracle.com/cd/E39271_01/studio.300/studio_users/toc.htm#Managing%20the%20list%20of%20search%20configurations
Frank

Similar Messages

Our MAC Books have issues loading search engines like Google, when on the Corp. network, all other browsers work fine.

Our MAC users have trouble loading search engines on our Corp. network when going through our FWs. The browser works fine when they are on our guest network or out side the office.

system details are incorrect.... i am using FF4.0.1 as on the about firefox tab
Application Basics
Name
Firefox
Version
4.0.1
User Agent
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.0.13) Gecko/2009073022 Firefox/3.0.13 (.NET CLR 3.5.30729)
Profile Directory
Open Containing Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Microsoft .NET Framework Assistant
1.2.1
false
{20a82645-c095-46ed-80e3-08825760534b}
Java Console
6.0.20
true
{CAFEEFAC-0016-0000-0020-ABCDEFFEDCBA}
Java Quick Starter
1.0
true
[email protected]
BullGuard Safe Browsing Toolbar
1.0
true
antiphishing@bullguard
PC Sync 2 Synchronisation Extension
1.0.0.713
false
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.history_expire_days.mirror
180
browser.history_expire_days_min
5
browser.places.importBookmarksHTML
false
browser.places.importDefaults
false
browser.places.leftPaneFolderId
-1
browser.places.migratePostDataAnnotations
false
browser.places.smartBookmarksVersion
2
browser.places.updateRecentTagsUri
false

Customizing the Bridge Search Interface

I've created a custom MetaData Schema and custom FileInfo panel for my CS4 applications.
Now, I'd like to customize the bridge search interface. Currently, the search interface shows EXIF metadata types as searchable. I'd like to add my own, and remove the EXIF.
After reading the Adobe Bridge CS4 Javascript Guide, I believe that I can do what I want by creating a whole new script driven search window. It seems like it should be much easier than that to modify the Search interface directly.
Any suggestions?
Thanks.

My suggestion would be to post in the Bridge Scripting forum:
http://forums.adobe.com/community/bridge/bridge_scripting

PC Suite - Error 'Unable to load Progress Interfac...

I installed Nokia PC Suite (7.1.40.1) to a netbook running XP Home and tried to sync my N95 with the Outlook data and received an error message of 'Unable to load Progress Interface'. The phone connects OK but times out while the error message displays. Once the error message is closed down the sync attempt stops with no success.
I previously had no problems syncing with an earlier version of PC Suite on a different laptop. I removed and reinstalled Nokia PC Suite 3 times but the error persists.
Can anyone help please?

I had exactly the same problem with the PC Suite when it updated itself to the latest version (PC Suite 7.1.40.1). Nokia could not provide any assistance.
I tried the OVI Suite in place of the faulty PC Suite (having read some of the postings here). It was of no use as the OVI Suite does not load the Calander Function at all - which is one of the two functions I need to synch - contacts and calander.
So much for having a smart phone that you cannot synch!!!!

My adobe Photoshop opens, loads full interface, then exits without any error message etc.

My adobe Photoshop opens, loads full interface, then crashes without any error message etc.
Help?

If there is no error from the OS - then it did not crash, just exited.

6630 - Unable to load progress interface

Hi there,
I have just taken over a Nokia 6630 from a friend who has upgraded to a better/new Nokia mobile phone.
I downloaded Nokia PC Suite, version 6.83.14.1 and installed it without problem. Using a USB cable I have successfully synchronised between the Microsoft Outlook calendar and the mobile phone.
However it now will no longer work. It works fine on my PC at home. On the work PC I first connected using the USB cable and receive a successful connection. I then try and synchronise. At first the mobile phone says "connecting" followed by "initialising" followed by "sending calendar 23 of 244".
The PC then says "unable to load progress interface" and will go no further.
I have tried uninstalling and reinstalling Nokia PC Suite but no success.
I have trawled through previous postings but I cannot find anything to help me resolve this problem.
Can anyone offer any help or suggestions?

Hi,
You didn't write are you using Outlook or some other application. Is it same version than you have at home? One thing can be that network settings are different at work and at home. Have you tried to re-create sync settings on PC side?

New "Loading Database Data into Endeca Information Discovery Applications" product enablement video available on YouTube!

Hi All,
The Endeca Information Discovery Information Curriculum Development team just added a new video, "Loading Database Data into Endeca Information Discovery Applications", to the Video Feature Overviews section of the Oracle Endeca Information Discovery YouTube channel.
The URL for the video is https://www.youtube.com/watch?v=ix6bGULuY1I&list=PLQl6jp6EE5H2K4JDic6bIPA7yZgbi1KAQ .
Here’s a description of the video tutorial:
The goal of this video tutorial is to enable you to configure Studio to use data from a JDBC data source and to create your own application in Studio.
The target audience is Studio administrators who have to configure a JDBC data source in Studio’s Data Source Library. As a secondary audience, business users will learn how to load data from a JDBC data source and create a discovery application in Studio.
As always, if you have any ideas for additional videos, please let us know.
Thanks!

Hi All,
The Endeca Information Discovery Information Curriculum Development team just added a new video, "Loading Database Data into Endeca Information Discovery Applications", to the Video Feature Overviews section of the Oracle Endeca Information Discovery YouTube channel.
The URL for the video is https://www.youtube.com/watch?v=ix6bGULuY1I&list=PLQl6jp6EE5H2K4JDic6bIPA7yZgbi1KAQ .
Here’s a description of the video tutorial:
The goal of this video tutorial is to enable you to configure Studio to use data from a JDBC data source and to create your own application in Studio.
The target audience is Studio administrators who have to configure a JDBC data source in Studio’s Data Source Library. As a secondary audience, business users will learn how to load data from a JDBC data source and create a discovery application in Studio.
As always, if you have any ideas for additional videos, please let us know.
Thanks!

List of Search Interface.

Is there any ready made editor that would pull dynamic list of all my Search Interface?.

I have this issue. I have given my DCs and DHCP servers fixed IPv6 addresses, and every time I enable an IPv6 scope the all get a second IPv6 address from the scope, which is also published do DNS and then the next time I reboot a domain controller there
is complete confusion.
My objectives (which I am finding hard to achieve) are:
- fixed IP addresses for all systems (in IPv4 I use static IPs on servers and DHCP reservations on workstations)
- I control the gateways. If my official gateways are down I want no connectivity to the Internet, I don't want anything configuring itself.
CarolChi

Dynamic Class Loading with interface

Hello
I would appreciate any help on the following problem.
I need to load all classes in a particular directory and its subdirectories (top directory is known but not in the classpath) which implement a predefined interface. At the moment I am using a lot of reflection to accomplish this and believe it can be avoided somehow using the fact that I know these classes have to implement a predefined interface.
At the moment, I am searching through the directory and subdirectory, loading all names of classes into a vector using a custom URLClassloader, and then load all classes in the vector into modulecontainers to populate a defaultmutabletree which is displayed on the gui.
I'm sure that knowing the interface means there's a more straightforward way.
Thanks in advance.

Finally i've found out myself, i've read some postings in this forum and put them all together, so that my webstart-application finally works the way i want...
That was the topic:
Downloading a jar-file and starting a class from this jar-file within a webstart application (dynamic class loading).
I'll post my final solution for this problem, may be it would be useful in future for anyone else.
//grant all permissions on the clientside
Policy.setPolicy( new Policy() {
public PermissionCollection getPermissions(CodeSource codesource) {
Permissions perms = new Permissions();
perms.add(new AllPermission());
return(perms);
public void refresh(){
//get the current classloader
ClassLoader cl = MyLoadedClass.class.getClassLoader();
//create a new url-classloader while using the current classloader
URL[] urls = new URL[1];
File f = new File(new String(jarName));
urls[0] = f.toURL();
URLClassLoader ul = new URLClassLoader(urls, cl);
//load a class from jarfile
Class c = ul.loadClass(new String(className));
//get an object from loaded class
Object o = c.newInstance();
/* Are we using a class we specifically know about? */
if (o instanceof KnownInterface){
// Yep, lets call a method we know about. */
KnownInterface client = (KnownInterface) o;
client.doAnything();

Macbook Pro slow startup, extra slow to load dock/interface

I have a Macbook Pro core 2 duo era 2007, OS 10.6.8, with an interesting problem I've not encountered in reading other issues. Here's the system profile, to get that out of the way:
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          2 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBP31.0070.B07
SMC Version (system):          1.16f11
Serial Number (system):          W87*****AH
Hardware UUID:          00000000-0000-1000-8000-001******528
Sudden Motion Sensor:
State:          Enabled
Other than the faulty video card that seems standard for this run of the Pro, I have never had an issue. I have just replaced the battery from the original battery that came with the computer. It was useless to the extent of the word, but my budget did not allow me to purchase a new battery until recently. The battery info only stated "Replace Now" and the LED meter no longer functioned. The battery held no charge, and the computer only ran off of wall power. Up until a few days before I replaced the battery, this provided no trouble. However, it began one day to startup extremely slowly (5 minutes or more on the Apple logo startup screen, and then more time to load dock/top screen toolbar/etc. It also failed to recognize the external HD I frequently use with this computer. My theory was that it was simply underpowered on account of the failed battery, and the internal HD or the CPU was just not able to run properly. I finally put a new battery in hoping that it would fix the issue, but no avail. My startup time seems slightly less, but it seems as if the computer has not loaded interface protocols, as the computer is unresponsive to attempts to open the dock or a finder window, or even hover over battery or volume icons. After 5-10 minutes it finally kicks in and I can use my computer without problem, with the exception of the external HD, which will still not load.
I have run disk utility, verified my HD, no errors reported. I have the activity monitor up which shows a pretty minimal load on the CPU and disk usage. Nothing I can think of would explain the problem my computer has suddenly adopted. I love the **** out of this computer though, so any help is appreciated!

Stefan_Axel wrote:
120 GB, with 5.9 free. I've been running my laptop with about the same free:used ratio for a while without issue. I attempted a disk repair once earlier, but not using the install disc. I'll try that. The prompt reply is appreciated!
Well you're having issues now! Time to clean house! Where did my Disk Space go?
Slimming your hard drive
OmniDiskSweeper is a free utility that checks HD space.
FreeSpace cost $1 or is a free utility that checks HD space.
SpaceControl is a free utility that checks HD space.
Rule of thumb: You should never let your hard drive get to where you have only 10-15% of space left.

I have acp medicine cd. I copied it to hard disk. Now used start.htm to launch the webpage based application.table of contents is not loading, search not workin

acp medicine cd is version 2006. I have java 7 update 45.
Java Plug-in 10.45.2.18
Using JRE version 1.7.0_45-b18 Java HotSpot(TM) Client VM
User home directory = C:\Users\Admin.lt01
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
basic: Added progress listener: sun.plugin.util.ProgressMonitorAdapter@1786789
basic: Plugin2ClassLoader.addURL parent called for file:/E:/Apps/ACPCD/ACPCD/sam.jar
network: Cache entry not found [url: file:/E:/Apps/ACPCD/ACPCD/sam.jar, version: null]
basic: Added progress listener: sun.plugin.util.ProgressMonitorAdapter@177b4d3
network: Cache entry not found [url: file:/E:/Apps/ACPCD/ACPCD/sam.jar, version: null]
network: Cache entry not found [url: file:/E:/Apps/ACPCD/ACPCD/sam.jar, version: null]
basic: Plugin2ClassLoader.addURL parent called for file:/E:/Apps/ACPCD/ACPCD/sam_java/tree.jar
security: Accessing keys and certificate in Mozilla user profile: null
network: Created version ID: 1.7.0.45
network: Created version ID: 1.7.0.45
network: Cache entry not found [url: file:/E:/Apps/ACPCD/ACPCD/sam_java/tree.jar, version: null]
network: Cache entry not found [url: file:/E:/Apps/ACPCD/ACPCD/sam_java/tree.jar, version: null]
network: Cache entry not found [url: file:/E:/Apps/ACPCD/ACPCD/sam_java/tree.jar, version: null]
0
basic: Embedding dialogs not enabled in Configuration
security: SSV validation:
running: 1.7.0_45
requested: null
range: null
javaVersionParam: null
Rule Set version: null
network: Created version ID: 1.7.0.45
network: Created version ID: 1.7.0.45
security: continue with running version
network: Created version ID: 1.7.0.45
network: Created version ID: 1.7
network: Created version ID: 2.2.45
security: SSV validation:
running: 1.7.0_45
requested: null
range: null
javaVersionParam: null
Rule Set version: null
network: Created version ID: 1.7.0.45
network: Created version ID: 1.7.0.45
security: continue with running version
network: Created version ID: 1.7.0.45
network: Created version ID: 1.7
network: Created version ID: 2.2.45
basic: Applet loaded.
basic: Applet resized and added to parent container
basic: PERF: AppletExecutionRunnable - applet.init() BEGIN ; jvmLaunch dt 2891122 us, pluginInit dt 12593728 us, TotalTime: 15484850 us
basic: Applet loaded.
basic: Applet resized and added to parent container
basic: PERF: AppletExecutionRunnable - applet.init() BEGIN ; jvmLaunch dt 2891122 us, pluginInit dt 12910284 us, TotalTime: 15801406 us
basic: Applet initialized
basic: Starting applet
basic: completed perf rollup
basic: Applet made visible
basic: Applet started
basic: Told clients applet is started
java.net.MalformedURLException: no protocol: data.gz
JObjects QuestAgent
Copyright (c) 1997-2002, JObjects International. All rights reserved.
http://www.jobjects.com
java.io.IOException: Failed to open file for read: sam.prm
at com.jobjects.quest.e.c.a(c.java:55)
at com.jobjects.quest.e.c.a(c.java:63)
at com.jobjects.quest.e.c.a(c.java:31)
at com.jobjects.quest.agent.GenericSearchApplet.init(GenericSearchApplet.java:51)
at com.jobjects.quest.agent.LiveConnectApplet.init(LiveConnectApplet.java:166)
at com.sun.deploy.uitoolkit.impl.awt.AWTAppletAdapter.init(Unknown Source)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
[ERROR] Can't load applet parameters from sam.prm <java.io.IOException: Failed to open file for read: sam.prm>
[DEBUG] Detected browser: sun.plugin
[DEBUG] Creating search panel.
[DEBUG] Search panel created.
[DEBUG] Search applet initialized.
basic: Applet initialized
basic: Starting applet
basic: completed perf rollup
basic: Applet made visible
basic: Applet started
basic: Told clients applet is started

Did it work when you started it directly from the CD?
Does it work if you open start.htm in Internet Explorer?
I don't have much experience with Java issues, but one thing to try would be to clear Java's cache, which is separate from your browser caches. This article has the steps: [http://www.java.com/en/download/help/plugin_cache.xml How do I clear the Java cache?]

Problems loading search engines

I can't access the google.com homepage or www.bing.com. When I enter the address firefox constantly tries to load the site and never does, happens with others broswers as well.

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*http://kb.mozillazine.org/Error_loading_websites
*https://support.mozilla.org/kb/web-pages-dont-load

Is it possible to save/export and load search queries?

Currently, when I open the Find/Replace window (Apple+F), I see a long list over every query I have saved in the dropdown menu. This is not ideal for me because of the 100 queries, I might only use 1–10 for Project A, 11–20 for Project B, and so on. Is it possible to export and save a group of search queries in one file, a second group in a second file, and so on? I would like to be able to load only the search queries that are relevant to a specific project and have in mind something akin to the "save" and "load" options in the swatches panel and styles panels.
I hope my question is clear, but please let me know if you would like additional information.

Your saved queries are stored as individual xml files in the Find-Change Queries folder in the prefs written in your user profile/library. Queries in subfolders don't seem to show up in the dialog list. It seems reasonable that you might be able to save sets in subfolders, then copy them into the main folder when you want them, but doing it manually would be a major pain. If multi-find/change doesn't do it for you already, it might be worth asking in the scripting forum if anyone could help with a script that would.

How to see rows errors not loaded by interface

Hello, I have a simple interface, I am loading data within same oracle database from one schema to another schema.
But I see 3 rows less.
Can some body please advice how to see rows that are not loaded,what was reason etc.
Thanks

Hi,
You can also see it within ODI by opening the Model --> right-clicking your target datastore -->Check --> Errors...
It shows you the table E$_ table for this specific datastore. For each rejected row, you will see the whole set of columns plus the reason of the rejection.
Hope it helps,
Jerome Fr

Search Configuration For Endeca Workbench-3.1.0

Hi,
Please let me know how to configure Stemming and Stopwords for search in Endeca Workbench version 3.1.0 [Experience Manager] .
Thanks in Advance!!
Mallikarjun

Hi,
from the Advanced Dev Guide (you should find that documentation on Oracle Doc website) :
- Enabling stemming
Stemming is enabled in Developer Studio.
To enable stemming for one or more languages in your project:
1. Open the project in Developer Studio.
2. In the Project Explorer, expand Search Configuration.
3. Double-click Stemming to display the Stemming editor.
4. Check one or more of the language check boxes on the list.
5. Click OK.
To disable stemming, use the above procedure, but uncheck the languages for which you do not want
stemming.
- Stopwords are defined using ex-Workbench new Experience Manager (when you logg into you application you have a feature dedicated for that)
hope that helps
regards
Saleh

Load Search Interfaces in Endeca 3.0

Similar Messages

Maybe you are looking for