Load single Requests form a Infocube in antoher infocube

Hi all,
is there a possibility to load a selection of Request IDs from a infocube in another infocube?
Situation:
Cube X1 has requests 4711, 4712, 4713
Now i want to load request 4713 into infocube x2. How can i do this??
Thank you very much for your help, best regards
Frank

Go through this link
Restructuring InfoCubes :
http://help.sap.com/saphelp_bw31/helpdata/en/f2/99223803926e39e10000009b38f8cf/content.htm
Regards

Similar Messages

How to set quality status of a request in an infocube by a function module

Hi folks,
in the maintenance of an infocube you have the possibility to go to a dialog called "maintenance of the automatism". That dialog allows you to set a flag therewith the quality status of a processed request is set automatically to green.
Does anybody know how to do that with a function modul or which tables have to be updated in order to do that by a litte ABAP?
Thanks+Cheers, Thomas

Hi Bhanu,
thanks for that one, pretty helpful.
Think of the following scenario:
1. untick the automatic setting of the quality status
2. load 4 requests into the infocube
3. once last request has been loaded tick the automatic setting of quality status
would that mean that once the status flag is ticked all 4 requests become available for reporting?
Cheers, Thomas

How to delete a single request from DSO in BI 7.0

Dear Experts,
Could you please tell me how to delete a single request from DSO?
I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
Please suggest me this issue.
Regards,
Prathap

IN DSO--its a very basic thing....
ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
So ,each new request has a realationsip with the older request.
So in the cases:
1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
e.g older request entries:
a x 1
new request
a x 2
change log
a x 1
a x -1
a x 2
so its quite obvious you can't have a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
thats request reverst posting
IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
regards,
rk

Error While Loading data from ODS to Infocube

I am trying to load data from ODS to Infocube thru Update ODS data into data target. My requirement was to take a small subset of fields from ODS and design IC and load the data.
My load fails at Extraction process as I get 0 records from total number of records sent in each package. Please let me know if you need more information.
Please advise.
Thanks,
RR

In Details tab of monitor, in extraction step,
Extraction(messages): Errors occured
Green Light for Data Request Received
Green Light for Data Selection Scheduled
Yellow for 25000 Records sent(0 records received)
Yellow for 25000 Records sent(0 records received)
Yellow for 15000 Records sent(0 records received)
Green Light for Data Selection Ended
Please let me know, If you need more information.
Thanks,
R R

Delete requests in a infocube with infopackage

Hi BW Gurus.
I have to delete a request in a infocube during the loading and I would like to use the option "deleting request from infocube after update" inside the infopackage.
The option "Selections are ...same or more comprehensive" is not what I need because I would like to delete only when the selections in the infopackege are equal and not when they are more comprehensive.
For example, if I load from month 01 to month 03, I want to delete only the prevous request with the same selection and not the request that have from month =01 to month=02 selection.
The infopackage selections are read from a custom table.
Thanks for any help.
S.

Hi. Thank for the reply.
I can't use this option.
Look at the example:
I have a request with "from month 01 to month 02" selection and I would like to load a request with "from month 01 to month 03" selection.
The option "'deleting requests with same or more comprehensive" deletes the request because month 01 to month 03 is more comprehensive than from 01 to 02 month.
The option 'deleting requests with overlapping selections' deletes the request because because month 01 to month 03 overlapp from 01 to 02 month selection.
It could be good to have a "delentig request with same selection" option and not with "more comprehensive" in the same option.
S.

How to fill a new single field in a Infocube with historical data

Hello Everybody,
We have an SD infocube with historical data since 1997.
Some of the infoobjects (fields) of the infocube were empty during all this time.
Now we require to fill a single field of the infocube with historical data from R/3.
We were thinking that an option could be to upload data from the PSA in order to fill only the required field (infoobject).
Is it possible? is there any problem doing an upload from the PSA requests directly to the infocube.
Some people of our team are thinking that the data may be duplicated... are they right?
Which other solutions can we adopt to solve this issue?
We will appreciate all your valuable help.
Thanks in advance.
Regards.
Julio Cordero.

Remodeling in BI 7:
/people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
http://www.bridgeport.edu/sed/projects/cs597/Fall_2003/vijaykse/step_by_step.htm
Hope it helps..

Load balancing Oracle Forms in Application Server

Hi,
We're currently planning moving from client-server forms to webforms running on Oracle Application Server (10.1.2.0.2). To meet our high availability requirements, we plan to run our forms app servers active-active. We're coming a little unstuck determining the best method of load balancing requests between these however.
Currently the main sticking point is determining whether to go for software or hardware load balancers. One of the main things we're unsure of is how much traffic we can expect to flow through the network. In our client-server environment we typically have 900-1000 active connections during peak load and ~350 forms coming in at just over 300Mb in total.
If you have any experience load balancing between Oracle Forms on Application Server, we'd appreciate it if you could share details of you setup and how it's performing; particularly:
* Whether you have software/hardware load balancing
* The number of connections this supports
* Details of the volume of network traffic you have
Thanks,
Chris

We have implemented both hardware load-balancers and Webcache as load-balancer. Depending on the situation either may be the best solution. In general we recommend to use hardware load-balancers for production systems that require high availability. However, Webcache is very reliable as well and a Webcache instance can be recovered very quickly in case of a failure (use the cloning facility to create a copy of the instance on new hardware within minutes).
When using https for your applications we do not recommend to use WebCache as there are several issues to cope with then, one is performance (https acceleration facilities are often part of hardware load-balancers).

SAP Best practice for Material request form

Hai Sap gurus,
Do we have any sap best practice for material request form? If so please help me to find this best practice provided by the SAP. I searched through sap help but i was unable to find one.
Same way i also need to find the sap best practice for Change request form too...
Thanking you all in advance.

Hi,
Check these links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2b50ac90-0201-0010-d597-8d833833f9e0
and using the service market place link to down load the best practices
http://www.sap.com/services/bysubject/servsuptech/index.epx

How to query on a single row form using only one page

Hi APEX experts, I am just a beginner in apex and I face several problems on development. Despite that the forum helps me a lot and your answers to other people are valuable , I have stacked into something. Could you please someone tell me : if there is a way to define a single row form page based on table in which I could query and update without using a tabular page (to call the single row form). I want only to use only one page. Does APEX has this functionality? Thank you very much?

I haven't tried it, but I am going to guess that yes it's possible (or if I were going to do this, this is what I'd try and I suspect it will work).
If you take a moment and step back and look at what the wizard does when building a "form on a table with report", all it does is build two pages with page 1 (report overview with drill-down Edit button or link usually) calling page 2 (form) and setting the PK field on the page 2 form with an automated row fetch process and built-in DML processes. It's not that hard.
Page 2 really doesn't care what the calling page was in order to query a single row; it just cares that ANY caller sets the primary key value for the ARF process to fetch a row. So I would just make page 2 call itself. This is what I'd do (and you might have to fine-tune little things that I might not have forseen but I think this will work).
For the sake of example, let's say our table is PARTS and in it is a PART_ID, PART_NUMBER, PART_DESCRIPTION, PART_COST, etc. Assume PART_ID is the primary key and sequentially assigned by the DB in a trigger and is functionally meaningless to the user and is for PK purposes only. Let's assume PART_NUMBER is a unique key (although not the PK) by which the user will "know" a unique row (since the PK of PART_ID is more internal and not meaningful to the user). Assume PART_DESCRIPTION, PART_COST, etc. are just attributes.
1. Use the wizard and build a "form on a table with report". This is just to get the handy dandy ARF process and DML processes, validations, etc. all generated for you. Let's assume the report page is Page 1 and the form is Page 2.
2. When done, delete the report page entirely (so delete page 1).
3. Edit the form page (page 2) and change any branch references from the nonexistent page 1 to now be page 2.
Now here's the part where something has to set the internal P2_PART_ID field when page 2 is run. So why not set it from itself from something the user will uniquely enter?
4. Create a P2_PART_NUMBER_FETCH item (text item is fine or if you want a LOV or whatever that's good too....whatever works. For clarity, you might even want to create a separate "search" or "query" region separate and above your existing form region to set this field apart visually so users know it's a search field. Source for this field should be "only when current value in session state is null".
5. Created some sort of "GO" button to go along with the P2_PART_NUMBER_FETCH field.
6. Make sure none of your existing post-submit processes fire when GO is pressed (edit all of the computations and validations and processes and ensure that they have conditions such that they do not fire when the submit value is "GO", so like a PL/SQL expression and set to v('REQUEST')<> 'GO').
7. Add a new validation to your page that only fires when GO is pressed. Have it validate only when GO is pressed. Have it validate that P2_PART_NUMBER_FETCH is not null.
8. Add a new PL/SQL process to your post-submit processing that only fires when GO is pressed. Have it look up to the database based on P2_PART_NUMBER_FETCH and get the PART_ID that corresponds to the part number the user entered and set the part number, something like this (even better for style and reusability if you embed this in a DB package function and call it):
SELECT part_id
INTO :P2_PART_ID
FROM PARTS
WHERE PART_NUMBER = :P2_PART_NUMBER_FETCH;
9. Not sure if the branches that were generated will suffice for this (might need to add a new one...review what you have and see) but the bottom line is that the page should branch to itself (page 2) and not clear the cache.
10. When the page repaints, since :P2_PART_ID is now populated in session state (again, page 2 should not care how it got populated...only should care that it did get populated by anything (including itself)), the automated row fetch (ARF) should fire and query up the row from the database for editing.

Load: class oracle.forms.engine.Main not found Stuck at loading Java Applet

Hi there
I have recently installed App Server 10.1.2.0 on a new machine.
Copied all my forms to an appropriate directory. Set up formsweb.cfg to allow them to run and have attempted to run them.
Unfortunately I get stuck at the Loading Java Applet screen, and in the status bar at the bottom it says :
load: class oracle.forms.engine.Main not found
I have taken a look at the Java Console, and the 2 things that jump out at me are that it appears to be looking for a forms90 directory, which seems odd since I am using App Server 10.1.2.0.2 and Forms Builder 10.1.2.0.2 meaning it should be looking in a forms directory not forms90 directory shouldnt it ?
And also, it mentions class with no proxy, so on looking around the forums it has been suggested that put the proxy details into jinitiator, which I have done, but this has made no difference either.
Can anyone suggest anything else please ?
Java Console log follows.
Thanks a lot
Scott
Oracle JInitiator: Version 1.3.1.9
Using JRE version 1.3.1.9 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\hilliers
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Unregistered modality listener
Removed trace listener: sun.plugin.ocx.ActiveXAppletViewer[oracle.forms.engine.Main,0,0,914x613,layout=java.awt.BorderLayout]
Sending events to applet. STOP
Sending events to applet. DESTROY
Sending events to applet. DISPOSE
Sending events to applet. QUIT
Finding information...
Releasing classloader: sun.plugin.ClassLoaderInfo@d9850, refcount=0
Caching classloader: sun.plugin.ClassLoaderInfo@d9850
Current classloader cache size: 1
Done...
Registered modality listener
Referencing classloader: sun.plugin.ClassLoaderInfo@d9850, refcount=1
Added trace listener: sun.plugin.ocx.ActiveXAppletViewer[oracle.forms.engine.Main,0,0,914x613,invalid,layout=java.awt.BorderLayout]
Sending events to applet. LOAD
Sending events to applet. INIT
Sending events to applet. START
Determine if the applet requests to install any HTML page
HTML Installation finished.
Opening http://appserver008/forms90/java/oracle/forms/engine/Main.class
Connecting http://appserver008/forms90/java/oracle/forms/engine/Main.class with no proxy
Opening http://appserver008/forms90/java/oracle/forms/engine/Main.class
Connecting http://appserver008/forms90/java/oracle/forms/engine/Main.class with no proxy
load: class oracle.forms.engine.Main not found.
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

You're a star, thanks.
In my haste I had cut too much out of my old formsweb.cfg file and not realised I'd done it.
Thanks Francois.

Request status in infocube is always in yellow status..

Hi Friends,
We are loading the data from 3 ODS to one infocube but all the requests from ODS to infocube is always haivng yellow status ( even though load is completed without any errors). We are manually changing the status to Green.
Any suggestions regarding this problem...
Thanks in advance

Symptom
All requests in InfoCubes have the QM status 'yellow traffic light'.
Solution
In the InfoCube administration in the menu
'Environment -> Request handling...'
activate the flag 'Set quality automatically' on the popup 'Maintenance of the automatisms'.
This flag was of no importance before BW Release 2.0.
This flag is interpreted actively as of BW Release 2.0. For InfoCubes where this flag is deactivated, every request must be set manually to green (available for reporting) or red (incorrect) by a QM action.
As a result, the individual request can have a different status independent from its monitor load status in different InfoCubes.
After upgrading from BW1.2B to BW2.0, the flag is interpreted, but is not set for any of the old InfoCubes.
Therefore data, including old data, is not automatically visible in reporting, if it is not rolled up or compressed.
In order to accomplish this, you can either activate the flag 'Set quality automatically' or set every request manually to green (administering the InfoCube on the 'Requests' tab in column 'QM status of the request after update').
This is a button column that only affects the status of this request in this InfoCube!
By setting the QM status in the monitor for the load log of this request you can set all QM statuses of this request in all updated InfoCubes simultaneously.
If you change this flag, you choose button 'Refresh' in the tabstrip 'Requests' so that the flag will interpreted and the requests are set to 'Green' in the InfoCube and thus displayed in Reporting.

XSQL Equivalent of ASP Request.Form variable

In ASP, I can get form values from an HTML page using Request.Form. How do I do this in XSQL?
My intent is to read in the username and password from the login page, and then do authentication to see if they have the credentials to log in.
If you can please email me any help at [email protected] that'd be great. Thanks!
Malik Graves-Pryor

I set the page up exactly as you showed Steven, but I get this error instead:
<?xml version="1.0" ?>
- 
- <database>
- <xsql-error action="xsql:query">
<statement>SELECT DISTINCT FIRSTNAME AS "FIRST-NAME", LASTNAME AS "LAST-NAME", EMAIL AS "EMAIL", USERNAME AS "USERNAME", ACCESSLEVEL AS "ACCESSLEVEL", USER_ID, PASSWORD FROM LKUP_USER WHERE USERNAME = ? AND PASSWORD = ? ORDER BY USER_ID</statement>
<message>ORA-01008: not all variables bound</message>
</xsql-error>
</database>I used the bind-params attribute in the manner that you described, and then loaded the XSQL page after submitting the username and password from my index.xhtml page via the action attribute on the form. Did I do something incorrectly?
Also, how does the SQL statement know which parameter to use for each '?'
i.e., I bound username and password in bind-params:
bind-params="username password"
how then does it know to use the correct value when I do this?
WHERE USERNAME = ? AND PASSWORD = ?
One more thing. I'm reading up on bind-params online and right now the only examples that are being shown are when the values are being passed through to the page via the URL, like so: http://www.oracle.com/xsql.xsql?username=Steve&password=Muench
For obvious reasons, I don't want to include the password string in the URL. If I set this up correctly, the bind-params attribute should allow me to just post the information from my index page's form correct?
Thanks again. This is invaluable.
Malik Graves-Pryor

Where is the continue support request form situate...

Hi there i have just paid 5.74 for a premium account shows that it has been debited and said that i had premium account, it wont let me make a group video call and i cant find the contact support request form anywhere PLEASE can anyone help me.....thankyou in advance

Whilst trying to buy a premium subscription package from Skype, I erroneously ticked the US + Canada box, when I wanted unlimited Europe....result....after two days of faffing about, Ive had to pay for an additional 'unlimited Europe' package...without being able to transfer the credit from the wrongly bought US + Canada package!!!
Why does Skype make their site so user 'unfriendly?!'
I've had to scroll laboriously through many pages to try and get a refund for the first premium package...skype will take your money quickly enough...why cant they just have a 'request cancellation/refund button on the accounts page? it doesn't make any sense....and it causes loads of hassle....if anyone out there has an easy/any way to get my money back...please get in touch

Deleted Red Request Reappears in Infocube

Hi all,
We are facing one peculiar problem in which, When we delete one Erroneous request from Infocube, It gets deleted. But, again going to manage and if we check, this request reappears. We deleted all the data from Infocube. We checked Job log which shows that, Request is deleted. Still that request appear in Infocube. Please help us to solve the problem
Thanks and Regards,
Harpal

Hi,
Through SM37 select the job and stop it...it won't stop if it running from long time...for long running job go to SM50 see the process running from your ID....there could be more then one process running ...one is for your session in the system and you cannot kill that....check for the other one and go inside the log to see if it is the right one ...which you want to cancel....just select the process and in the top left you have the option to cancel without core....
In BW, u could do that by forcing the STATUS to RED Signal.
You have to stop the load in the source system if u r loading from R/3 System, for that use transaction SM50 or SM51 to kill the process.
Hope this helps
Cheers
Raj

Standard warning messages in Vendor Request Form

Hi All,
Please let us know, how are the standard warning messages in Vendor Request Form while creation/search are displayed.
For example, I am getting an soft warning message text, at vendor creation which says "Some of the records were not found; for more information, check the log".
Here we don't have any log traces to be checked for, and we have verified the back end record resultset count which is same, irrelevant of the warning message being shown.
These messages are displayed only at two places:
1) The search navigation page, where all the searched record results are displayed and we continue further for creation of vendor workflow.
2) When the workflow of vendor creation is completed, along with the "Workflow has been completed" success message, this warning message is also shown.
I want to know, from where these messages are being populated and how to suppress these messages.
Kindly suggest.
Thanks in advance!
Message was edited by: Oxana Noa Zubarev

Hi All,
Attaching the screen shot for refernce:
After we click on "continue with create/edit" button, after few details have been entered, the work flow completes.
There are we are getting these error message as highlighted above.
Let me know if any info from my end would help in getting the root cause.
Thanks in advance.

Load single Requests form a Infocube in antoher infocube

Similar Messages

Maybe you are looking for