Loading data from Info cube to PA

Hi All,
I am trying to load the CVC from Infocube to Planning Area in Development environment.
I am getting error message for mismatch of periodicity of infocube and Planning Area.
how to resolve this. Where do we define the periodicty of infocube ? I don't think so ?
Please help me
Thanks a lot
Prabhat Sahay

Prabhat,
I understand that you already have the data in the infocube and want to load it into the planning area.
However it is important to ensure that the data in the cube and the planning area have the same periodicity failing which we will run into such issues.
So pls go back to the step of defining the infocube.
In RSA1 if you double click on the infocube name which you are using as source, you can see the details in the right. In that, look for the dimensions section, under that look for the time section. If that contains a calweek or a calmonth and you are using a fiscal variant, this issue occurs.
You have to drop your infocube data, redefine the cube to use FISCAL PERIOD and FISCAL VARNT instead of calweek or calmonth and then load the data back again. You need to ensure you populate the fields FISCAL PERIOD and FISCAL VARNT. You might want to do that with routines in your update rules or your infosource communication structure. REmember to activate the entire structure from cube to data source.
Once you load the data into the cube with the new setting, and then try to copy the data into planning area, it will be successful.
To answer your other question. Yes Time Characteristics is necessary for loading data between cube and planning area.
Hope this helps.
Thanks
Mani Suresh

Similar Messages

  • To load data from a cube in SCM(APO) system to a cube in BI system.

    Experts,
         Please let me know whether it is possible to load data from a cube in SCM(APO) system to a cube in BI system.If so explain the steps to perform.
    Thanks,
    Meera

    Hi,
    Think in this way,
    To load the data fro any source we need datasource Ok. You can genare Export data source for Cube in APO,  then use that datasource for BW extraction, try like this. I think it will work, in my case I'm directly loading data from APO to BW using the DataSource sthat are genaraed on Planning Area.
    Why you need to take data from APO cube?. Is there any condition for that?. If it is not mandatory, you can use the dame datasource and load the data to BW, if they have any conditions while loading the data from APO to APO cube, they you try check wherther it is possible in BW or not. If possible then you use DataSource and do the same calculation in BW directly.
    Thanks
    Reddy

  • Automatically trigger the event to load data from Planning cube to Standard Cube

    Hello,
    We have a below set up in our system..
    1. A Planning BEx query using which user makes certain entries and writes back data to the planning cube.
    2. An actual reporting cube which gets data from the planning cube above.
    Now, what we want to do is to automate the data load from Planning cube to Reporting cube.
    This involves 2 things..
    1. Change the setting " Change real time load behaviour " of the planing cube to Planning.
    2. Trigger the DTP which loads data from Planning cube to reporting cube.
    We want to automate the above two steps...
    I have tried few things to achieve the same..
    1. Created an event in SM64,
    2. In the Planning cube "Manage" Screen,  clicked on "Subsequent Processing" and provided the event details. ( Not sure if its the correct place to provide the event detail ).
    3. Wrote a ABAP program which changes the setting of the planning cube (  " Change real time load behaviour " to Loading )
    4. Created a process chain, where we have used the event as a start variant, used the ABAP program as a next step, DTP run as the last step..
    This i hoped, would trigger the event as soon as a new request comes and sits in planning cube, which in turn would trigger the process chain which would load the data from Planning cube to reporting cube..
    This is not working. I dont think the event is triggering, and even if does i am not sure whether it will start the process chain automatically. Any ideas please ?

    hi,
    try to do the transformation directly in the input cube by using CR of type exit, more details :
    http://help.sap.com/saphelp_nw70ehp2/helpdata/en/43/1c3d0f31b70701e10000000a422035/content.htm
    hope it helps.

  • How to extract data from info cube into an internal table using ABAP code

    HI
    Can Anyone plz suggest me
    How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
    Thankx in advance
    regds
    AJAY

    HI Dinesh,
    Thankq for ur reply
    but i ahve already tried to use the function module.
    When I try to Use the function module RSDRI_INFOPOV_READ
    I get an information message "ERROR GENERATION TEST FRAME".
    can U plz tell me what could be the problem
    Bye
    AJAY

  • How to load data from info object to ODS

    Hello BW Gurus,
    Is their any way to load data from info object to ODS and I am unable to fine the Info source for that particulate info object master data.
    For ex: we have 0PROFITCENTER as info object which is getting loaded everyday. We want same data in ODS too but I don't find any info source related to this info object to create update ruled.
    Please advise me how to proceed with this,
    Thanks,
    Swathi.

    hi Swathi,
    as mentioned, if you just need the master data text or attribute update, then it's sufficient to load 0PROFITCENTER master data. (don't forget to 'apply hierarchy/attribute change' - rsa1->tools)
    if you are going to update attribute in ods with attribute from 0PROFITCENTER, you can choose look up master data attribute method in update rules.
    if the requirement is really need 0PROFITCENTER to assign to update rules, then first you have to 'generate export datasource' for infoobject 0PROFITCENTER, right click the infoobject and 'generate export datasource', then do 'replicate datasource' from bw myself, after that it will available. to display it you may go to rsa1->infosource, and menu settings->display generated objects.
    hope this helps.

  • Dump while loading data from 1 cube to other cube

    Hi,
    We created a direct mapping between 2 cubes ( no start/end routines, formula exist in the mapping). Strange part is while I am loading data from one cube to other cube all data packages executing successfully only last data package giving dump with ITAB_DUPLICATE_KEY. This is in our QA system. But it is working/loading correctly in DEV.
    Please help. Thanks in advance for your support.
    Regards,
    Sai

    Hi Sai,
    Please refer to below blog for ITAB Duplicate Key error.
    ITAB_DUPLICATE_KEY Dump error during Master Data loading
    This can occur when a BW client has many different source systems, unused objects still remains, creating a duplicate entry in RSISOSMAP table.
    Regards
    Shabnam

  • Loading Data from one Cube into another Cube

    Hi Guys,
    I am trying to load data from one cube A to another cube B. Cube A has data around 200,000 records. I generate export datasource on Cube A. Replicated the datasource and created InfoSource and activated it.
    I created update rules for Cube B selecting Source as Cube A. I do have a start routine to duplicate records in Cube A. Now when I schedule load,
    It stops at Processing Datapacket and says no data. Is there something wrong with the update routine or is there any other way to load form cube to cube in a simpler way?
    Thanks in advance

    This is the start routine to duplicate records in two currencies.
    DATA: datew   TYPE /bi0/oidateto,
          datew2  TYPE rsgeneral-chavl,
          fweek   TYPE rsgeneral-chavl,
          prodhier TYPE /bi0/oiprod_hier,
          market  TYPE /bic/oima_seg,
          segment TYPE /bic/oizsegment.
    DATA: BEGIN OF S_DATA_PACK OCCURS 0.
            INCLUDE STRUCTURE /BIC/CS8ZSDREV.
    DATA: END OF S_DATA_PACK.
    S_DATA_PACK[] = DATA_PACKAGE[].
      REFRESH DATA_PACKAGE.
      LOOP AT S_DATA_PACK.
        move-corresponding s_data_pack to DATA_PACKAGE.
        if DATA_PACKAGE-loc_currcy = 'EUR'.
          DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
          DATA_PACKAGE-CURRENCY = 'USD'.
          APPEND DATA_PACKAGE.
          DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
          DATA_PACKAGE-CURRENCY = 'EUR'.
          APPEND DATA_PACKAGE.
        else.
          DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
          DATA_PACKAGE-CURRENCY = 'USD'.
          APPEND DATA_PACKAGE.
        endif.
      ENDLOOP.
    This is to load Quantity field
    RESULT = COMM_STRUCTURE-BILL_QTY.
    This is to load Value field
    RESULT = COMM_STRUCTURE-NETVAL_INV.
    UNIT = COMM_STRUCTURE-currency.

  • Steps involved in Selective Deletion of Data from Info Cube

    Please search...this is much discussed in different threads out here
    Hi Experts
    I shall be greatful if you can updated me with the detail steps involved in Selective Data Deletion from a Info Cube....as i need to delete data selectively from a Infocube in LIVE system...so there is no second chance for me..
    Please update in detail
    Thanks in advance
    Edited by: Moderator

    Not sure how you were searching, but did you come across any of these...
    https://forums.sdn.sap.com/search.jspa?threadID=&q=selective+deletion&objID=f131&dateRange=all&numResults=15

  • Less number of Records while loading data from one cube to another

    Hi,
    We are in the process of doing major changes in the existing InfoCube.
    Before making any changes, we had planned to make a copy of the cube with data.
    For this we did the following steps :
    1. Created the new cube from the original cube.
    2. Generated Datasource on the Orignal cube.
    3. Made a update rule on the new cube by selecting the Orinal cube.
    4. Made a InfoPack on Infosouce which got created with 8<original cube>.
    5. Uploaded the data into the new cube.
    We have uploaded the data successfully from the original cube to the new cube.
    However, New cube shows less number of records as compared to the original cube.
    But the query is showing the same figures from both the cubes.
    Can anyone please advise what could be the reason for this less number of records and how the figures are showing same when we run the query from both the cubes.
    Please help.
    Thanks
    Ramesh Ganji

    Hi Ramesh,
    this is possible coz when u have loaded yr original cube, it may be loaded on daily/weekly basis. so in the cube there are many requests. Also if in the same request, if there are two records with same dimension keys ther are automatically added aggregating them.
    if req 1 has following records
    cust mat amt
    1      1     100
    1      1       50
    it will add
    1      1     150
    and if the records are seperated by different req, then both will b added individually.
    therefore when u r loading yr new cube from original cube, all records that has same dimension key gets aggregated coz they are loaded into single request. so it showing less no of records as added.
    hope this helps.
    Regards,
    Purvang
    Assigning Point is to say Thanks in SDN *

  • Loading data from Base cube to copy cube

    Hi,
    I have created copy cube Name "Y" from Base cube "X".
    I want to load whole data from "X" to "Y" cube .Cube "X" having 7 million records.
    have created Trnasformation and DTP. When i schedule a load using DTP(Full update) from Cube "X" to Cube "Y".
    When i check the load in RSMO where it is showing as Unknown /None  load name is showing under a current running loads(active).
    After some time later it stat loading the data and some point at 500000 record at data packet some 10 it got stuck.
    Please advise me why the load name is showing as Unknown /None

    Hi......
    In the first tab ie Extraction Tab Page in the right side there is a icon ie Filter option......
    Check this link :
    http://help.sap.com/saphelp_nw04s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
    Regards,
    Debjani.....
    Edited by: Debjani  Mukherjee on Sep 11, 2008 10:18 PM

  • Regarding Load data from one cube to other cube in BW 3.X

    Hello Experts,
    Here is my scenario. I have one cube say c1  from which i need to transfer data into the cube say c2 which has material code <> blank and sales quantity is 0  . We  are using BW 3.x.
    Now how do i do that.
    Kindly Help Urgently.

    you have to write the below code in the start routine of your update rule.
    DELETE DATA_PACKAGE WHERE MATERIAL IS INITIAL AND SALES_QUANTITY NE 0.
    This code will delete the records where material is blank and sales quantity not equal to zero.
    So at the end of the start routine, you will get only those records with material not blank and sales quanity equal to 0.
    --- Thanks...

  • Loading data from one cube to another cube.

    Hi,
    Trying to copy the data from cube A to cube B...however after creating export data source(8A) on cube A, unable to find the infosource 8A.
    Do someone have any idea..... or I'm missing some steps?
    Help is highly appreciable.
    Regards,
    Jim

    Hi Amit,
    goto transaction sbiw in your BW system. Open 'Business Content DataSources' and select 'activate application component hierarchy'. After that you can additionally choose 'activate business content datasources'. Then goto rsa1->source systems. Right click on your source system (BW itself) and replicate the datasources. After that you should be able to see the application component DM in rsa1->infoSources. In application DM you should see all 8... infoSources and dataSources. If not, you should choose 'Settings->Display generated objects' from the top menu as already suggested.
    regards
    Siggi

  • Dtp error when loading data from one cube to another cube?

    hi,experts
      it seems strange that when I tick the some characteristics as navigational attributes in the cube , the error occurs during the execution of the DTP:error while updating to target Z* (Cube name ).
    once i turn the flag off , no error appear. could anyone give me a clue ?
    thanks in advance!

    Hi,
    When u make changes in the cube u need to make necessary changes in Transformation and activate the DTP.The checking of Navigational attributes in cube will appear in u r transformation as new fields where u need to create a mapping for them and then activate, also activate your DTP and then load the data. This should resolve your issue.
    Regards

  • Error when trying to load data from one cube to another

    Hi Friends
    I am getting an error when using extractor checker for datamart data source. The cube in question is compressed. this is what i get when i view the logs.
    SQL Error: 575-
    SQL0575N  View or materialized query table "SAPBWP./BIC/VZTCOOMC02F" cannot be used because.
    Please help
    Thanking you in anticipation
    Samuel

    Rememberme -
         No, the SAP_FACTVIEWS_RECREATE program cannot and will not uncompress the data. A fact view exists for every infocube which combines the E and F fact tables. You can see this view using SE11 -> View -> /bic/vxxxxf (where xxxxx is your infocube tech name). When you run this program this view is dropped and recreated thus eliminating any incosistencies that lead to the error posted in this thread.
    Hope this helps!

  • Loading data from Cube to Planning area

    Hi,
             If I am loading data from a cube to a planning area using transaction TSCUBE,
    does the system load data into planning area for the combinations that exist in the cube or does it load for all CVCs?
    For example,
    I have my CVC as Plant, Material, Customer
    If there are 4 CVCs in the POS that were previously generated as
    Plant--Material--Customer
    01--M1--
    C1
    01--M2--
    C3
    01--M2--
    C2
    01--M4--
    C5
    If the cube has data like this:
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    01--M2C3--
    20
    01--M2C2--
    5
    (doesnot have the last combination), then if I use TSCUBE transaction to load data to Planning area from this cube,
    is the data loaded as
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    01--M2C3--
    20
    01--M2C2--
    5
    Only for the 3 combinations that exist in the cube and not load anything for the last one
    OR
    is the data loaded as
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    01--M2C3--
    20
    01--M2C2--
    5
    01--M4C5--
    0
    Load all 4 combinations and send 0 as the cube doesnot have this combination?
    Hope I am clear on this question.
    Thanks.

    Thanks a lot Vinod, Srinivas and Harish. The reason why I am asking you is that we have a scenario where we get this situation.
    We initially get data from R/3 to BW to APO like the below:
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    Later when the customer is changed or bought out by somebody C1 is changed to C2. Some times when the business doesnot know who the customer is initially they just put C1 as dummy and then after sometime replace it by C2. Then the new record coming in is as follows:
    Plant--MaterialCustomer----Qty.
    01--M1C2--
    10
    BW can identify changes in transaction data  but not in Master data. What I mean by this is when Qty. 10 changes from 10 to 20, the system can identify it in deltas.
    If the customer (master data) changes to C2 from C1, the system thinks it's a new record all together then if I use delta loads, it gets me the following:
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    01--M1C2--
    10
    If I am looking at Plant and Material Level, my data is doubled.
    So we are planning to do a full load that works like this:
    1. Initial data like the below:
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    The CVC is created and the planning area has Qty.10
    Then we delete the contents of cube and do a full load into the cube with changed customer
    Plant--MaterialCustomer----Qty.
    01--M1C2--
    10
    This time a new CVC is created. Then we have another 10 loaded into Planning area.
    If the system loads all CVCs, then the it would send
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    0
    01--M1C1--
    10
    If the system loads only combinations in cube,
    then it loads
    Plant--MaterialCustomer----Qty.
    01--M1C2--
    10
    But the system already has another 10 for Customer C1 duplicating the values.
    We are trouble in the second case.
    We had to go fr this solution instead of realignment as our business has no way pf knowing that C1 was replaced by C2.
    Hope I am clear.

Maybe you are looking for