Loading date Not calculating Properly for Standard Order.

Hi Gurus,
I am facing issues in "OR" order type sales order where Loading date is not getting calculated correctly.
On discussion with the client it was clear that they tried to schedule the Order manually for couple of times.
But as much I believe Loading date should automatically be determined in SAP based on scheduling date.
can any one tell me if there is any OSS note available for this or do we have any alternate solution for this case.
Early reply Appreciated...
Thanks in Advance!!!!!!
Best Regards,

Hi All,
Any one who has faced this type of issue.

Similar Messages

  • Data Not coming Properly for 0HR_PA_OS_1 Data Source?

    Hi Experts,
    I am trying to load data to 0PAOS_C01 using 0HR_PA_OS_1 data source. For field 0POS_OCCVAC key figure i am not getting any data from Data Source.
    I checked in RSA3 for 0HR_PA_OS_1 data source and  in that it is not populating data for filed OCC_VAC_PERC  field. I checked with HR functional team and they mentioned its a BI issue.
    Kindly tell me how can i populate values for the particular field. FYI i am getting correct data for other fields.
    Please help me.
    Thanks

    The possible reasons
    1.Your user id might not be having the proper authorization to pull the HR data.This you can confirm with your basis guy,if you are unable to find what are the authorization roles required for HR data, for the time being you can take SAP_ALL authorization in development box and try to pull.
                            OR
    2.Try to pull from BW side,you may be able to see the data there because this uses the background user id used in RFC connection ( provided if your background user id having proper authorization ).

  • AED not calculated properly for imported capital Goods

    Dear All,
                 I am facing one error while capturing Excise Invoice for Imported capital goods .While performing this AED set off reflecting is 100% which is supposed to be 50%.For raw material its calculation is correct .Any solutions.                                                                               
    Thanks.

    Hi
    check following link
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/808c60ca-013b-2c10-34a2-94d1eb442e6f?QuickLink=index&overridelayout=true]
    Regards
    kailas ugale

  • Error while calculating variances for production order

    Hi Gurus,
    while calculating variances for production order i am getting the following error
    "Cannot calculate scrap variances" ( Error message)
    " no standard value estimate for material" (Warning message"
    A standard cost estimate exists for the material at the date mentioned in the error in released status.
    Please give solution for the error.
    Thanks in advance n Regards
    Arul.

    Is there an <b>itemization</b>, generated for the cost estimate used to calculate the target costs?
    Does the material components listed in the BOM of the cost estimate used to calculate the target costs, <b>assigned to the operations</b> in which they are used. Otherwise it is not possible to correctly report the variances and scrap when operations are confirmed.
    Does the order for which the variances are calculated have a valid <b>variance key.</b> ?
    Does the order have the status DLV (delivered) or TECO (technically completed). If the status was withdrawn, any variances and <b>scrap variances are canceled</b>.

  • How to edit data while loading data from W/O to Standard DSO?

    Hello,
    I am loading data from W/O to Standard DSO, during activation it got error out due to SID failure error for one infoobject(error is due to lowercase letter).But i can't change the infoobject setting and transformation.
    Is there any way to edit the data(either in W/O DSO or in new data of Standard DSO)?
    Thanks and regards,
    Himanshu.

    HI,
    Please check what is setting there in the transaction RSKC if it is set as ALL_CAPITAL then you must atleast chage the charecter setting, write a command in transformation, load to PSA and modify (Not applicable for BI7), Remove the setting in RSKC.(Not suggested).
    Cheers
    Vikram

  • RBA GATP check is not getting invoked for Sales Order

    Hi Everyone,
    RBA GATP check is not getting invoked for Sales order.
    I maintained the configuration settings for 'Rules-Based Availability Check', APO general settings (check mode, check instruction), carried out integrated rule maintenance, Rule determination for the combination of order type & product, associated the check mode to product master. Also maintained all the settings in ECC towards Req class, Req type, checking control etc.
    However, sales order is not invoking RBA Check though it is showing up the 'Rule' icon in the screen. Also, in the APO Availability check in Sales order when I click onto 'check instruction', I get the checking mode that pertains to RBA for business event 'A' (Sales order). Though I have not maintained any stock for the main material for which I have the sales order, yet system is confirming any quantity that I put in.
    I would expect that system would propose the same material in an alternate location where we have stock through RBA.
    Request you to share ideas on this.
    Regards,
    Avijit Dutta

    Hi Avijit,
    You should used No Checking Horizon in Checking instructions and also Check your rule control settings.
    What you have defined in 1st and 2nd steps. Check whether product substitution is carried out or Location Substitution.
    Thanks,
    Bala.

  • Power button not working properly for iphone 5. Warranty expired on 22 nov 2013 what to do?

    Hi,
    Power button not functioning properly for my iphone 5. Kindly give advice on what to do. Its warranty expired on 22nd november 2013.

    Read here:
    https://ssl.apple.com/support/iphone5-sleepwakebutton/

  • Accounting data not yet maintained for material 2010 R-1130-40

    Hi Guys
    I was trying to post a goods issue, but having a error that says -
    accounting data not yet maintained for material 2010 R-1130-40
    I then tried MM02 to maintain the accounting view, but also having an error that says -
    accounting 1 not active for the organizational level.
    Any ideas please as to what to do.
    Chears
    Kofiyahya

    Extend the Accounting view with Tcode :MM50
    Go to MM50 , select Maintenance status as "B" and enter Material number and click on execute (F8), then select the Material line item and click on Maintain Materials tab.
    Regards,
    Ramesh

  • Touch pad not working properly for iphone 4s

    touch pad not working properly for iphone 4s. Few letters are not working at all and my phone ios slowly loosing touch sensitivity. I lost my phone and got the new phone 10 months back.

    Try here >  iPhone:  Troubleshooting touchscreen response
    Also go to settings>general>reset>rest all settings phone will turn off and turn on by itself
    Once the phone is press and hold the home and power button at the same time wait for the apple sign then release the buttons phone will turn off and on.
    Update the software of your iphone or restore the phone to its factory settings

  • Due date not calculated in F-28

    Hello,
    Can anyone tell me if in standard SAP, in F-28 (incoming payment) why the due date (or payment date) is not calculated ?
    I fulfilled posting date and document date (both 01/09/2009) and payment terms also (Z100 - 90 days end of month), but after saving the document and when i check it in FB03, i found that payment date (or due date) still 01/09/2009 and not 30/11/2009.
    Can someone explain why and in which cases SAP dosn't calculate the due date ?
    In advance, thank you for help

    Hi,
    The transaction F-28 - Incoming payment, in general it is used for receiving payments.  Then what is your requirement to calculate due data from posting date of this document.  Are you referring to value date in the bank item?  The due date will be calculated from baseline date in invoice, in this case you need to check the baseline date in the invoice (open item), right?
    Correct me, if my understanding on your requirement is wrong.
    thanks,
    Kumar

  • Moving average price not calculated properly

    Hi,
    For a consumable material moving average price(MAP) is getting calculated wrongly.
    There are 2 goods receipts taken in Jan'08 and Feb'08 at a unit price of 1250 and 1450 INR.
    Then there are around 10 Goods issues for a cost centre, Mvt type 201 taken for next few months.
    The MAP value has been calculated properly after the Goods issues.
    Again there was a goods recipt in Oct'08 for 1275 INR.
    The goods issue done in Nov'08 has created a problem and it has calculated  wronlgy i.e. instead of Rs. 800, the system has calculated issue price as Rs.3500.
    No value has been changed in MR21. No PO's has been created between these days.
    Can anyone help us...??
    Regards,
    Ramya

    Hi Ramya,
    You have informed in your thread that "for a consumable material..", If a material is procured for direct consumption, the consumption accounts in Financial Accounting are posted when the goods receipt is entered . The total quantity and value of existing stocks of the material are not affected. There is no Goods Issue.
    Now, if you procure the material for stock, then changes in Material Valuation due to goods receipts and invoice receipts are carried out automatically (ofcourse manually also) when the relevant transaction is posted.
    The extent to which the stock value changes depends on the sequence in which the goods receipts and invoice receipts are posted. The SAP System allows for both possibilities:
    - When goods are received before the invoice, the stipulations in the purchase order are used as the basis for posting.
    - When the invoice is received before the goods, the details on the invoice are used as the basis for posting.
    So, please look into the Invoices and the relevant GR/IR clearing account details. You may get a clue there.
    Regards,
    Narayana.

  • Tax And pricing not calculating automatically on Purchase Order

    Hi All,
    While creating a Purchase order the Taxes are not calculating automatically .We need to manually enter the Tax on the Purchase order .The quantity conversion is not flowing properly so it is effecting the invoice receipt (not distributing the tax  on the invoice.Can any one please tell me the problem or the configuration to check this issue .
    Thanks in Advance

    Hi
    Please check all these below setting.
    1) Which tax procedure using.
    If TAXINJ  - Then check tax code using FTXP for valid tax code which you are using in PO.
    2) If TAXINN then check FV13 - for key combination such as Vendor /Material/Plant or Tax classification or Tax code/Vendor.
    depending upon your are using.
    3) Check Tax code is assigned to co code in Logistics - General-Tax on Goods Movements-India Condition-Based Excise Determination-Assign Tax Code to Company Codes
    4) Check J1ID for material & Chapter ID, Vendor Excise details, Excise determination.
    Once all this is ok then tax value will flow in to PO.
    Regards
    Sudhir

  • Delivery Date Re-Calculation in Stock Transfer Order PO

    Hi All,
    We have Transportation scheduling activated and maintain 'Transit Duration Times' in our Routes (Populated 'TransitDur' field in Route <0VTC>) R/3 46c
    When we create a stock transfer order the 'Delivery Date' in the STO PO is determined by the 'TransitDur' (Transit Duration) value maintained in the route between the 'Supplying and 'Receiving' plants.
    After creating the STO PO, if the delivery is delayed and we need to reflect this change in the STO, when we attempt to change the delivery date - the system re-calculates the delivery date using the date on which the changes are made as the starting point and extending out the full length of time based on the value in the 'TransitDur' field in the Route.
    This means we are not able to change the delivery date in the STO PO to a date that is later than the original delivery date but still earlier than the date re-calculated by the system using the date on which the changes are made as the starting point.
    Is anyone aware of any functionality/config which allows you to manually change the delivery date in the STO PO - but not be restricted to changing the date by the value in the 'TransitDur' field of the Route, when it is a subsequent change to the PO and greater than the original date determined by the system?
    Thanks,
    Ravelle

    A solution has not been identified for this issue...query closed.

  • PO Print preview is not appearing properly for the Bulgarian

    Hello Experts,
    We are facing an issue on PO output print preview and print.
    Where we are expecting the PO output was supposed to print Bulgarian
    language.
    Bulgarian letters are not appearing properly in PO print preview smart
    form
    We are able to see the Bulgarian letters in the GUI, when output gets
    processed in PO Spool output. And we are not able to see it in the
    portal .Its appearing as some junk characters
    Could you please provide me any pointers to resolve the issue?
    Looking forward your help.
    Thank you,
    Bharathi.

    Hi Ganesh,
    Thanks for your reply
    Can anybody tell me, is this is because of the PDF issue or output device issue?
    If the data is maintained in Bulgarian language, that we can see in portal.
    Where when we click on the PO Pint output preview, itu2019s not appearing as some junk characters only
    thank you
    bharathi

  • SortcompareFunction is not working properly for more than 1 column in advanced datagrid

    Hi Guys,
    I am using an advanced datagrid with groupingCollection.
    I have more than 1 grouped column. How ever I am using 2 sort compare function to sort date and time.
    The problem is when I am trying to sort date its workinf properly then when I jump to time column its not working and sorting few rows only inside the  column but not the entire column. samething happen when I sort time first and the date is not sorting.
    any help will be really appriciable .
    Thanks in advance.

    In our application we tend to use views to return appropriate values for a particular user.
    For example (we do building inspections) the publication item sql is like
    select * from inspection_sites where id in (select site_id from v_pda_bi_sites where bi_id=:bi_id)
    The view acts like a dynamic parameter table (in this cases looks at experience level, status of sites, and responsibility allocations). Once the driving views are tuned this works quite efficiently, and as the dependant tables for the publication item automatically includes all of the tables in the driving view, the object gets refreshed if there is any change to any of them, even if the site details themselves have not changed

Maybe you are looking for